Community discussions

MikroTik App

Search found 69 matches

by jonah1810
Thu Jul 15, 2021 6:09 am
Forum: Scripting
Topic: Queue Tree Data Usage Script
Replies: 1
Views: 297

Re: Queue Tree Data Usage Script

Here is the script { local addr value=[:toarray ""] local listname value=[:toarray ""] local listlimit value=[:toarray {"Surfer";107374182400;"Streamer";644245094400;"Binger";858993459200;"Business";1610611911367}] #loop through address pac...
by jonah1810
Thu Jul 15, 2021 6:08 am
Forum: Scripting
Topic: Queue Tree Data Usage Script
Replies: 1
Views: 297

Queue Tree Data Usage Script

I have created a script to track customer data usage when using a queue tree. I based my queue tree off of: https://mum.mikrotik.com/presentations/CZ09/QoS_Megis.pdf WARNING: as this script uses a lot of mangle rules it is not very cpu efficient, but I optimized it the best I knew how. this script i...
by jonah1810
Fri Jul 09, 2021 9:38 pm
Forum: Beginner Basics
Topic: edit or change interface configuration [SOLVED]
Replies: 4
Views: 581

Re: edit or change interface configuration [SOLVED]

wait did that original command work?!
should be something like:

/interface bridge
add name=Bridge comment="defconf"

/interface bridge port
add interface=ether15 bridge=Bridge

/interface bridge
set [find where name=Bridge] comment="Changed value example"
by jonah1810
Fri Jul 09, 2021 9:29 pm
Forum: Beginner Basics
Topic: It's another "pcq limit total limit"
Replies: 2
Views: 399

Re: It's another "pcq limit total limit"

https://www.google.ca/url?sa=t&source=w ... Gf8w1OsIG5

is great reading on pcq queue and queue trees.
by jonah1810
Fri Jul 09, 2021 8:43 pm
Forum: General
Topic: Low Speed When Bonding
Replies: 0
Views: 476

Low Speed When Bonding

Hello im having an issue with my bonded wireless connection. I cant seem to get more than 30-50mbps through it when im bonding the connection on a single connection count. here is the physical setup: RB4011(E2) -> AF5XHD -> HEX POE(E2) RB4011(E3)->AF5XHD-> HEX POE(E3) I added vlans to the interfaces...
by jonah1810
Fri Jul 09, 2021 1:03 am
Forum: Wireless Networking
Topic: 6ghz and Automated Frequency Coordination
Replies: 3
Views: 552

Re: 6ghz and Automated Frequency Coordination

Mikrotik doesn't even have full 802.11ac support. I don't see them doing anything for the upcoming bands/ATC any time soon!


But hey I'm praying I'm wrong.
by jonah1810
Sat Jul 03, 2021 5:58 am
Forum: General
Topic: NAT, masquerading, src, dst? Confused (picture) [SOLVED]
Replies: 5
Views: 680

Re: NAT, masquerading, src, dst? Confused (picture) [SOLVED]

Could you not just create a virtual wlan on the ap to connect to the wifi instead of using the 2 mAP's?
by jonah1810
Tue Jun 22, 2021 5:53 am
Forum: Scripting
Topic: How to use output from ssh-exec? [SOLVED]
Replies: 2
Views: 829

Re: How to use output from ssh-exec? [SOLVED]

:set $Query value=[:put ([/system ssh-exec address=10.100.97.213 user=root command= \
("mysql freeradius -e \"SELECT username, '@split', CONCAT(firstname, ' ', lastname) AS 'Full Name' FROM userinfo;\"") as-value]->"output")]
to save output as variable!
by jonah1810
Mon Jun 21, 2021 11:12 pm
Forum: Scripting
Topic: How to use output from ssh-exec? [SOLVED]
Replies: 2
Views: 829

Re: How to Login to Remote linux server via mikrotik SSH key? [SOLVED]

Figured it out the issue was i was trying to login as root but that was set to no. I changed it so only with the key I can login as root. But im having issues getting values from my server heres what i have: :set $name value=[system ssh-exec address=10.100.97.213 user=root command= \ "mysql fre...
by jonah1810
Mon Jun 21, 2021 7:18 pm
Forum: Scripting
Topic: How to use output from ssh-exec? [SOLVED]
Replies: 2
Views: 829

How to use output from ssh-exec? [SOLVED]

EDIT: first problem was solved I changed the name of the title to match the problem i now have instead of making a entire new thread. I will keep the original issue in case somebody might have a similar issue My issue now is i cant get ssh-exec's output set as a variable. Hello I am trying to set up...
by jonah1810
Fri Jun 18, 2021 5:16 am
Forum: General
Topic: Bonding 2 Wireless Link
Replies: 2
Views: 369

Re: Bonding 2 Wireless Link

Okay so if i am understanding correctly, and based off of https://help.mikrotik.com/docs/display/ROS/Layer2+misconfiguration#Layer2misconfiguration-BondingbetweenWirelesslinks instead of untagged vlan 110 and 100 in the switch try putting tagged vlan 110 and 100 on Router A and bond the vlans like y...
by jonah1810
Thu Jun 17, 2021 6:59 pm
Forum: Scripting
Topic: Scrpit to enable or disable interface list [SOLVED]
Replies: 6
Views: 1101

Re: Scrpit to enable or disable interface list [SOLVED]

/interface list member disable [find where list="your-list"]


/interface list member enable [find where list="your-list"]
by jonah1810
Thu Jun 17, 2021 1:03 am
Forum: Beginner Basics
Topic: 2 Existing Wireless Backhauls - need bonded
Replies: 4
Views: 609

Re: 2 Existing Wireless Backhauls - need bonded

I just set this up over some Ubiquiti backhauls. DO NOT use the mikrotik bonding example on the main page. it is meant for direct connection between routers. I had 20-50% packet loss using that configuration. instead here is an example of how to configure it : (scroll down to the solution) https://w...
by jonah1810
Thu Jun 17, 2021 12:56 am
Forum: General
Topic: DHCP v6 error
Replies: 2
Views: 389

Re: DHCP v6 error

This is a dhcpv6-pd server or client?
post: an export of the dhcpv6 - pd server / client and post an export of the ipv6 pools.
by jonah1810
Sun Jun 13, 2021 10:18 am
Forum: Scripting
Topic: A Better Wireless Auto Frequency Selection
Replies: 10
Views: 1596

Re: A Better Wireless Auto Frequency Selection

Well that is exactly what I am doing now. I just mean i cant use if ($ScanLine~"(802.11|nv2|nstreme)") because it will come back true and and then :set $ScansSignal value=[:pick $ScanLine [find $ScanLine ",-"] ([find $ScanLine "$y"] -1)] will have a chance of setting a ...
by jonah1810
Sat Jun 12, 2021 11:56 pm
Forum: Scripting
Topic: A Better Wireless Auto Frequency Selection
Replies: 10
Views: 1596

Re: A Better Wireless Auto Frequency Selection

Jotne use the command: /interface wireless wlan2 scan duration=30s save-file=Scan5.rsc While i cant do what you suggest in your newest post because of the line ":set $ScansSignal value=[:pick $ScanLine [find $ScanLine ",-"] [find $ScanLine ",nstreme"]]" I was able to sh...
by jonah1810
Sat Jun 12, 2021 10:56 am
Forum: Scripting
Topic: A Better Wireless Auto Frequency Selection
Replies: 10
Views: 1596

Re: A Better Wireless Auto Frequency Selection

Do you need all variable to be global? if not use local.
oops, i forgot to change that back, i only had it global to easily read values in winbox!
by jonah1810
Sat Jun 12, 2021 9:48 am
Forum: Scripting
Topic: A Better Wireless Auto Frequency Selection
Replies: 10
Views: 1596

Re: A Better Wireless Auto Frequency Selection

added complete 5ghz script and removed 2.4ghz script. will update with a complete version soon.
by jonah1810
Tue Jun 08, 2021 7:22 pm
Forum: Beginner Basics
Topic: Queuing = Preventing one host from hogging all the bandwidth
Replies: 2
Views: 431

Re: Queuing = Preventing one host from hogging all the bandwidth

why not just put 1 simple queue in the sxt for the host you want to limit?

that way it's not limiting your LAN speed.
by jonah1810
Tue Jun 08, 2021 12:25 am
Forum: Beginner Basics
Topic: DHCP Relay configuration [SOLVED]
Replies: 8
Views: 839

Re: DHCP Relay configuration [SOLVED]

Export your config! both of the router and the access point so can somebody can help you.
by jonah1810
Sat Jun 05, 2021 10:46 pm
Forum: General
Topic: Let MikroTik support access my router
Replies: 18
Views: 1176

Re: Let MikroTik support access my router

if I'm understanding correctly this is your edge router, the one directly facing the internet? well you don't need to port forward for access to the router. you only port forward for access past the router. ie trafffic that needs to be forwarded. just create a filter rule with action accept in chain...
by jonah1810
Sat Jun 05, 2021 4:40 am
Forum: Wireless Networking
Topic: Questions about TKIP
Replies: 10
Views: 1079

Re: Questions about TKIP

yes, sorry not garbage but recycling. I was just wanting to clarify as the grammar was not perfect! okay yeah that is exactly how i feared. One last question, if the virtual interface is tkip and the physical interface is aes. can the physical interface still run on 802.11n while the virtual interfa...
by jonah1810
Sat Jun 05, 2021 3:18 am
Forum: Wireless Networking
Topic: Questions about TKIP
Replies: 10
Views: 1079

Re: Questions about TKIP

just to clarify, You're saying to throw the printer into the garbage? if it were my printer I would agree. however telling my customers that they have to throw out their printer when i install them is not viable option. could you at least tell me what's wrong with going with the virtual interface ap...
by jonah1810
Sat Jun 05, 2021 12:27 am
Forum: Wireless Networking
Topic: Questions about TKIP
Replies: 10
Views: 1079

Questions about TKIP

Hello, I'm trying to figure out the best option for wireless security in my customers routers. aes is obviously the better choice. but some older devices (printers 99% of the time) can only connect via tkip. so if i enable both the printer connects. however when i enable both certain aes devices, mo...
by jonah1810
Thu Jun 03, 2021 12:30 am
Forum: Forwarding Protocols
Topic: OSPFv3 + DHCPV6 Relay Not Routing Correctly
Replies: 3
Views: 931

Re: OSPFv3 + DHCPV6 Relay Not Routing Correctly

Thank you both for the information! I will just use the less centralized approach of having Router 2 as the server. I am hoping ipv6 gets developed a lot further in v7.
by jonah1810
Tue Jun 01, 2021 4:12 am
Forum: Forwarding Protocols
Topic: OSPFv3 + DHCPV6 Relay Not Routing Correctly
Replies: 3
Views: 931

OSPFv3 + DHCPV6 Relay Not Routing Correctly

Hello I'm having difficulties setting up a dhcpv6 relay through ospfv3 and i'm not sure if its a configuration issue or just broken/incompatible as I know ipv6 implementation is far from complete thus far. I have 2 sites connected by ospf on a vlan called "Fiber Trunk". (Site 1) Router 1 I...
by jonah1810
Thu May 27, 2021 12:34 am
Forum: General
Topic: any working dhcp - client ipv6 working example?
Replies: 8
Views: 677

Re: any working dhcp - client ipv6 working example?

Currently routeros only supports dhcpv6 prefix delegation. set your client to only receive prefix and not address and use slaac on dhcp client to redistribute that prefix.
by jonah1810
Thu May 13, 2021 1:30 am
Forum: Scripting
Topic: Script to email total bytes and reset counters
Replies: 4
Views: 896

Re: Script to email total bytes and reset counters

Good catch extended! I wasn't by a computer where i could check if it worked. i just assumed it was the same as other places where "bytes" is a stat. My apologies for the misinformation.
by jonah1810
Wed May 12, 2021 8:45 pm
Forum: Scripting
Topic: Script to email total bytes and reset counters
Replies: 4
Views: 896

Re: Script to email total bytes and reset counters

EDIT: my script will work only on places where bytes returns "tx/rx" value. a much simpler script was shared by rextended below. As luck would have it i made a similar script for pulling total bytes from simple queue im sure you can adapt it. { :local bite :local ubyte :lotal dbyte :local ...
by jonah1810
Mon May 10, 2021 5:26 am
Forum: Scripting
Topic: A Better Wireless Auto Frequency Selection
Replies: 10
Views: 1596

A Better Wireless Auto Frequency Selection

Hello, since Mikrotik's frequency=auto is so terrible (it chooses Channel with least amount of AP's Regardless of Signal) I have created one that selects channel based off signal. My original 2.4ghz script that i posted here was incomplete and as such I have taken it down. In its stead is a 5Ghz scr...
by jonah1810
Wed Apr 28, 2021 7:01 pm
Forum: General
Topic: Bridge Filter Vlans Not Working
Replies: 7
Views: 679

Re: Bridge Filter Vlans Not Working

Why would you untag vlan300 to the hex?? Makes no sense like pretty much the rest of your config. Your best bet is to read this excellent article, and I am sure you will be up and runnning in no time. https://forum.mikrotik.com/viewtopic.php?f=23&t=143620 The HEX was in place so i could test it...
by jonah1810
Tue Apr 27, 2021 5:45 pm
Forum: General
Topic: Bridge Filter Vlans Not Working
Replies: 7
Views: 679

Re: Bridge Filter Vlans Not Working

You need to provide a network diagram. For example nothing lines up on your RB4011 config, vlans not defined, etc. As noted get rid of service tag........... I am confused I thought the trunk is supposed to be tagged. I am just trying to get one of the vlans to work and once thats done i'll work on...
by jonah1810
Tue Apr 27, 2021 6:30 am
Forum: General
Topic: Bridge Filter Vlans Not Working
Replies: 7
Views: 679

Re: Bridge Filter Vlans Not Working

I would need to see the full config on all the devices.... Hello, thank you for replying! I have updated the OP with the 4011 config and the Hex config. I also discovered in the hosts tab that it can see the HEX on SFP2 with a VID of 300. not sure why it isn't being passed along to SFP1. interface ...
by jonah1810
Tue Apr 27, 2021 1:44 am
Forum: General
Topic: first ipv6 experience
Replies: 1
Views: 331

Re: first ipv6 experience

it's not clear what you want to accomplish here but to enable slaac the address must be /64 and then advertise=yes. as to incomplete settings: there is only dhcpv6-Prefix Delegation no dhcvp6. If you are receiving an address via slaac i believe it is very difficult to find what that address is. (i d...
by jonah1810
Tue Apr 27, 2021 1:27 am
Forum: General
Topic: Bridge Filter Vlans Not Working
Replies: 7
Views: 679

Bridge Filter Vlans Not Working

Hello I have a CRS309-1G-8S that I am trying to configure as a switch with vlans. I followed the Documentation on bridge filtering but nothing works and im wondering what im doing wrong, or if the documentation was wrong. here is my setup: I have a 4011 acting as a router, the CRS as a Switch and my...
by jonah1810
Thu Apr 22, 2021 1:22 am
Forum: Wireless Networking
Topic: Guest Dhcp server relay
Replies: 1
Views: 443

Re: Guest Dhcp server relay

There's really no need for a dhcp relay here. put main router all in bridge with your repeater. 1 DHCP server on main router for that. create Vlan with seperate dhcp server for guest network. bridge vlan with guest network interface. unless you are trying to seperate all 3 wireless networks (main, r...
by jonah1810
Wed Apr 21, 2021 7:17 pm
Forum: Beginner Basics
Topic: hAP ac lite as NAT device
Replies: 2
Views: 318

Re: hAP ac lite as NAT device

AP Bridge. 802.11. The other options are for receiving not transmitting. add wlan to bridge

Sent from my SM-G955W using Tapatalk

by jonah1810
Wed Apr 21, 2021 7:13 pm
Forum: Beginner Basics
Topic: Load Balancing apparently unbalanced
Replies: 1
Views: 324

Re: Load Balancing apparently unbalanced

PCC is Per Connection Classifier. each connection will be put on one WAN or the other WAN. so if you have connections of unequal size it will be more on the one. The more connections you have going through it the more balanced it will be.

Sent from my SM-G955W using Tapatalk

by jonah1810
Tue Mar 16, 2021 8:21 pm
Forum: Beginner Basics
Topic: Simple queue that covers all traffic on a single ethernet port.
Replies: 1
Views: 237

Re: Simple queue that covers all traffic on a single ethernet port.

Is it a bridged port? queue bridge instead. if you really needed just that one port queued you should look at seperating the traffic via vlans.

you can also target whole subnets ie. "192.168.88.0/24"

Sent from my SM-G955W using Tapatalk

by jonah1810
Mon Feb 22, 2021 11:39 pm
Forum: Wireless Networking
Topic: WPS unicast exchange key timeout
Replies: 0
Views: 402

WPS unicast exchange key timeout

Hello, I was trying to set up a printer to my clients hap-lite but it would just connect and then disconnect repeatable until the printers wps stopped. kept saying unicast exchange key timeout. signal was fine, i tried every option possible for unicast in the security profiles (aes, tkip, both) just...
by jonah1810
Wed Dec 23, 2020 3:21 am
Forum: Scripting
Topic: Yet another DHCP to DNS script
Replies: 28
Views: 19839

Re: Yet another DHCP to DNS script

I'm confused about the purpose of this script. why add dns entries for each user? shouldn't you just set up all users to the same 2-3 stable servers under dhcp-server/network for dns lookup?

Sent from my SM-G955W using Tapatalk

by jonah1810
Wed Dec 23, 2020 3:04 am
Forum: Beginner Basics
Topic: LHG HP5 benefits over LHG 5 [SOLVED]
Replies: 4
Views: 692

Re: LHG HP5 benefits over LHG 5 [SOLVED]

You can achieve more signal, but only 1km on an LHG (HP or not) is way too powerful. you'll need to reduce tx-power on both sides or purposely mis-align the dish to not get too much signal. just make sure you stay out of the 30s. you'll likely run into issues with this much signal. I didn't realize ...
by jonah1810
Tue Nov 24, 2020 6:21 pm
Forum: Beginner Basics
Topic: Queue and Mangle Questions
Replies: 2
Views: 495

Re: Queue and Mangle Questions

1. this is normal behaviour. the first one is catching only data with that src address, the packet mark rule is catching everything with that connection mark. 2. https://wiki.mikrotik.com/wiki/Manual:Packet_Flow_v6 3. Never tried this but Your queue tree will likely use more cpu than the rest of the...
by jonah1810
Mon Nov 23, 2020 8:16 pm
Forum: Scripting
Topic: Get MAC address [SOLVED]
Replies: 4
Views: 1103

Re: Get MAC address [SOLVED]

I've never seen the error, but you should use

get [find where name="ether1"]

instead of using

get 0

Sent from my SM-G955W using Tapatalk

by jonah1810
Wed Nov 18, 2020 11:19 am
Forum: Beginner Basics
Topic: Routerboard RB3011 Reset
Replies: 2
Views: 846

Re: Routerboard RB3011 Reset

Download Netinstall and use it to reset your router once you've launched it into etherboot mode.

https://wiki.mikrotik.com/wiki/Manual:Netinstall

https://wiki.mikrotik.com/wiki/Manual:Etherboot

Sent from my SM-G955W using Tapatalk

by jonah1810
Sun Nov 15, 2020 4:08 am
Forum: Scripting
Topic: Help me make this script faster
Replies: 1
Views: 381

Help me make this script faster

{ :local addr :for x from=101 to=119 step=2 do={ :for i from=0 to=254 do={ :set addr value=("10.100.$x." . $i) :if (0=[pick [/ip firewall mangle print count-only where src-address=($addr)] 0]) do={ :if [/ip firewall address-list find address=($addr) = true && list="Streamer&q...
by jonah1810
Thu Nov 05, 2020 1:19 am
Forum: RouterOS v7 BETA
Topic: v6.46.8 [long-term] is released!
Replies: 38
Views: 16121

Re: v6.46.8 [long-term] is released!

Dhcpv6 server "make static" still doesn't work properly. If client router is rebooted which causes the IAID to change dhcpv6 server creates a new dynamic entry for the same DUID but with different IAID. due to this; dual stack queuing isn't possible as new address will no longer be queued....
by jonah1810
Tue Nov 03, 2020 10:29 pm
Forum: Wireless Networking
Topic: MikroTik as Spectrum Analyzer [SOLVED]
Replies: 15
Views: 1779

Re: MikroTik as Spectrum Analyzer [SOLVED]

There are no Mikrotik AC units that support spectral analyzer.

Sent from my SM-G955W using Tapatalk

by jonah1810
Wed Oct 28, 2020 6:42 pm
Forum: Beginner Basics
Topic: Redirect subnet to interface
Replies: 2
Views: 334

Re: Redirect subnet to interface

Default route out wan 1. then use routing marks in the prerouting chain in mangle to mark the second subnet with a routing mark. you'll need two src nat rules one for all unmarked traffic and another for the marked traffic. each one to their respective interfaces. Look into the mikrotik PCC load bal...
by jonah1810
Wed Oct 14, 2020 2:13 am
Forum: Forwarding Protocols
Topic: BGP Can only access certain websites
Replies: 4
Views: 967

Re: BGP Can only access certain websites

Well it seems we can reach every site now (at least every one I've tried) the ISP's uplink router wasn't properly advertising our prefixes. I never even noticed the option on ARIN! I have just added all the options under IRR with somewhat minimal information. (didn't include import/export. but accor...
by jonah1810
Wed Sep 30, 2020 5:12 am
Forum: Forwarding Protocols
Topic: BGP Can only access certain websites
Replies: 4
Views: 967

Re: BGP Can only access certain websites

After being told a quite a few times by my ISP that everything on the upstream router looked good. I finally got somebody who told me that while they were receiving my prefix announcements he couldn't see it on "looking glass" . He said that it seems like they aren't distributing the asn/p...
by jonah1810
Tue Sep 29, 2020 10:27 pm
Forum: Forwarding Protocols
Topic: BGP Can only access certain websites
Replies: 4
Views: 967

BGP Can only access certain websites

Hello! I've recently swapped my isp connection to include a full bgp routing table. I establish the peer and receive 900,000 prefixes (ipv4 +ipv6) I advertise 2 prefixes (my Arin ipv4 and ipv6) I used the scope to ensure all the routes were active as outlined by mikrotik. However i can only ping all...
by jonah1810
Mon Aug 10, 2020 9:55 pm
Forum: Beginner Basics
Topic: Join 2 different networks
Replies: 6
Views: 1492

Re: Join 2 different networks

is it all your private network? looks like you have a triple NAT going on. If i were you i would see if i could get my global ip on the mikrotik instead of the 192. make your mikrotik have a masquerade (it already should with your current set up, and change your mikrotik network to something smaller...
by jonah1810
Sat Jul 25, 2020 8:37 am
Forum: Announcements
Topic: v6.47.1 [stable] is released!
Replies: 147
Views: 67200

Re: v6.47.1 [stable] is released!

Hey! I'm not sure if this has been pointed out before or not. but in 6.46 you updated dhcpv6 server to give a "User-Name" attribute for radius accounting. it did indeed fix that but every since that release dhcpv6 "delegated-ipv6-prefix" doesnt work for accounting only. you can s...
by jonah1810
Sat Jul 25, 2020 5:25 am
Forum: General
Topic: Mikrotik ipv6 Radius Accounting not working
Replies: 1
Views: 854

Re: Mikrotik ipv6 Radius Accounting not working

Stable release 6.46 fixes the username not being sent from dhcpv6 accounting. however now the router will not give the radius server a delegatedipv6prefix attribute. So somehow they made it even less functional. ive tried 6.47.1, 6.46 and 6.48 beta12. still dhcpv6 accounting doesn't work properly. o...
by jonah1810
Sat Jul 25, 2020 4:54 am
Forum: RouterOS v7 BETA
Topic: v7.1beta1 [development] is released!
Replies: 103
Views: 46026

Re: v7.1beta1 [development] is released!

Any word on what the wireless performance upgrade actually does?
has anybody tried any side by side testing?
by jonah1810
Fri Jul 24, 2020 9:25 pm
Forum: General
Topic: Mikrotik ipv6 Radius Accounting not working
Replies: 1
Views: 854

Mikrotik ipv6 Radius Accounting not working

Hello, ive configured a freeradius server with mysql database to accept dhcp/dhcpv6 requests from my mikrotik router. everything works as expected except for the ipv6 accounting i have a dual stack user (tp-link router) that receives ipaddress and ipv6 prefix from the radius server Example Configura...
by jonah1810
Mon Jul 13, 2020 8:43 pm
Forum: Wireless Networking
Topic: MantBox 15s Vs 19s
Replies: 1
Views: 839

Re: MantBox 15s Vs 19s

15dbi will be plenty for a 4Km link.
by jonah1810
Thu Jul 02, 2020 7:54 am
Forum: General
Topic: DHCPV6 Static Lease
Replies: 2
Views: 1041

Re: DHCPV6 Static Lease

Nobody?
by jonah1810
Thu Jul 02, 2020 7:53 am
Forum: Forwarding Protocols
Topic: DHCP Relay over OSPF?
Replies: 3
Views: 1814

Re: DHCP Relay over OSPF?

My Problem was that I had the DHCP Server on the Bridge instead of the port being used on the OSPF!
by jonah1810
Fri Jun 26, 2020 4:25 am
Forum: General
Topic: DHCPV6 Static Lease
Replies: 2
Views: 1041

DHCPV6 Static Lease

Hello trying to run a Dhcpv6 server to set up static prefixes that I can dual-stack queue. everything works just as expected except for the fact that DHCPV6 doesn't use MAC addresses. and instead uses DUID and IAID. the problem with them doing it this way is static bindings are impossible as the IAI...
by jonah1810
Fri Jun 05, 2020 12:25 am
Forum: Forwarding Protocols
Topic: DHCP Relay over OSPF?
Replies: 3
Views: 1814

DHCP Relay over OSPF?

Hey im trying to set up a dhcp relay beyond some routing (ospf) but cant seem to get it to work at all. the Dhcp Relay receives requests but no responses My Dhcp Server has: ip:10.100.123.211/19 on bridge interface: Bridge1 relay:10.100.94.1 network:10.100.94.0/24 gateway:10.100.94.1 pool: 10.100.94...
by jonah1810
Wed May 13, 2020 11:19 pm
Forum: Scripting
Topic: DHCP $lease-options?
Replies: 2
Views: 1441

DHCP $lease-options?

Hey I Currently have :local queueName "Client- $leaseActMAC"; :if ($leaseBound = "1" do={ /queue simple add name=$queueName target=($leaseActIP . "/32") limit-at=5M/18M max-limit=5M/18M comment=[/ip dhcp-server lease get [find where active-mac-address=$leaseActMAC &...
by jonah1810
Wed May 13, 2020 8:33 am
Forum: RouterOS v7 BETA
Topic: Feature Request: Combined Ipv4/ipv6 Address-list
Replies: 0
Views: 923

Feature Request: Combined Ipv4/ipv6 Address-list

I'd like to see (if at all possible) a combined address-list so you could do things such as dual stack pcq queue tree. We are looking at bringing ipv6 to our network but the lack of queuing options is putting us off. only option currently i know of is simple queues but ive heard of issues on a large...
by jonah1810
Wed Apr 01, 2020 10:11 pm
Forum: Wireless Networking
Topic: Load balancing over wireless LAN
Replies: 1
Views: 1679

Load balancing over wireless LAN

Hello, I help run a small WISP. we have one Ubiquity air fiber link leaving our office to our customers, which is all one big /19 subnet. however this link has become overloaded. we have a second identical ubiquity that we would like to install and then balance the traffic between the two. unfortuna...
by jonah1810
Thu Jan 30, 2020 2:17 am
Forum: General
Topic: Port Forwarding Broken?
Replies: 4
Views: 1006

Re: Port Forwarding Broken?

ISP Doesn't have a router with NAT. its just a modem that my router connects to. ISP has confirmed no NAT on their modem. I am an ISP trying to resolve this for a customer. I was having issues doing it the way i wanted so i figured i would go from the very beginning. i aquired an xbox from a friend ...
by jonah1810
Wed Jan 29, 2020 11:00 pm
Forum: General
Topic: Port Forwarding Broken?
Replies: 4
Views: 1006

Port Forwarding Broken?

Hey Im trying to not have Strict NAT type on my Xbox One. Plugged directly into my telus modem it is open so I know they aren't blocking me. Router is a CCR-1016 However ive tried: UPNP (opens one port in dst-nat) DMZ (/ip firewall nat add chain=dstnat action=dst-nat in-interface=[WAN INTERFACE] pro...
by jonah1810
Tue Jul 30, 2019 10:37 pm
Forum: General
Topic: QOS Simple Queue vs PCQ Tree
Replies: 0
Views: 619

QOS Simple Queue vs PCQ Tree

Hey, so we have about 700 customers who need to be queued. up until now we have been using simple queues in their respective access point. i based a new QOS Model on janis megis's "Qos Best Practices" marking the connection, then the packet then setting up a PCQ tree. but i just read that ...