MikroTik

jack2020

Thanks for the idea.

jack2020

Thanks for the idea. It would be possible to use it without the router functionality. But it would be interesting if it was just a network switch

jack2020

Thanks for your answer, but I'm, talking about to use one RB5009 and another switch, that can fit in the same bracket.

jack2020

Good morning:
I am currently using a RB5009 with the rack in a cabinet, I know it is possible to accommodate up to 4 of these routers together, but my question is, since I only need one router, is there a switch model that Miktotik makes to use instead?.

Thanks with any help

jack2020

Thanks for the idea. I will try that option.

jack2020

Good morning: I currently have two ISPs set up on my Mikrotik. Both providers give me a dynamic public IP. I have IP Cloud enabled so that it updates my IP when it changes. But with IP Cloud, only the IP of a single ISP that is connected on the eth1 port is updated. How can I capture the IP change o...

jack2020

I modified one of the Bridge with a different priority and activate RSTP. And now is working fine. Thanks with the help.

jack2020

Yes you are correct about the EOIP for each router.

jack2020

I make the connections through EOIP to be able to access an HDHomerun box that I have in R2 and that through Wireguard the traffic does not pass. I could use Plex for that where the HDHomerun box is but I'm testing to see how the network behaves. First I create the tunnel through Wireguard and then ...

jack2020

Network.png Good morning: I have the following setup, 4 routers in different locations. (R1,R2,R3,R4). All connections between routers are made via Wireguard and EOIP within Wireguard. R1 and R2 do not have a public IP since the provider does double nating, for this reason I use Wireguard. Currentl...

jack2020

Good afternoon,
I was trying to use this script on my router with version 7.7 and it doesn't work. Does nothing.
Will it work in this version?
Thanks for any help.

jack2020

Thanks for the info. When I contacted Mikrotik support, they told me that the only way to update the firmware is with a USB adapter. Since this modem is installed on a LHG R antenna, it becomes more difficult to remove it and then upgrade it. In any case, this is the version that the modem has. Mode...

jack2020

Good afternoon: Maybe someone in the forum can help me with this problem. I am currently using this type of modem with a SIM card from a T-Mobile reseller. I don't know if the problem is the cell plan or if the provider has to make some kind of change. The APN is working correctly since I have an in...

jack2020

Thanks for all the information, now I have one VPN using a specific route, the way I was looking for. Thanks

jack2020

Thanks for the good explanation. I'll will tried to implement it that way.

jack2020

Thank you for the answer. Actually I have 3 routes in the Mikrotik client. The main route is by cable modem, route 2 is by antenna (WISP) and route 3 is by LTE with a plan of 1GB per month. The idea of being able to specify that one of the VPN (L2TP with IPSEC) connections go through route 3 is in a...

jack2020

Good afternoon I would like to know if this is possible. It turns out that I have two Mikrotik one (Client) and the other (Server). In the Mikrotik client I have two connections (ISP) to the internet Route 1 and Route 2. The Mikrotik client communicates through VPN (Client) always using route 1. I w...

jack2020

Thanks for your time and idea. I will try it.

jack2020

Thanks for the ideas. Sorry I'm a little busy. This is my basic configuration, I modified some names and ip to hide my real Public IP and domain name. Is practically the same settings from the presentation. The Main Mikrotik LAN Range is 192.168.88.0/24 and the remote Mikrotik LAN Range is 10.5.149....

jack2020

I already fix the problem. But I have another one now. This IPSEC VPN is with policy only not routing. Now I have an IP Address list that I want to send through the Tunnel from the server side to the client. I was searching the internet and many of the examples are from the Client to the server. I a...

jack2020

Hello everybody in the forum. I have recently followed this tutorial https://mum.mikrotik.com/presentations/ID19/presentation_7168_1572420263.pdf to create a vpn server using IPSec with Ike2. When I finish doing the configuration, the router (Client) connects to the Router (Server) and I can ping fr...

jack2020

Thanks for all your help. Today I received the RB4011 and everything works as expected, at the first try.

jack2020

Thanks for all the help received. Just waiting for the other router to arrive, I hope that by putting everything as indicated in the instructions, it will work on the first attempt and nothing special in my area.

jack2020

After all I returned it and bought an RB4011. Wish everything works fine when I receive the new model.

jack2020

No Switch option this is my menu

jack2020

Thanks for the update. Need to find the equivalent of that command, if not I'm going to return this router.

jack2020

Just for info I have at&t fiber 300MB with Directv plan. I have no idea if they manage that account different. For my Certificates I used the mfg_dat_decode utility for linux and for windows. Same result My first at&t modem was a Pace and then I change it for a Motorola NVG589 the one that I...

jack2020

- The certificate imported has the KT flags. - I imported the first 3 certificates and then I finished with 6 certificates under certificates, including the Client with the KT flag. - on my dot1x I tried both, with colon and without it. Same result. - When I tried without the Bridge I use only one i...

jack2020

This one with the Bridge.

jack2020

Here is with the info requested. This one is without the Bridge. I see no activity for the authentication only EAPOL start and failure.

jack2020

Here is my configuration with my modification. This one is without the WAN Bridge, the first screenshot was with the WAN Bridge. I removed the real MAC address for this post. My first interface is combo1, then I have ether1....ether7 The RouterOS is 6.46.1 /system identity set name=Mikrotik # Create...

jack2020

I tried the bridge_ont option and for some reason my authorization fails, I think something is wrong with this certificate. On lines 14,18,21 the system ask for my real ip address? I include my wireshark image. Thanks with any idea. I also tried the configuration without the bridge and I have no req...

jack2020

jack2020

Hi, I followed the last instruction and keep the same message "Authorized without server". Maybe my area have another kind of configuration or the Mikrotik RB4011iGS+ works different than my CCR1009-7G-1C(tile). Something curious is if I change my mac address in the Dotx using both format ...

jack2020

OK, eth1 is alone without any WAN_Bridge. And no WAN_Bridge. I'm going to try the Dotx Script. Thanks

jack2020

I remove the WAN Bridge, ether1 is alone, the only bridge that I have is for the LAN. Do I need to remove the LAN_Bridge and create a new one for the LAN?

jack2020

I change the clock with right date and time, import the certificates again, use the one with KT with the DOTx . And the same message. Thanks

jack2020

This is part of my config without the Dotx1 check. I imported the 3 certificates (CA_00..., Client_00.., PrivateKey_PKCS1_00..) that was created when using the utility for create the wpa_supplicant.conf interface ethernet set [ find default-name=ether1 ] mac-address=xx:xx:xx:xx:xx:xx set [ find defa...

jack2020

Sadly with the new Mikrotik CCR1009 I'm still have the same message "Authenticaded without server" and no IP address. I also tried the script to verify the Dot1x status and no luck. Looking for any help. Thanks

jack2020

I have a residential account, I'm going to try with the new Mikrotik when it arrive. Right now I'm using my old one for this test. Like you told me before under powered maybe is the router because is the model crs109-8G. The new one is the CCR1009. Thanks

jack2020

Hi, thanks for this tutorial, and the hard work. I tried this new method with my router, I'm waiting for the new one, I think I got authorization but for some reason I never have an ip address. The message that I received under the dot1.x is authenticated without server . Any idea. Thanks

jack2020

Thanks for the info, I need to buy a new one. Any progress with the wpa_supplicant to remove completely the use of the at&t modem?

jack2020

Hi, to all in the forum. I have the Mikrotik CRS109-8G-1S-2hNd, with at&t fiber. The script works perfectly with at&t fiber and I received the IP address from the provider the IPV4 and IPV6. But I have one problem with my connection, my Internet is 300MB, but when I make a speed test I only ...

Search found 43 matches