Community discussions

Search found 7 matches

by boneyard21
Fri Jun 14, 2019 12:50 pm
Forum: General
Topic: Static route between 2 routers,2 networks
Replies: 7
Views: 432

Re: Static route between 2 routers,2 networks

Your firewall is allowing all which is not explicitly blocked. So that should be fine. add action=accept chain=forward connection-state=established add action=accept chain=forward connection-state=related add action=drop chain=forward connection-state=invalid Are the firewalls same for both routers...
by boneyard21
Fri Jun 14, 2019 12:24 pm
Forum: General
Topic: Static route between 2 routers,2 networks
Replies: 7
Views: 432

Re: Static route between 2 routers,2 networks

My reply might not be very constructive, but never the less: your routing is overly complicated and your firewall rule set is not safe at all. My suggestion: reset router to default (if it's a SOHO unit, else apply what's default firewall filter rule set on SOHO routers) and add simple static route...
by boneyard21
Fri Jun 14, 2019 11:25 am
Forum: General
Topic: Static route between 2 routers,2 networks
Replies: 7
Views: 432

Re: Static route between 2 routers,2 networks

Hi You have two relevant routes on each router: one without mark and one with mark. So, whether it's marked or not routing should work. Although the whole connection / routing marking for "to_LAN" looks unnecessary to me (in current context) -> one route entry WITHOUT mark should have been enough. ...
by boneyard21
Fri Jun 14, 2019 6:57 am
Forum: General
Topic: Static route between 2 routers,2 networks
Replies: 7
Views: 432

Static route between 2 routers,2 networks

Hi everyone, I try to setup a static route for 2 Lans communication. Now, PC2 and R2 are able to reach PC1 and R1. But PC1 is unable to reach PC2 and R2. And R1 is able to reach R2, not reach PC2. In addition, I have setup Qos for both network. Eventhough I set it off, nothing changed. Thank you for...
by boneyard21
Thu Jun 06, 2019 10:48 am
Forum: General
Topic: Join domain problem between two bridges [SOLVED]
Replies: 4
Views: 312

Re: Join domain problem between two bridges [SOLVED]

mkx, thanks!!

I have changed settings on RB4011, and it works!! :D
About your other advice, I will try to rearrange my network devices as well.
by boneyard21
Thu Jun 06, 2019 8:20 am
Forum: General
Topic: Join domain problem between two bridges [SOLVED]
Replies: 4
Views: 312

Re: Join domain problem between two bridges [SOLVED]

Hi mkx, Thanks for your reply. # jun/06/2019 13:13:32 by RouterOS 6.44.3 # software id = 0CZS-RSBM # # model = RB4011iGS+ # serial number = XXXXXX /interface bridge add name=bridge /interface ethernet set [ find default-name=ether8 ] mac-address=74:4D:28:88:E3:CC set [ find default-name=ether10 ] ma...
by boneyard21
Tue Jun 04, 2019 9:32 am
Forum: General
Topic: Join domain problem between two bridges [SOLVED]
Replies: 4
Views: 312

Join domain problem between two bridges [SOLVED]

Hi everyone, I setup bridge1(include port6~10 and spf+1) in RB4011iGS+ and bridge2(all ports) in CRS309-1G-8S+, then connect spf+1 of the two devices. My AD servers are in the bridge2, all computers in the bridge2 have no problem to join the domain. All computers under the bridge1 are able to ping A...