Community discussions

MikroTik App

Search found 18 matches

by pedroSwan
Mon Oct 14, 2019 8:42 pm
Forum: Beginner Basics
Topic: Philips Hue Stopped Working
Replies: 7
Views: 1233

Re: Philips Hue Stopped Working

This...............
/ip address
add address=192.168.1.1/24 comment=defconf interface=ether2 network=192.168.1.0

Change interface to bridge (not ether2).
I loose the Internet connection changing this?
by pedroSwan
Mon Oct 14, 2019 5:59 pm
Forum: Beginner Basics
Topic: Philips Hue Stopped Working
Replies: 7
Views: 1233

Re: Philips Hue Stopped Working

Yes, reboot, DHCP, static IP.. still do different. Perfect inside the network
by pedroSwan
Sun Oct 13, 2019 11:23 pm
Forum: Beginner Basics
Topic: Philips Hue Stopped Working
Replies: 7
Views: 1233

Re: Philips Hue Stopped Working

Thanks. Already done. You aren’t able to configure DNS on the Hue.
by pedroSwan
Sun Oct 13, 2019 10:09 pm
Forum: Beginner Basics
Topic: Philips Hue Stopped Working
Replies: 7
Views: 1233

Philips Hue Stopped Working

I have been happily using my Philips Hue for some time until the change from ISP modem to Mikrotik, now I am only able to access the Hue Bridge from inside the network not outside. I don't believe that forwarding is necessary, it wasn't before. Hue bridge is at 192.168.1.118 Hue sits on Ether7 > /ex...
by pedroSwan
Tue Oct 08, 2019 7:35 pm
Forum: Beginner Basics
Topic: Connecting Two Mikrotik routers / Two Subnets
Replies: 11
Views: 3990

Re: Connecting Two Mikrotik routers / Two Subnets

/ip route print detail Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit 0 ADS dst-address=0.0.0.0/0 gateway=192.168.1.1 gateway-status=192.168.1.1 reachable via ether1 distance=1 scope=30 target-s...
by pedroSwan
Mon Oct 07, 2019 11:28 pm
Forum: Beginner Basics
Topic: Connecting Two Mikrotik routers / Two Subnets
Replies: 11
Views: 3990

Re: Connecting Two Mikrotik routers / Two Subnets

Yes

R1 Ether5 >>>>>> R2 Ether1 🤔

DHCP on R1 192.168.1.xxx
DHCP on R2 10.0.0.xxx

I’m wirelessly connected to R2 as I type!
by pedroSwan
Mon Oct 07, 2019 10:10 pm
Forum: Beginner Basics
Topic: Connecting Two Mikrotik routers / Two Subnets
Replies: 11
Views: 3990

Re: Connecting Two Mikrotik routers / Two Subnets

Thanks of the replies. I'm afraid neither worked and I thought I'd give a default config a go and BINGO! R1 Config # oct/07/2019 20:03:32 by RouterOS 6.45.6 # software id = 0273-98QJ # # model = 2011UiAS # serial number = R1 SERIAL /interface bridge add admin-mac=R1 MAC auto-mac=no comment=defconf n...
by pedroSwan
Sun Oct 06, 2019 9:46 pm
Forum: Beginner Basics
Topic: Connecting Two Mikrotik routers / Two Subnets
Replies: 11
Views: 3990

Re: Connecting Two Mikrotik routers / Two Subnets

R1 /export # oct/06/2019 19:46:44 by RouterOS 6.45.6 # software id = 0273-98QJ # # model = 2011UiAS # serial number = ******* /interface bridge add admin-mac=D4:CA:******4 auto-mac=no comment=defconf name=bridge /interface pppoe-client add add-default-route=yes disabled=no interface=ether1 name=ppp...
by pedroSwan
Sun Oct 06, 2019 1:33 pm
Forum: Beginner Basics
Topic: Connecting Two Mikrotik routers / Two Subnets
Replies: 11
Views: 3990

Re: Connecting Two Mikrotik routers / Two Subnets

So my modest (nay novice) skill level still won't allow traffic to the internet from R2.
by pedroSwan
Sat Oct 05, 2019 4:29 pm
Forum: Beginner Basics
Topic: Connecting Two Mikrotik routers / Two Subnets
Replies: 11
Views: 3990

Connecting Two Mikrotik routers / Two Subnets

Hi All Can someone help me with the steps through to getting two Mikrotik Routers working together on different subnets. R1 is (RB2011Uias) works just fine using PPPoE to my Fibre modem. R1 is at 192.168.1.1/24 with DHCP 192.168.1.10 - 192.168.1.30, NAT enabled. R2 is (RB2011UAS-2HND-IN) I would lik...
by pedroSwan
Thu Jul 04, 2019 5:21 pm
Forum: Beginner Basics
Topic: Help needed with config
Replies: 9
Views: 1324

Re: Help needed with config

Thanks guys... I'm head over to the link you sent anav..... via my ever deepening rabbit hole :)

Hands on learning is definitely the way for me (with you guys help). Thanks again for the patience!
by pedroSwan
Wed Jul 03, 2019 11:31 pm
Forum: Beginner Basics
Topic: Help needed with config
Replies: 9
Views: 1324

Re: Help needed with config

I am curious why you elected to have /ip dhcp-server set to the bridge , but then, assign /ip address to ether2 I am just curious as how assigning it to ether2 is going to magically translate to all the other ether ports?? ;-) :D If you are curious then I certainly am. I'm not really sure how I hav...
by pedroSwan
Wed Jul 03, 2019 9:17 pm
Forum: Beginner Basics
Topic: Help needed with config
Replies: 9
Views: 1324

Re: Help needed with config

Sorry yes. I had selected "No Default Configuration" Here is what I have - correctly have! [Pie@MikroTik] > /export # jul/03/2019 19:12:04 by RouterOS 6.44.3 # software id = 02xx-xxxx # # model = 2011UiAS # serial number = 44444444443 /interface bridge add admin-mac=D4:xx:6D:xx:xx:xx auto-mac=no com...
by pedroSwan
Wed Jul 03, 2019 7:22 am
Forum: Beginner Basics
Topic: Port Forwarding (AND MORE) Still Not Working [SOLVED]
Replies: 4
Views: 1303

Re: Port Forwarding (AND MORE) Still Not Working [SOLVED]

Thanks, I resorted to that. Linked thread is where I’m at. Thanks

viewtopic.php?f=13&t=149847
by pedroSwan
Tue Jul 02, 2019 9:05 pm
Forum: Beginner Basics
Topic: Port Forwarding (AND MORE) Still Not Working [SOLVED]
Replies: 4
Views: 1303

Re: Port Forwarding (AND MORE) Still Not Working [SOLVED]

Thanks anav, really appreciate the reply. Ether1 is connected directly to the VDSL router which is at 192.168.1.1 As for the forward to 69, that is typo and should have read 6690 for VPN. I have moved on a little now, or backwards and have gone back to a clean but probably vulnerable config. Sorry f...
by pedroSwan
Tue Jul 02, 2019 9:01 pm
Forum: Beginner Basics
Topic: Help needed with config
Replies: 9
Views: 1324

Help needed with config

Hi all I really am learning (steeply) with the MikroTik Router and I don't have enough fingers to count the times I have 'Reset Configuration' to get where I am but you will think this is not very far. I can't help that I am missing something... Firewalls rules for a start. Here is my current config...
by pedroSwan
Mon Jul 01, 2019 12:56 am
Forum: Beginner Basics
Topic: Port Forwarding (AND MORE) Still Not Working [SOLVED]
Replies: 4
Views: 1303

Port Forwarding (AND MORE) Still Not Working [SOLVED]

I have tried everything I possibly can to get my Port Forwarding working. I have a VDSL2 modem sat ahead of my Mikrotik Router. Router is at 192.168.1.1. WAN is static address at 82.xxx.xxx.xxx (we'll call it 82.111.111.111 for ease of explanation) I really would like to get the Port Forwarding set ...
by pedroSwan
Fri Jun 28, 2019 11:12 pm
Forum: Beginner Basics
Topic: Guide for connection mikrotik router with dsl isp modem/router
Replies: 11
Views: 12144

Re: Guide for connection mikrotik router with dsl isp modem/router

Is there a basic guide provided by Mikrotik of how to connect the routers with modem? I'm not sure if there is one. Here is what you'll need to do. Plug the ISP modem into ether1 on the MikroTik. This will become your WAN port. The other ports will become switch ports called bridge-LAN . Below is a...