Thank you for the UpdateSee attached below
Can you pls share some Screenshot of the same?If you check "local capabilities" on BGP peer, you can see MikroTik advertises gr for some reason.ROS do not suppport BGP-GR
Excellent Feature... Most Required and awaited Feature
*) bgp - added support for BGP advertisement displaying (CLI only);
Even ROSv7 is not supporting...I'm not brave enough to try ROS v7 yet - or should I?
Sure I Will Agree on This :DIf you don't read what they write, why should they read what you write?
Yes Trying hard to find a 2.5G Optical SFP but not easily available in market
We're awaiting the results of your test now.
I went through this Thread but now ROS is having Negotiations 2.5G and 5G in its setting. Any chance that you have tried 2.5G SFP on Normal SFp cage of mikrotik and Set Manual Negotiation for that interface???It means you’re likely to get 1G rates, if it works at all. Related thread.
Did Anyone Tested it???I doubt it is the feature you (and me as well) are wanting. The RADIUS not recording prefix delegation is not a bug, it is the lack of a feature.
What exactly is Fixed... Is it the issue with Radius not Recording PD.????*) pppoe - fixed DHCPv6 PD;
Same Question from My side...What exactly was fixed here?*) winbox - fixed support for "Delegated-IPv6-Prefix" for PPP services;
+1BGP option like Juniper "advertise-inactive".
Yes, We just wan to monitor one of our server and our WAN2 is most reliable as it is connected to Core RoutersSo if wan2 goes down, you will not get any email at all since only wan2 can send email?
Can Anyone from Mikrotik Support address this please?!!!Version 6.48beta58 has been released.
*) dhcpv6 server - added support for "Delegated-IPv6-Prefix" for PPP services;
Dose this means support is added for Radius Accounting or Can Anyone please Explain this???
Version 6.48beta58 has been released.
*) dhcpv6 server - added support for "Delegated-IPv6-Prefix" for PPP services;
You Mean Mikrotik is never gona Develop IPv6?Use Cisco for IPv6 accounting and Delegated prefix.
You can try Pin Hole Reset MethodThe reset button is not broken .. Rset button is diabled and the ethernet port is disabled too. i nee to enable the ethernet port
I agree with thisNo torrent client, please. It will waste resources from both the router and Mikrotik as a company. Better to focus in the router/wireless part, and deliver those long needed features.
ThanksThat is much better, the colour clashing was the real problem....... now they flow together well. '-P
I tired the same and it is working for me.... Please check your /ipv6 firewallI can connect via ipv6 to winbox/ssh/web.
you can just try useing Bridge to make them communicate with each other.i am trying to setup hap lite as switch only without firewall, how do i tag lan and wifi on the same vlan, so both can communicate with each other?
You mean in ROS v6 also?Rules work for both ipv4 and ipv6.
/ip route rule
I Think We will get ROS v7.5 StableDid I miss 7.0 release? %)
I guess we all miss it very much.
Great to Hear ThatThe USB port of my CCR1036-8G-2S+ now works again
Same Question from my side!NAT Hardware Offloading !
Great news. When is this coming to the actual router products like CCR series or new router products ?
Try Fast Track and remove firewall rules to reduce CPU UtilizationI agree. The CCR1009 side is working just fine, it is the hEX side that is using high CPU (RB750Gr3).I think CCR1009 should easly handle the L2TP Tunnel with 70Mbps Throughput...
Then I think some Mikrotik Support Member will surely answer to this post!They gave me this same response a year ago.I Know they have not given any ETA, but atleast it gives all of us a hope.
Mikrotik Support Reference No.: SUP-20538Do you have a ticket number?
Thank you for the fast responseMost likely last week of July or little later
AWESOMEThanks guys, that seems to have been the magic switch
Set the MTU on ND to match the max on the PPPoE and all is working for now
What are the sites which you are unable to access??Yes as you can see as part of my posts I am able to resolve DNS for IPv6
I am also able to browse SOME ipv6 enabled sites when IPv4 is disabled
One of the most annoying issues every faced "LOW SPACE IN DISK"Impossible to update in Hap Lite.
smips.JPG
YUP! Virtual MUM will be awsome idea.......Any plans to retake MUMs but in virtual format for the time being until we pass this COVID-19 Pandemic? That will be awesome!!
It is Still Not Working Normis.nithin kumar
What's new in 6.45.1 (2019-Jun-27 10:23):
*) dhcpv6-server - added RADIUS accounting support with queue based statistics;
It's already in RouterOS.
Please add a static route and try. i hope this may solve the issue...Hi there
Yes they are. Lan is 192.168.100. 0
And remote is 10.0.0.0