MikroTik

danunjaya123

Hello Everyone,
Please help me for the below concept.
I want only Youtube traffic from 1 ISP and remaining traffic from Another ISP.

danunjaya123

Hello Everyone, My customer is using global DNS i.e 8.8.8.8, 1.1.1.1 and we have our own DNS with our end, Here the issue is comes to Akamai traffic because they will serve CDN traffic using ISP DNS based only. Which NAT rule or any other option will help for this solution. Customer is using static ...

danunjaya123

Apr/28/2021 17:36:24 system,error,critical router rebooted without proper shutdown, probably power outage

i got this log but i dont know exact problem.

danunjaya123

My mikrotik is auto rebooting everyday after this update done.

danunjaya123

Hello Everyone,
How can we know mikrotik is rebooted with what reason

danunjaya123

@Mikrotik Team can you see this issue?

danunjaya123

10G Links,

We had few 10G links with CCR, after upgrading all these went down randomly, SFP+ port 2, and they would not come back up, tried to roll back but no luck, changed SFP, finally did Hard reboot and the port came up.

Now links are up in New version or old version?

danunjaya123

Hello,
I Have IPv6 traffic on Mikrotik CCR-1036, But Mikrotik unable to send IPv6 traffic related data on SNMP to Observium. In cisco we are getting the IPv6 traffic data to OBS.

Mikrotik Team please help me on this issue.

danunjaya123

Use Cisco for IPv6 accounting and Delegated prefix.

danunjaya123

Hello everyone i need to configure OSPF from Cisco router to Mikrotik, Please let me know the configuration part.

We are having ipv4 and ipv6 network.

danunjaya123

Hi,
How can we configure IPv4 and IPv6 DHCP using Radius???

I need my customers traffic on IPv6 over DHCP only. I have CCR-1036-12G-4S
Is there any option for dhcpv6 with radius ??

danunjaya123

Hi all,

Im having issue with PPPoE customers.
I have configured PPPoE on my router and it was working fine.
suddenly internet is not working i have seen the session it was there in router and RADIUS and seen ping to any ip not working.

Mikrotik CCR-1036

danunjaya123

Hi all,

I have configured IPv6 over PPPoE and dial up from customer end i got IPv6 IP and IPv6 PD pool but in RADIUS i have got only IPv6 IP which is assigned to client Wireless router not giving the PD pool to the RADIUS.

Kindly give solution for this issue.

danunjaya123

Hi Mikrotik team.

Any update on my issue regarding PD pool not reflecting in radius server

danunjaya123

Hello all,

I have got 1 issue in the IPv6 over PPPoE service, When i dial up i have got IP and PD Pool,DNS but in RADIUS i have not received any PD pool just getting only IP Prifix.

Thanks.

danunjaya123

My CCR-1 configured as a DHCPv6 for clients on different vlans and CCR-2 is configured as Static for different vlans (There is no dhcpv6 config). CCR-1 Ex: 2001:2001::/64 DHCP Pool CCR-2 Ex: 2002:2002:2002:2002::1/126 Static IP 2003:2003:2003:2003::1/126 Static IP When i have tested in PC i have got...

danunjaya123

Is there any option for Public Hotspot?

danunjaya123

Hi all, I have 2 CCR1036 and i have Cisco 7606 BGP. I have added IPv6 IP to the Mikrotiks and routed pools with /48, I have started the DHCPv6 from mikrotik-1 in vlan 139 and i have added Static IP from Mikrotik-2 in vlan 139. Issue is when i check in DHCP i have got that dhcp pool IP and static Poo...

danunjaya123

I need DNS cache in my CCR but it was not working on IPv6. In Reply #4 you show DNS settings but you have not enabled "Allow remote requests". This means your DNS server is only used by the router itself. Is that what you want? When you want to use it from other computers, you need to enab...

danunjaya123

When i add this i have got issue with some packets are blocking on mikrotik and when i did trace to any site my mikrotik IP getting request timedout.

danunjaya123

Is this work with my CCR1036 ?

danunjaya123

Thanks it worked issue is i have not added gateway in routes. @danunjaya123: It's two different things, /127 in IPv6 is like /31 in IPv4, let's say a little unusual. Your /126 is normal configuration that works. Your problem is wrong gateway for default route, just use address 2407:ff00:7::d, instea...

danunjaya123

I have enabled IPv6 and configured IP

package.PNG

I have CCR1036.

danunjaya123

[admin@E4:8D:8C:2B:96:B7] > system default-configuration print script: #| LAN: #| IP on ether1: 192.168.88.1/24; :global defconfMode; :log info "Starting defconf script"; #------------------------------------------------------------------------------- # Apply configuration. # these command...

danunjaya123

[admin@4C:5E:CC:DD:9F:D8] > ping 2606:4700:4700::1111 SEQ HOST SIZE TTL TIME STATUS 0 2606:4700:4700::1111 timeout 1 2606:4700:4700::1111 timeout 2 2407:ff00:7::e 104 64 597ms address unreachable 3 2606:4700:4700::1111 timeout sent=4 received=0 packet-loss=100% [admin@4C:5E:CC:DD:9F:D8] /ipv6 addres...

danunjaya123

I have no idea on IPv6 firewall rules can you please share me on this.

danunjaya123

Actually i have used Hotspot in anther mikrotik there DNS cache works fine. For this i have not created any manual rules i just given script and schedules.

Is there no option on IPv6?

danunjaya123

+1

IPv6 /126 is not working to me on CCR1036

danunjaya123

Hi,

I have asking about DNS cache in IPv6.
I have using Ipv6 as DHCP for my office but DNS cache is not coming.

cache.PNG

danunjaya123

Hi All,

Is there any suggestion for this issue.

I have IPv6 and IPv4 DHCP traffic and PPPoE traffic but In DNS cache nothing is coming.

danunjaya123

Hi, I have removed IPv6 Pool in Vlan 100 from BGP so now no more contact from BGP to client on IPv6. But the same issue some time i have seen that google mails and sheets getting error like internet not connected(ping is ok for all websites). I got complaint with Play store mainly it's very slow aft...

danunjaya123

I have tried same Bandwidth test from LAN Bond in that i have seen 2Gig reaching both ports are using full fledge. I have issue with it when i reach more than 1 gig Traffic i have got packet drops issue. Only 1 Interface is working full traffic other interfaces are going with 100 to 200Mbps traffic....

danunjaya123

I have got upgraded it but i got issue for IPv6.
Now i have degraded.

danunjaya123

I'm Thinking that if we give without IPv6 DNS to clients is IPv6 traffic will go on IPv6 or not ?
Only IPv4 IP & DNS, IPv6 IP,PD Pool will release to clients.

danunjaya123

So when we except solution ?

danunjaya123

I have issue with it when i reach more than 1 gig Traffic i have got packet drops issue. Only 1 Interface is working full traffic other interfaces are going with 100 to 200Mbps traffic. As @xvo said, there is nothing wrong with the 802.3 ad. Just test it with more that one hosts, eg computers. Gener...

danunjaya123

I think Google DNS is not going resolve any sites immediately, I have tried with Cloud fare DNS this is better than google DNS.

Yes.
Can you ping ipv6 address of your ISP from your router? Can you ping 2001:4860:4860::8888 from your router?

danunjaya123

If i want to add 2more ports which one is work ?
Total 4 eth ports.

danunjaya123

I have tried with Balance xor so the bond was no network on it.

You can try balance-xor if cisco supports it, yes, but that's not the point: there is nothing wrong with 802.3ad, you just don't test it right.

danunjaya123

So can i try as below setup? wan-bond.PNG You mean LACP does not work on L2+L3 hash ? Because even in the wiki the example uses L2+L3 No, it means L2+L3 hash is "maximum level" hash for LACP bonding. LACP does not support L3+L4 hash. Balance-xor does, and also switch chip on CRS always use...

danunjaya123

If i have changed from 802.3ad bond link getting down.

802.3ad can't spread a single connection to multiple links.

And even more: L2+L3 hash means that even multiple connections between two particular hosts will use only one of the links.

danunjaya123

Hi mducharme.

I Have network as you said with one vlan.
I have using vlan 100 from CCR and BGP as below ex. graph.The other vlans are created from CCR end for PPPoE.

But i have DNS resolving issue on both DHCP network and PPPoe network.

bgp.png

danunjaya123

HI all,

Can you please suggest me for Cisco to CCR bond issue.

danunjaya123

Hi Mikrotik Team,
Is there any option for IPv6 DNS cache option, I have using IPv6 as DHCPv6 and PPPoE for my clients.

Please suggest me for IPv6 DNS cache setup.

danunjaya123

Yes traffic is going on but when i used 1gig more traffic it was not sharing on both.

But i can see traffic in both ether1 and ether2...

bond1.PNG

speedtest.PNG

danunjaya123

Hi all, I have Cisco 7606 and CCR1036, Huawei S5701. I have connected 2 gig ports on bonding but the traffic is not sharing for both Ports. I did 2 Bondings for LAN and Wan, Lan is connected to Huawei switch with balance rr and Wan is connected is on 802.3ad. For LAN Balance rr is working fine. For ...

danunjaya123

I have seen that with many tries that are resolves on IPv4 every time.( why it was solving IPv6 IP) When i do with "2606:4700:4700::1111" with this DNS it is going to resolve but sometimes getting request timed out issue. When i did with 2001:4860:4860::8888,2001:4860:4860::8844 DNS it is ...

danunjaya123

I got as like below image

resolver.PNG

danunjaya123

Is there any option on CCR for NSLookup? What you really should do is test that same DNS server from different points on your network. It could be some problem with the server itself. For instance does your CCR have the same problem resolving names? This DNS better than Google DNS But not performing...

danunjaya123

You want to block your client address or any attackers ip address ?

danunjaya123

I can strongly say that there is no packet drop issue when doing DNS resolver or while browsing.( i have not seen any packet drop for any websites)
Im getting ping google and google DNS with =16 ms, Facebook with =24ms.

danunjaya123

I have no issue with IPv4 and direct ISP input IPv6 IP, When i give DHCPv6 and PPPoE to my clients there we are getting the issue with DNS. Sometimes it's resolving immediate but sometimes packet losses. With IPv4 DNS resolving with no issue. I have attached the nslookup screenshots. nslookup1.PNG n...

danunjaya123

After all this setup's i have got new issue with DNS resolver. Getting slow browing and some websites are not resolving with IPv6 DNS.

danunjaya123

Hi all,

I have got new issue with ping for websites like google,facebook,netflix,etc,,,. When i ping from my mikrotik all sites are going from IPv4 IP only.
How can i ping IPv6 sites from Mikrotik terminal.

Please give me solution for this.

ping.PNG

danunjaya123

Thanks a lot to all,

My issue was cleared.
1. PPPoE Clints DNS Issue.
2. DHCP Client Gateway issue.
3. DHCP Clients DNS Issue.

danunjaya123

This what i did in the IPv6->ND

nd.PNG

I have getting Valid IPv6 IP and getting Fe80::... gateway, But not able to get IPv6 DNS,
Have you added DHCPV6 server on that vlan? What neighbor discovery settings are configured on the mikrotik under ipv6-> ND?

danunjaya123

On DHCP im using direct PC's only. When i go to IPv6>addresses i have seen many of the clients are showing with FE80::.. link local ip for PPPoE clients ID's and For all vlan's. That is normal. Also going to Neighbors list i have observed that for 1 mac i'm getting public IP also link local IP But s...

danunjaya123

I have seen one more this that is actually issue or not i don't know. When i go to IPv6>addresses i have seen many of the clients are showing with FE80::.. link local ip for PPPoE clients ID's and For all vlan's. address-list.PNG Also going to Neighbors list i have observed that for 1 mac i'm gettin...

danunjaya123

Thank you very much for your replay.. I have getting Valid IPv6 IP and getting Fe80::... gateway, But not able to get IPv6 DNS, When i have removed IPv4 in the PC internet won't works. I have tried one more way i.e i have blocked youtube,facebook on IPv4 and tried to browse when IPv4 and IPv6 interf...

danunjaya123

I have got now this

1gateway.PNG

danunjaya123

I have added the command in cisco port now 1 gateway is coming from CCR. I need to know that In the IPv6 we will not get any Gateway like IPv4? Now i have getting fe80::xxx:xxx: Why this will be coming? Now my issue is DNS From DHCP i have still not getting IPv6 DNS in the DHCP pool. Based on the di...

danunjaya123

I have using like below diagram, network.png I think i need Gateway from My CCR only not from Cisco BGP, After CCR total lan network only. I have seen my cisco commands like below Edgecore.(config-if)#ipv6 nd ? dad (Duplicate Address Detection) managed-config-flag (Hosts should use DHCP for address ...

danunjaya123

In the first (Lan) image it was connected to direct CCR1036 eth3 port and in the second (wifi) image it was connected on my local network which is used by cisco and huawei in the middle ware for local offices. Eth6 is Up link port. 00:15:FA:E1:37:80 this mac is from CCR uplink cisco BGP there is not...

danunjaya123

I'm using cisco, Huawei switches on my network, I have not enabled IPv6 in any switches.

I have gateway with cisco 7606.
local pop switches are Cisco 3750,Cisco SG300, SF300, SG300 POE, Huawei S5701

danunjaya123

I have seen that from direct router ether port i have got 1 Gateway with fe80:..... like below with no DNS. lan.JPG Coming to my local network it was showing 2 Gateways and no DNS like below. wifi.JPG My issue is with both Gateway and DNS in the DHCP. I have an a doubt on IPv6 gateway is this will c...

danunjaya123

Can you please confirm this. I have seen that both gateway's are found in same mikrotik only ( i have selected in the image of mikrotik) pc.PNGmikrotik.PNG I have added IP in the vlan 100 as below let me know is there anything wrong in this. ip.PNG In this second image you seem to be on a network wi...

danunjaya123

ipv6.PNG

Go to https://ipv6-test.com/ to verify IPv6 is working properly.
[/quote]

danunjaya123

I have seen that both gateway's are found in same mikrotik only ( i have selected in the image of mikrotik) pc.PNG mikrotik.PNG I have added IP in the vlan 100 as below let me know is there anything wrong in this. ip.PNG In this second image you seem to be on a network with two routers connected sim...

danunjaya123

I have moved same 3 vlans to the Firewall of Cyberoam it was working fine. Gateway is 192.168.10.1,10.0.2.1,172.17.112.4 these are my vlan's gateway's. For the vlan1 switch IP traceroot is going to Public network i don't know why it was going to public. So now can you ping switches from router itsel...

danunjaya123

My PPPoE issue was resolved but coming to DHCP for my office purpose there i was issues. 1. Unable to get Default Gateway 2. Unable to get DNS. I have issue with IPv6 in DHCP and PPPoE, Im not able to get gateway and DNS for clients. May i Know how it will be come on PPPoE and DHCP. Mikrotik CCR1036...

danunjaya123

I have seen that actual MTU is coming for some of my customers are getting 1480 and 1452.

mtu.PNG

danunjaya123

I have added vlan in interface and added IP address of it.

vlanlist.PNG

vlan1.PNG

Did you configure IP address on vkan1 interface? An address from 192.168.10.0/24 subnet? Those switches, do they have default gateway configured? Is it the same main router?

danunjaya123

I can't avoid Vlan1 bcz some of my Switches will work on Vlan 1 only, SO i need it compulsory, Please give me solution. The 10.0.2.20 box, does it have vlan1 properly configured? If it's a Mikrotik: beware that ROS uses VLAN ID=1 as an implicit default in many places and can, thus, behave unexpected...

danunjaya123

I have dial up from Wifi router and got below IP and DNS, Pd prifix etc... router.PNG When i connect PC i have got Only IP of IPv6 all other came with IPv4 as below . from router.PNG Is this working fine or i have to do anything else. Coming to DHCP configuration i have issue with DNS and Gateway Li...

danunjaya123

Is this open suorce ? Let me know how can we install it. Yes graph is hosted on device only! In my company I use Observium, free PHP tool that is automatic discovery with SNMP. Is great to see traffic, discovery, map, processor, ram, storage and all others! All device types supported and most of all...

danunjaya123

Thank you very much there in my devices it was "Yes" now i have changed it to "NO". I have got DNS in PPPoe Dial up in Dlink Router. Kindly give me solution for Gateway also in PPPoE. Coming to DHCP still same issue not able to get DNS and Gateway. I have tried to check all vlans...

danunjaya123

I have tried to check all vlans disable and enable but dns is still same and why gateway is also not coming ? I'm using mikrotik as a server and there is no mikrotik clients in my end, Here all are Dlink, TP Link, Neatgear,etc,,,,. Home router are in PPPoE for my customers. I have using Mobile phone...

danunjaya123

I have removed all settings under bridge. Still i have facing the issue with vlan 1 IP's ping. No, I don't think you need bridge ... hence my suggestion to remove the remaining config under /interface bridge port . If you add IP config to vlan1 interface, can you access devices in 192.168.10.0/24 ne...

danunjaya123

Thanks for your replay, I have removed vlan 1 that time so it was not there in the config file. Coming to bridge im not using it. Is this required to me now ? I need to know which firewall rules have to be add? Somewhere you have to do routing between different subnets (VLANs ... that's 10.0.2.0/24,...

danunjaya123

Is there any option on DHCP network for customer using RADIUS, I'm going to implement IPv6 on PPPoe for my customer as per this. sure. in general IPv6 address auto configuration can work w/o any extra things - so you don't necessarily need DHCP, like with IPv4, for hosts SLAAC can do everything. how...

danunjaya123

login as: admin admin@***'s password: MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK MikroTik RouterOS 6.45.7...

danunjaya123

I'm using mikrotik as a server and there is no mikrotik clients in my end, Here all are Dlink, TP Link, Neatgear,etc,,,,. Home router are in PPPoE for my customers. I have using Mobile phone and windows PC's and apple mac's on DHCP for my office clients purpose. In both i have receiving the IP only,...

danunjaya123

Thanks for your replay,
I have to turned off the " Use Peer DNS" in the dhcp client settings at clients end or on my server end? Below i have added the image of it, There Interface Eth6 is my up link.

can you suggest on this.

here it's only server not client.

peer-dns.PNG

danunjaya123

I need to know which firewall rules have to be add? Somewhere you have to do routing between different subnets (VLANs ... that's 10.0.2.0/24, 192.168.10.0/24 and 172.17.112.0/22 ... the most sensible point would be your main router. To make sure only allowed/required connections between the 3 subnet...

danunjaya123

Below attached sample network diagram.

vlans.png

danunjaya123

I have 3 vlans are from 1 mikrotik to local all POP switches and clients i.e Vlan 1 is for my switches management IP Pool 192.168.10.1/24( static Pool) Vlan 2 is for my switches management IP Pool 10.0.2.1/24(static Pool) Vlan 100 if for my clients in branch office. 172.17.112.1/22( DHCP Pool) I hav...

danunjaya123

I need to know how can we use IPv6 for customer's. How can we give IPv6 service to the customer through the DHCP? Static? PPPoE? any other way?. I have a radius and customer are ready to connect with IPv6 on dhcp or pppoe or static, Here my problem is in the PPPoE customer's are getting connected wi...

danunjaya123

Anyone can help me!

danunjaya123

Is there any updates on IPv6 related ? RouterOS version 6.45.7 has been released in public "stable" channel! Before an upgrade: 1) Remember to make backup/export files before an upgrade and save them on another storage device; 2) Make sure the device will not lose power during upgrade proc...

danunjaya123

I have tried to check btest but it was not connecting?

The btest server 207.32.194.24 is now also IPv6
IPv4 address: 207.32.194.24
IPv6 address: 2605:4e40:0:1fe::
user: btest
password: btest

danunjaya123

We can use our Own DNS or other DNS, But it may it take time to resolve. If there is own DNS it will resolve fastly.

Is it possible to make wifi client run on another DNS server then Ethernet cable client have?

danunjaya123

I think this is not issue!

danunjaya123

I have tried to get traffic from IPv6 only after disabling IPv4 it's not working. Also i tried to block internet on IPv4 to use IPv6 traffic not worked. I have got only IPv4 dns if i removed it no internet. About DNS IPv4 DNS can serve AAAA as well. Is Dlink client for your ISP and you want share IP...

danunjaya123

I have seen that there is no teredo installed in my PC. Teredo is a transition technology that gives full IPv6 connectivity for IPv6-capable hosts that are on the IPv4 Internet but have no native connection to an IPv6 network. Unlike similar protocols such as 6to4, it can perform its function even f...

danunjaya123

May i know what is teredo, I have using windows 7 and windows 8.1 also windows 10, From Apple i have seen macbook pro, Also IPhone all are not received DNS and gateway. First uninstall Teredo. When you have native IPv6 you do not need Teredo. And why do you have 2 IPv6 gateways ? About DNS IPv4 DNS ...

danunjaya123

I have added Both DNS in my router but not getting on DHCP and PPPoE. Connected to Dlink on PPPoE same issue and also i have tried to dial up on Direct PC same i have not received IPv6 DNS.

gateway.PNG

dns.PNG

danunjaya123

Anyone can help me please.

danunjaya123

I have configured IPv6 PPPoE and DHCP but i was got issue on both for clients end not able to get DNS and in PPPoE Gateway & DNS not coming.

Below attached PPPoE client and DHCP client images.

image (1).png

image.png

danunjaya123

I have issue with IPv6 in DHCP and PPPoE, Im not able to get gateway and DNS for clients.

May i Know how it will be come on PPPoE and DHCP.

Mikrotik CCR1036-12G-4S

danunjaya123

I have issue with IPv6 in DHCP and PPPoE, Im not able to get gateway and DNS for clients.

May i Know how it will be come on PPPoE and DHCP.

Mikrotik CCR1036-12G-4S

danunjaya123

I have configured PPPoE on IPv6 for my customers on different Vlan's, Now i have got issue in this when i did PPPoE Dail at customer end getting IPv6 IP and showing IPv6 for my PC but not able to get browsing on IPv6 traffic, For this i have found that it was IPv6 DNS issue. When i dail On PPPoE get...

danunjaya123

I have configured PPPoE on IPv6 for my customers on different Vlan's, Now i have got issue in this when i did PPPoE Dail at customer end getting IPv6 IP and showing IPv6 for my PC but not able to get browsing on IPv6 traffic, For this i have found that it was IPv6 DNS issue. When i dail On PPPoE get...

Search found 102 matches