MikroTik

Superdust

Can anybody tell me how to achieve this. 3 sites with Routerboards. A management network is available between them. Need two separate networks routed over this management network. The all Admin networks should reach each other, and all Open networks should reach each other, bot no communication betw...

Superdust

Hi

I have kind of the same problem.
Trying to export users from usermanager to build a CSV for SQL import.
Exporting users gives me username, password etc, but not profile...

Superdust

Ok, thanks.

But not doable in software?

Superdust

Anyone?

Superdust

Hi I have some legacy 802.11a MT APs using R5H on RB433AHs. Have bought a bunch of SEXTANT G 5HPnD to use as CPEs on these. To get good signal I have to use Horizontal polarity. This makes the hatch position awkward on these antennas. Had this on some other 802.11N MT RBs, but then I could change po...

Superdust

Anyone, not possible?

Superdust

Hi

I have a need to give some of my staff access to only add or remove users, active sessions and logs.
And not have access to the other stuff.
Any way to achieve this?

Superdust

Hi I need to have some none "technical" staff have access to certain parts of webfig. Made a quick webpage as a "control panel" for several RBs, with link to webfig for each. Like this: http://username:password@10.1.60.2/webfig/#IP:DHCP_Server.Leases But still i just get the logi...

Superdust

Hi Need some urgent help. Replacing a Linux DHCP server (ISCDHCP) with Mikrotik DHCP server. And having trouble configuring DHCP options for IPTV solution. How can I configure this on the Mikrotik server (from dhcpd.conf) option ntp-servers time.nist.gov; option domain-name-servers 10.50.0.5; ddns-u...

Superdust

Hi

I`m planning to migrate my network to MPLS/VPLS and need to hire help designing an optimal solution.
Anybody here that does this kind of work?
Tips?

Superdust

Thank you for the tip.
I do not have the "Use CoA" checkbox enabled on any router.

When you had the problem, did you enable or disable it?

Superdust

Hi I have been using user manager for a few years. Upgrading versions as they become stable. One thing that has hunted our PPPoE/Radius/User Manager setup is that suddenly it stops authenticating clients. In log it says "PPPoE connection from was already active - closing previous one". An ...

Superdust

Hi I really need some help here getting my MTU settings right. In my network I use VLANs, QinQ, EoIP tunnels, and planning to use MPLS VPLS. I see now, using for example EoIP, packets are fragmented, and 2000PPS in becomes 4000PPS. What MTU settings should I use in the network to carry these services?

Superdust

Hi I have some trouble with my Usermanager / PPPoE setup. When a site goes down due to power problems or other things PPP sessions form the clients can still be seen in my RB 1100AH > PPP > Interface, even if site is down for hours! Also if one site has flapping problems, going up/down rapidly, user...

Superdust

Anyways...

The case was that redistribute connected routes had to be enabled on PPPoE server.
Thanks syadnom for pointing this out.

I now tried this from a NSSA and a Stub, but it will not work.
Route gets to ABR, but no further.

Any ideas?

Superdust

Hi I`m setting up a new PPPoE solution in my network. The network is getting to big for L2, and I`m now converting to a OSPF routed network. Clients will connect using PPPoE, and I will be using Usermanager as a radius solution. To save public IPv4 addresses I use private IP address ranges for routi...

Superdust

Hi Have used Mikrotik equipment for a while. But have no experience in OSPF setup, and I`m now trying to grasp this. I have several sites, witch I want to route between with OSPF and ROS. See the drawing, each router is in a different site, but will all be in a different OSPF sone? I have no idea wh...

Superdust

I have also seen this many times.
Typically if there has been some storming in the segment where the router is.

What parameters between radius and PPPOE profile, and radius & PPP Authentication & Accounting do you set to avoid this?

Superdust

Thank you for helping out. But witch is the best choice... Remember I also need to pass a VLAN trunk. I have set up a EOIP tunnel in the lab to test it out. But I was dissapointed with the performance. I got 10Mbps one way, and 25Mbps the other way. This was strange, as the RBs was directly connecte...

Superdust

Hei

I need to set up a tunnel between A <-> B
The tunnel needs to be able to trensport a VLAN trunk.
Using RB493 AH in each end.

Whay is my best option?
PPPtPv3 or EOIP??
I do not need encryption on this.
Just best performance and stability..

Superdust

Hi I have some customers requesting L2 services. I.E where they want a L2 connection between site A, B and C. In the past I have done a few of these using VLANs. But this have not worked out so great. For instance if the client has network problems, loops etc, this effects my network. How do you off...

Superdust

Hi

Im setting up a RB 1100AH to use as Radius/Usermanager (to control rate limit and access).
Will connect several routers to this (RB1100AH) with up to 300PPPoE clients on each.
Estimating about 2000 - 3000 useres total.

Do you think this will be ok?

Superdust

Any update on this problem from MT?

I still have sessions that hangs, preventing clients connecting to usermanager....

Superdust

Thank you Muhammad

I was thinking it wold be best to have a PPPoE server on each site.
And then use a powerful RB (1100AH or something) in HQ as Usermanager.

Public IP pools is available from HQ.

Superdust

Hi I`m setting up a new network with Mikrotik base stations and clients. I`m planning on using Mikrotik Usermanager and PPPoE to authenticate and rate limit clients. MTsetup.png To manage the CPE Clients, I want them to receive a DHCP address. Here I want to use private IP ranges (not wasting public...

Superdust

Hi I will be connecting some clients directly to ports on some RBs. But I`m really skeptical to do this, as it may create problems in my network. The clients will connect to client VLANs with /25 mask, and use public IPs through DHCP or static IP. What restrictions should I put on the interfaces/VLA...

Superdust

But, still it will go across all links, and in to where the concentrator is (core).
When using routed network, the broadcast etc will not leave the site, right?

If I can achieve this using L2 links, I will rather do that than setting up OSPF etc, as it will be a simpler setup.

Superdust

Ok, thanks, how would this OSPF setup be, do you have an example?

Superdust

Thanks, but L2 broadcasts will travel all the way to the core PPPoE concentrator? As with regular routing it will stop at the sites local router... If I use the RB1200s as PPPoE servers, authenticating users via a central Usermanager, do I still have to route public subnets to each site, or will thi...

Superdust

Thanks for more input here.

Using EoIP or VPLS, would this not also just create a big L2 network, and the troubles that comes with it?

Superdust

Thank you for replys.

The reason for the RB1200s is to not have a to large L2 network, witch I have bad experience with

I did not think about the PPPoE not passing through the routers.
Guess this mean that I have to segment and route to each site then.

Any other ideas/input?

Superdust

Hi Im setting up a new PPPoE network, based on RB1100AH as PPPoE concentrator and Usermanager, with RB1200 as routers on each site. see the attached image. Do I have to route public subnets to each site (for clients), and assign users on each site to these. Example if user1 is connected at site A, h...

Superdust

No comments from MT?

Superdust

I have had the same problems a lot of times, sent requests to MT support etc. Have not seen this script until now, and it seems to work. But this problem has been there for several years, think I had this problem in 2009! Since it has caused me a lot of headaches :( Is there not any way to fix this ...

Superdust

I have done some testing, and it seems to be SNMP packets making them freeze. SNMP syslogs and traps, going through management VLAN, these are sent as ethernet broadcast. Some times when a lot of devices reports errors at the same time, these SNMP broadcasts reach 5000PPS. And this seems to make a l...

Superdust

Tried Latest 5.0 with latest boot.
Tried 4.17
Tried 3.30
Tried 3.28

All the same.
I have several units this keeps happening to.
Some are brand new, some about a year old or so.
I`m really lost on what to do here

Superdust

Thank you, will try latest 5.0 and upgrade to latest boot an a couple of the problem boards to see what happens.
Thanks again!

Superdust

Sorry, on a site without phone coverage, but got internet

Please share your solution to this problem, what did you have to do?

Superdust

Thank you for the tip dallas

But on most of my routerboards I do not have EOIP tunnels.

Need help with safe ROS and boot versions real quick here (if this was the solution for most of you?), this is killing me

Superdust

I also had this problem now, with several boards.
This is killing my reputation

What ROS version and boot is recommended to use?

Superdust

Thank you, just what I was looking for.
Any way to do this with bursting?

Superdust

Thank you very much for tip.

But I can not use hotspot.
Any way to do this, just limiting bandwidth on clients?

Superdust

Hi

I`m setting up a RB750G as a router for a WiFi network with 10 users.
All share a DSL connection.

So I want to limit download and upload speed for each connected client.

Want each to have download speed of 5Mbps and upload 400Kbps.
60s burst 10Mbps/1Mbps

How can I achieve this?

Superdust

For anyone else interested, I found 4.11 to work for me.
The newer ones seems to be broken.
At least for me, I use PPPoE and Usermanager.

Superdust

Hi

I need ROS and UM 5.0RC4 for PPC.
Is there a archive of old releases, or where can I fin this?

Superdust

UM 4.16 and 5.0RC8 both do not work for me. Was running 5.0RC8 for a few days, then suddenly it started not authenticating logins. Just says "PPPoE connection from was already active - closing previous one". An then in PPP sessions pppoe-0 appears, in stead of customer name, and it just dr...

Superdust

Thank you.

I installed UM 4.16, and all seems fine

How many users have you got on you RB1100?

Superdust

Sorry, I can not answer your question.

But I thought as you have some experience with syslog and ROS, that you might help me

http://forum.mikrotik.com/viewtopic.php ... 13#p245113

I get ACCOUNT, WIRELESS, SYSTEM etc instead of hostname...
Any ideas?

Superdust

Thank you, it saved my day!

Superdust

Hi Need some urgent help to revive 4 RB711. Long story short. We use ROS 3.30 on most of our MT gear. And when I got my RB711s I connected them to my PoE switch and started downgrading to ROS 3.30 Don`t know what stopped me, but when I got to number 5, I tried to log on to the firs one again, and di...

Superdust

Bumping this, any help here.
Struggling with my logs

Superdust

Sorry for troubling you with this.
But I realy need some tips here.
Need high performance and stability.
Witch version do you reccomend.

Superdust

Hi

I`m setting up a RB1100 to use with usermanager.
What is the best perfoming, most stable relese yet?
Need some help choosing

Superdust

$ModLoad ommysql $template cacti_syslog,"INSERT INTO syslog_incoming(facility, priority, date, time, host, message) values (%syslogfacility%, %syslogpriority%, '%timereported:::date-mysql%', '%timereported:::date-mysql%', '%HOSTNAME%', '%msg%')", SQL *.* >{mysql_server},{db_name},{db_users...

Superdust

Any help on this

Superdust

Hi I`m logging my network equipment with rsyslog on a Ubuntu 10.04 server. This works quite well, except a strange problem with my Mikrotik equipment. On the Mikrotik boxes I run ROS 3.30 When syslog eneries appear from these, host name is very strange. It can be: - wireless,debug - wireless,info Ho...

Superdust

Thank you for your help.
Got it going now

Superdust

Hi

Need some help setting a RB750G up as a simple router.

Want one port as WAN with static IP setup.
All other ports as LAN ports.
DHCP server.
NAT.
Simple firewall.

Just as a standard Linksys or Netgear, only faster

Any configuration examples or script files available?

Superdust

I`m moving a UM installation over to a RB 1100.
It will also be a main router.

How many users do you recommend with this setup before moving on to something more powerful?

Superdust

Thank you for quick reply.

I will set up extra radios, so that is ok.

I forgot to mention that I have mainly a L2 network setup with VLANs etc.
Will this OSPF setup work for this scenario?

Superdust

Hello I have 2 radio jumps where I want redundancy and more bandwidth. The jumps are no like this: A <-> B B <-> C There is one radio link between A and B, and one link between B and C. And the capacity is used in point B and C I now plan to set up another parallel link between A and B, and a parall...

Superdust

I want to make limitations for users, witch should only be allowed to have access for five hours after first logon (not able to split it up, and use time later after five hours passed sins first logon). And I want to make users that have 24 hours available, but they can use this time as they like (s...

Superdust

Sorry for nagging about this

But I really need a good and reliable guide to move all my users.

Superdust

Anybody?

Superdust

I`have got myself a new RB1100 :D Witch I want to move my UM setup to. I use UM4 When I do a "export" from terminal, things like the user names and passwords are exported, but not profiles, limitations etc. How can I move everything over to my new RB1100 I do not want to manually add every...

Superdust

MTU on interface is 1522.
But can the EoIP tunnel transport my VLAN trunk?
What must the MTU be on the EoIP tunnel to correctly transport the trunk?

Just checking here if this is possible to achieve, before I begin testing

Superdust

Hello I have a leased line witch I need to transport a VLAN trunk. The line is a single VLAN, they cannot give me Q in Q. MTU on this connection is 1522. Any way I can transport my VLAN trunk over this line? Maybe use EoIP? Is the MTU of 1522 enough to achieve this, what should I set as MTU on the E...

Superdust

I`m setting up a RB493AH as a switch, witch I will be using for filtering traffic (bridge filter). What I want to do is set up all ports as trunks (by adding all ports to the same bridge, the RB seems to do this). Then I want the RB to have an IP address on one VLAN for management, VLAN 100. Can`t f...

Superdust

Could it be a setting in hotspot, radius etc that makes this happen?

Superdust

Hello I have set up a Usermanager and Hotspot solution. ROS 4.4 and Usermanager test 4.4 It works great, stable and fine. But some of the hotspotusers have more than one Computer that they want to use simultaneously. I then try to set shared users in user manager to 2, but still they can only logg i...

Superdust

Hello I have set up some RB433AH base stations with R5H radio cards. With these I use 90deg 16dB sektors from Mars. But I don't seem to get good performance. Even on some that has only 5 CPE connected. All CPE`s have free LOS and is within 2-4 Km. CPEs is 20dB MTI wireless edge enc, with RB411 On th...

Superdust

We have no luck with MT N solutions yet. But I think there is hope very soon... The other day I got new FW for my Strix Nitro II from Witelcom, and now finally it`s stable. Before it was acting just like my MT links, pore throughput, link loss etc. Now it`s rock stable, giving me 80Mbps fdx (tcp ftp...

Superdust

I found the problem.

When logging in I used to use http://192.168.168.1/usermanager
Now I tried http://192.168.168.1/userman and it worked again.

A bug?

I must say, I bought a bunch (400+) of routerboards and licenses, but the support is not impressive

Superdust

Please, anybody got some tips here?
Really desperate

It will be so much configuring do do again

Superdust

Thank you.
I will use that as a last resort.

Anyone else had this happened, and solved it?

Superdust

Please, I need some help here. I have tried everything. When I check the password in terminal I can see that it is correct. But still when trying to log on to the web interface i get "invalid username or password". I also tried adding a customer from terminal, setting password etc. But I g...

Superdust

Hello I was running UM 4 beta 2. Now I have upgraded to UM 4 test 2. The upgrade did`nt go well. No users were visible after update etc. So I deleted UM DB and log, and installed it from scratch. Added routers, users etc. Now suddenly I cant log in with my admin account... I checked the password in ...

Superdust

Anybody?

Superdust

Thank you

How will this work?

LAN -> IP in Simple Queue -gets speed set in simple queue
IP in Simple Queue -> LAN -gets speed set in simple queue
LAN -> ALL other IP -gets speed set in profile User Manager
ALL other IP -> LAN -gets speed set in profile User Manager

Superdust

Hello I want to do a complete reinstall of ROS on a RB433AH. How would I do this... The reason I want to do this is that I have a couple of test boxes with all kind of weird configuration on them. An the reset command from CLI does not take care of all (usermanager, HTML, logs etc). Just want everyt...

Superdust

Hello

I have set up a hotspot, with usermanager.

The users of the hotspot should get 10Mbps on local addresses 192.168.1.0/24 and 10.1.0.0/24.
When accessing all other (WAN) the profile set in usermanager should apply.

How would I achieve this?
Need a good explanation as I`m a novice.

Regards.

Superdust

Anybody got tips here.
Need a simple guide.

Superdust

Hello

I have set up a hotspot, with usermanager.

The users of the hotspot should get 10Mbps on local addresses 192.168.1.0/24 and 10.1.0.0/24.
When accessing all other the profile set in usermanager should apply.

How would I achieve this?

Superdust

Ok, thank you. I can`t see that there is any options for making the D-Link send password in any way. The best now I guess is to reset all configuration and try again. What type of setup shuld I use for this senario? I do not want to use MAC for autentication, users must be able to use different comp...

Superdust

Username is:test
Password is:demo

Superdust

What 5Ghz canals can I use in Serbia?
Any with 40Mhz width?

Superdust

I really need some help with this.
Need it running by the weekend.

Anybody got tips to this kind of setup?

Superdust

Sorry, I was a bit unclear. The RB does not have a WLAN interface. It is only for usermanager/radius use. The D-link AP(s) will be wired to the RB. Clients connect wireless to the D-link AP. I use these APs because they are a part of existing infrastructure. In future they will be exchanged for MT A...

Superdust

Thank you eneimi I tried setting the AP up with just WPA or WPA2, but the results are the same. Should it not be possible to run auto here? WPA2 if supported by client, WPA if not? I tried setting this up according to the "wireless" guide in the wiki. Witch setup should I have used? What I...

Superdust

Hello I have set up usermanager 4B4 on a routerboard. Added a test user to usermanager. A D-link wireless AP is connected to this RB. On the D-link I have set up: Authentication wpa enterpise WPA Mode Auto wpa/wpa2 Cipher Type Auto RADIUS Server 192.168.2.18 Port 1812 RADIUS Secret 1234 D-link has 1...

Superdust

Hello I`m deploying 10 wireless APs with radius support. This is in a hotel. I wan to use usermanager for access control. And to set limitations on bandwidth per user. Also to access some local resources I need all clients to get 10Mbps in local network (not limited to what is set in usermanager). H...

Superdust

Hello

I have quite a few routers not connected to the internet.
Some of these I want to upgrade to ROS4.0B4.
But how do I get a new key for these?

Superdust

CoA and CoA Disconnect request in not enabled, should I enable these?

Superdust

Database is small.
I can access UM web page while the problem exists.
Seems like it must be something else.

I see this happen sometimes when clients change client equipment also.

This seems to happen for users set to Shared users 1, if set to unlimited I won`t have this problem.

Superdust

Hello I have some really annoying problems with a User Manager/PPPoE setup. Running ROS 4.0 B4 When a network failure/ power failure etc disconnects clients, they can`t connect again. Message in log: 12:18:38 pppoe,ppp,info <pppoe-1>: terminating... - user tommy authentication failed - radius timeou...

Superdust

I also need this kind of setup.

It`s at a school, where access to local file shares etc should get 10Mbps, and internet access should get what is set in userman.

Please post setup guide.

Superdust

Hello

I have set up Usermanager and PPPoE on a RB1000.
How can I make a firewall for PPPoE users (witch interface etc)?

Superdust

Any ideas on this?

But how would one solve this.
In on eth I got a trunk.
WLAN1 is a sector witch should have only VLAN 15 and 16.
WLAN2 is a P2P link witch should only have VLAN 10.
WLAN3 is a P2P link witch should have the entire trunk.

Superdust

Takk skal du ha Vegard 8) Thank you Vegard That works. I set a filter on the wds-bridge to allow forward with packets tagged with the 2 VLAN IDs, and drop all other. But how would one solve this. In on eth I got a trunk. WLAN1 is a sector witch should have only VLAN 15 and 16. WLAN2 is a P2P link wi...

Superdust

Hello

I have some APs set up as AP Bridge, and using WDS.
In on the ethernet interface I have a trunk with several VLANs.
I only want 2 of these (15 and 16) to be sent out in the WDS.
Bot I want to keep the tags, untaging vil happend at the CPE.

How would I do this?

Superdust

Yes, and that is ok.

I just seem to remember that girts sayed that it would be released last month.
So I have been checking the download link several times per day after that.

Superdust

Any news on when new beta with Profiles enabled will be available?

He he, I relay need this

Superdust

Yes, but it`s not quite that easy, as some of same traffic is useful. What one wants is as open as possible, and as safe for clients as possible... Just trying to find out what other ISPs with similar setup set in their firewalls/acl, and adapt good policy's. I guess most ISPs face similar challenge...

Superdust

Hello All of our clients get public IPs. Blocking port 137,138,139 and 445 was done early on, protecting clients with windows and no firewall. We are seeing a lot of attacks on our networks from external botnets etc. Lately we had a lot of ICMP ttl expired attacks, so we had to rate limit these pack...

Superdust

Thank you. So if I in pool1 define pool2 as next and in pool2 define pool3 as next and so on, I only have to define pool1 in all users added in Usermanager? If I would like to give some users static IPs, would I then make a separate pool for these, and just type in a IP from this pool in Usermanager...

Superdust

I also have the active sessions refresh problem.
Very slow update.

I try to refresh page, logout/in without result.

Would be nice to have update every 10s or so.

Superdust

Hmm I`m not sure I understand. I have created a pool, "pool1". Here I specify addresses from 192.168.2.2-192.168.2.125 (just an example, I use official IPs). When adding user in Usermanager, I add the text "pool1" in the pool name field, and let IP address stand black. Logging on...

Superdust

Thank you cylent Is not spanning tree used between switches for redundancy? Must the client switch also have spanning tree then? The case is that the client makes a storm in his network (witch I have no control over), and this spreads over my bridge, and makes a lot of trouble in my network also. Th...

Superdust

Hello

When adding new user in Usermanager I have to spesify IP pool.
Is it possible to have several pools, and make usermanger choose available IPs from all selected pools?

If I would like to add static IP for users do these have to be in a pool, or how would I do this?

Superdust

Hello

I have some clients witch is connected to my network directly via RIC/522Ts, set up in WDS mode.

The other day one of these managed to make a loop in his network, and this spread to my network.
Is there any way to protect my network against this, still using the bridged setup?

Superdust

Hello I have set up an base station with a sector connected to a XR5 mini pci card on a RB433AH board. Clients connected to this base use RB411A and R52/R52H. All use ROS 3.24 Problem is that clients disconnect all the time, one and one, not all at the same time. Also with different inter walls, 3-3...

Superdust

Maybe I did`t express my self right. What I want is when running my script, it will set a bunch of settings I use for all my CPEs. But some of the settings will be different on each unit, for example IP address on a interface. Any way to make the script ask for this in terminal, so that I can apply ...

Superdust

Sorry, do not mean to nag about this.

When do you think the usermanager with profiles support will be released?

Superdust

Hello

I have made som basic scripts with help from export function in ROS.
Is there a possibility to add manual inputs to scripts.
For example when script comes to setting IP eddress on interface, terminal promts for ip address?

Any easy way to do this?

Superdust

Hello Testing usermanager B4.3, and cant wait for final release, seems great. I have a small problem now though. Some users witch I have set to shared users 1 can`t log in any more. Checking active sessions, this user have now sessions active. But if I set shared users to 2, he can log in again. Any...

Superdust

Hi

Is there a web based SNR/signal readout built in ROS?
I thought it would be a good idea to make it easy for the customers installing their outdoor CPE, and getting up a signal bar on their PCs.

Superdust

That works, thank you!

Superdust

Thank you. I have now made some simple rules, and it seems to work well. But I need some help with this scenario. I have clients with RB411 based equipment. The only thing that should pass through is PPPoE to the Usermanager box. The clients is set up as wds bridge. PPPoE clients will connect to eth...

Superdust

Thank you sergejs.
This feature sounds great.

Will there be a select list when adding user for assigning profile?
When do you think this feature will be ready?

Superdust

Hello I`m trying to set up a small WISP system based on PPPoE/Usermanger on a RB1000. For clients I will use different rate limits. 1Mbps down, 300Kbps up 3Mbps down, 700Kbps up 6Mbps down, 1Mbps up When adding new users it would be nice to be able to link customer to a profile that has these rate l...

Superdust

Ahh, the error was there, thank you

Superdust

Hello I need some help securing my network. I got a router box, RB1000 witch has a public IP and a private IP. It is used as PPPoE, Usermanager and router. I would like to only be able to reach management (ssh, telnet, winbox, usermanager-web etc) from one subnet 10.1.0.0/24. Also PPPoE should only ...

Superdust

Hello I have set up a board with ROS 3.23 PPPoE server and User Manager. Everything seems to work fine, I can log on, add users etc. But when connecting with PPPoE client, it disconnect immediately. Login and everything is a success... Under the User Manager web interface /Logs it says authorization...

Superdust

Hello

This might be a dumb question, but here it goes...

How, where can I get superchannel license for my MT equipment?

Superdust

Hello

Is there å good way to rate limit layer 2 bridges (WDS)?
I tried the simple Queues, but it does not seem to have any affect.
I want both rx and tx rate limit.

Hope somebody has tips

Superdust

Hello, I need some help with a petty simple setup. I have a L2 network witch I want to use with Mikrotik base stations and clients. The network is based on VLANs. I use one VLAN for management and others for client internet access. Is there a possibility to use Usermanager on this setup? I want to u...

Superdust

Yes, but in these cases signal was to high, what then?
And with the xr5?

Superdust

Hello I have some TX power questions. I have a lot of the old RICs with the RB532 board. When I have close links, I set TX Power to manual, and experiment with the 3 highest speeds down in 1db steps. So I get SNR down to about 50db and signal strength around 45dbm. But now I have set up a p2p link w...

Superdust

Hello

I use some Cisco an HP switches in my network.
On these there are many VLANs defined.
I have problems getting PPPoE working over VLAN it seems (mikrotik clients).
Everything else works just fine, but PPPoE seems to brake.
Anybody know if VLAN and PPPoE is incompatible?

Superdust

Hello I use a lot of RICs with RB 532 and RB 333 with the standard 65mw card for short p2p links etc. Some of the shortest links have more power than they need (snr 60-70). What is the best way to adjust this? Is there a way to make this autoadjust, so that it uses more power in snow/rain etc, and l...

Superdust

Ok, thank you.

What is default on MikroTik.
public no password, and private no password?

Superdust

Hello I bought some RIC522T I use for WDS PTP bridges. This may be a stupid question, but how do I monitor these in Cacti. I wan`t to graph SNR, CCQ etc. I do not have the skills to make my own templates. When I added one of the radios as generic SNMP device I got a SNMP error. Is there any easy how...

Superdust

Hello

I need some tips on witch radio planning tool to get.
My network is becoming a bit to big to plan just on paper.
I need a tool to plan frequencys, jumps and sektors. And to keep the big picture on the network.

What do you use?

Superdust

Thank you brasileottanta.
I`ll try it.

Superdust

Another thing, is it possible to get 2 router boards on each side of a jump to work together, giving redundancy and more bandwith/prosessing power?

Superdust

Hello

If you have LACP capable switches in each end, and set up 2 MT jumps, will it work?
I mean with one par RIC522 I get 45Mbps TCP throughput, using two pairs I could get 90Mbps with LACP?

Superdust

These frequencies are open in Norway, and we use it on Alvarion etc.
But they don`t appear in MT even with country set to Norway.

Is there any other Countrys I can choose to make them appear?

Superdust

Hello

On some of my equipment i run channals from 5500 - 5700Mhz, but I don`t get these up in the MT configuration.
Why?

Superdust

Some stupid questions about RIC/522

Is it only 20Mhz bandwith in 5Ghz band?

I got the 5Ghz 5Mhz, 5Ghz 10Mhz and the setting that is called just 5Ghz, i guess this is 20Mhz bandwith?
Is there no 40Mhz wide 5Ghz cannel?

Superdust

Thank you for many good tips

The choises are now:

-Apache
-Radius
-My sql
-PHP my admin
-Dialup admin

or

-Apache
-User Manager

But witch is the most stable solution?
Anybody been running both solutions?

Seems like User Manager might be the most smooth solution, as it`s all in one....

Superdust

Thank you krigevr

So what I need is....
-a box with a Linux distro.
-install free RADIUS
-Install MySQL
-Connect free RADIUS and MySQL

What web interface do you use?

Superdust

Hello. I need some help with finding a radius solution. What I want is a server to control access to a large wireless network. Am locking for these features: -Individual bandwith setting (groups and clients) -Captive portal -Web interface (adding ,remowing, blocking etc clients) Any tips for softwar...

Superdust

Hello

I have som sites witch is near each other, an I`m planing on using MT P2P links.
If I use 5180Mhz on one site and 5200Mhz on the other, 20Mhz resoluton, will they interfear with each other?

Superdust

Bumping this.

Anybody?

Superdust

This is really great!
Hope some good tutorial vids also will arrive....

Superdust

Maybye the new boards will be some improvements to

It`s not always so good using x86 systems on all locations.....

Superdust

Hello A MT noob question. I`m setting up som MT base stations, and would like to set up some different client profiles. About 15 clients will connect to each sektor. If I want some clients to have 1500/500Kbps and some to have 3000/700Kbps, how do you reccomend setting it up? By the way, on the MT s...

Superdust

So you get better throughput with eoip that wds on p2p lik?
I use the guide in the wiki http://wiki.mikrotik.com/wiki/Transpare ... o_Networks
And get about 16-18 Mbps (real tcp throughput) 20Mhz channels in 5G, could I get more using eoip?

Superdust

Thank you for the info on this

This means I`ll still be using Alvarion B100 in backbone, or MT with X86?

Superdust

How do one attach ETH1 to bridge Untagged?
I can`t find any options for this in winbox....

Superdust

Thanks again Diganet for replying.

I`m not asking for the whole setup.

It`s the VLAN setup via winbox I don`t get and would like some instructions for.
There fore I made the drawing, so that you could see what cind of VLAN setup I was attempting.

Superdust

Can anybody help with this setup, I need some winbox instructions

He he

Or is it not possible?

I use this kind of setup with my Alvarion equipment.

Superdust

OK, I made a drawing of the setup. As you can see the clients computers is connected to the ethernet port on the CPE or they have their private router connected. The ethernet port on the CPE needs to have static access to the VLAN the service that the client subscribes to is on, because the coutomer...

Superdust

Sorry you guys, can`t get this to work :( I use AP in AP bridge mode, WDS mode Dynamic The clients is set up as station WDS, WDS mode disabled. Is this a ok way to set it up? This setup carries all vlans across the network, and if I use vlan capable equipment at the clients I can choose witch vlan I...

Superdust

Ok, this is R52 limitations, or all compatible radio cards?

Superdust

If you get the newest maggelan GPS maps, and use mapsend lite you can get profiles like that automaticaly.

Superdust

For Mikrotik products 100 simultaneous calls on a routerboard it would be a good limit. Regards. Is this wired or wireless, witch routerboard? Does this mean that you would get 22000-23000PPS? I`m asking this because I was planing to use MT for backbone also, but if it can only handle 8000PPS wirel...

Superdust

There are some very good link calculators that take into account your geographical location and give you uptime calculations for the whole year, and also give "worst month" uptime which can be substantially different.

Any calkulators like this that is available online?

Superdust

First of all you need to get Cacti up and running on a PC or server. I haven`t actually began graphing MT equipment yet (as I just began testing it), but I have Alvarion, HP, and Cisco witch I`m graphing. The easyest way is to find Cacti templets for yor equipment, and add these to Cacti. Then follo...

Superdust

Ok, so using RB532 as P2P WDS transparent bridge, you can only push 8000pps?
Any better board for P2P use?

Superdust

Yes, you can.
But it will be mutch work

Depends on how many users you have thogh if you have like 15 you will set it up in a day

Superdust

You can use cacti for this http://www.cacti.net
It will be mutch work thogh

Superdust

He is saying mutch more, witch is right?
http://forum.mikrotik.com/viewtopic.php ... &hilit=pps

Superdust

Ok, wakeupcall

Is there any other routerboard with more performance?
Or you have to go with pc hardware?

Superdust

Does this mean that using RB532 as backbone link also has the same limitations?

Superdust

Thank you for clearing that up Nick.

I didn`t concider that

Superdust

Great idea!

Very interesting videos, and hopfully more to come.

Superdust

But let`s say that the uplink to the AP carries 10 VLANs (no one is untagged), for different services, companies etc. Then I hock up a client to this AP, the service that the client is supposed to have is on VLAN 13. To the RIC/522s ethernet port he want`s to connect his PC to use the service, then ...

Superdust

Thank you for answering. But I am afraid I`m going to need more help. I can`t seem to get VLANs untagged at the ethernet port. I created a bridge and added the VLAN with correct ID under it, but how do I untagg it for the ethernet port? The links carry a trunk, and the clients equipment don`t suppor...

Superdust

Each voice call with good quality would take about 64Kbps full duplex, so about 125 calls I would guess.

Superdust

Anybody got experience in using RIC/522C CPE`s in wintertime, -30 celsius, and shifting weather that might cause condense + strong winds?
I ask because the units seem a bit flimsy

Superdust

What was the actual problem?

Superdust

This setup sounds interesting.
Do the link transfer all layer 2 information?
How mutch throughput you got in real life tcp?

Superdust

Sounds great pinam. Would be nice to graph snr and traffic to se where problems come from. How do you do it when you add new clients to your AP, or even new AP with lets say 13 clients, you have to add each client manualy or can you "search" the ap for interfaces like for example a switch ...

Superdust

I dont know about this one, but with a small radome with 25DB gain I get 20Km with no problem.

Superdust

Hello, enybody here use Cacti for monitoring?

I want to use Cacti for graphing each client connected to the MT AP, is this possible?
How to do it?

Superdust

Ahh, sorry about that

Superdust

I use som alvarion equipment, here you have to know yourself what band you can use.
How about adding an option in MT for expert user etc where all is open.

Superdust

I realy hope MT could come up with a wimax solution.
Wimax equipment today is really to expensive.

Wimax is great though, good nlos capabilitys and great range.

Superdust

Hello With ouer wimax equipment we use a sentral control software where we can see the coustomers signal up/down, error frames etc. We also control service profiles etc "basic" 2000/500Kbps "fast" 3000/1000Kbps "super" 4000/1500Kbps etc. Coustomers witch don`t pay, we j...

Superdust

Hello I`m new to mikrotik. And I now have a test setup going with some RIC/522 clients and a MT base station. I can`t seem to find out how to untagg a vlan on the ethernet port on the CPE (so that the coustomer don`t get a truk, only the vlan he is supposed to be in). And how to put the bridge IP on...

Superdust

Hello. I`m all new to Mikrotik. But we have set up some wimax base stations, and used different backhaul links (5GHz, 18GHz etc). This equipment has been working very well for us, but the price is quite high. So when trying to reach just a few houses in the country side we decided to give Mikrotik a...

Search found 182 matches