MikroTik

ahmedramze

Were you under the impression that this is encrypted? Then how would it be magically decrypted? RouterOS has no "authentication by hash" features or API auth keys. Of course it's the administrators tool, so do not give access to this tool to anyone who is not administrator. Windows has ap...

ahmedramze

The allowed interfaces for MAC-level access can depend on the model of the router, and possibly on the software it first came with. However, usually it is enabled on all ports and when it is not, it is because you changed that yourself before. Yes but firewalls drop every thinks from WAN which its ...

ahmedramze

Hello Mikrotik. please allow the Mac-Telnet from WAN ether1 on default configuration we have very big problem when we reseting factory or installing new router all any access to router from ether1 disabled. we tired from using ether2 or any other interface to first time login. and some routers insta...

ahmedramze

Hello All. Since Mikrotik removed Winbox from Dude packages , and add the command in tools menu and copy file into dude folder. by mistake the Winbox.exe name was Winbox64.exe and I found big surprise. YOU CAN SHOW ADMIN OR ANY USER PASSWORD STORED IN DUDE. just add any wrong command using tools wit...

ahmedramze

Hello. below setting for pornography block and adds also way to using the DOH Dns over HTTPs. this for beginner how to , 1- you need to use only Mikrotik DNS , and block all access to any DNS request if clients change them DNS. the input interface its ether1 and local network 192.168.88.0/24 for thi...

ahmedramze

What bonding mode are you trying to use?

I tried active backup and balance rr.

Also do the microwaves all have same latency?
yes just bandwidth different. and I have some time drops on links.

ahmedramze

you can connect any USB-RS232 and use it as console in /system ports if you have USB-HUB also you can connect many USBs devices and configure it as you like we was use it for UPS and GSM devices etc. also there is Quad/Octa Serial ports you can connected it Router OS almost support all serial chips ...

ahmedramze

Hello Mikrotikers. I have three unstable Microwave links 1st one 100-200Mb 2nd 300-400Mb and main one 700Mb. all are connected to CCR 1009 on both side as ether1,2,3 I don't have big experience in bonding monitoring over three links I added local IP on bonding interface changing monitoring time but ...

ahmedramze

Hi blocking youtube will cos issues in some google services such as app/gmail/etc. they use same IPs and domains for google global cache and if you block it it will move your ip into next GGC node. but you can burst queue for video like 2kbps for 5-10sec which make video in downloads loop. google/Me...

ahmedramze

ah done I think I need to renew my mikrotik certificate very old

acc2.png

ahmedramze

Hi
Can add comment on view list of columns ? its easy to view/edit/sort by comment some time need it specially in ip firewall address list

access.png

ahmedramze

Hi I want to write post but I found this usefully and we can add some points to Dude servers. as IT and network admin our requirement its monitoring all network device in the network public/private before/after NAT. currently with dude its limited on IPs are connected via Dude Server and required so...

ahmedramze

what u getting on the winbox wrong username or password ? I tried normally to open winbox for the CCR1009 like daily , all password are saved , login wrong , login wrong , I tried to check web graphics I open web page i see it open directly to web interface admin no password I reboot the router all...

ahmedramze

Hi Guys I have something wrong I cant login to mikrotik or dude server all users and password error , I tried to check web interface i logged in admin directly to webcfg. i tried to use admin with out password , its login i checked system users - only admin no other users system certificate all empt...

ahmedramze

Hi Did you solve it ? Sol-1 its better to have a new LAN interface for the server even USB-WIFI connected to LAN2 this way each networks are separated and use different routers with same server. Sol-2 use two different routers and connect both via for example ether2 , and just add route rule on rout...

ahmedramze

Hello Mikrotiks I think its security bug to be able to see user password on BW test client , and also for Dude add action if , I added wrong action its show the password and must be all hiden. the Hide password Menu its for AAA ok but for administration users its difficult. also MD5 password must be...

ahmedramze

Hello

Please can upload All packages as separated files then we can use fetch command also , add Https mikrotik certificate for url download.mikrotik.com
installing packages required unzip the file and upload it agian some sites time we use mobile network and slow connection.

Regards.

ahmedramze

Dears

I checked X86 and Serial port on Mikrotik local login, if admin or any user login still logged in , and any one can use the session to add user or change password or do what he need to do.

is there is idea to add logout timer , its need to write exit every time we logged in locally.

Refards

ahmedramze

Hello.

its nice if mikrotik to modify the Device add rule on Kid Control to automatically add the new or any device in specific Kids profile , for example any device connected will be assign with default kid profile and we will re assign the profile manually to how accepted.

ahmedramze

Hello

to disable DNS attacking
please add listen address on better from use ip firewall filters

/ip dns allow-remote-requist=yes
/ip dns listen-src-address=192.168.88.0/24,x.xx,y.y.y

Regards

ahmedramze

Hello I'm try to run more than one Ubuntu desktop i386 release 16LTS with img disk of 20G , I can run only one at time I can't both together while I can run 8 Mikrotik ROS at one time the erorr its kernel extract faild also its possible to have 64 bit operating system on KVM x86 [img] kvm.PNG [/img]

ahmedramze

Hello

Please Can Add service name on PPP active to be able to sort users according to the port or re-sellers

sermik.PNG

ahmedramze

Hello

New challenge on Mikrotik Rb750UP , outdoor box temperature 77

750-1.PNG

750.PNG

ahmedramze

For public ip sure need BGP and Routed IP over ASN but if he want to use the 20 Public as a private IP when internet down , internal access to internet , just add the IP route commands and make sure on IP firewall tracking putted on AUTO , and on NAT add action=masquerade on out-interface=ISP2 only....

ahmedramze

Hello I have 20 streamers on IPTV application , when I use RB260GS all streams are ok and video fine. Just when connect CRS125-24G-1S and replace the RB260GS , I got some pixelate on the picture , when I switch it back into 260GS work fine. I tried on CRS125 disable the firewall and 1-Bride all inte...

ahmedramze

Your request its not on BGP juts need add ping check on gateway on IP route. /ip route add check-gateway=ping distance=1 gateway=1.1.1.1 add check-gateway=ping distance=2 gateway=2.2.2.2 when ping down on 1.1.1.1 will automatic route into 2nd distance and you can add 3rd 4th etc. also if you can add...

ahmedramze

Php its different from HTML. the code in PHP are execute on server then send the result as HTML to your web browser. HTML are execute in your Browser. so The PHP its server side ,PHP is a programming language, it usually handles business logic with conditionals, loops, arrays and objects. the HTML i...

ahmedramze

I have 50 Encoder HDMI to IP , the LAN 10/100 not 1G , if I put all in one switch its make 100Mb and overloaded the 10/100 LAN. I solve it with IGMP proxy , using CRS125-24G-15-RM , ether 24- ether3 master port ether2 , and ether1 output to other encoder (output here 40Mb) the encoder networks 192.1...

ahmedramze

Hello

Did you solve it , or no ?

i think you need to add -m eth0 for your command to specific the multicast interface with out -m will use the lo interface.

I have now problem in installation for Raspberry B+ for updxy

Regards

ahmedramze

Hello

please can you add X or clear the IP box while we click on IP of SRC or DST instate of writing 0.0.0.0/0

WINBOX.PNG

ahmedramze

its run with SWOS , not RouterOS , i change all cisco , linksys switch into mikotik , in case of failure we can MAC-Telnet , this is no Router in world can support it ,,, THANKS MIKROTIK

ahmedramze

hello

any idea to change Ethernet chip into Giga for 750UP , problem with new NetMetal we have link 150Mb but limited into 100 according to POE of 750UP.

please Mikrotik need this urgent

Regards.

ahmedramze

Dears I need help how can I enable unauthorized user to login even its not exist in SECRET or billing or radius , I need to accept the pppoe session and give him an separated IP POOL to give him instruction to fill his account , I not need for expire users , I Have it , but i need for unauthorized u...

ahmedramze

Hello I have Multicast IPs on One Bridge ether1 and ether3 and ether2, 244.X.X.X.X the original stream , and 239.X.X.X the transcoded stream , the out put in same bridge ether2 , I need to block 244 from ether2. my problem because the transcoder use same Ethernet as IP in and IP out I need to block ...

ahmedramze

Hello

I need any copy of CF card can work on RB230 I found on this forum

http://forum.mikrotik.com/viewtopic.php ... nux#p36568
http://www.routerboard.com/files/rb500-128.img.zip

but its not work.

I have 4G CF Card.

Regards

ahmedramze

Hello I have Netwatch to all my subnet , 255 IP , but router board 1200 CPU up to 100% on system profile Networking got 100% what is mean by networking ? too profile NAME CPU USAGE ppp all 0.5% ppp-mppe all 0.5% ethernet all 1.5% console all 0.5% graphing all 0% dns all 6.5% firewall all 15.5% netwo...

ahmedramze

Hello

Is there is pinout for LCD for
GV018-16009B-GB

I'm try to interface this LCD into RB800 & 433 to do LCD signal viewer , during installation
user manual , Guide , website etc.

Ahmed.

ahmedramze

Hello , I have issue with queue simple and tree , we use this script for unlimited download from cache proxy , for TOS marking in mangle , /ip firewall mangle add action=mark-packet chain=postrouting comment=SQUID disabled=no dscp=12 new-packet-mark=squid passthrough=no /queue tree add burst-limit=0...

ahmedramze

Hello herot and thanks for karma first your script its to monitor the ethernet status (( cable ok or not )) not test the all network from your point till google 8.8.8.8 2nd you did big mistake by add 8.8.8.8 as a gateway you can not use 8.8.8.8 as a private network. you need to remove all these /ip ...

ahmedramze

I did not understand your script try with /ip route export. for your image its too easy to config , first do the WANs faillers then 2nd do the VRRP. For WANs faillers assuming 1.1.1.1 ISP1 and 2.2.2.1 ISP3 and 3.3.3.1 ISP3 /ip route add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=1.1.1.1 sc...

ahmedramze

no its check the ping into 8.8.8.8 throught WAN1 if its less than 500ms will switch the IP ROUTE back into WAN1 ISP , if its still down , the script will use ISP2 as gateway , if you talk about LOG (( there is too many IP Route changed by admin)) its will be too many and you can disable it from syst...

ahmedramze

You looking for Failover not for load balance. No need to these scripts just need to monitor the ISP with DNS and change route according to failures WAN only 7 lines. WAN1 192.168.1.2/24 with gateway 192.168.1.1 ISP1 WAN2 192.168.2.2/24 with gateway 192.168.2.1 ISP2 /ip address add address=192.168.1...

ahmedramze

Hello,

attached all file type accepted by web proxy cache.

its more than 3000 file , below example of monitoring of file type

ahmedramze

You looking for Failover not for load balance. No need to these scripts just need to monitor the ISP with DNS and change route according to failures WAN only 7 lines. WAN1 192.168.1.2/24 with gateway 192.168.1.1 ISP1 WAN2 192.168.2.2/24 with gateway 192.168.2.1 ISP2 /ip address add address=192.168.1...

ahmedramze

Hello. I did small script using Netwatch to change DNS if have time out or larg time. My issue its when 2 or more DNS down at same time the other script will add the 2nd dns which its also down. is there is any way to add or remove only one DNS from IP DNS menu on scripting ? My script Netwatch to a...

ahmedramze

Better to switch to L7 application protocol.

its work like proxy setting

/ip firewall layer7-protocol
add name=rdp regexp="rdpdr.*cliprdr.*rdpsnd"

you can use wildcard like * & $ etc. to define your rule.

ahmedramze

Its better to use IP firewall , Juts from command line get ips for google & yahoo from your ISP. nslookup yahoo.com nslookup google.com yahoo 206.190.36.45 98.139.183.24 98.138.253.109 google 173.194.44.233 173.194.44.230 173.194.44.227 173.194.44.228 173.194.44.224 173.194.44.229 173.194.44.225...

ahmedramze

you can mount a metarouter with openwrt in your rb. Hello, There is better solution by custom design webfig. But I'm talking about different request , to change or edit or customization html directory and assign different port or directory for webfig. for example / root directory can we add for ex....

ahmedramze

Hello its better to put a directory (ex. HTML like hotspot Dir.) for httpd Server to use it in API Pages. so we can able to design or implement Client web interface they can access not (webfig). For example. I want to build php or HTML script to show user info,billing,signal strength etc. with our l...

ahmedramze

May be this helpful ?

http://wiki.mikrotik.com/wiki/Manual:BG ... interfaces

ahmedramze

Yes already I changing the radio name , but better know the Router ID.

ahmedramze

Dears

it's not impossible to add Router identity to wireless registration table we have too many info but there is no router name.

this will be helpful to tracking the users.

reg.JPG

Regards.

ahmedramze

Hello

I have prob. with RB600A after upgrade

log pr
jan/01/1970 03:00:06 system,error,critical System rebooted because of kernel failure
jan/02/1970 03:00:06 system,error,critical router was rebooted without proper shutdown (cause 1)

current-firmware: 2.27

Thanks

ahmedramze

Dears

can we use Telecom DC power supply to supply RB1200 ? like RB800-RB600.

we have issue on power 220V but the 48V its stable.

Ahmed.

ahmedramze

this already found in WiKi

http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways

just change the Group A and Group B with pool1 and pool2 and each one for profile of any PPPOE,PPTP etc servers.

Ahmed.

ahmedramze

first you need from your ISP or your Main Router to route the IPs for example ISP 192.168.1.1 your public IPs 172.16.0.0/24 your Router 192.168.1.2 your ISP Route table mikrotik /ip router 172.16.0.0/24 gateway 192.168.1.2 or cisco ip route 172.16.0.0 255.255.255.0 192.168.1.2 then you can use the /...

ahmedramze

any answer?

ahmedramze

also from iPhone safari but its work on MAC PC safari

on iPhone the page loaded but when ask for user name and password its return ask too many times and page not open and on mikrotik log nothing there. i try with wrong username I got error message on LOG.

Thanks

ahmedramze

Perfect Web WINBOX on 5.4

5.1 was old test

Thanks

ahmedramze

if you use 3 pin serial (TX,RX,GND) cross cable with good type of STP or SFTP cable you can reach 25M , but don't use RS232-USB adapter its not reach 5M and its good idea to use RS485-RS232 converter for long distance. I'm use MOXA RS232 to Ethernet converter in most places that hard to access to mi...

ahmedramze

Hello is there is any idea to replace the DB-9 with RJ-45 connector for serial interface. for urgent maintenance like board fail, disable interfaces by wrong config etc. the RJ-45 its easy to connect it inside the box with out open the router board from the Enclosures, its also easy by install 20 Me...

ahmedramze

Setup Wizard. on first startup for new users on mikrotik to make it ease and simple. A-DHCP must be enabled on ether1 with address 192.168.88.1/24. B- on welcome screen (( First time login )) 1-Configure and select WAN interface ( IP type static DHCP PPPOE, IP Route, DNS ,time zone,NTP client etc). ...

ahmedramze

hello

IE9 & FireFox & Chrome unable to load web config still loading for long time with nothink , its issue on the explorers ?

webfig.gif

ahmedramze

Let give it name Mikrotik Status page.

test.gif

ahmedramze

Can add this ?
http://forum.mikrotik.com/viewtopic.php?f=9&t=11532

Signal can reached with out need to login like Graph.

for easy to align etc.

and please I'm still dreaming on below

graph.gif

ahmedramze

its done test.gif and code for PHP also need attached class. <?php require('routeros_api.class.php'); $API = new routeros_api(); $API->debug = false; if ($API->connect('10.10.10.253', 'admin', '')) { // Change this as necessery $ARRAY = $API->comm("/system/resource/print"); $first = $ARRAY...

ahmedramze

Hello, Just finished from configure a VOD system with OSPF running between Routers (( Server - Clients )), the LAN for client Router its configured with HOTSPOT, DHCP IP, The problem Users can see the video without authentication no password or username used while I can't ping the gateway for local ...

ahmedramze

http://wiki.mikrotik.com/wiki/Manual:Multicast_detailed_example

ahmedramze

Hello we are still waiting the other slides

http://wiki.mikrotik.com/wiki/MUM_2011_HU

ahmedramze

1. it's a printed 3D model
2. it's not gbic, it's SFP

I corect the image , Just refresh sorry

ahmedramze

this is the picture of amazing router RB2011

ahmedramze

Hello

Can I use this card (R52Hn) with one anntena for N connection ?

or its need 2 antenna or single with dual polarity.

which one the main MMCX port J4 or J5 on the Right.

and for bandwith plan what is channel width its 40Mhz like turbo ?

Thanks

ahmedramze

I have prob in some libary , prog size 400mb !!!!!!!!!!!!!! I'm new on Apple OS i need to remove many files with fail now.

ahmedramze

Hi I will finish the program that i write it from SDK of iPhone OS 3.0 and will upload it soon the current test version support:- 1- IP address, route , DHCP ,DNS. 2- Interface , Wireless , Bridge 3- Queue 4- System , Reboot , Resources and now will work on PPP and IP hotspot. any idea i can add it?

ahmedramze

i solve it by
1- I upgrade the RB600 BIOS
2- set the CPU Speed to 400Mhz not 688Mhz
3- Put the Power Direct on J1 of board and now im use 70M SFTP cable and link stable.

ahmedramze

1- Why when i use POE the ethernet switch into 10/100 not gigabit 2- For Dual NSTREME can i use 65mW for RX only or better use XR-5 or RB52H 3- what is maximum cable lenth , i have another link use same POE and cable its run over 120 meter!!! 1.- The switch isn't gigabit. It's the same use the poe ...

ahmedramze

Good day, I have RB600 on Dual Polarty Anntena V/H 32db Parabolic LMR400 Cable, im use it for point to point 2Km configuration BOX1 DUALNSTREMME WLAN1 - TX Turbo 5800Mhz WLAN2 -RX Turbo 5200Mhz 48V 1.5A POE 10 Meter SFTP cable Giga Bit switch link read 100 BOX2 DUALNSTREMME WLAN1 - TX Turbo 5200Mhz ...

ahmedramze

Hi
Sorry I not mean ADD , i was use win box for terminal you can do this

set wlan1 scan-list=3000-7000

Regards

ahmedramze

Yessssssssss

thanks , its work just i add scan list=5000-6000

ahmedramze

This is when i Select Frequincy Mode = Reg. domain. [admin@Down-Link] interface wireless> info print 0 interface-type=Atheros AR5213 chip-info="mac:0x5/0x9, phy:0x43, a5:0x36, a2:0x0, eeprom:0x4008" pci-info="00:05.0" capabilities=tx-power-control,ack-timeout-control, virtual-ap,...

ahmedramze

Hi Im use 2 Mikrotik box RB600 with 2 XR-5 600mw with distance 10Km , i have on AP router [admin@UPLINK] interface wireless registration-table> print # INTERFACE RADIO-NAME MAC-ADDRESS AP SIGNAL... TX-RATE 0 wlan1 00:15:6D:10:11:6E no -57dBm... 48Mbps [admin@DownLINK] interface wireless registration...

ahmedramze

Dears I was use REDHAD box with SQUID web Cache , I have more than 200 client connect to internet , I have quistion . which one better use Mikrotik (( Firewalll + web proxy )) to switch the http requist , or use Cisco with WCCP mode http://www.sublime.com.au/squid-wccp/ , or use REDHAD firewall . i ...

ahmedramze

This is My config work for 50 online client http_port 8080 icp_port 0 cache_mem 300 MB maximum_object_size 160386 KB maximum_object_size_in_memory 3200 KB memory_replacement_policy lru cache_dir aufs /usr/local/squid/cache 30000 32 512 reference_age 1 month acl all src 0.0.0.0/0.0.0.0 acl manager pr...

ahmedramze

Dear this is the squid.conf just put the ip for mikrotk box on ACL safe note this config with cache Accelerator Mode http://www.deckle.co.za/squid-users-guide/Accelerator_Mode (( Speed up Hotspot )) you need to install Apatche web server with full Cgi or php code also this configuration for 10G HDD ...

ahmedramze

I was try to install SR2 or SR5 on RB112 with 18V-2A power supply , I can see the card in /driver print but its not shown in /in wi print I'm replace the board by use RB532 with same POE 18V-2A , fully work , i try to install other card on MiniPC2 , same problem above , i was replace the POE use 48V...

ahmedramze

I'm sure your problem it from your bad configration of hotspot , if you can send the configration by /ip hotspot export /ip dhcp-server export /ip firewall nat export and send it . Your problem is happen when you use saim IP for DHCP and Hotspot . the scanner software that hack the physical layer of...

ahmedramze

Hi

if there is any idea to put Dude inside Mikrotik OS , Like Intermapper S.W ?

Regard

ahmedramze

How can I make unlimited Download from cache for limited PPPoE users For Example I have 2 profile with 256/128 kps and 128/64 Kps for users but I want them to unlimited speed donload prom cache I'm Use global-in and global-out queues in http://www.mikrotik.com/docs/ros/2.8/root/queue But it was just...

ahmedramze

we will try to make this into the next usermanager incarnation

Yes Thanks and I will make a arabic user manual for RouterOS to make Mikrotik MultiLanguages 100%

ahmedramze

Hi! Is there a chance to the user manager web interface to change language? I like hungarian. Hotspot pages to hungarian? Yes you can Change the web interface into your language , you can use the abouve code and change the arabic code only by similar words in yours languages , (( you can see the di...

ahmedramze

Arabic is Ready make folder name ar in hotspot folder and put these file I'm Ready for any Question 1- login.html <html> <head> <title>خدمة الهوت سبوت من مايكروتك - صفحة الدخول </title> <meta http-equiv="Content-Type" content="text/html; charset=windows-1256"> <meta http-equiv=&q...

ahmedramze

Hi all

I want to make Translation for HOTSPOT pages into different languages , so we will need help from all,

I will translate it to arabic Language ,

we need help for France , Germany ..... from all

and get it to support to put it in the New version of Mikrotik

any comment ?

ahmedramze

Hi If you want to change your hotspot Login page read this 1- design you home page with any program (( Front page , MMFlash ...etc )) 2-after complete your design edit it with notepad or WordPad 3- search on this Tage <body> 4- put this code after the above tage <body> $(if chap-id) <form name="...

ahmedramze

you can use the queue tree instead

More Explain Please

ahmedramze

Just I know how get the MAC for user

in HTML variable name is $mac and it was string need to convert .

and more idea

if any one has OCX file on SNMP , I'm try to search VB and Java script but all them not free.

Regard and Still work

ahmedramze

any new Idea ? to start work .

ahmedramze

I'm understand you we can do it like MRTG software and generate PNG images , Right ?

ahmedramze

No I'm not want to Disscuse the Security options for the Languages , I wana to told you we cant get admin option to user to get the value of his signal , all user (( hackers )) or not , have spectrum program that can get the value of admin level , every week I'm close may ports in my network . Final...

ahmedramze

I'm not want to learn in this how to hack the PHP and SQL and CGI script , there is many Seecurity Holes,

for fun like phpBB forum , ........!!!!!

regard

ahmedramze

Yes the PHP and HTML can not be hacked , and I think if we use the SNMP oid , to get the signal strengh but i have problem how can I know the MAC-addrees or the Number for assined Item with Print oid command [admin@MikroTik] interface wireless registration-table> print oid 0 strength=.1.3.6.1.4.1.14...

ahmedramze

We are talk about HOTSPOT user not Mikrotik (( admin or )) any user , I didn't want to great a script that may be some hackers use it to login inside Mikrotik Box ? any Idea , and some users use (( Wireless Client Routers )) like D-Link or UsRobotik and the Hotspot see the LAN MAC-Address of them PC...

ahmedramze

Can you Help Me If you have a Script that divide the bandwidth betwen users for Example I have 128/256 total band when 1 user log in (( PPPOE or HotSpote )) His Limited will be 128/256 and 2 user log in them band will be Divide in to 64/128 for each one I want the users to use the band when a few nu...

ahmedramze

Hi all

I need help in Hotspot Script , How can I add the status of wirelss client , I want to Get the SNMP or /interface wireless regsitartion-table , and get the signal of user accourding his MAC-Address and put it in the hotspot status page . also the Tx/Rx of user .

Thanx for help

ahmedramze

Look at this topic,
http://forum.mikrotik.com//viewtopic.php?t=7007

Dear Sergejs ,

Thanks for Replay , you know there is larg number of Topics , and im to dailly login

and im want to ask if you test the 900Mhz cards

Thanks

ahmedramze

Hello I want to ask it Mikrotik OS support Super Range 9 with Chipset AR5213 MAC/BB this is the link http://www.ubnt.com/super_range9.php4 and this features With up to 700mW of output power, 54Mbps data rates, -93dBm of receive sensitivity performance, and advanced noise immunity functionality; the ...

ahmedramze

Hello

is in plan of RouterOS to support WiMAX DM256 Chipset or other WiMAX products ?

this is the WiMAX Card
http://www.wavesat.com/products/mini-pci.html

Thanks

ahmedramze

I think this rule may be work

ip firwall add chain=dst-nat action=nat src-address= PUBLIC IP to-dst-address= PrivteIP

or

make Bridge interface bt WAN and LAN taht make all Pakage will be go throught them

Regard

ahmedramze

hello

Can any one hellp me to use Multiple Internet Connections i have 2 internet connection

How can I use both them in my network

I found some think http://www.shorewall.net/MultiISP.html

Thanks

ahmedramze

are you install from CD or Flopy Disk ??? this Erorr may be from your Flopy Disk , you can test it by NetInstall and install the pakages in your hard disk under windows , use WinZIP or WinRAR or WinImage to Extract the .npk file from .iso or .img if there is erorr in in Extracted file that mean ther...

ahmedramze

ahmedramze

please if there is an option to add a Password and user name to the page of Graph ,and make a muti pages for Ex. I get to my users a Graph to see his Load I need to one can see other Graph (( I know in accsess list method )) , in my old Server i use Like the linux commad httpass to make a list of us...

ahmedramze

Hello i install in My RedHad Box a SkyStar DVB Card and Use it as (( 2 way )) intenet , upload from Dialup in (( M.K.T )) box and download from R.H.Box what yours think if we install the DVB card in M.K.T box the Driver in Linux in this web site http://www.linuxtv.org/ and the linux use it as WLAN C...

Search found 112 matches