Community discussions

MikroTik App

Search found 63 matches

by nexusds
Mon Jan 15, 2024 9:22 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 257320

Re: v7.13.2 [stable] is released!

on CRS326-24S+2Q+ had to disable L3Hw settings or traffic was very slow.

config is only a switch with vlans (no routing or firewall rules).
by nexusds
Mon Jan 15, 2024 9:19 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 257320

Re: v7.13.2 [stable] is released!

What's new in 7.13.2 (2024-Jan-12 11:51): *) leds - fixed default LTE LED configuration for wAPR-2nD; *) lte - fixed cases where FG621-EA modem could be missing signal information in "lte monitor" (introduced in v7.13); *) routerboard - added "reset-button" support for RBwAPR-2n...
by nexusds
Fri Jun 16, 2023 11:52 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 369
Views: 129344

Re: v7.10 [stable] is released!

default ipsec phase1 profile algorithm (when used for eoip for example) if using DES will no longer work.. have to change it to something else (I chose aes-256 - didn't test other algorithms as I would need to adjust a number of units)
by nexusds
Fri Jun 16, 2023 11:46 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 369
Views: 129344

Re: v7.10 [stable] is released!

After upgrade to v7.10, seeing problems with switches using the 98DX8212 switch chip.

Ticket is SUP-119408
what is the issue you are having?
by nexusds
Wed May 31, 2023 8:09 pm
Forum: Wireless Networking
Topic: WifiWave2 debug logging and strange iot issue
Replies: 18
Views: 4436

Re: WifiWave2 debug logging and strange iot issue

Ive been testing all different versions and 7.8 is the most highest version stable with regards to this issue for us. I've emailed mikrotik support and they suggest me to try and install 7.10rc1, so maybe I'll try it first.. thanks for the feedback tho~ According tho your post #10 above you're usin...
by nexusds
Tue May 30, 2023 7:05 am
Forum: Wireless Networking
Topic: WifiWave2 debug logging and strange iot issue
Replies: 18
Views: 4436

Re: WifiWave2 debug logging and strange iot issue

I'm so confused, the 7.9 shows the fix for this issue (probably this) : https://mikrotik.com/download/changelogs *) wifiwave2 - fixed key handshake timeout for re-associating client devices on 802.11ac interfaces; but It still happens.. try using 7.8 do you have a similar issue and tested 7.8? I do...
by nexusds
Mon May 08, 2023 7:32 pm
Forum: Announcements
Topic: v7.9 [stable] is released!
Replies: 242
Views: 54446

Re: v7.9 [stable] is released!

ok, make that 4 of us, both of my Hap AX3 completely drop wireless clients after around 24 hours. They continue to advertise the SSIDs but no new registrations occur. I'm using CAPsMAN server on one AX3, the other AX3 is a client. Both stop registrations. As a test I rebooted the remote 'client' AX...
by nexusds
Mon May 08, 2023 7:24 pm
Forum: Announcements
Topic: v7.9 [stable] is released!
Replies: 242
Views: 54446

Re: v7.9 [stable] is released!

initially reporting issues with 4011 @ 10Gbps issues on SFP, now it seems an issue also with CR354/CRS326 All use different DAC/SFP+ modules with same issue. hard coding links to 10G or auto make no difference.. shows connected but very little data seems to go through (<1Mbps) or drops packets. roll...
by nexusds
Fri May 05, 2023 8:22 am
Forum: Announcements
Topic: v7.9 [stable] is released!
Replies: 242
Views: 54446

Re: v7.9 [stable] is released!

Also showing dropped packets making it unusable on RB4011iGS+ You are also thinking that "rx drop" indicates a problem? No, actually dropped packets and very slow/dropping speeds (nothing more than 100-200kbps).. took a lot of playing around and rebuilding to discover that 7.9 package sto...
by nexusds
Thu May 04, 2023 11:45 pm
Forum: Announcements
Topic: v7.9 [stable] is released!
Replies: 242
Views: 54446

Re: v7.9 [stable] is released!

Also showing dropped packets making it unusable on RB4011iGS+

In my case, it is using SFP, I see other poster was Ether2.. so some issue with some versions of the RB4011
by nexusds
Fri Jan 13, 2023 2:25 am
Forum: Announcements
Topic: v7.7 [stable] is released!
Replies: 357
Views: 113103

Re: v7.7 [stable] is released!

Seems update server is unreachable at the moment
by nexusds
Thu Oct 20, 2022 1:22 am
Forum: Announcements
Topic: v7.6 [stable] is released!
Replies: 279
Views: 142494

Re: v7.6 [stable] is released!

Have problems on a CCR2004-16g-2s and sfponu module. Issue shows after firmware update add next boot, no pon link at sfp. SFP is visible and hardware info is ok, but no pon link. So after every firmware update i need get out sfponu and insert it again, only after that pon link is ok. Simple rebooti...
by nexusds
Wed Oct 19, 2022 7:39 pm
Forum: Announcements
Topic: v7.6 [stable] is released!
Replies: 279
Views: 142494

Re: v7.6 [stable] is released!

Have problems on a CCR2004-16g-2s and sfponu module. Issue shows after firmware update add next boot, no pon link at sfp. SFP is visible and hardware info is ok, but no pon link. So after every firmware update i need get out sfponu and insert it again, only after that pon link is ok. Simple rebooti...
by nexusds
Thu Sep 01, 2022 7:13 am
Forum: Announcements
Topic: v7.5 [stable] is released!
Replies: 219
Views: 68922

Re: v7.5 [stable] is released!

Updated to 7.5 stable and have issue with sfp+. Every time I software reboot RB4011iGS+5HacQ2HnD, I keep getting "sfpplus1 fcs error on link" on sfpplus1 of CCR1016-12S-1S+. Winbox is connected to CCR1016-12S-1S+ as its the main router that everything connects to. The way to fix RB4011iGS...
by nexusds
Wed Aug 31, 2022 11:28 pm
Forum: Announcements
Topic: v7.5 [stable] is released!
Replies: 219
Views: 68922

Re: v7.5 [stable] is released!

Yes Support as an auto generated supout since it crashed the CPU with the load.
by nexusds
Wed Aug 31, 2022 8:54 pm
Forum: Announcements
Topic: v7.5 [stable] is released!
Replies: 219
Views: 68922

Re: v7.5 [stable] is released!

WAP60G station-bridge (WAP60G-AP are ok as bridge-ap) causing high bandwidth (20-30Gbps) only on wlan60-1 interface and 1xcore CPU spike upon management login. 7.4.1 works fine - only a problem on 7.5
by nexusds
Mon Jun 13, 2022 6:25 pm
Forum: Announcements
Topic: v7.3 and v7.3.1 [stable] is released!
Replies: 269
Views: 80231

Re: v7.3 and v7.3.1 [stable] is released!

I notice that ipv4-fast-path is not working on v7.3 whilst the same config with v6.48.6 fast-path is working as expected, there were no firewall rules in this machine just BGP and OSPF, is this expected because route cache is no longer available it v7? [rchan@SS-CRT] > /ip settings/print ip-forward...
by nexusds
Mon May 09, 2022 6:53 pm
Forum: Announcements
Topic: v7.2.2 [stable] and v7.2.3 [stable] are released!
Replies: 401
Views: 80729

Re: v7.2.2 [stable] and v7.2.3 [stable] are released!

using winbox 64-bit v3.35, watching PPP active sessions still shows random connected sessions that are not really there (disconnecting winbox and connecting back doesn't show these phantom sessions)
by nexusds
Sun Apr 17, 2022 6:04 pm
Forum: Announcements
Topic: v7.2.1 [stable] is released!
Replies: 240
Views: 46175

Re: v7.2.1 [stable] is released!

Although it would seem like a bug in winbox (using 3.35 64-bit) , it only happens with 7.2.1 router connections; - showing a list of Active PPP Connections, if a connection disconnects and reconnects, it then shows 2 connections (old and new) - if continued disconnect and reconnects happen, more ses...
by nexusds
Thu Apr 07, 2022 4:30 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60954

Re: v7.2 is released!

Yes, even in v6 prefix lists were left only for compatibility from older versions. Now they are removed and you have to account for that when upgrading. ok. i honestly didnt know there was any other way to do filtering without prefix lists in 6.x for RIP. for BGP yes, we use route filtering for tha...
by nexusds
Thu Apr 07, 2022 4:06 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60954

Re: v7.2 is released!

If using Prefix Lists, are these depreciated in 7,x?
Yes, prefix lists are deprecated, now everything is filtered by routing filters.
That's fine, just in 6.x it seems you can only use filters for RIP but they don't migrate to filters upon upgrading, so its an additional step to account for?
by nexusds
Wed Apr 06, 2022 5:03 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60954

Re: v7.2 is released!

Routing filter or prefix-list was removed? If it was routing filters then please provide the export from v6 routing filters that did not upgrade. Good point, Ill have to restore an image to check, but I believe for RIP I was using Prefix Lists and for BGP I use Routing Filters. If using Prefix List...
by nexusds
Wed Apr 06, 2022 4:06 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60954

Re: v7.2 is released!

Upgrading from 6.49.5 to 7.2 - RIP filters removed in migration, added back using new method (Rule) and applied. not sure if anything else missing, but working so far, so assuming just filters were missed in migration
by nexusds
Tue Apr 05, 2022 10:23 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 60954

Re: v7.2 is released!

Issue with 7.2

I try to upgrade CHR 6.49.5 running DUDE to 7.2.
at reboot "no system package found!"
Kernel panic.
Dude server isn't released yet for 7.x under any platform that I know of.
by nexusds
Sun Mar 06, 2022 7:37 pm
Forum: Announcements
Topic: v7.1.3 is released!
Replies: 251
Views: 56256

Re: v7.1.3 is released!

CRS112-8P-4S: Not usable after upgrade from 6.49.3 to 7.1.3 (soft- and firmware) Working for some minutes after booting, then ports are starting to flapp and the data transfer between the clients is interrupted permant. 19:20:06 system,info,account user XXXX logged in XXXX via winbox 19:20:27 inter...
by nexusds
Wed Feb 23, 2022 6:43 am
Forum: Announcements
Topic: v7.1.3 is released!
Replies: 251
Views: 56256

Re: v7.1.3 is released!

IPv6 DHCP Client
must disable default gateway if getting DHCP over a PPPoE connection or you have two gateways
must enable default gateway if getting DHCP over Ethernet, VLAN, Bridge or EoIP etc. or you get no gateway
by nexusds
Wed Feb 23, 2022 6:41 am
Forum: Announcements
Topic: v7.1.3 is released!
Replies: 251
Views: 56256

Re: v7.1.3 is released!

NTP Client works, just not right away. leave it and check back
by nexusds
Tue Feb 15, 2022 5:56 am
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 39067

Re: v7.1.2 is released!

"I have 20+ boxes running 7.1.1 and 7.1.2 in full production with full BGP feeds. We see issues with 6.x on BGP that were solved with rolling out 7.x. Things like routers crashing ospf when full feed neighbour went dont." Which units did you upgrade using full BGP and was it seemless upgra...
by nexusds
Fri Feb 11, 2022 11:34 pm
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 39067

Re: v7.1.2 is released!

I had the common issue where router board firmware update required a hard power cycle, after which point, the device booted normally, with the upgraded firmware, on a CRS328-24P-4S+. Also, I can confirm, the SFP+ NIC flapping is still occurring on 7.1.2. I didn't see release notes about it, but I s...
by nexusds
Fri Feb 11, 2022 9:04 pm
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 39067

Re: v7.1.2 is released!

Just a bit worrying that more then one said their 3011 dies after upgrade and specifically firmware (router boot). I just did not feel like netinstalling today so if someone know that 7.1.2 with same firmware do not cause a issue I might try this out this weekend. Yes, had this issue on firmware up...
by nexusds
Fri Feb 11, 2022 7:59 pm
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 39067

Re: v7.1.2 is released!

seems adding a new VPLS the VPLS ID field in winbox wont take any normal input (ie 1:1 or 22:22), says "address expected!"

EDIT - this is with previous and current winbox as well as webfig
EDIT - SOLVED - put an & in front.. (ie; &1:1 or &22:22) in the field
by nexusds
Fri Feb 11, 2022 5:26 pm
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 39067

Re: v7.1.2 is released!

A bit worried about 3011 reports here. Anyone who have updated a 3011 including the firmware as well without issues?
We should have some 3011 kicking around.. is there any special config to test?
by nexusds
Fri Feb 11, 2022 2:42 am
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 39067

Re: v7.1.2 is released!

Have it running fine so far on; Routers; HapAC RB450G RB1100AH RB3011UiAS - (System bricked only on firmware update, package update was fine, so reset and restored backup - all good but would be inconvenient in the wild) RB4011iGS+ - from 6.44.7 all good except SFP (Cisco GLC-T) had to be hard coded...
by nexusds
Fri Feb 11, 2022 2:33 am
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 39067

Re: v7.1.2 is released!

Was anyone able to get 7.1 working on a ppc routerboard? I tried 7.1.1 and 7.1.2 on RB333 and the boot failed with "kernel out of range". Even the netinstall is broken, it gets stuck on "waiting for installation server". Is 64MB of RAM not enough for the new version? Have it wor...
by nexusds
Wed Apr 14, 2021 7:30 am
Forum: Announcements
Topic: v6.48.2 [stable] is released!
Replies: 141
Views: 61719

Re: v6.48.2 [stable] is released!

Have upgraded the following and no issues so far large numbers of; HAPAC 450G CRS112-8P-4S Small numbers of; CCR2004-1G-12S+2XS CCR1072-1G-8S+ RB1100AH RB 3011UiAS CRS309-1G-8S+ CRS226-24G-2S+ CRS326-24S+2Q+ CRS354-48G-4S+2Q+ (these had previous port issues that haven't reoccurred since 6.48.1) CRS3...
by nexusds
Tue Mar 02, 2021 10:35 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

For any still having issues with latest version. Can you confirm you are updating system routerboard AND Package or just the Package?
by nexusds
Thu Dec 03, 2020 6:41 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

we are on 6.47.7 and havent had the issue since.. be sure to upgrade the routerboard firmware also?
by nexusds
Tue Aug 11, 2020 9:31 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Curious.. I am not able to replicate it as often as before.. but for anyone who can see it happen a lot, i had a thought.. can you try reducing the CPU frequency in routerboard settings?
by nexusds
Sat Aug 08, 2020 2:33 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Folks - I'm watching this thread as someone with a CRS354 that I simply want to use as a switch rather than a router. Out of interest, for those of you currently using the switch, are you using RouterOS in the absence of SwitchOS for the device or is it the routing capability you need? No agenda, j...
by nexusds
Mon Aug 03, 2020 5:30 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

There were changes added to 6.48beta12 that address this issue, and it fixed the problem for some clients, these changes are also present in 6.47.1. But if you are still experiencing issues with the aforementioned versions, please contact us at support@mikrotik.com or via our support portal https:/...
by nexusds
Thu Jul 23, 2020 2:42 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

+1 Have this problem too, but on ports 16-24. CRS354-48G-4S+2Q+ I have tried on all ROS versions. Port state is UP, but no traffic passthrough to bridge. Only reboot can help. Have you done firmware as well as package update? if you still have the issue on 6.48B12, please email a supout file to sup...
by nexusds
Wed Jul 22, 2020 5:35 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

now I am running ros7.1b, we will see.......
7.1b only has 6.47.1 fixes.. please try 6.48b12
by nexusds
Tue Jul 21, 2020 5:11 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

even with ros 6.47.1 is problem still present
Use 6.48beta12.. all 6.47.x has the issue for sure.
by nexusds
Tue Jul 14, 2020 7:16 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

i installed v6.48beta12 at a customers location yesterday. today switch group 9-16 is completely dead. even after a reboot there is no activity on this ports anymore. connection is detected but no packets passing through. constant 0bps. which model is this and did you update routerboard firmware as...
by nexusds
Fri Jul 03, 2020 5:30 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Just curious, with anyone having the issue on ports 1-8, if you move those to 9-16 (swap the groups).. do you still see the issue on the first group or does it now move to the new group?
by nexusds
Mon Jun 29, 2020 11:39 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

today tried flapping ports one by one did not help.. had to flap all ports in the affected group and the same time to get it back working. this also throws out the auto-recover possibility. its just random at this point.
by nexusds
Fri Jun 26, 2020 7:16 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Beta 7 MAY be resolving the issue by automatically flapping the ports. by the time we had the issue it had corrected itself. although at the same time one device in the port group had rebooted which caused a flap of the one port.. so not sure which one made it work again. will report on any info. al...
by nexusds
Thu Jun 25, 2020 9:42 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Update;
routeros-mipsbe-6.48beta5 does not fix issue
while ports are affected per controller (8 sequential ports), its not always ports 1-8, can be 9-16 or 16-24, etc

latest test beta routeros-mipsbe-6.48beta7 was handed out this morning.. will implement and test this evening
by nexusds
Thu Jun 11, 2020 9:17 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

agreed, although I moved more critical stuff off those ports I havent seen the issue with 6.48B5.

email support@mikrotik if you want to test the file.
by nexusds
Fri Jun 05, 2020 4:02 am
Forum: Announcements
Topic: v6.47 [stable] is released!
Replies: 348
Views: 171955

Re: v6.47 [stable] is released!

another bug ... when going under IP/IPSec/Policy, and opening an existing one seems to exit winbox/crash winbox.
by nexusds
Wed Jun 03, 2020 9:28 am
Forum: Announcements
Topic: v6.47 [stable] is released!
Replies: 348
Views: 171955

Re: v6.47 [stable] is released!

CRS326-24S+2Q+ - seems fine overall, but couple of ports connect to IScsi ports @ 10G to MSA 2040. keep flapping at random times using MW-S-+DA003 (use this for all connections except Q+ for this switch and never had an issue before). will try hard-coding to 10G and see how that goes (luckily not us...
by nexusds
Wed Jun 03, 2020 7:23 am
Forum: Announcements
Topic: v6.47 [stable] is released!
Replies: 348
Views: 171955

Re: v6.47 [stable] is released!

Upgraded a number of switches and routers without issue except (so far) a RB3011UiAS. this one used interface lists for bridges and rules pointing to lists. the bridges seemed to act fine and dhcp client setup to WAN bridge. IP was obtained but NAT rule pointing to 'WAN' interface list did not work ...
by nexusds
Mon May 25, 2020 9:47 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Has anyone confirmed if cooling the device more helps and/or if the fans are installed the wrong way and/or the CPU heat sink is poorly mounted? just wondering if software vs hardware fix is needed. never opened up the chassis, but maybe part of the controllers for ports 1-8 are close to the CPU and...
by nexusds
Mon May 25, 2020 9:26 pm
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122611

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Is this problem present only on the PoE version?
same issue on non-poe version
by nexusds
Mon Mar 30, 2020 6:05 pm
Forum: General
Topic: SIP attacks and whitelist
Replies: 2
Views: 2790

Re: SIP attacks and whitelist

Change the add SIP Trial to exclude the SIP Hackers as you dont need to keep adding them to Trial if they are already in the Hacker List
by nexusds
Wed Mar 25, 2020 5:43 am
Forum: General
Topic: Feature Request: IPv6 NAT support
Replies: 19
Views: 11848

Re: Feature Request: IPv6 NAT support

+1
multi homed system needs to be able to retain one physical IPv6 address and NAT to a backup system for clients
by nexusds
Fri Jan 17, 2020 7:11 pm
Forum: Announcements
Topic: v6.46.2 [stable] is released!
Replies: 120
Views: 62841

Re: v6.46.2 [stable] is released!

anyone else notice Tile units CPU temperature go much higher after this update?

NVM - was a coincidence with a maintenance on environments
by nexusds
Thu Sep 26, 2019 7:03 am
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 101073

Re: RouterOS v7.0beta1 (ARM)

Downgrading is a bit off.. seems I had to select stable, then manually upload filename as it could not download properly from depository. The filename didnt match what it wanted to download, so I renamed my local copy from web and then manually copied, overwriting the partial download on the mikroti...
by nexusds
Thu Sep 26, 2019 7:01 am
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 101073

Re: RouterOS v7.0beta1 (ARM)

Bonding, at least with EoIP (utilizing PPPoE links) seems wonky.. some PPPoE clients dont have any upload traffic
by nexusds
Thu Sep 05, 2019 5:02 pm
Forum: General
Topic: DHCPv6 issue after upgrade to 6.45.1
Replies: 2
Views: 1408

Re: DHCPv6 issue after upgrade to 6.45.1

PS - Still not resolved in testing 6.45.5
by nexusds
Thu Sep 05, 2019 5:01 pm
Forum: General
Topic: DHCPv6 issue after upgrade to 6.45.1
Replies: 2
Views: 1408

Re: DHCPv6 issue after upgrade to 6.45.1

Apparently we may have narrowed this down to the PPPoE server not sending a proper IPv6 gateway option to the client router. not sure how to resolve this other than use a previous ROS version.
by nexusds
Fri Aug 16, 2019 7:10 am
Forum: General
Topic: DHCPv6 issue after upgrade to 6.45.1
Replies: 2
Views: 1408

DHCPv6 issue after upgrade to 6.45.1

using Mikrotik as LNS, DHCPv6 is no longer binding to the PPPoE interfaces. anyone else see this issue or know if its been resolved (or what is causing it as I only see a few entries that I dont think are related) per 6.45.1 release notes; *) dhcpv6-server - added additional RADIUS parameters for Pr...