I upgraded to this new team recently and I'm not happy with it Immediately solve ---- >>> switch chip (or make current one functional)

It is a half or interrupted orgasm

I could not connect via USB2UART adapter. I believe I also need to power up module via SFP pins. Later I will try one more shot. sn and mac was written on /proc/ubnthal folder /etc/init.d/rcS has following codes Any comment if I change following code with manual one to remove /proc/ubnthal ingredie...

ONU state: Operation State (O5) You can read here what it means here, it is produced by many variables Forum Huawei... https://forum.huawei.com/carrier/en/thread-446043-1-1.html Document how to work https://www.mdpi.com/2076-3417/8/10/1934/pdf Maybe it is better to change the firmware for one that w...

Could you please provide the code that I can check the state of PON? I could not find it even I search diag command. Thanks. Hi all, I have UF Instant and I would like to use it instead of Ericsson T063G ONT I accessed T063G via usb-serial converter and took following parameters 00-T06xG-gpon: st P...

For anyone having trouble setting up DFP-34X-2C2 / DFP-34G-2C2 with Movistar's 10 bytes hexadecimal GPON password (aka idONT, `f20XXXXXXXXXXX000000`), I did some reverse engineering and wrote a tool to do that: https://github.com/zry98/DFP-34X-2C2 Update: After communicating with the developer from...

Someone has the stick -->> Ubiquiti - U-Fiber Instan

Someone can put some pictures of the real interior , the motherboard and internal specifications


Very grateful.

Here is Carlitos' stick. GPON ONU SFP (CPGOS03-0490 v2.0) I recommend it, get in touch with CarlitoxxPro. Good quality. Petronas, what user ID and password are you using? I can get the webpage to load on 192.168.1.1 or use telnet but cpAdmin/cpAdmin or cpUser/cpUser is not accepted. I'd like to be ...

Here, drop this !!!

Memory processor photos and others Realtek RTL 9601

Hi Petronas

Can you share more about Realtek RTL9601C.

What does it display?
cat /proc/cpuinfo

cat /proc/mtd

Hello. :D Here is Carlitos' stick. GPON ONU SFP (CPGOS03-0490 v2.0) Memory processor photos and others Realtek RTL 9601 - Winbond 25Q64JVIQ Many values can be modified via WebUI and Telnet You can also change the serial number of the stick by Telnet Very stable, The only annotation I see is the warm...

It seems from his images this user does not have "administrator privileges".

run cd /
run uci show

use the help commands

can you upload?  to pastebin.com

I can resurrect the stick in failure, full backup *** The party starts taking a seat and popcorn watching the show. :lol: ** That's exactly what I need. Where did you get "mod tweezers" ? Sorry delay.... all this took a while It is a creation made by me. Use the normal clamp and place som...

How did you manage to re-flash it with zisa firmware and transfer goi_config from your G-010S-P Link for image1 partition dump and u-boot env variables: https://www.dropbox.com/s/v1sxo2js25t0csv/zisa_fw_for_g-010s-p.7z?dl=1 You can explain something better like you do. :?: :?: how to transfer the i...

Reupload file inside pw Hi Petronas, Thank you for sharing the login pass. I locked myself out for a day :lol: I agree with you, this image version is limited, no http. We need an image from Hilink HL23446 or Carlitoxx CPGOS03-0490 to have many configuration options. Maybe someone will post it. It ...

Here is my backup file 8) Hi Petronas, Thank you for posting flash images. Do you mind sharing ssh password @192.168.1.10 for this image? mtd3.bin(rootfs) and mtd4.bin(rootfs_data) may contain running system info. mtd1.bin may contain serial info. These commands should be used to erase it before ru...

DFP-34G-2C2 DFP-34G-2C2 default telnet password for DFP-34G-2C2, Hi MikroUser, fushigi, AntonioLON, DeVlL If it is not too inconvenient for you, please provide software images for HL23446 and DFP-34G-2C2. In the past I have successfully reflashed images between different brands. As long they have s...

Someone can put pictures of their optical stick here ?

Thanks

I disassemble the stick. :shock: :roll: SOURCEPHOTONICS SPS3424THPTDFO So that we can all identify the different Chinese teams and clones . https://i.ibb.co/M7XnC3X/5.jpg https://i.ibb.co/bRH3gz7/10.jpg Here are more pictures 8) Enjoy the show :roll: https://mega.nz/#!AUYQWYAY!qIu1il8-umT68sUNAnaxVs...

I have another problem seems not to be well registered. Verify if the u-boot environment variable 'target' is set ## Error: "Target" not defined https://i.ibb.co/BjpgnZg/fw-printenv-target.jpg :?: look file cat /etc/init.d/sys.sh to be empty :?: Change mouth input sfp1 does not work https:...

I do not understand very well the string to be introduced is more than 10 characters but my record is more. although I change it for HEX data. https://i.ibb.co/PZxbWD3/11.jpg Thank you for the last picture. HG8240 has already converted values to hex. Examples with fake numbers. 00f201200048 -->> se...

What path are the files on? files gpon sys onu.sh ?? onu.sh and sys.sh are in /etc/init.d gpon in /etc/config root@SFP:/# cat /etc/init.d/sys.sh One variable inside of fw_printenv on the pastebin site has some private info, I recommend to remove it. Maybe http daemon is on port 8080 or 8000 root@SF...

I write these commands and write correctly, then I check and they have not been written Without an actual unit in my hand I'm out of ideas. You may wish to dump and examine results of uci show and fw_printenv . List directories /etc/config and /etc/init.d Examine closely files gpon sys onu.sh for e...

I managed to burn the integrated with the "sfp_i2c" commands shown above Antonio's commands make more sense to me. He's on 14.07_ltq. I am on 12.09_ltq ** remove 12.09 variables ** fw_setenv nPassword fw_setenv nSerial ** use 14.07 (Antonio post #210) ** fw_setenv ont_serial HWTN12345678 ...

I have the dpoptics model and it doesn't work, :( comment on my experience Buy at " DPOPTICS D23446 STHE " company, and sendme " SOURCEPHOTONICS SPS3424THPTDFO " . Oh my god !! :? I look inside stick and are from third-party manufacturers, look pictures :oops: In this equipment ...

I have the dpoptics model and it doesn't work, :( comment on my experience Buy at " DPOPTICS D23446-STHE " company, and sendme " SOURCEPHOTONICS SPS3424THPTDFO " . Oh my god !! :? I look inside stick and are from third-party manufacturers, look pictures :oops: In this equipment ...

I have the dpoptics model and it doesn't work, :( comment on my experience Buy at " DPOPTICS D23446 STHE " company, and sendme " SOURCEPHOTONICS SPS3424THPTDFO " . Oh my god !! :? I look inside stick and are from third-party manufacturers, look pictures :oops: In this equipment t...