Community discussions

Search found 14 matches

by martin4030
Tue Aug 06, 2019 7:26 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]

Thanks for the help, and support and review :) I did change: Firewall /ip firewall filter add action=accept chain=input connection-state=established,related comment="Accept established related" add action=accept chain=input in-interface= bridge1 -> ether2 comment="Allow LAN access to router and Inte...
by martin4030
Tue Aug 06, 2019 7:26 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]

I did change: Firewall /ip firewall filter add action=accept chain=input connection-state=established,related comment="Accept established related" add action=accept chain=input in-interface= bridge1 -> ether2 comment="Allow LAN access to router and Internet" add action=drop chain=input comment="Drop...
by martin4030
Tue Aug 06, 2019 5:44 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]

My notes for a new install any changes? 2) /user add name=new user password=XXXXXXXX group=full /user remove admin 3) /user set 0 address=192.168.1.0/24 /ip service set winbox address=192.168.1.0/24 4) /ip service disable telnet,ftp,api,api-ssl 5) /tool mac-server set allowed-interface-list=none 6) ...
by martin4030
Tue Aug 06, 2019 5:41 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

FIXED (ISP error) PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]

Hi all, thanks for your time. after testing and testing, i contacted my ISP again and told them somethings very wrong, even that i get a wan ip there must be a error. he said, it does not look wrong but as a safety they restarted the fiberbox that im hooked up to in the road, and also restarted my f...
by martin4030
Tue Aug 06, 2019 4:44 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: 10 hours - no luck getting WAN/INET to work (CCR1009-7G-1C-1S+) [SOLVED]

Once more:
If you try to ping gateway, does it work? Or traceroute to some numeric address in internet (e.g. 8.8.8.8), does it get anywhere? Both from router.
I tryid yesterday to ping - NO responce. Doing Traceroute - It never left the router. I will look more at it when i return home.
by martin4030
Tue Aug 06, 2019 2:50 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]

Hi, looks like that is okay.
[admin@MikroTik] > /system routerboard print
routerboard: yes
model: CCR1009-7G-1C-1S+
serial-number: 914F0A6D66B4
firmware-type: tilegx
factory-firmware: 6.42.12
current-firmware: 6.45.3
upgrade-firmware: 6.45.3
[admin@MikroTik] > 
by martin4030
Tue Aug 06, 2019 1:58 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: 10 hours - no luck getting WAN/INET to work (CCR1009-7G-1C-1S+) [SOLVED]

Here is my config backup! I have not internet still, and router cant still not ping internet from it self. Could it be the routerbord firmware? Mine says 6.45.3 but on download page it says tilegx_3.41.fwf or is that someting else. Just thinking of what it can be as i think Routerbord follows Router...
by martin4030
Tue Aug 06, 2019 10:39 am
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: 10 hours - no luck getting WAN/INET to work (CCR1009-7G-1C-1S+) [SOLVED]

I been in contact with my ISP to be safe, and everything is fine in there ned. They could see the router taking a WAN ip etc. I dont know what to do, so i did reset it all - setup using quick conf and as a (try) i have now change my MAC adresse on the WAN interface. I now need to wait another hour f...
by martin4030
Mon Aug 05, 2019 10:18 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: 10 hours - no luck getting WAN/INET to work (CCR1009-7G-1C-1S+) [SOLVED]

Thanks for helping out everyone: XX is just me hiding :) /ip dhcp-client print [admin@MikroTik] > /ip dhcp-client print Flags: X - disabled, I - invalid, D - dynamic # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS 0 ether1 yes yes bound 87.104.8.1XX/25 /ip address print [admin@MikroTik] > ...
by martin4030
Mon Aug 05, 2019 9:56 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: 10 hours - no luck getting WAN/INET to work (CCR1009-7G-1C-1S+) [SOLVED]

I change to your recommandations, and i did now also add under DHCP to use 'Add Default Route:' to yes along with use peer dns. Still no internet. [admin@MikroTik] > export compact hide-sensitive # jan/02/1970 00:33:54 by RouterOS 6.45.3 # software id = WVIR-4QDS # # model = CCR1009-7G-1C-1S+ # seri...
by martin4030
Mon Aug 05, 2019 9:39 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: 10 hours - no luck getting WAN/INET to work (CCR1009-7G-1C-1S+) [SOLVED]

DHCP is set on Ether1 [admin@MikroTik] > export compact hide-sensitive # jan/02/1970 00:19:22 by RouterOS 6.45.3 # software id = WVIR-4QDS # # model = CCR1009-7G-1C-1S+ # serial number = 914F0A6D66B4 /interface list add name=WAN add name=LAN /interface wireless security-profiles set [ find default=y...
by martin4030
Mon Aug 05, 2019 9:12 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

Re: 10 hours - no luck getting WAN/INET to work (CCR1009-7G-1C-1S+) [SOLVED]

Hi Sob,

It's just me hiding my WAN IP :)

So i need to put this in
/ip route
add distance=1 gateway=WAN IP
Is it not possible to make it dynamic as my IP could change, as its dynamic ? i will still try it.
by martin4030
Mon Aug 05, 2019 9:00 pm
Forum: Beginner Basics
Topic: PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]
Replies: 24
Views: 1379

PLEASE HELP - no luck getting it to work / CCR1009-7G-1C-1S+ [SOLVED]

Hi everyone, I been trying all day to get my new router to work, model: (CCR1009-7G-1C-1S+) i been trying quickset, i been following guides, looking at the manual, looking at youtube. I can't even get the router to ping the outside, on it's own. I even looked at my old config, using a CRS as router ...
by martin4030
Fri Aug 02, 2019 12:30 pm
Forum: Beginner Basics
Topic: Router for 1Gbit Wan from Mikrotik (What model?)
Replies: 4
Views: 687

Router for 1Gbit Wan from Mikrotik (What model?)

Hi all, I tryid to change my Unifi USG-3 + Unifi Switch into a Mikrotik Crs328-24P-4S+RM booted into RouterOS. I could not get WAN speeds above 400 mbit with no speciel firewall rules. I did change back to the small UNIFI USG-3 and i got 513mbit down / 480 upload. My line is 500/500 fiber. I did set...