Community discussions

Search found 182 matches

by Superdust
Wed May 20, 2015 9:03 am
Forum: Forwarding Protocols
Topic: Routing, VRF help
Replies: 1
Views: 792

Routing, VRF help

Can anybody tell me how to achieve this. 3 sites with Routerboards. A management network is available between them. Need two separate networks routed over this management network. The all Admin networks should reach each other, and all Open networks should reach each other, bot no communication betw...
by Superdust
Wed Mar 04, 2015 3:16 pm
Forum: The User Manager
Topic: Export / import users problems - batch change profile
Replies: 2
Views: 1410

Re: Export / import users problems - batch change profile

Hi

I have kind of the same problem.
Trying to export users from usermanager to build a CSV for SQL import.
Exporting users gives me username, password etc, but not profile...
by Superdust
Mon Feb 03, 2014 2:11 pm
Forum: Wireless Networking
Topic: SEXTANT G 5HPnD polarity
Replies: 4
Views: 1851

Re: SEXTANT G 5HPnD polarity

Ok, thanks.

But not doable in software? :(
by Superdust
Mon Feb 03, 2014 10:08 am
Forum: Wireless Networking
Topic: SEXTANT G 5HPnD polarity
Replies: 4
Views: 1851

Re: SEXTANT G 5HPnD polarity

Anyone?
by Superdust
Fri Jan 31, 2014 9:22 am
Forum: Wireless Networking
Topic: SEXTANT G 5HPnD polarity
Replies: 4
Views: 1851

SEXTANT G 5HPnD polarity

Hi I have some legacy 802.11a MT APs using R5H on RB433AHs. Have bought a bunch of SEXTANT G 5HPnD to use as CPEs on these. To get good signal I have to use Horizontal polarity. This makes the hatch position awkward on these antennas. Had this on some other 802.11N MT RBs, but then I could change po...
by Superdust
Tue Jan 07, 2014 2:42 pm
Forum: The User Manager
Topic: Usermanager, give access only to part of the web interface
Replies: 2
Views: 900

Usermanager, give access only to part of the web interface

Hi

I have a need to give some of my staff access to only add or remove users, active sessions and logs.
And not have access to the other stuff.
Any way to achieve this?
by Superdust
Tue Dec 10, 2013 2:42 pm
Forum: General
Topic: Webfig, auto login, show only some data...
Replies: 2
Views: 1276

Webfig, auto login, show only some data...

Hi I need to have some none "technical" staff have access to certain parts of webfig. Made a quick webpage as a "control panel" for several RBs, with link to webfig for each. Like this: http://username:password@10.1.60.2/webfig/#IP:DHCP_Server.Leases But still i just get the login page for webfig. A...
by Superdust
Thu Apr 25, 2013 9:36 pm
Forum: General
Topic: DHCP Option help
Replies: 1
Views: 1687

DHCP Option help

Hi Need some urgent help. Replacing a Linux DHCP server (ISCDHCP) with Mikrotik DHCP server. And having trouble configuring DHCP options for IPTV solution. How can I configure this on the Mikrotik server (from dhcpd.conf) option ntp-servers time.nist.gov; option domain-name-servers 10.50.0.5; ddns-u...
by Superdust
Wed Feb 20, 2013 11:57 am
Forum: Forwarding Protocols
Topic: Migrating to MPLS, hire help...
Replies: 4
Views: 1358

Migrating to MPLS, hire help...

Hi

I`m planning to migrate my network to MPLS/VPLS and need to hire help designing an optimal solution.
Anybody here that does this kind of work?
Tips?
by Superdust
Thu Jan 10, 2013 11:00 am
Forum: The User Manager
Topic: Critical bug / Is User Manager recommended for WISP use?
Replies: 2
Views: 1757

Re: Critical bug / Is User Manager recommended for WISP use?

Thank you for the tip.
I do not have the "Use CoA" checkbox enabled on any router.

When you had the problem, did you enable or disable it?
by Superdust
Wed Jan 02, 2013 10:52 am
Forum: The User Manager
Topic: Critical bug / Is User Manager recommended for WISP use?
Replies: 2
Views: 1757

Critical bug / Is User Manager recommended for WISP use?

Hi I have been using user manager for a few years. Upgrading versions as they become stable. One thing that has hunted our PPPoE/Radius/User Manager setup is that suddenly it stops authenticating clients. In log it says "PPPoE connection from was already active - closing previous one". An then in PP...
by Superdust
Wed Oct 10, 2012 10:17 pm
Forum: General
Topic: Help with MTU settings
Replies: 1
Views: 865

Help with MTU settings

Hi I really need some help here getting my MTU settings right. In my network I use VLANs, QinQ, EoIP tunnels, and planning to use MPLS VPLS. I see now, using for example EoIP, packets are fragmented, and 2000PPS in becomes 4000PPS. What MTU settings should I use in the network to carry these services?
by Superdust
Wed Sep 05, 2012 10:40 am
Forum: The User Manager
Topic: Sessions not ending, help
Replies: 0
Views: 770

Sessions not ending, help

Hi I have some trouble with my Usermanager / PPPoE setup. When a site goes down due to power problems or other things PPP sessions form the clients can still be seen in my RB 1100AH > PPP > Interface, even if site is down for hours! Also if one site has flapping problems, going up/down rapidly, user...
by Superdust
Mon May 14, 2012 4:44 pm
Forum: General
Topic: Help with OSPF, PPPoE and Radius
Replies: 1
Views: 932

Re: Help with OSPF, PPPoE and Radius

Anyways...

The case was that redistribute connected routes had to be enabled on PPPoE server.
Thanks syadnom for pointing this out.

I now tried this from a NSSA and a Stub, but it will not work.
Route gets to ABR, but no further.

Any ideas?
by Superdust
Tue May 08, 2012 4:35 pm
Forum: General
Topic: Help with OSPF, PPPoE and Radius
Replies: 1
Views: 932

Help with OSPF, PPPoE and Radius

Hi I`m setting up a new PPPoE solution in my network. The network is getting to big for L2, and I`m now converting to a OSPF routed network. Clients will connect using PPPoE, and I will be using Usermanager as a radius solution. To save public IPv4 addresses I use private IP address ranges for routi...
by Superdust
Sun May 06, 2012 8:38 pm
Forum: General
Topic: Help getting started with ROS and OSPF
Replies: 0
Views: 346

Help getting started with ROS and OSPF

Hi Have used Mikrotik equipment for a while. But have no experience in OSPF setup, and I`m now trying to grasp this. I have several sites, witch I want to route between with OSPF and ROS. See the drawing, each router is in a different site, but will all be in a different OSPF sone? I have no idea wh...
by Superdust
Wed May 02, 2012 12:11 pm
Forum: The User Manager
Topic: PPPoe simultaneous session limit reached for user
Replies: 4
Views: 4982

Re: PPPoe simultaneous session limit reached for user

I have also seen this many times.
Typically if there has been some storming in the segment where the router is.

What parameters between radius and PPPOE profile, and radius & PPP Authentication & Accounting do you set to avoid this?
by Superdust
Tue Feb 28, 2012 3:37 pm
Forum: General
Topic: L2 tunnel trunk
Replies: 2
Views: 1528

Re: L2 tunnel trunk

Thank you for helping out. But witch is the best choice... Remember I also need to pass a VLAN trunk. I have set up a EOIP tunnel in the lab to test it out. But I was dissapointed with the performance. I got 10Mbps one way, and 25Mbps the other way. This was strange, as the RBs was directly connecte...
by Superdust
Tue Feb 28, 2012 1:58 pm
Forum: General
Topic: L2 tunnel trunk
Replies: 2
Views: 1528

L2 tunnel trunk

Hei

I need to set up a tunnel between A <-> B
The tunnel needs to be able to trensport a VLAN trunk.
Using RB493 AH in each end.

Whay is my best option?
PPPtPv3 or EOIP??
I do not need encryption on this.
Just best performance and stability..
by Superdust
Fri Jan 13, 2012 4:34 pm
Forum: General
Topic: L2 services for clients
Replies: 2
Views: 544

L2 services for clients

Hi I have some customers requesting L2 services. I.E where they want a L2 connection between site A, B and C. In the past I have done a few of these using VLANs. But this have not worked out so great. For instance if the client has network problems, loops etc, this effects my network. How do you off...
by Superdust
Wed Jan 04, 2012 10:19 am
Forum: General
Topic: PPPoE server/Usermanager capasity?
Replies: 0
Views: 357

PPPoE server/Usermanager capasity?

Hi

Im setting up a RB 1100AH to use as Radius/Usermanager (to control rate limit and access).
Will connect several routers to this (RB1100AH) with up to 300PPPoE clients on each.
Estimating about 2000 - 3000 useres total.

Do you think this will be ok?
by Superdust
Mon Dec 26, 2011 8:35 pm
Forum: The User Manager
Topic: Remove false active sessions via script
Replies: 8
Views: 8427

Re: Remove false active sessions via script

Any update on this problem from MT?

I still have sessions that hangs, preventing clients connecting to usermanager....
by Superdust
Tue Dec 06, 2011 3:53 pm
Forum: General
Topic: Help with WISP solution PPPoE
Replies: 5
Views: 1938

Re: Help with WISP solution PPPoE

Thank you Muhammad

I was thinking it wold be best to have a PPPoE server on each site.
And then use a powerful RB (1100AH or something) in HQ as Usermanager.

Public IP pools is available from HQ.
by Superdust
Tue Dec 06, 2011 11:46 am
Forum: General
Topic: Help with WISP solution PPPoE
Replies: 5
Views: 1938

Help with WISP solution PPPoE

Hi I`m setting up a new network with Mikrotik base stations and clients. I`m planning on using Mikrotik Usermanager and PPPoE to authenticate and rate limit clients. MTsetup.png To manage the CPE Clients, I want them to receive a DHCP address. Here I want to use private IP ranges (not wasting public...
by Superdust
Tue Oct 18, 2011 11:17 am
Forum: General
Topic: Connecting clients directly to ports
Replies: 0
Views: 302

Connecting clients directly to ports

Hi I will be connecting some clients directly to ports on some RBs. But I`m really skeptical to do this, as it may create problems in my network. The clients will connect to client VLANs with /25 mask, and use public IPs through DHCP or static IP. What restrictions should I put on the interfaces/VLA...
by Superdust
Fri Aug 12, 2011 12:58 pm
Forum: General
Topic: PPPoE network design
Replies: 20
Views: 3952

Re: PPPoE network design

But, still it will go across all links, and in to where the concentrator is (core).
When using routed network, the broadcast etc will not leave the site, right?

If I can achieve this using L2 links, I will rather do that than setting up OSPF etc, as it will be a simpler setup.
by Superdust
Thu Aug 11, 2011 4:09 pm
Forum: General
Topic: PPPoE network design
Replies: 20
Views: 3952

Re: PPPoE network design

Ok, thanks, how would this OSPF setup be, do you have an example?
by Superdust
Thu Aug 11, 2011 3:47 pm
Forum: General
Topic: PPPoE network design
Replies: 20
Views: 3952

Re: PPPoE network design

Thanks, but L2 broadcasts will travel all the way to the core PPPoE concentrator? As with regular routing it will stop at the sites local router... If I use the RB1200s as PPPoE servers, authenticating users via a central Usermanager, do I still have to route public subnets to each site, or will thi...
by Superdust
Thu Aug 11, 2011 9:09 am
Forum: General
Topic: PPPoE network design
Replies: 20
Views: 3952

Re: PPPoE network design

Thanks for more input here.

Using EoIP or VPLS, would this not also just create a big L2 network, and the troubles that comes with it?
by Superdust
Wed Aug 10, 2011 10:45 pm
Forum: General
Topic: PPPoE network design
Replies: 20
Views: 3952

Re: PPPoE network design

Thank you for replys.

The reason for the RB1200s is to not have a to large L2 network, witch I have bad experience with :lol:
I did not think about the PPPoE not passing through the routers.
Guess this mean that I have to segment and route to each site then.

Any other ideas/input?
by Superdust
Wed Aug 10, 2011 4:31 pm
Forum: General
Topic: PPPoE network design
Replies: 20
Views: 3952

PPPoE network design

Hi Im setting up a new PPPoE network, based on RB1100AH as PPPoE concentrator and Usermanager, with RB1200 as routers on each site. see the attached image. Do I have to route public subnets to each site (for clients), and assign users on each site to these. Example if user1 is connected at site A, h...
by Superdust
Thu Jul 28, 2011 2:26 pm
Forum: The User Manager
Topic: Remove false active sessions via script
Replies: 8
Views: 8427

Re: Remove false active sessions via script

No comments from MT?
by Superdust
Wed Jul 20, 2011 12:16 pm
Forum: The User Manager
Topic: Remove false active sessions via script
Replies: 8
Views: 8427

Re: Remove false active sessions via script

I have had the same problems a lot of times, sent requests to MT support etc. Have not seen this script until now, and it seems to work. But this problem has been there for several years, think I had this problem in 2009! Since it has caused me a lot of headaches :( Is there not any way to fix this ...
by Superdust
Tue Apr 12, 2011 9:44 am
Forum: RouterBOARD hardware
Topic: RB411 Ethernet Freezes (No receive)
Replies: 75
Views: 25612

Re: RB411 Ethernet Freezes (No receive)

I have done some testing, and it seems to be SNMP packets making them freeze. SNMP syslogs and traps, going through management VLAN, these are sent as ethernet broadcast. Some times when a lot of devices reports errors at the same time, these SNMP broadcasts reach 5000PPS. And this seems to make a l...
by Superdust
Sat Apr 09, 2011 1:39 pm
Forum: RouterBOARD hardware
Topic: RB411 Ethernet Freezes (No receive)
Replies: 75
Views: 25612

Re: RB411 Ethernet Freezes (No receive)

Tried Latest 5.0 with latest boot.
Tried 4.17
Tried 3.30
Tried 3.28

All the same.
I have several units this keeps happening to.
Some are brand new, some about a year old or so.
I`m really lost on what to do here :(
by Superdust
Thu Apr 07, 2011 11:00 pm
Forum: RouterBOARD hardware
Topic: RB411 Ethernet Freezes (No receive)
Replies: 75
Views: 25612

Re: RB411 Ethernet Freezes (No receive)

Thank you, will try latest 5.0 and upgrade to latest boot an a couple of the problem boards to see what happens.
Thanks again!
by Superdust
Thu Apr 07, 2011 10:35 pm
Forum: RouterBOARD hardware
Topic: RB411 Ethernet Freezes (No receive)
Replies: 75
Views: 25612

Re: RB411 Ethernet Freezes (No receive)

Sorry, on a site without phone coverage, but got internet :D

Please share your solution to this problem, what did you have to do?
by Superdust
Thu Apr 07, 2011 9:29 pm
Forum: RouterBOARD hardware
Topic: RB411 Ethernet Freezes (No receive)
Replies: 75
Views: 25612

Re: RB411 Ethernet Freezes (No receive)

Thank you for the tip dallas :)

But on most of my routerboards I do not have EOIP tunnels.

Need help with safe ROS and boot versions real quick here (if this was the solution for most of you?), this is killing me :(
by Superdust
Thu Apr 07, 2011 8:04 pm
Forum: RouterBOARD hardware
Topic: RB411 Ethernet Freezes (No receive)
Replies: 75
Views: 25612

Re: RB411 Ethernet Freezes (No receive)

I also had this problem now, with several boards.
This is killing my reputation :(

What ROS version and boot is recommended to use?
by Superdust
Mon Mar 07, 2011 9:44 pm
Forum: Beginner Basics
Topic: RB750G as router with bandwith control
Replies: 5
Views: 854

Re: RB750G as router with bandwith control

Thank you, just what I was looking for.
Any way to do this with bursting?
by Superdust
Mon Mar 07, 2011 9:22 pm
Forum: Beginner Basics
Topic: RB750G as router with bandwith control
Replies: 5
Views: 854

Re: RB750G as router with bandwith control

Thank you very much for tip.

But I can not use hotspot.
Any way to do this, just limiting bandwidth on clients?
by Superdust
Thu Mar 03, 2011 2:24 pm
Forum: Beginner Basics
Topic: RB750G as router with bandwith control
Replies: 5
Views: 854

RB750G as router with bandwith control

Hi

I`m setting up a RB750G as a router for a WiFi network with 10 users.
All share a DSL connection.

So I want to limit download and upload speed for each connected client.

Want each to have download speed of 5Mbps and upload 400Kbps.
60s burst 10Mbps/1Mbps

How can I achieve this?
by Superdust
Tue Feb 22, 2011 9:23 am
Forum: The User Manager
Topic: Witch usermanager to use?
Replies: 5
Views: 1407

Re: Witch usermanager to use?

For anyone else interested, I found 4.11 to work for me.
The newer ones seems to be broken.
At least for me, I use PPPoE and Usermanager.
by Superdust
Mon Feb 07, 2011 10:43 pm
Forum: The User Manager
Topic: Need 5.0RC4, download link?
Replies: 0
Views: 545

Need 5.0RC4, download link?

Hi

I need ROS and UM 5.0RC4 for PPC.
Is there a archive of old releases, or where can I fin this?
by Superdust
Mon Feb 07, 2011 10:22 am
Forum: The User Manager
Topic: Witch usermanager to use?
Replies: 5
Views: 1407

Re: Witch usermanager to use?

UM 4.16 and 5.0RC8 both do not work for me. Was running 5.0RC8 for a few days, then suddenly it started not authenticating logins. Just says "PPPoE connection from was already active - closing previous one". An then in PPP sessions pppoe-0 appears, in stead of customer name, and it just drops. Somet...
by Superdust
Fri Jan 28, 2011 11:46 pm
Forum: The User Manager
Topic: Witch usermanager to use?
Replies: 5
Views: 1407

Re: Witch usermanager to use?

Thank you.

I installed UM 4.16, and all seems fine :)

How many users have you got on you RB1100?
by Superdust
Thu Jan 27, 2011 5:08 pm
Forum: Beginner Basics
Topic: remote logging with rsyslog
Replies: 2
Views: 9532

Re: remote logging with rsyslog

Sorry, I can not answer your question.

But I thought as you have some experience with syslog and ROS, that you might help me :)
http://forum.mikrotik.com/viewtopic.php ... 13#p245113

I get ACCOUNT, WIRELESS, SYSTEM etc instead of hostname...
Any ideas?
by Superdust
Thu Jan 27, 2011 5:02 pm
Forum: Beginner Basics
Topic: RB711 Bricked, need help!
Replies: 2
Views: 680

Re: RB711 Bricked, need help!

Thank you, it saved my day!
by Superdust
Thu Jan 27, 2011 4:21 pm
Forum: Beginner Basics
Topic: RB711 Bricked, need help!
Replies: 2
Views: 680

RB711 Bricked, need help!

Hi Need some urgent help to revive 4 RB711. Long story short. We use ROS 3.30 on most of our MT gear. And when I got my RB711s I connected them to my PoE switch and started downgrading to ROS 3.30 Don`t know what stopped me, but when I got to number 5, I tried to log on to the firs one again, and di...
by Superdust
Fri Jan 21, 2011 10:03 pm
Forum: General
Topic: Remote logging with rsyslog
Replies: 6
Views: 3306

Re: Remote logging with rsyslog

Bumping this, any help here.
Struggling with my logs :(
by Superdust
Fri Jan 21, 2011 4:07 pm
Forum: The User Manager
Topic: Witch usermanager to use?
Replies: 5
Views: 1407

Re: Witch usermanager to use?

Sorry for troubling you with this.
But I realy need some tips here.
Need high performance and stability.
Witch version do you reccomend.
by Superdust
Thu Jan 20, 2011 3:10 pm
Forum: The User Manager
Topic: Witch usermanager to use?
Replies: 5
Views: 1407

Witch usermanager to use?

Hi

I`m setting up a RB1100 to use with usermanager.
What is the best perfoming, most stable relese yet?
Need some help choosing :)
by Superdust
Mon Jan 17, 2011 8:03 pm
Forum: General
Topic: Remote logging with rsyslog
Replies: 6
Views: 3306

Re: Remote logging with rsyslog

$ModLoad ommysql $template cacti_syslog,"INSERT INTO syslog_incoming(facility, priority, date, time, host, message) values (%syslogfacility%, %syslogpriority%, '%timereported:::date-mysql%', '%timereported:::date-mysql%', '%HOSTNAME%', '%msg%')", SQL *.* >{mysql_server},{db_name},{db_users},{db_pass...
by Superdust
Mon Jan 17, 2011 10:04 am
Forum: General
Topic: Remote logging with rsyslog
Replies: 6
Views: 3306

Re: Remote logging with rsyslog

Any help on this :(
by Superdust
Fri Jan 14, 2011 2:01 pm
Forum: General
Topic: Remote logging with rsyslog
Replies: 6
Views: 3306

Remote logging with rsyslog

Hi I`m logging my network equipment with rsyslog on a Ubuntu 10.04 server. This works quite well, except a strange problem with my Mikrotik equipment. On the Mikrotik boxes I run ROS 3.30 When syslog eneries appear from these, host name is very strange. It can be: - wireless,debug - wireless,info Ho...
by Superdust
Wed Oct 06, 2010 9:07 pm
Forum: Beginner Basics
Topic: Setting up RB750G as a home router
Replies: 3
Views: 1140

Re: Setting up RB750G as a home router

Thank you for your help.
Got it going now :)
by Superdust
Wed Oct 06, 2010 10:23 am
Forum: Beginner Basics
Topic: Setting up RB750G as a home router
Replies: 3
Views: 1140

Setting up RB750G as a home router

Hi

Need some help setting a RB750G up as a simple router.

Want one port as WAN with static IP setup.
All other ports as LAN ports.
DHCP server.
NAT.
Simple firewall.

Just as a standard Linksys or Netgear, only faster :)
Any configuration examples or script files available?
by Superdust
Fri Sep 17, 2010 5:42 pm
Forum: The User Manager
Topic: Usermanager on RB 1100
Replies: 1
Views: 1249

Usermanager on RB 1100

I`m moving a UM installation over to a RB 1100.
It will also be a main router.

How many users do you recommend with this setup before moving on to something more powerful?
by Superdust
Thu Jul 01, 2010 5:15 pm
Forum: Beginner Basics
Topic: Bonding 2 radio links with RB 693AH or RB 750G
Replies: 3
Views: 930

Re: Bonding 2 radio links with RB 693AH or RB 750G

Thank you for quick reply.

I will set up extra radios, so that is ok.

I forgot to mention that I have mainly a L2 network setup with VLANs etc.
Will this OSPF setup work for this scenario?
by Superdust
Thu Jul 01, 2010 11:36 am
Forum: Beginner Basics
Topic: Bonding 2 radio links with RB 693AH or RB 750G
Replies: 3
Views: 930

Bonding 2 radio links with RB 693AH or RB 750G

Hello I have 2 radio jumps where I want redundancy and more bandwidth. The jumps are no like this: A <-> B B <-> C There is one radio link between A and B, and one link between B and C. And the capacity is used in point B and C I now plan to set up another parallel link between A and B, and a parall...
by Superdust
Mon May 31, 2010 2:57 pm
Forum: The User Manager
Topic: UM and limited time
Replies: 2
Views: 1100

UM and limited time

I want to make limitations for users, witch should only be allowed to have access for five hours after first logon (not able to split it up, and use time later after five hours passed sins first logon). And I want to make users that have 24 hours available, but they can use this time as they like (s...
by Superdust
Thu May 27, 2010 9:08 am
Forum: The User Manager
Topic: Moving UM to another RB, how?
Replies: 5
Views: 1289

Re: Moving UM to another RB, how?

Sorry for nagging about this :(

But I really need a good and reliable guide to move all my users.
by Superdust
Tue May 25, 2010 8:11 am
Forum: The User Manager
Topic: Moving UM to another RB, how?
Replies: 5
Views: 1289

Re: Moving UM to another RB, how?

Anybody?
by Superdust
Fri May 21, 2010 3:27 pm
Forum: The User Manager
Topic: Moving UM to another RB, how?
Replies: 5
Views: 1289

Moving UM to another RB, how?

I`have got myself a new RB1100 :D Witch I want to move my UM setup to. I use UM4 When I do a "export" from terminal, things like the user names and passwords are exported, but not profiles, limitations etc. How can I move everything over to my new RB1100 I do not want to manually add everything agai...
by Superdust
Thu May 06, 2010 12:36 pm
Forum: General
Topic: VLAN trunk over EoIP?
Replies: 8
Views: 5903

Re: VLAN trunk over EoIP?

MTU on interface is 1522.
But can the EoIP tunnel transport my VLAN trunk?
What must the MTU be on the EoIP tunnel to correctly transport the trunk?

Just checking here if this is possible to achieve, before I begin testing :D
by Superdust
Thu May 06, 2010 10:44 am
Forum: General
Topic: VLAN trunk over EoIP?
Replies: 8
Views: 5903

VLAN trunk over EoIP?

Hello I have a leased line witch I need to transport a VLAN trunk. The line is a single VLAN, they cannot give me Q in Q. MTU on this connection is 1522. Any way I can transport my VLAN trunk over this line? Maybe use EoIP? Is the MTU of 1522 enough to achieve this, what should I set as MTU on the E...
by Superdust
Mon Mar 15, 2010 2:11 pm
Forum: General
Topic: Simple VLAN switch setup, can`t make it work
Replies: 1
Views: 456

Simple VLAN switch setup, can`t make it work

I`m setting up a RB493AH as a switch, witch I will be using for filtering traffic (bridge filter). What I want to do is set up all ports as trunks (by adding all ports to the same bridge, the RB seems to do this). Then I want the RB to have an IP address on one VLAN for management, VLAN 100. Can`t f...
by Superdust
Wed Jan 20, 2010 12:31 pm
Forum: The User Manager
Topic: Usermanager, Hotspot, shared users
Replies: 19
Views: 32771

Re: Usermanager, Hotspot, shared users

Could it be a setting in hotspot, radius etc that makes this happen?
by Superdust
Wed Jan 20, 2010 10:34 am
Forum: The User Manager
Topic: Usermanager, Hotspot, shared users
Replies: 19
Views: 32771

Usermanager, Hotspot, shared users

Hello I have set up a Usermanager and Hotspot solution. ROS 4.4 and Usermanager test 4.4 It works great, stable and fine. But some of the hotspotusers have more than one Computer that they want to use simultaneously. I then try to set shared users in user manager to 2, but still they can only logg i...
by Superdust
Tue Jan 19, 2010 10:37 am
Forum: Wireless Networking
Topic: Using R5H for base station, TX power, CCQ
Replies: 3
Views: 799

Using R5H for base station, TX power, CCQ

Hello I have set up some RB433AH base stations with R5H radio cards. With these I use 90deg 16dB sektors from Mars. But I don't seem to get good performance. Even on some that has only 5 CPE connected. All CPE`s have free LOS and is within 2-4 Km. CPEs is 20dB MTI wireless edge enc, with RB411 On th...
by Superdust
Wed Dec 02, 2009 5:08 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 288533

Re: 802.11n

We have no luck with MT N solutions yet. But I think there is hope very soon... The other day I got new FW for my Strix Nitro II from Witelcom, and now finally it`s stable. Before it was acting just like my MT links, pore throughput, link loss etc. Now it`s rock stable, giving me 80Mbps fdx (tcp ftp...
by Superdust
Tue Nov 24, 2009 3:26 pm
Forum: The User Manager
Topic: Can`t login to usermanager, need help!
Replies: 6
Views: 1601

Re: Can`t login to usermanager, need help!

I found the problem.

When logging in I used to use http://192.168.168.1/usermanager
Now I tried http://192.168.168.1/userman and it worked again.

A bug?

I must say, I bought a bunch (400+) of routerboards and licenses, but the support is not impressive :(
by Superdust
Mon Nov 23, 2009 9:31 pm
Forum: The User Manager
Topic: Can`t login to usermanager, need help!
Replies: 6
Views: 1601

Re: Can`t login to usermanager, need help!

Please, anybody got some tips here?
Really desperate :?

It will be so much configuring do do again :(
by Superdust
Mon Nov 23, 2009 9:27 am
Forum: The User Manager
Topic: Can`t login to usermanager, need help!
Replies: 6
Views: 1601

Re: Can`t login to usermanager, need help!

Thank you.
I will use that as a last resort.

Anyone else had this happened, and solved it?
by Superdust
Mon Nov 23, 2009 4:13 am
Forum: The User Manager
Topic: Can`t login to usermanager, need help!
Replies: 6
Views: 1601

Re: Can`t login to usermanager, need help!

Please, I need some help here. I have tried everything. When I check the password in terminal I can see that it is correct. But still when trying to log on to the web interface i get "invalid username or password". I also tried adding a customer from terminal, setting password etc. But I get the sam...
by Superdust
Wed Nov 18, 2009 12:20 pm
Forum: The User Manager
Topic: Can`t login to usermanager, need help!
Replies: 6
Views: 1601

Can`t login to usermanager, need help!

Hello I was running UM 4 beta 2. Now I have upgraded to UM 4 test 2. The upgrade did`nt go well. No users were visible after update etc. So I deleted UM DB and log, and installed it from scratch. Added routers, users etc. Now suddenly I cant log in with my admin account... I checked the password in ...
by Superdust
Fri Oct 09, 2009 3:54 pm
Forum: The User Manager
Topic: Different profile for LAN <-> LAN than LAN <-> WAN
Replies: 3
Views: 1015

Re: Different profile for LAN <-> LAN than LAN <-> WAN

Thank you

How will this work?

LAN -> IP in Simple Queue -gets speed set in simple queue
IP in Simple Queue -> LAN -gets speed set in simple queue
LAN -> ALL other IP -gets speed set in profile User Manager
ALL other IP -> LAN -gets speed set in profile User Manager
by Superdust
Tue Oct 06, 2009 11:47 am
Forum: Beginner Basics
Topic: Complete reinstall, RB433AH
Replies: 1
Views: 491

Complete reinstall, RB433AH

Hello I want to do a complete reinstall of ROS on a RB433AH. How would I do this... The reason I want to do this is that I have a couple of test boxes with all kind of weird configuration on them. An the reset command from CLI does not take care of all (usermanager, HTML, logs etc). Just want everyt...
by Superdust
Tue Oct 06, 2009 11:34 am
Forum: The User Manager
Topic: Different profile for LAN <-> LAN than LAN <-> WAN
Replies: 3
Views: 1015

Different profile for LAN <-> LAN than LAN <-> WAN

Hello

I have set up a hotspot, with usermanager.

The users of the hotspot should get 10Mbps on local addresses 192.168.1.0/24 and 10.1.0.0/24.
When accessing all other (WAN) the profile set in usermanager should apply.

How would I achieve this?
Need a good explanation as I`m a novice.

Regards.
by Superdust
Wed Sep 23, 2009 12:05 pm
Forum: The User Manager
Topic: Hotspot, different profile for LAN
Replies: 1
Views: 617

Re: Hotspot, different profile for LAN

Anybody got tips here.
Need a simple guide.
by Superdust
Tue Sep 22, 2009 11:30 am
Forum: The User Manager
Topic: Hotspot, different profile for LAN
Replies: 1
Views: 617

Hotspot, different profile for LAN

Hello

I have set up a hotspot, with usermanager.

The users of the hotspot should get 10Mbps on local addresses 192.168.1.0/24 and 10.1.0.0/24.
When accessing all other the profile set in usermanager should apply.

How would I achieve this?
by Superdust
Fri Sep 18, 2009 4:42 pm
Forum: The User Manager
Topic: Usermanager, with D-link AP
Replies: 12
Views: 4306

Re: Usermanager, with D-link AP

Ok, thank you. I can`t see that there is any options for making the D-Link send password in any way. The best now I guess is to reset all configuration and try again. What type of setup shuld I use for this senario? I do not want to use MAC for autentication, users must be able to use different comp...
by Superdust
Thu Sep 17, 2009 5:12 pm
Forum: The User Manager
Topic: Usermanager, with D-link AP
Replies: 12
Views: 4306

Re: Usermanager, with D-link AP

Username is:test
Password is:demo
by Superdust
Thu Sep 17, 2009 2:54 pm
Forum: Wireless Networking
Topic: 5Ghz in Serbia?
Replies: 1
Views: 487

5Ghz in Serbia?

What 5Ghz canals can I use in Serbia?
Any with 40Mhz width?
by Superdust
Thu Sep 17, 2009 11:55 am
Forum: The User Manager
Topic: Usermanager, with D-link AP
Replies: 12
Views: 4306

Re: Usermanager, with D-link AP

I really need some help with this.
Need it running by the weekend.

Anybody got tips to this kind of setup?
by Superdust
Wed Sep 16, 2009 10:09 pm
Forum: The User Manager
Topic: Usermanager, with D-link AP
Replies: 12
Views: 4306

Re: Usermanager, with D-link AP

Sorry, I was a bit unclear. The RB does not have a WLAN interface. It is only for usermanager/radius use. The D-link AP(s) will be wired to the RB. Clients connect wireless to the D-link AP. I use these APs because they are a part of existing infrastructure. In future they will be exchanged for MT A...
by Superdust
Wed Sep 16, 2009 9:08 pm
Forum: The User Manager
Topic: Usermanager, with D-link AP
Replies: 12
Views: 4306

Re: Usermanager, with D-link AP

Thank you eneimi I tried setting the AP up with just WPA or WPA2, but the results are the same. Should it not be possible to run auto here? WPA2 if supported by client, WPA if not? I tried setting this up according to the "wireless" guide in the wiki. Witch setup should I have used? What I`m trying ...
by Superdust
Wed Sep 16, 2009 3:27 pm
Forum: The User Manager
Topic: Usermanager, with D-link AP
Replies: 12
Views: 4306

Usermanager, with D-link AP

Hello I have set up usermanager 4B4 on a routerboard. Added a test user to usermanager. A D-link wireless AP is connected to this RB. On the D-link I have set up: Authentication wpa enterpise WPA Mode Auto wpa/wpa2 Cipher Type Auto RADIUS Server 192.168.2.18 Port 1812 RADIUS Secret 1234 D-link has 1...
by Superdust
Fri Sep 11, 2009 3:18 pm
Forum: The User Manager
Topic: Usermanager/radius setup
Replies: 1
Views: 1556

Usermanager/radius setup

Hello I`m deploying 10 wireless APs with radius support. This is in a hotel. I wan to use usermanager for access control. And to set limitations on bandwidth per user. Also to access some local resources I need all clients to get 10Mbps in local network (not limited to what is set in usermanager). H...
by Superdust
Thu Sep 03, 2009 5:21 pm
Forum: General
Topic: Update keys on offline routers
Replies: 2
Views: 837

Update keys on offline routers

Hello

I have quite a few routers not connected to the internet.
Some of these I want to upgrade to ROS4.0B4.
But how do I get a new key for these?
by Superdust
Thu Sep 03, 2009 3:15 pm
Forum: The User Manager
Topic: PPPoE and User Manager problems
Replies: 5
Views: 2514

Re: PPPoE and User Manager problems

CoA and CoA Disconnect request in not enabled, should I enable these?
by Superdust
Tue Sep 01, 2009 2:37 pm
Forum: The User Manager
Topic: PPPoE and User Manager problems
Replies: 5
Views: 2514

Re: PPPoE and User Manager problems

Database is small.
I can access UM web page while the problem exists.
Seems like it must be something else.

I see this happen sometimes when clients change client equipment also.

This seems to happen for users set to Shared users 1, if set to unlimited I won`t have this problem.
by Superdust
Mon Aug 31, 2009 1:53 pm
Forum: The User Manager
Topic: PPPoE and User Manager problems
Replies: 5
Views: 2514

PPPoE and User Manager problems

Hello I have some really annoying problems with a User Manager/PPPoE setup. Running ROS 4.0 B4 When a network failure/ power failure etc disconnects clients, they can`t connect again. Message in log: 12:18:38 pppoe,ppp,info <pppoe-1>: terminating... - user tommy authentication failed - radius timeou...
by Superdust
Thu Aug 20, 2009 4:34 pm
Forum: Beginner Basics
Topic: LAN users should get unlimited speed
Replies: 11
Views: 2307

Re: LAN users should get unlimited speed

I also need this kind of setup.

It`s at a school, where access to local file shares etc should get 10Mbps, and internet access should get what is set in userman.

Please post setup guide.
by Superdust
Tue Aug 18, 2009 10:50 am
Forum: Beginner Basics
Topic: Firewall for PPPoE users
Replies: 0
Views: 302

Firewall for PPPoE users

Hello

I have set up Usermanager and PPPoE on a RB1000.
How can I make a firewall for PPPoE users (witch interface etc)?
by Superdust
Fri Jul 17, 2009 9:33 pm
Forum: Wireless Networking
Topic: Only selected VLANs in WDS sector
Replies: 3
Views: 746

Re: Only selected VLANs in WDS sector

Any ideas on this?

But how would one solve this.
In on eth I got a trunk.
WLAN1 is a sector witch should have only VLAN 15 and 16.
WLAN2 is a P2P link witch should only have VLAN 10.
WLAN3 is a P2P link witch should have the entire trunk.
by Superdust
Mon Jul 13, 2009 11:13 am
Forum: Wireless Networking
Topic: Only selected VLANs in WDS sector
Replies: 3
Views: 746

Re: Only selected VLANs in WDS sector

Takk skal du ha Vegard 8) Thank you Vegard That works. I set a filter on the wds-bridge to allow forward with packets tagged with the 2 VLAN IDs, and drop all other. But how would one solve this. In on eth I got a trunk. WLAN1 is a sector witch should have only VLAN 15 and 16. WLAN2 is a P2P link wi...
by Superdust
Fri Jul 10, 2009 10:25 am
Forum: Wireless Networking
Topic: Only selected VLANs in WDS sector
Replies: 3
Views: 746

Only selected VLANs in WDS sector

Hello

I have some APs set up as AP Bridge, and using WDS.
In on the ethernet interface I have a trunk with several VLANs.
I only want 2 of these (15 and 16) to be sent out in the WDS.
Bot I want to keep the tags, untaging vil happend at the CPE.

How would I do this?
by Superdust
Wed Jul 08, 2009 11:55 pm
Forum: The User Manager
Topic: User manager 4B3, using Profiles
Replies: 14
Views: 3867

Re: User manager 4B3, using Profiles

Yes, and that is ok.

I just seem to remember that girts sayed that it would be released last month.
So I have been checking the download link several times per day after that. :lol:
by Superdust
Wed Jul 08, 2009 4:12 pm
Forum: The User Manager
Topic: User manager 4B3, using Profiles
Replies: 14
Views: 3867

Re: User manager 4B3, using Profiles

Any news on when new beta with Profiles enabled will be available?

He he, I relay need this :lol:
by Superdust
Thu Jun 18, 2009 10:36 pm
Forum: General
Topic: Firewall tips for ISP/WISP with public addresses
Replies: 2
Views: 1058

Re: Firewall tips for ISP/WISP with public addresses

Yes, but it`s not quite that easy, as some of same traffic is useful. What one wants is as open as possible, and as safe for clients as possible... Just trying to find out what other ISPs with similar setup set in their firewalls/acl, and adapt good policy's. I guess most ISPs face similar challenge...
by Superdust
Thu Jun 18, 2009 9:19 pm
Forum: General
Topic: Firewall tips for ISP/WISP with public addresses
Replies: 2
Views: 1058

Firewall tips for ISP/WISP with public addresses

Hello All of our clients get public IPs. Blocking port 137,138,139 and 445 was done early on, protecting clients with windows and no firewall. We are seeing a lot of attacks on our networks from external botnets etc. Lately we had a lot of ICMP ttl expired attacks, so we had to rate limit these pack...
by Superdust
Thu Jun 18, 2009 1:31 pm
Forum: The User Manager
Topic: Usermanager 4.0Beta3, IP pools
Replies: 11
Views: 3424

Re: Usermanager 4.0Beta3, IP pools

Thank you. So if I in pool1 define pool2 as next and in pool2 define pool3 as next and so on, I only have to define pool1 in all users added in Usermanager? If I would like to give some users static IPs, would I then make a separate pool for these, and just type in a IP from this pool in Usermanager...
by Superdust
Wed Jun 17, 2009 1:23 pm
Forum: The User Manager
Topic: New User Manager BuGs Report - Sticky Please?
Replies: 52
Views: 12388

Re: New User Manager BuGs Report - Sticky Please?

I also have the active sessions refresh problem.
Very slow update.

I try to refresh page, logout/in without result.

Would be nice to have update every 10s or so.
by Superdust
Wed Jun 17, 2009 11:29 am
Forum: The User Manager
Topic: Usermanager 4.0Beta3, IP pools
Replies: 11
Views: 3424

Re: Usermanager 4.0Beta3, IP pools

Hmm I`m not sure I understand. I have created a pool, "pool1". Here I specify addresses from 192.168.2.2-192.168.2.125 (just an example, I use official IPs). When adding user in Usermanager, I add the text "pool1" in the pool name field, and let IP address stand black. Logging on with PPPoE user the...
by Superdust
Wed Jun 17, 2009 11:05 am
Forum: Wireless Networking
Topic: Bridge out to client
Replies: 2
Views: 610

Re: Bridge out to client

Thank you cylent Is not spanning tree used between switches for redundancy? Must the client switch also have spanning tree then? The case is that the client makes a storm in his network (witch I have no control over), and this spreads over my bridge, and makes a lot of trouble in my network also. Th...
by Superdust
Tue Jun 16, 2009 9:03 pm
Forum: The User Manager
Topic: Usermanager 4.0Beta3, IP pools
Replies: 11
Views: 3424

Usermanager 4.0Beta3, IP pools

Hello

When adding new user in Usermanager I have to spesify IP pool.
Is it possible to have several pools, and make usermanger choose available IPs from all selected pools?

If I would like to add static IP for users do these have to be in a pool, or how would I do this?
by Superdust
Tue Jun 16, 2009 1:26 pm
Forum: Wireless Networking
Topic: Bridge out to client
Replies: 2
Views: 610

Bridge out to client

Hello

I have some clients witch is connected to my network directly via RIC/522Ts, set up in WDS mode.

The other day one of these managed to make a loop in his network, and this spread to my network.
Is there any way to protect my network against this, still using the bridged setup?
by Superdust
Sat Jun 13, 2009 8:40 pm
Forum: Wireless Networking
Topic: RB433AH + XR5 AP Problems
Replies: 20
Views: 5848

RB433AH + XR5 AP Problems

Hello I have set up an base station with a sector connected to a XR5 mini pci card on a RB433AH board. Clients connected to this base use RB411A and R52/R52H. All use ROS 3.24 Problem is that clients disconnect all the time, one and one, not all at the same time. Also with different inter walls, 3-3...
by Superdust
Wed Jun 10, 2009 3:33 pm
Forum: Scripting
Topic: Manual input togeter with script
Replies: 2
Views: 633

Re: Manual input togeter with script

Maybe I did`t express my self right. What I want is when running my script, it will set a bunch of settings I use for all my CPEs. But some of the settings will be different on each unit, for example IP address on a interface. Any way to make the script ask for this in terminal, so that I can apply ...
by Superdust
Wed Jun 10, 2009 3:27 pm
Forum: The User Manager
Topic: User manager 4B3, using Profiles
Replies: 14
Views: 3867

Re: User manager 4B3, using Profiles

Sorry, do not mean to nag about this.

When do you think the usermanager with profiles support will be released?
by Superdust
Mon Jun 08, 2009 7:20 pm
Forum: Scripting
Topic: Manual input togeter with script
Replies: 2
Views: 633

Manual input togeter with script

Hello

I have made som basic scripts with help from export function in ROS.
Is there a possibility to add manual inputs to scripts.
For example when script comes to setting IP eddress on interface, terminal promts for ip address?

Any easy way to do this?
by Superdust
Wed Jun 03, 2009 11:22 pm
Forum: The User Manager
Topic: Usermanager B4.3, User hangs
Replies: 1
Views: 843

Usermanager B4.3, User hangs

Hello Testing usermanager B4.3, and cant wait for final release, seems great. I have a small problem now though. Some users witch I have set to shared users 1 can`t log in any more. Checking active sessions, this user have now sessions active. But if I set shared users to 2, he can log in again. Any...
by Superdust
Wed Jun 03, 2009 12:34 pm
Forum: Wireless Networking
Topic: Web based SNR readout?
Replies: 0
Views: 395

Web based SNR readout?

Hi

Is there a web based SNR/signal readout built in ROS?
I thought it would be a good idea to make it easy for the customers installing their outdoor CPE, and getting up a signal bar on their PCs.
by Superdust
Wed Jun 03, 2009 12:30 pm
Forum: Beginner Basics
Topic: Help with firewall rules
Replies: 5
Views: 926

Re: Help with firewall rules

That works, thank you!
by Superdust
Wed Jun 03, 2009 11:47 am
Forum: Beginner Basics
Topic: Help with firewall rules
Replies: 5
Views: 926

Re: Help with firewall rules

Thank you. I have now made some simple rules, and it seems to work well. But I need some help with this scenario. I have clients with RB411 based equipment. The only thing that should pass through is PPPoE to the Usermanager box. The clients is set up as wds bridge. PPPoE clients will connect to eth...
by Superdust
Thu May 28, 2009 2:35 pm
Forum: The User Manager
Topic: User manager 4B3, using Profiles
Replies: 14
Views: 3867

Re: User manager 4B3, using Profiles

Thank you sergejs.
This feature sounds great.

Will there be a select list when adding user for assigning profile?
When do you think this feature will be ready?
by Superdust
Thu May 28, 2009 12:51 pm
Forum: The User Manager
Topic: User manager 4B3, using Profiles
Replies: 14
Views: 3867

User manager 4B3, using Profiles

Hello I`m trying to set up a small WISP system based on PPPoE/Usermanger on a RB1000. For clients I will use different rate limits. 1Mbps down, 300Kbps up 3Mbps down, 700Kbps up 6Mbps down, 1Mbps up When adding new users it would be nice to be able to link customer to a profile that has these rate l...
by Superdust
Thu May 28, 2009 11:44 am
Forum: The User Manager
Topic: User Manager and PPPoE problems
Replies: 2
Views: 813

Re: User Manager and PPPoE problems

Ahh, the error was there, thank you
by Superdust
Thu May 28, 2009 11:43 am
Forum: Beginner Basics
Topic: Help with firewall rules
Replies: 5
Views: 926

Help with firewall rules

Hello I need some help securing my network. I got a router box, RB1000 witch has a public IP and a private IP. It is used as PPPoE, Usermanager and router. I would like to only be able to reach management (ssh, telnet, winbox, usermanager-web etc) from one subnet 10.1.0.0/24. Also PPPoE should only ...
by Superdust
Fri May 22, 2009 4:11 pm
Forum: The User Manager
Topic: User Manager and PPPoE problems
Replies: 2
Views: 813

User Manager and PPPoE problems

Hello I have set up a board with ROS 3.23 PPPoE server and User Manager. Everything seems to work fine, I can log on, add users etc. But when connecting with PPPoE client, it disconnect immediately. Login and everything is a success... Under the User Manager web interface /Logs it says authorization...
by Superdust
Sat Mar 28, 2009 4:01 pm
Forum: Wireless Networking
Topic: Superchannel license
Replies: 3
Views: 705

Superchannel license

Hello

This might be a dumb question, but here it goes...

How, where can I get superchannel license for my MT equipment?
by Superdust
Sat Jan 31, 2009 11:07 pm
Forum: General
Topic: Rate limit on L2 links possible?
Replies: 6
Views: 1939

Rate limit on L2 links possible?

Hello

Is there å good way to rate limit layer 2 bridges (WDS)?
I tried the simple Queues, but it does not seem to have any affect.
I want both rx and tx rate limit.

Hope somebody has tips
by Superdust
Mon Jan 26, 2009 1:43 pm
Forum: Wireless Networking
Topic: User manager, L2 VLAN
Replies: 1
Views: 690

User manager, L2 VLAN

Hello, I need some help with a petty simple setup. I have a L2 network witch I want to use with Mikrotik base stations and clients. The network is based on VLANs. I use one VLAN for management and others for client internet access. Is there a possibility to use Usermanager on this setup? I want to u...
by Superdust
Fri Jul 04, 2008 3:37 pm
Forum: Wireless Networking
Topic: Manual TX power, XR5, RIC/522T
Replies: 3
Views: 1259

Re: Manual TX power, XR5, RIC/522T

Yes, but in these cases signal was to high, what then?
And with the xr5?
by Superdust
Fri Jul 04, 2008 1:24 pm
Forum: Wireless Networking
Topic: Manual TX power, XR5, RIC/522T
Replies: 3
Views: 1259

Manual TX power, XR5, RIC/522T

Hello I have some TX power questions. I have a lot of the old RICs with the RB532 board. When I have close links, I set TX Power to manual, and experiment with the 3 highest speeds down in 1db steps. So I get SNR down to about 50db and signal strength around 45dbm. But now I have set up a p2p link w...
by Superdust
Fri May 02, 2008 12:48 am
Forum: Beginner Basics
Topic: PPPoE over VLAN, problems
Replies: 1
Views: 1026

PPPoE over VLAN, problems

Hello

I use some Cisco an HP switches in my network.
On these there are many VLANs defined.
I have problems getting PPPoE working over VLAN it seems (mikrotik clients).
Everything else works just fine, but PPPoE seems to brake.
Anybody know if VLAN and PPPoE is incompatible?
by Superdust
Tue Apr 29, 2008 12:50 pm
Forum: Wireless Networking
Topic: Close p2p links, TX - Power settings
Replies: 16
Views: 2502

Close p2p links, TX - Power settings

Hello I use a lot of RICs with RB 532 and RB 333 with the standard 65mw card for short p2p links etc. Some of the shortest links have more power than they need (snr 60-70). What is the best way to adjust this? Is there a way to make this autoadjust, so that it uses more power in snow/rain etc, and l...
by Superdust
Fri Mar 28, 2008 9:23 pm
Forum: Beginner Basics
Topic: Enable SNMP RIC522T, Cacti
Replies: 3
Views: 1489

Re: Enable SNMP RIC522T, Cacti

Ok, thank you.

What is default on MikroTik.
public no password, and private no password?
by Superdust
Fri Mar 28, 2008 12:24 pm
Forum: Beginner Basics
Topic: Enable SNMP RIC522T, Cacti
Replies: 3
Views: 1489

Enable SNMP RIC522T, Cacti

Hello I bought some RIC522T I use for WDS PTP bridges. This may be a stupid question, but how do I monitor these in Cacti. I wan`t to graph SNR, CCQ etc. I do not have the skills to make my own templates. When I added one of the radios as generic SNMP device I got a SNMP error. Is there any easy how...
by Superdust
Tue Nov 20, 2007 12:47 pm
Forum: Wireless Networking
Topic: Tips on radio planning tool
Replies: 1
Views: 686

Tips on radio planning tool

Hello

I need some tips on witch radio planning tool to get.
My network is becoming a bit to big to plan just on paper.
I need a tool to plan frequencys, jumps and sektors. And to keep the big picture on the network.

What do you use?
by Superdust
Mon Nov 19, 2007 10:55 pm
Forum: Wireless Networking
Topic: 5500 - 5700Mhz
Replies: 6
Views: 1760

Re: 5500 - 5700Mhz

Thank you brasileottanta.
I`ll try it.
by Superdust
Tue Nov 13, 2007 9:41 pm
Forum: Wireless Networking
Topic: LACP over MT wireless brige
Replies: 1
Views: 751

Re: LACP over MT wireless brige

Another thing, is it possible to get 2 router boards on each side of a jump to work together, giving redundancy and more bandwith/prosessing power?
by Superdust
Tue Nov 13, 2007 3:34 pm
Forum: Wireless Networking
Topic: LACP over MT wireless brige
Replies: 1
Views: 751

LACP over MT wireless brige

Hello

If you have LACP capable switches in each end, and set up 2 MT jumps, will it work?
I mean with one par RIC522 I get 45Mbps TCP throughput, using two pairs I could get 90Mbps with LACP?
by Superdust
Tue Nov 13, 2007 11:08 am
Forum: Wireless Networking
Topic: 5500 - 5700Mhz
Replies: 6
Views: 1760

Re: 5500 - 5700Mhz

These frequencies are open in Norway, and we use it on Alvarion etc.
But they don`t appear in MT even with country set to Norway.

Is there any other Countrys I can choose to make them appear?
by Superdust
Tue Nov 13, 2007 10:11 am
Forum: Wireless Networking
Topic: 5500 - 5700Mhz
Replies: 6
Views: 1760

5500 - 5700Mhz

Hello

On some of my equipment i run channals from 5500 - 5700Mhz, but I don`t get these up in the MT configuration.
Why?
by Superdust
Sat Sep 29, 2007 7:16 pm
Forum: Wireless Networking
Topic: RB532, Wireless bandwith 5Ghz
Replies: 1
Views: 504

RB532, Wireless bandwith 5Ghz

Some stupid questions about RIC/522

Is it only 20Mhz bandwith in 5Ghz band?

I got the 5Ghz 5Mhz, 5Ghz 10Mhz and the setting that is called just 5Ghz, i guess this is 20Mhz bandwith?
Is there no 40Mhz wide 5Ghz cannel?
by Superdust
Mon Sep 17, 2007 10:07 am
Forum: Wireless Networking
Topic: Radius server, PPPoE etc
Replies: 8
Views: 1469

Re: Radius server, PPPoE etc

Thank you for many good tips :D

The choises are now:

-Apache
-Radius
-My sql
-PHP my admin
-Dialup admin

or

-Apache
-User Manager

But witch is the most stable solution?
Anybody been running both solutions?

Seems like User Manager might be the most smooth solution, as it`s all in one....
by Superdust
Thu Sep 13, 2007 9:14 am
Forum: Wireless Networking
Topic: Radius server, PPPoE etc
Replies: 8
Views: 1469

Re: Radius server, PPPoE etc

Thank you krigevr :D

So what I need is....
-a box with a Linux distro.
-install free RADIUS
-Install MySQL
-Connect free RADIUS and MySQL

What web interface do you use?
by Superdust
Tue Sep 11, 2007 2:01 pm
Forum: Wireless Networking
Topic: Radius server, PPPoE etc
Replies: 8
Views: 1469

Radius server, PPPoE etc

Hello. I need some help with finding a radius solution. What I want is a server to control access to a large wireless network. Am locking for these features: -Individual bandwith setting (groups and clients) -Captive portal -Web interface (adding ,remowing, blocking etc clients) Any tips for softwar...
by Superdust
Fri Aug 17, 2007 4:02 pm
Forum: Wireless Networking
Topic: Frequency selection on nearby sites
Replies: 1
Views: 662

Frequency selection on nearby sites

Hello

I have som sites witch is near each other, an I`m planing on using MT P2P links.
If I use 5180Mhz on one site and 5200Mhz on the other, 20Mhz resoluton, will they interfear with each other?
by Superdust
Sat Aug 04, 2007 1:41 am
Forum: Wireless Networking
Topic: Client profiles, how do you do it?
Replies: 3
Views: 625

Re: Client profiles, how do you do it?

Bumping this.

Anybody? :(
by Superdust
Fri Jul 20, 2007 11:16 pm
Forum: General
Topic: Mikrotik VIDEOS!
Replies: 35
Views: 6213

Re: Mikrotik VIDEOS!

This is really great!
Hope some good tutorial vids also will arrive....
by Superdust
Fri Jul 20, 2007 10:35 pm
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

Maybye the new boards will be some improvements to 8)
It`s not always so good using x86 systems on all locations.....
by Superdust
Thu Jul 19, 2007 11:11 pm
Forum: Wireless Networking
Topic: Client profiles, how do you do it?
Replies: 3
Views: 625

Client profiles, how do you do it?

Hello A MT noob question. I`m setting up som MT base stations, and would like to set up some different client profiles. About 15 clients will connect to each sektor. If I want some clients to have 1500/500Kbps and some to have 3000/700Kbps, how do you reccomend setting it up? By the way, on the MT s...
by Superdust
Thu Jul 19, 2007 11:04 pm
Forum: Wireless Networking
Topic: What is a better transparent bridge to 50Km?
Replies: 2
Views: 657

Re: What is a better transparent bridge to 50Km?

So you get better throughput with eoip that wds on p2p lik?
I use the guide in the wiki http://wiki.mikrotik.com/wiki/Transpare ... o_Networks
And get about 16-18 Mbps (real tcp throughput) 20Mhz channels in 5G, could I get more using eoip?
by Superdust
Thu Jul 19, 2007 9:22 pm
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

Thank you for the info on this

This means I`ll still be using Alvarion B100 in backbone, or MT with X86?
by Superdust
Mon Jul 09, 2007 9:29 am
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 2190

Re: Vlan untagged on ethernet port, CPE

How do one attach ETH1 to bridge Untagged?
I can`t find any options for this in winbox....
by Superdust
Sat Jul 07, 2007 12:17 am
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 2190

Re: Vlan untagged on ethernet port, CPE

Thanks again Diganet for replying.

I`m not asking for the whole setup.

It`s the VLAN setup via winbox I don`t get and would like some instructions for.
There fore I made the drawing, so that you could see what cind of VLAN setup I was attempting.
by Superdust
Thu Jul 05, 2007 3:15 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 2190

Re: Vlan untagged on ethernet port, CPE

Can anybody help with this setup, I need some winbox instructions :shock: He he

Or is it not possible?

I use this kind of setup with my Alvarion equipment.
by Superdust
Wed Jul 04, 2007 10:05 am
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 2190

Re: Vlan untagged on ethernet port, CPE

OK, I made a drawing of the setup. As you can see the clients computers is connected to the ethernet port on the CPE or they have their private router connected. The ethernet port on the CPE needs to have static access to the VLAN the service that the client subscribes to is on, because the coutomer...
by Superdust
Tue Jul 03, 2007 1:40 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 2190

Re: Vlan untagged on ethernet port, CPE

Sorry you guys, can`t get this to work :( I use AP in AP bridge mode, WDS mode Dynamic The clients is set up as station WDS, WDS mode disabled. Is this a ok way to set it up? This setup carries all vlans across the network, and if I use vlan capable equipment at the clients I can choose witch vlan I...
by Superdust
Mon Jul 02, 2007 10:28 am
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

Ok, this is R52 limitations, or all compatible radio cards?
by Superdust
Sun Jul 01, 2007 5:59 pm
Forum: Wireless Networking
Topic: Aligning tips - share -
Replies: 19
Views: 3311

Re: Aligning tips - share -

If you get the newest maggelan GPS maps, and use mapsend lite you can get profiles like that automaticaly. 8)
by Superdust
Sun Jul 01, 2007 1:12 pm
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

For Mikrotik products 100 simultaneous calls on a routerboard it would be a good limit. Regards. Is this wired or wireless, witch routerboard? Does this mean that you would get 22000-23000PPS? I`m asking this because I was planing to use MT for backbone also, but if it can only handle 8000PPS wirel...
by Superdust
Sat Jun 30, 2007 11:31 pm
Forum: Wireless Networking
Topic: about 50Km link p2p
Replies: 21
Views: 3015

Re: about 50Km link p2p

There are some very good link calculators that take into account your geographical location and give you uptime calculations for the whole year, and also give "worst month" uptime which can be substantially different.
Any calkulators like this that is available online?
by Superdust
Sat Jun 30, 2007 4:06 pm
Forum: Beginner Basics
Topic: End user bandwith graphing+ total bytes dl or up in hotspot
Replies: 6
Views: 2389

Re: End user bandwith graphing+ total bytes dl or up in hotspot

First of all you need to get Cacti up and running on a PC or server. I haven`t actually began graphing MT equipment yet (as I just began testing it), but I have Alvarion, HP, and Cisco witch I`m graphing. The easyest way is to find Cacti templets for yor equipment, and add these to Cacti. Then follo...
by Superdust
Sat Jun 30, 2007 1:43 am
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

Ok, so using RB532 as P2P WDS transparent bridge, you can only push 8000pps?
Any better board for P2P use?
by Superdust
Fri Jun 29, 2007 11:38 pm
Forum: Beginner Basics
Topic: End user bandwith graphing+ total bytes dl or up in hotspot
Replies: 6
Views: 2389

Re: End user bandwith graphing+ total bytes dl or up in hotspot

Yes, you can.
But it will be mutch work :shock:

Depends on how many users you have thogh if you have like 15 you will set it up in a day :)
by Superdust
Fri Jun 29, 2007 10:04 pm
Forum: Beginner Basics
Topic: End user bandwith graphing+ total bytes dl or up in hotspot
Replies: 6
Views: 2389

Re: End user bandwith graphing+ total bytes dl or up in hotspot

You can use cacti for this http://www.cacti.net
It will be mutch work thogh 8)
by Superdust
Fri Jun 29, 2007 5:12 pm
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

He is saying mutch more, witch is right?
http://forum.mikrotik.com/viewtopic.php ... &hilit=pps
by Superdust
Fri Jun 29, 2007 5:00 pm
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

Ok, wakeupcall :shock:

Is there any other routerboard with more performance?
Or you have to go with pc hardware?
by Superdust
Fri Jun 29, 2007 4:45 pm
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

Does this mean that using RB532 as backbone link also has the same limitations?
by Superdust
Fri Jun 29, 2007 4:23 pm
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

Thank you for clearing that up Nick.

I didn`t concider that :shock:
by Superdust
Thu Jun 28, 2007 10:59 pm
Forum: General
Topic: Mikrotik VIDEOS!
Replies: 35
Views: 6213

Re: Let's try something new ...

Great idea!

Very interesting videos, and hopfully more to come.
by Superdust
Thu Jun 28, 2007 5:29 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 2190

Re: Vlan untagged on ethernet port, CPE

But let`s say that the uplink to the AP carries 10 VLANs (no one is untagged), for different services, companies etc. Then I hock up a client to this AP, the service that the client is supposed to have is on VLAN 13. To the RIC/522s ethernet port he want`s to connect his PC to use the service, then ...
by Superdust
Thu Jun 28, 2007 3:15 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 2190

Re: Vlan untagged on ethernet port, CPE

Thank you for answering. But I am afraid I`m going to need more help. I can`t seem to get VLANs untagged at the ethernet port. I created a bridge and added the VLAN with correct ID under it, but how do I untagg it for the ethernet port? The links carry a trunk, and the clients equipment don`t suppor...
by Superdust
Thu Jun 28, 2007 12:29 am
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 3234

Re: VOIP limits

Each voice call with good quality would take about 64Kbps full duplex, so about 125 calls I would guess.
by Superdust
Wed Jun 27, 2007 11:39 pm
Forum: Wireless Networking
Topic: Any experience using RIC/522C CPE`s in wintertime
Replies: 0
Views: 459

Any experience using RIC/522C CPE`s in wintertime

Anybody got experience in using RIC/522C CPE`s in wintertime, -30 celsius, and shifting weather that might cause condense + strong winds?
I ask because the units seem a bit flimsy :lol:
by Superdust
Wed Jun 27, 2007 10:03 pm
Forum: Wireless Networking
Topic: misteriously happends randomply... SOLVED!
Replies: 5
Views: 972

Re: misteriously happends randomply... SOLVED!

What was the actual problem?
by Superdust
Wed Jun 27, 2007 9:41 am
Forum: Wireless Networking
Topic: proper config for ospf eoip setup
Replies: 2
Views: 869

Re: proper config for ospf eoip setup

This setup sounds interesting.
Do the link transfer all layer 2 information?
How mutch throughput you got in real life tcp?
by Superdust
Wed Jun 27, 2007 9:34 am
Forum: Wireless Networking
Topic: Graphing MT AP clients in Cacti
Replies: 6
Views: 1656

Re: Graphing MT AP clients in Cacti

Sounds great pinam. Would be nice to graph snr and traffic to se where problems come from. How do you do it when you add new clients to your AP, or even new AP with lets say 13 clients, you have to add each client manualy or can you "search" the ap for interfaces like for example a switch and choose...
by Superdust
Fri Jun 22, 2007 11:46 am
Forum: Wireless Networking
Topic: PTP antenna performance
Replies: 2
Views: 708

Re: PTP antenna performance

I dont know about this one, but with a small radome with 25DB gain I get 20Km with no problem.
by Superdust
Thu Jun 21, 2007 5:13 pm
Forum: Wireless Networking
Topic: Graphing MT AP clients in Cacti
Replies: 6
Views: 1656

Graphing MT AP clients in Cacti

Hello, enybody here use Cacti for monitoring?

I want to use Cacti for graphing each client connected to the MT AP, is this possible?
How to do it?
by Superdust
Wed Jun 20, 2007 3:12 pm
Forum: Wireless Networking
Topic: 5.740-5.840GHz Frequencies missing for United Kingdom
Replies: 27
Views: 2812

Re: 5.740-5.840GHz Frequencies missing for United Kingdom

I use som alvarion equipment, here you have to know yourself what band you can use.
How about adding an option in MT for expert user etc where all is open.
by Superdust
Tue Jun 19, 2007 12:39 pm
Forum: Wireless Networking
Topic: gprs
Replies: 18
Views: 3664

Re: wimax

I realy hope MT could come up with a wimax solution.
Wimax equipment today is really to expensive.

Wimax is great though, good nlos capabilitys and great range.
by Superdust
Mon Jun 18, 2007 11:04 pm
Forum: Wireless Networking
Topic: WISP service profiles
Replies: 2
Views: 784

WISP service profiles

Hello With ouer wimax equipment we use a sentral control software where we can see the coustomers signal up/down, error frames etc. We also control service profiles etc "basic" 2000/500Kbps "fast" 3000/1000Kbps "super" 4000/1500Kbps etc. Coustomers witch don`t pay, we just disable the profile. Just ...
by Superdust
Sat Jun 16, 2007 12:35 am
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 2190

Vlan untagged on ethernet port, CPE

Hello I`m new to mikrotik. And I now have a test setup going with some RIC/522 clients and a MT base station. I can`t seem to find out how to untagg a vlan on the ethernet port on the CPE (so that the coustomer don`t get a truk, only the vlan he is supposed to be in). And how to put the bridge IP on...
by Superdust
Mon Jun 11, 2007 4:11 pm
Forum: Wireless Networking
Topic: Setting up a WISP service based on RIC/522 clients and RB/AP
Replies: 1
Views: 572

Setting up a WISP service based on RIC/522 clients and RB/AP

Hello. I`m all new to Mikrotik. But we have set up some wimax base stations, and used different backhaul links (5GHz, 18GHz etc). This equipment has been working very well for us, but the price is quite high. So when trying to reach just a few houses in the country side we decided to give Mikrotik a...