MikroTik

intensex

It's true,I have test two WiFi card work at once on RBM33G at July 2019, and the
Cards can work on caps mode

intensex

I has test the "LTAP MINI" mini-pcie`s 3.3v power pin,if use 5V usb in,the 3.3V pin was about 1.8V to 2.9V and not stable,if power in DC,the power pin was 3.3V and stable;but the "LTAP MINI LTE" KIT mini-pcie have stable 3.3V when usb power in

intensex

I'm sure the AC adapter support 5v2a and the cable was quality good.

intensex

Me too,and if USB 5v power in, Will have a noise from the router board near GPS module

intensex

If use USB 5v power in , the LTE will be disappeared, and noise sound from the router board near the GPS module, it's normal? DC and POE in don't have this problem

intensex

This is offtopic with band. This is easy as reason why to lock into band. If you not live in city then you have some distance to tower. Slow quality of signal like 0/5 or 1/5 from progress bar. In this situation you discover that 800/900 band is slower but works better at distance like in my scenar...

intensex

Quectel_EC20_AT_Commands_Manual
and manual at-chat
4.3.6. AT+QCFG="band" Band Configuration
6.9. AT+QNWINFO Query Network Information

Just say.

thanks，the band change usually was automatically, why do you need manual change/lock the band ?

intensex

I found the YT clip with show the full settings with band. Mikrotik SXT LTE v2 Dual SIM & Band Select

the lte module in video is “r11e lte“，it's made by mikrotik, so can support the band select function, many other brand can't support

intensex

It`s don`t change sim-slot in madness frequency,the script was execute by Scheduler，usually set the Scheduler execute the script more the 90 seconds My LTE change his RSRP in small range and if you have the same, then this 90 second is good. How often is sim changed? Few hour, Few days ? “How often...

intensex

Your current version is easy to analyze. Work just after rsrp|rssi goes to wrong value. Current script works perfect OR change SIM-Slot in madness frequency ? It`s don`t change sim-slot in madness frequency,the script was execute by Scheduler，usually set the Scheduler execute the script more the 90 ...

intensex

I have a idea for the sim switch,get the gps speed info,if the speed <1km/h,mean the router was in floor/basement or tunnel ,don`t need switch the sim,so it`s to disable the sim switch script Scheduler，when the speed>1.5km/h，enable the Scheduler

intensex

{ # Setup and read current values, "up" SIM slot will be used for UNICOM, "down" for CM :global simSlot [/system routerboard modem get sim-slot] :global timeoutLTE 60 :global timeoutConnect 60 # Wait for LTE to initialize for maximum "timeoutLTE" seconds :local i 0 :lo...

intensex

"When rsrp or rssi are very bad then change active sim-slot?" For this,in my local, the ISP says the rsrp <105dBm was bad, for test easy, I set it's like that;and in car use, not usually to execute the script to switch the sim, because switch sim need more than 30 seconds and maybe the rsr...

intensex

I will post the script which my modified tomorrow, but I don't know which is better between your script and my modified.
By the way,do you know APRS? I have a idea , send the /system/GPS info to the APRS network

intensex

by the way,the script from "https://wiki.mikrotik.com/wiki/Dual_SIM_Application"was working on my LTAP when I change something,Thanks for your help! Wiki script not check rsrp and have other purpose. Main JOB is to switch sim-slot when the ($InfoRsrp >= -103) is true. Release Candidate ve...

intensex

ok, I understand this but I not use the LED property, never. For me it's not any usage in it. This is common part in scripting for you and for @krafg . Currenty I work now in my main job. Additional try help with your and @krafg sctipts. About the ltap1.rsc is like 85% progress. Just few stuff. You...

intensex

Many routerboard don`t have the LED1,LED2.....etc,if the routerboard have this LEDS,it`s can work and don`t need script like LTAP

ltap.PNG

intensex

check this, only display in terminal, the /led settings are from other post: { local RsrpLte1 ([/interface lte info lte1 once as-value]->"rsrp"); put $RsrpLte1; # Now it is "-87" without dBm word :if ($RsrpLte1 >= -80) do={ #/system leds set 1 leds=led1,led2,led3,led4,led5 type=...

intensex

Perfect, VERY THANKS, TEXT FORM is the best to me. I can just copy-paste. Next post should be with a beta-script who will be to testing. Please, copy to CLI this script=code from https://forum.mikrotik.com/viewtopic.php?f=9&t=151036#p747253 and check yourself the LED and printing. Picture: Scre...

intensex

I write you before in 1st answer that I use USB LTE but not as modem but as router and I HAVENT GOT the INFO property!. Screenshot_4.jpg GIVE ME THIS RESULTS: put [/interface lte info lte1 once as-value] put ([/interface lte info lte1 once as-value]->"rsrp") I must give you instruction ho...

intensex

Base on https://image.prntscr.com/image/vSp_d79nQlORTVJWr-wz8g.png because I cannot do it at my RB ROS: Screenshot_1.jpg try do and print the same results like upper example all prints you have (I don't do it bcs I not have this hardware ! and I not have a remote access to your PC to check all diag...

intensex

It was successded,because the "/interface lte info [find name="lte1"] once as-value",the info don`t have dBm after rsrp number,If use "$isRsrp<-105dBm",the script can`t switch the sim,change the "$isRsrp<-105dBm" to "$isRsrp<-105",the script will be ...

intensex

Next, I read https://wiki.mikrotik.com/wiki/Manual:Interface/LTE and https://wiki.mikrotik.com/wiki/Dual_SIM_Application On some LTE MikroTik devices can be set specific LTE Band via AT command. This is important because you can select this who have a best speed in your region. put [/interface lte ...

intensex

For many test，i think the script " :local Info [/interface lte info [find name="lte1"] once as-value] :local isRoaming ($Info->"roaming") # Check which SIM slot is used :if ($simSlot="down") do={ # If "down" (home) slot, check roaming status :if ($isRoami...

intensex

# ? You must correct this: /local rsrp-lte1 [/interface lte get lte1 rsrp]; ? You found a proper CLI to display via put the rsrp value ? Thanks，however use the rssi or rsrp,the script can't switch the Sim. This was example, not solution. You must do checking because I have not any MikroTik LTE devi...

intensex

For old Ros version, the "modem" was "sim", so in this URL,it was /system routerboard Sim . You write about CLI. The url in wiki not have article who describe a property of parameters in /system routerboard modem. Simply scheduler not good, I means if the rssi/rsrp was Good, not...

intensex

I ask because the in https://wiki.mikrotik.com/wiki/Manual:TOC I cannot found description of this options in /system routerboard modem In this https://wiki.mikrotik.com/wiki/Dual_SIM_Application For old Ros version, the "modem" was "sim", so in this URL,it was /system routerboar...

intensex

some of new LTE MikroTik devices have even 3x SIM and only one can be active - not good. How often you will be run this scheduler, every 1, 2, 3, 5 minutes interval? Please confirm that /system routerboard modem set sim-slot=up <- this activate sim1 and deactivate sim2 /system routerboard modem set...

intensex

Dual sim means the LTE have two Sim slot, but only one can active at same time.

intensex

If this is not DualSIM but SIM1 or SIM2 then in how way you select the active one? You cannot check the rsrp/rssi etc from non-used one? In the script have script to active the one sim like" /system……up or down", and don't need check the non-used one's rsrp/rssi when the sim was non-used,...

intensex

But, please, use RSRP for indication of signal strength ... RSSI includes also all the interference.

Thanks，however use the rssi or rsrp,the script can't switch the
Sim.

intensex

Next, I read https://wiki.mikrotik.com/wiki/Manual:Interface/LTE and https://wiki.mikrotik.com/wiki/Dual_SIM_Application On some LTE MikroTik devices can be set specific LTE Band via AT command. This is important because you can select this who have a best speed in your region. put [/interface lte ...

intensex

[admin@MikroTik] > /interface lte info [find name="lte1"] once pin-status: ok registration-status: registered functionality: full manufacturer: Quectel model: EC20F revision: EC20CEFAGR06A10M4G current-operator: MOBILE lac: 9902 current-cellid: 177000798 enb-id: 693600 sector-id: 22 access...

intensex

It's hard, I check all your script to find your idea to solve problem. You not have any part of script to grab RSSI. If you provide proper some "/... print detailed" or with as-value print then I can understand what parameter lookup and give you a hint. For now I must say thay I haven't a...

intensex

Hello everyone! My LTAP ROS version was 6.45.3,and in my local the ISP don`t support Roaming,So i need switch the SIM when the RSSI was weakness(for example,the UP sim was online.if the RSSI <91dbm,run the script to switch the SIM to DOWM sim) ,how to modify the Dual SIM script to work at this mode?...

Search found 35 matches

Re: RBM33G with two WifiCards

Re: ltap mini can't use 5v power in

Re: ltap mini can't use 5v power in

Re: ltap mini usb power LTE interface off

ltap mini can't use 5v power in

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

Re: The LTAP can switch the Dual SIM when the RSSI was weakness?

The LTAP can switch the Dual SIM when the RSSI was weakness?