Community discussions

Search found 15 matches

by nfored
Thu Oct 10, 2019 3:17 am
Forum: Beginner Basics
Topic: Very high latency on CHS with P10 trial.
Replies: 4
Views: 666

Re: Very high latency on CHS with P10 trial.

I did some more testing and I am starting to think this is not an issue with the CHR. I think I have a bad AP, doing more testing I was able to replicate the issue with the hardware firewall with my device connected to a different AP. I got lead to this by decided to see what wired to wired testing ...
by nfored
Thu Oct 10, 2019 2:18 am
Forum: Beginner Basics
Topic: Very high latency on CHS with P10 trial.
Replies: 4
Views: 666

Re: Very high latency on CHS with P10 trial.

I changed config to a single trunked port broke that to vlans, then added the vlans to a bridge and get slightly better but still off results. So it goes several pings low then climbs then stays high for several pings then starts over. Screenshot_20191009-181126_Network Analyzer.jpg Screenshot_20191...
by nfored
Wed Oct 09, 2019 3:00 am
Forum: Beginner Basics
Topic: Very high latency on CHS with P10 trial.
Replies: 4
Views: 666

Very high latency on CHS with P10 trial.

I wanted to get a feel for how MT router in my environment would look and if it would solve a problem I had. So before buying the 4011 the people on this forum helped me decided on I decided to spin up CHR in my esx cluster. I created 1 interface per VLAN having this in the path seems to add around ...
by nfored
Thu Oct 03, 2019 10:15 pm
Forum: Announcements
Topic: SwOS version 2.10 released!
Replies: 38
Views: 19929

Re: SwOS version 2.10 released!

Can you not just select static from the drop-down? I have only used passive and active on Mikrotik myself but I see static as an option, maybe there is a code issue or something but when I have done static between my esx host and my Fortinet switches it was as simple as tagging the ports as part of ...
by nfored
Thu Oct 03, 2019 10:11 pm
Forum: SwOS
Topic: 10G optics
Replies: 2
Views: 706

Re: 10G optics

Thank you, sorry I missed your post I forgot to tag notifications on this. I appreciate your feed back.
by nfored
Thu Oct 03, 2019 4:09 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 72818

Re: RB4011

@lapsio Thank you that is exactly what I wanted to hear.
by nfored
Thu Oct 03, 2019 12:44 am
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 72818

Re: RB4011

Can anyone tell me what I might expect routing between 10 subnets using just the sfp+ connected to CCS326 might give me? Currently, I have a FortiGate 200b as my Firewall/router and it will remain the firewall to the internet, but when I am running test on some of my esx hosts that are 10G capable i...
by nfored
Fri Sep 27, 2019 5:41 pm
Forum: SwOS
Topic: 10G optics
Replies: 2
Views: 706

10G optics

Hello. I am considering moving to 10G SFP+ optics rather than the DAC's I am using to see if that correct the issue with the RX/TX Pauses I am having. I am wanting to know if people have found that non Mikrotik SFP+ cause issues and I need to stick to Mikorik branded ones or there are 3rd party opti...
by nfored
Fri Sep 27, 2019 5:36 pm
Forum: SwOS
Topic: Overruns on CSS326-24G-2S+RM
Replies: 44
Views: 10509

Re: Overruns on CSS326-24G-2S+RM

If you look at my screen grab above you can see a list of 3M DAC's that also seem to have this same issue with Flow control enabled. I am really leaning towards trying optics out, if you try optics I would be interested to hear if that fixed it. @chechito I have never had to disable flow control bef...
by nfored
Tue Sep 24, 2019 6:57 am
Forum: SwOS
Topic: Overruns on CSS326-24G-2S+RM
Replies: 44
Views: 10509

Re: Overruns on CSS326-24G-2S+RM

This is why I am wondering if its the DAC's. On the interface labeled Core94 I can get seeing this type of error as its a 10g link that downstream has to exit 1g link either to a lan device or the fiber internet. However on the esx it doesn't make much sense they each have bonded 10g pairs and I can...
by nfored
Tue Sep 24, 2019 5:03 am
Forum: Announcements
Topic: SwOS version 2.10 released!
Replies: 38
Views: 19929

Re: SwOS version 2.10 released!

I now have two switches running this both with cisco active Twinax and they both suffer RX/TX Pauses, but that seems to be an issue going back to 2.8 code. Aside from that all other features seem to work, RSTP works, vlans work, lacp works. Even with the Pauses I can still push data through at high ...
by nfored
Tue Sep 24, 2019 4:59 am
Forum: SwOS
Topic: Overruns on CSS326-24G-2S+RM
Replies: 44
Views: 10509

Re: Overruns on CSS326-24G-2S+RM

I have this same issue 2.10 I am wondering if anyone can say if they have this issue using Mikrotik SFP+ transceiver and any brand of fiber. I am starting to wonder if its a DAC issue. I can see this between my CSS3266-24G-2S+RM and my CRS309-1G-8S+ using a 10m Cisco active Twinax, as well as betwee...
by nfored
Tue Sep 24, 2019 4:39 am
Forum: RouterBOARD hardware
Topic: CRS326-24G-2S+RM fans
Replies: 18
Views: 4573

Re: CRS326-24G-2S+RM fans

Just in case anyone else gets this and reads this old post, Mine was running about 67 at idle in a full 6u network rack. I installed a fan and it went to 37 under load, but I still get TX/RX Pauses when using a 10m Cisco Active Twinax between it and another Mikrotik switch. I see this same issue on ...
by nfored
Mon Sep 23, 2019 6:01 pm
Forum: SwOS
Topic: Management Port MAC Address not unique
Replies: 0
Views: 328

Management Port MAC Address not unique

Hello All. I am new to SWos so maybe this is just how it is but hoping I just did something wrong. on both CSS326-24G-2S+ and CRS309-1G-8S+ all ports seem to share the same MAC address, where this is a problem is when I want to set the management interface to "Allow From Ports". because all ports sh...
by nfored
Fri Sep 06, 2019 4:48 pm
Forum: Announcements
Topic: SwOS version 2.10 released!
Replies: 38
Views: 19929

Re: SwOS version 2.10 released!

This my first MikroTik switch CRS309 just Plugged it in yesterday and installed 2.10. Running SwOS feeding three ESX servers each with dual 10g Lag's using Twinax, with VLAN enforcement. Everything seems to work correctly, though my current POE switches won't seem to power this switch for some reaso...