What is the best for pcc
src address and port or both address and port

any help !!

PLS HELP ME

I AM USING ONLY HOTSPOT, PPPOE
wan rx bytes more than lan tx bytes
when users no queue no difference

Thank you for your help, I'm grateful to you

i edit my script is it right ? /ip firewall mangle add action=jump chain=prerouting connection-state=new jump-target=pr-cm add action=accept chain=prerouting in-interface-list=WAN add action=mark-routing chain=prerouting connection-mark=WAN1 new-routing-mark=WAN1 passthrough=no add action=mark-routi...

what is your suggest to do for load balancing !
other question - user input and forward to incoming connections from internet interfaces or use prerouting


and thanks for your reply and help

/ip route add distance=1 gateway=pppoe-out3 routing-mark=ISP3_Route add distance=1 gateway=pppoe-out1 routing-mark=ISP1_Route add distance=1 gateway=pppoe-out2 routing-mark=ISP2_Route add distance=1 gateway=pppoe-out4 routing-mark=ISP4_Route add distance=1 gateway=pppoe-out1 add distance=2 gateway=...

is my pcc configration is correct ? or any other suggest thanks for all /ip firewall address-list add address=192.168.88.0/24 list=connected /ip firewall mangle add action=accept chain=prerouting dst-address-list=\ connected src-address-list=connected add action=mark-connection chain=input connectio...

You're Indian, I'm Indian, so I can be of more help in the context of Indian ISPs. Did you bridge ACT's ONT/Router if any? Did you bridge Airtel's ONT/Router if any? Is your Tik handling both ISPs completely? That is you have two PPPoE clients? If above is yes then you got it 99% done. There are so...

i have three line each line 30 MB download and 10MB upload
i want to combine the three lines to get 90MB download and 30MB upload
and thanks

any other solutions
i tried wiki pcc script but upload not combine

@sindy
load balance script
And thank you

disneyland ???

i have three line each line 30 MB download and 10MB upload
i want to combine the three lines to get 90MB download and 30MB upload
i want the script and thanks

Board: RB4011iGS+5HacQ2HnD Problem: on all ros 6.44.x-6.45.x on PPP client/server interfaces (L2TP, PPTP, PPPoE) appear at the same time small Tx Drops counters. On ros 6.43.16 works well on same config. /ip neighbor discovery-settings set discover-interface-list=none dropped packet are discovery p...

/ip neighbor discovery-settings
set discover-interface-list=none

dropped packet are discovery packet

set discover interface without pppoe-client by using interface list

/ip neighbor discovery-settings
set discover-interface-list=none

dropped packet is discovery packet