Community discussions

Search found 224 matches

by mangust
Mon Mar 23, 2015 8:31 pm
Forum: Announcements
Topic: RouterOS v6.27 released
Replies: 273
Views: 100812

Re: RouterOS v6.27 released

An error, which I don't know the meaning of, occasionally appears in the log. I would be greateful if you could tell me if this error occurs due to a configuration fault or if someone is trying to connect but I am unable to see the IP from which it is coming from. This started happening after upgra...
by mangust
Fri Oct 03, 2014 9:04 am
Forum: General
Topic: How to exclude a few IPs from IPSEC VPN tunnel?
Replies: 3
Views: 1030

Re: How to exclude a few IPs from IPSEC VPN tunnel?

Maybe by two rules. One for interval before the address and second one after?
Well , this is almost impossible.
How would you recommend to to separate 0.0.0.0/0 to exclude 10.20.30.0/24 ?

Anyone else ? Any thoughts ?
by mangust
Thu Oct 02, 2014 1:21 pm
Forum: General
Topic: How to exclude a few IPs from IPSEC VPN tunnel?
Replies: 3
Views: 1030

How to exclude a few IPs from IPSEC VPN tunnel?

Hello All.
I have created ipsec VPN tunnel with destination 0/0 - meaning i use this vpn tunnel for Internet connection.
However, I got a task to create another one tunnel to destination 10.20.30.0/24.
How can I exclude 10.20.30.0/24 from the first tunnel ? is that possible?
by mangust
Fri Jul 18, 2014 3:01 pm
Forum: General
Topic: v6.16/v6.17
Replies: 187
Views: 46886

Re: v6.16

Shoould i use wireless or wirless-fp package on RB2011UiAS-2Hnd?
Once I enable wireless-fp and reboot wireless goes to disable state.
Is that OK ?
by mangust
Thu May 22, 2014 11:13 am
Forum: General
Topic: v6.13 released!
Replies: 177
Views: 49314

Re: v6.13 released!

I just recieved my new CCR1009-8G-1S
Upadate to 6.12 -> OK
Upadate to 6.13 -> Problem !!!
PPC package for CCR box ?
by mangust
Wed Jan 22, 2014 9:05 pm
Forum: General
Topic: Tuning perfomance on RB1100AHx2
Replies: 1
Views: 652

Tuning perfomance on RB1100AHx2

Hi, I have some fiber optic cloud (10G) between two RB1100AHx2 (RoS 6.7). However, when I test performance using rouerboard Bandwith Test I've got only 300Mbit/s. Is there any way to optimize routers? 1. I don’t have any queues on the router. Is there any difference if I'm using “only-hardware-queue...
by mangust
Sun Jan 12, 2014 12:23 pm
Forum: General
Topic: CRS125-24G-1S-RM vs RB2011UiAS-RM (perfomance)
Replies: 3
Views: 1616

Re: CRS125-24G-1S-RM vs RB2011UiAS-RM (perfomance)

Thank you !
by mangust
Sat Jan 11, 2014 9:20 am
Forum: General
Topic: CRS125-24G-1S-RM vs RB2011UiAS-RM (perfomance)
Replies: 3
Views: 1616

CRS125-24G-1S-RM vs RB2011UiAS-RM (perfomance)

Hello all. I'm thinking about changing of my RB2011UAS-RM to something more powerful. What I need is ~ 10 -15 nat rules (without firewall), and good performance between 2 routing interfaces (up to 200-300Mbit/sec). Could CRS125-24G-1S-RM be a good solution,or it's better to buy RB1100AHx2? Thank you...
by mangust
Tue Dec 03, 2013 9:55 am
Forum: General
Topic: v6.7 released
Replies: 225
Views: 109869

Re: v6.7 released

ip->firewall->Service Ports are shown as invalid (I) in case "tracking set enabled=no"
Anybody can confirm this (you have to reboot router to replicate this)?
Is that OK or minor bug?
by mangust
Sun Dec 01, 2013 10:55 pm
Forum: General
Topic: TCP SynCookie in 6.6 & 6.7
Replies: 2
Views: 1470

Re: TCP SynCookie in 6.6 & 6.7

Waw! I didn't know that.
Thx a lot.
by mangust
Sat Nov 30, 2013 10:11 pm
Forum: General
Topic: TCP SynCookie in 6.6 & 6.7
Replies: 2
Views: 1470

TCP SynCookie in 6.6 & 6.7

Looks like TCP Syncookies gone in 6.6 and test 6.7 ( November 29).
Could anybody explaine this "hint"?
by mangust
Thu Oct 24, 2013 8:13 pm
Forum: General
Topic: ROS 6.5 Beeline IPSEC over L2TP - mtu problem
Replies: 1
Views: 1228

ROS 6.5 Beeline IPSEC over L2TP - mtu problem

Hello All. I've setup lan-2-lan IPSEC tunel over L2TP line from Beeline (Corbina). Tunnel looks fine besides the fact that http traffic doesnt pass correctly. I can use telnet / ssh via tunnel , also http port is open. All this gives me the idea that something is wrong with MTU. I was trying to setu...
by mangust
Sat Sep 28, 2013 10:57 pm
Forum: General
Topic: v6.4 released
Replies: 170
Views: 61265

Re: v6.4 released

Every major release usually has some bugs to work out.
+1

BTW
UPnP, Does anybdy test this ? Dynamic firewall rule come up, but doesnt work for some reasone. :(
by mangust
Thu Sep 26, 2013 2:20 pm
Forum: General
Topic: v6.4 released
Replies: 170
Views: 61265

Re: v6.4 released

...so it's a real joy to see versions passing by like on highway - you can't really clearly see what's going on around you, but you are moving forward very fast.
http://demo2.mt.lv/webfig/#System:Packa ... or_Updates
:roll:
by mangust
Wed Sep 25, 2013 2:47 pm
Forum: General
Topic: v6.4 released
Replies: 170
Views: 61265

Re: v6.4 released

Hello All.
RB2011Ls, ROS 6.4
Ethernet1 is "Master", ether2 & ether3 are setup as slave.
Then I put comment to ehter1 then ether2& and ether3 resets.
Could anybody confirm this ?
by mangust
Tue Sep 24, 2013 11:50 am
Forum: General
Topic: RB2011UAS downgrade from 6.0.beta14 to 5.26 fails.
Replies: 2
Views: 1039

Re: RB2011UAS downgrade from 6.0.beta14 to 5.26 fails.

New revision (with beeper and power jack on the back) don´t support ROS 5.X
I see.
Thanks for info , Didn't realize that .
by mangust
Fri Sep 20, 2013 1:46 pm
Forum: General
Topic: RB2011UAS downgrade from 6.0.beta14 to 5.26 fails.
Replies: 2
Views: 1039

RB2011UAS downgrade from 6.0.beta14 to 5.26 fails.

Hello everyone.
Be aware:
RB2011UAS. Downgrade from pre-installed 6.0.beta14 to 5.26 will fail the router.
Next step will be - netinstall.
by mangust
Fri Sep 20, 2013 1:41 pm
Forum: General
Topic: Several bugs in Winbox on ROS6.4
Replies: 1
Views: 508

Re: Several bugs in Winbox on ROS6.4

Confirm.
by mangust
Fri Jul 19, 2013 4:30 pm
Forum: General
Topic: I Need advice about IPSEC tunnel
Replies: 6
Views: 1082

Re: I Need advice about IPSEC tunnel

generate policy on both sides will not work. Dear MRZ, Sorry for bothering again but could you briefly explain how it works. And why it should not be ticked at both sides. Also, what if opposite site is Cisco or Checkpoint or TMG, or any other vendor, Should we tick the General policy box at MT? I ...
by mangust
Fri Jul 19, 2013 1:29 pm
Forum: General
Topic: I Need advice about IPSEC tunnel
Replies: 6
Views: 1082

Re: I Need advice about IPSEC tunnel

are you sure it is for the same tunnel? generate policy on both sides will not work. Yes, I pretty much sure that this is the same tunnel. I have both generate policy & initial contact ticked at both sides, and it works (somehow) :o ! I'm gonna to leave generate policy only in the in Main office an...
by mangust
Fri Jul 19, 2013 1:09 pm
Forum: General
Topic: I Need advice about IPSEC tunnel
Replies: 6
Views: 1082

Re: I Need advice about IPSEC tunnel

SA lifetime comes to an end, ipsec generates new SAs and set them as "mature". Old ones are set as "dying" which indicates that they will be soon deleted. well yes, dying means they gonna die , (but when ?) :) Why there are 2 dying and 2 mature for 1 VPN tunnel ? So, it's 8 SAs for one tunnel i tha...
by mangust
Fri Jul 19, 2013 11:39 am
Forum: General
Topic: I Need advice about IPSEC tunnel
Replies: 6
Views: 1082

I Need advice about IPSEC tunnel

Hello All. I've installed RB2011 with ROS 5.25 at central office . There are 4 vpn tunnels exist. Sometime SAs have strange behavior - they do not disappear, and I can't explain why - see attachment. As I understood there should only one pair for each tunnel SRC<->DST /DST<->SRC but sometimes i have...
by mangust
Mon Jul 08, 2013 9:02 am
Forum: General
Topic: L2TP client & Add Default Route with specific Distance.
Replies: 2
Views: 1184

Re: L2TP client & Add Default Route with specific Distance.

ip > route add a route manually with distance of 5 using the l2tp connection as the gateway.
Thx! I'll check.
by mangust
Tue Jul 02, 2013 10:39 am
Forum: General
Topic: L2TP client & Add Default Route with specific Distance.
Replies: 2
Views: 1184

L2TP client & Add Default Route with specific Distance.

Hello All. I have two Internet connection - 1) WAN1 - static public IP 2) WAN2 L2TP (client) Currently 0.0.0.0/0 is routed via WAN1. However I would like to setup PBR and use WAN2 as well. As I understood if i tick "Add Default Route" in L2TP setup it will give me distance=1 the same distance i have...
by mangust
Tue Jan 08, 2013 3:23 pm
Forum: General
Topic: 12 days without respond on the case. Is that OK?
Replies: 5
Views: 978

12 days without respond on the case. Is that OK?

Hello community.
12 days without respond on the case. Is that OK for MT?
Ticket#2012122766000291

I initiated the case on 27 of December, but nobody responded me so far.
by mangust
Mon Dec 17, 2012 9:14 pm
Forum: General
Topic: 5.22 released!
Replies: 104
Views: 48062

Re: 5.22 released!

HI Occasionally, i have almost 90% cpu load on my RB1200 v 5.22 for the short period of time. This is not related traffic, a number of connections, because everything stays constant. Did anybody faced same issue? I'm thinking about snmp issue , but Normis told that it was fixed several version ago. ...
by mangust
Thu Nov 01, 2012 9:58 am
Forum: General
Topic: Primary-Standby Unit in v6.
Replies: 1
Views: 643

Primary-Standby Unit in v6.

Hello all. It could be off topic, but are you guys going to develop something similar to primary/standby technology in v6? Is there any plan for that? I Mean, we may use vrrp, of cause, for failure, but it difficult to update all configuration on both devices each time when you want to change QOS, f...
by mangust
Wed Mar 21, 2012 1:56 pm
Forum: General
Topic: IPSEC logs gone after upgrade from v4 to v5
Replies: 4
Views: 530

Re: IPSEC logs gone after upgrade from v4 to v5

Sooo gooood!!! Thanks a lot for that tip!
+1
Great Thx
by mangust
Wed Mar 21, 2012 9:49 am
Forum: General
Topic: IPSEC logs gone after upgrade from v4 to v5
Replies: 4
Views: 530

IPSEC logs gone after upgrade from v4 to v5

Hello all. Am i overlook something or IPSEC logs (info level) really was removed from "logs" There was SA negotiation at least that I can see in logs in V4. For now (in v5), the only one way to get log on IPSEC is create new logging rule (but that sends a lot of info) Is there any way to get a look ...
by mangust
Sat Feb 25, 2012 9:18 pm
Forum: RouterBOARD hardware
Topic: Lowcost wireless solution
Replies: 3
Views: 844

Re: Lowcost wireless solution

No, all are 5Ghz devices. You can use http://routerboard.com/RB711-2Hn
or 411L + mpci card
:(
The price for these boards is the same as for wireless router (http://routerboard.com/RB751U-2HnD)

Why They cant just create one more outdor product for 2Hz ? (No need to anwrer :shock: )
by mangust
Fri Feb 24, 2012 2:56 pm
Forum: RouterBOARD hardware
Topic: Lowcost wireless solution
Replies: 3
Views: 844

Lowcost wireless solution

Hello All.
Does OmniTIK U-5HnD, GrooveA5Hn or OmniTIK U-5HnD support 2,4Hz band?
I mean I need lowcost outdor wireless 2,4Hz solution.
What can I use?
by mangust
Wed Jan 25, 2012 3:49 pm
Forum: General
Topic: Export compact (new in v5.12)
Replies: 76
Views: 35441

Re: Export compact (new in v5.12)

by mangust
Wed Jan 25, 2012 1:26 pm
Forum: General
Topic: Export compact (new in v5.12)
Replies: 76
Views: 35441

Re: Export compact (new in v5.12)

/export compact
Will be nice to have somthing like
/export compact file=some_backup_file

and to see as result the difference between some_backup_file configuration and current one.
I mean it's better to have way to compare between few configurations.
by mangust
Wed Jan 25, 2012 11:06 am
Forum: General
Topic: Feature Request: Backup name to include system identity
Replies: 13
Views: 2805

Re: Feature Request: Backup name to include system identity

it would take one wrong character to get rid of important logs. Well, this make sense. plus - any intruder would easily find this command and clear his tracks. line=1 line=100 is harder to guess. Hmm. I guess, the intruders will trying to install free version of ROS and check command line options b...
by mangust
Wed Jan 25, 2012 10:42 am
Forum: General
Topic: Feature Request: Backup name to include system identity
Replies: 13
Views: 2805

Re: Feature Request: Backup name to include system identity

I knew that this was discussed several times ago, and I knew that there is way to do that (set line=1, and set back line=100), but it will be very nice to have “clear log” button in log menu.
At least this function could be very useful for every beginers.
by mangust
Wed Jan 25, 2012 10:36 am
Forum: General
Topic: Feature Request: Backup name to include system identity
Replies: 13
Views: 2805

Re: Feature Request: Backup name to include system identity

Sorry for offtopic, but could someone remaind me the reasone why ntp server was removed from “base package” in v5?.
Is there any chance to put this package back into main npk?
by mangust
Fri Jan 13, 2012 12:28 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44822

Re: v5.11 released

x86, ROS5.11.
Am I only the one who cant use packet sniffer?
I mean packet sniffer shows nothing for me than i am tring to start it :(
by mangust
Fri Jan 13, 2012 12:09 pm
Forum: General
Topic: Feature Request: Backup name to include system identity
Replies: 13
Views: 2805

Re: Feature Request: Backup name to include system identity

+1 .... and both those things was requested a long time ago ...
by mangust
Wed Jan 11, 2012 4:10 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44822

Re: v5.11 released

this may be unrelated to routing at all.
Well, Is it safety to use 5.8 instead of 5.11 or it should not be any problem in NAT/Routing (BGP) in 5.11?
by mangust
Wed Jan 11, 2012 1:05 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44822

Re: v5.11 released

I'm experiencing some issue with ssh/ssl traffic via SNAT/MASQ on my x86 5.11. Cannot connect via ssh and all ssl pages opened with huge delay ... Traffic which has no nat goes as it is expected. Have anyone the same issue? I'm disabling IpV6 package. Is that safety or that's not recommended? Cheers.
by mangust
Tue Aug 09, 2011 8:23 pm
Forum: General
Topic: v5.6 released
Replies: 91
Views: 20963

Re: v5.6 released

Strange behavior or of the interface speed graph.
x86 , ROS v5.6 , RealTeck 1G ethernet.

In some pik situation MT show speed which is more then 100Mbit/s, in same time showes some interrupts in graph.
by mangust
Tue Jul 19, 2011 9:42 am
Forum: General
Topic: Feature request: Global commands like ping and traceroute
Replies: 11
Views: 3650

Re: Feature request: Global commands like ping and tracerout

are you sure? what about alias like "ipv6" and when you install the ipv6 package, you couldn't access the ipv6 menu. system commands should always be protected.

anyway, we will make something of all these ideas.
Hello Everybody.
Any updates about "alias command" ?
Is there a way for that?
by mangust
Mon Jun 20, 2011 4:35 pm
Forum: General
Topic: H.323 video blackouts - RB450G v5.4
Replies: 5
Views: 1430

Re: H.323 video blackouts - RB450G v5.4

I ended up replacing the router with an old D-Link DI-604 (with equivalent firewall rules) and have had zero issues. I would have liked to get the Mikrotik working but I just ran out of time and had to get a solution. /ip firewall service-port try to disable h323 Or try to disable connection tracki...
by mangust
Tue Jun 14, 2011 11:55 am
Forum: General
Topic: Bridge Filters not working
Replies: 3
Views: 929

Re: Bridge Filters not working

This bug will be fixed in v5.5
I'm sorry to trouble, but ...
What is the usual time to get answer on ticket?
I mean Ticket#2011061366000357
Thx.
by mangust
Thu Jun 09, 2011 1:01 pm
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31690

Re: RouterOS v5.4 released

V5.4, RB750

[ZZZ] > system console print
Flags: X - disabled, U - used, F - free
# PORT TERM
0 (unknown) vt102
[ZZZ] >
by mangust
Tue May 31, 2011 11:21 pm
Forum: General
Topic: Mikrotik-Total-Limit support?
Replies: 21
Views: 2416

Re: Mikrotik-Total-Limit support?

... you don't need to pay for any license fees to upgrade from 3.28 to 5.x. Upgrading the OS version is free. Only changing license levels costs money.
You should upgrade from 3.28 to 4.17 first, and only after that upgrade once again to 5.4 (if you wish).
by mangust
Thu May 26, 2011 8:30 pm
Forum: General
Topic: v5.3 relised bug on rb 411
Replies: 7
Views: 3650

Re: v5.3 relised bug on rb 411

Note: v5.3 contains a problem that affects RB400 series device Ethernet ports which are not connected to the switch chip. The ports could lose link for a fraction of a second. A fix is scheduled within a few hours

wait v5.4?...
by mangust
Tue May 24, 2011 1:35 pm
Forum: General
Topic: IPSEC & DPD settings for 5.2 Q.
Replies: 1
Views: 3653

IPSEC & DPD settings for 5.2 Q.

Hello all. Where is the tru? Should I manually change in winbox dpd-interval=120s and dpd-maximum-failure=5? Cause looks like default dpd-interval=disable-dpd and dpd-maximum-failure=1 From WIKI dpd-interval (disable-dpd | time; Default: disable-dpd) Dead peer detection interval. If set to disable-d...
by mangust
Tue May 24, 2011 12:46 pm
Forum: General
Topic: Feature requests
Replies: 1163
Views: 212709

Re: Feature requests

/ip dns allow-remote-requests=yes ...
It would be just great to have opportunity make dns accessible only on specific interface.
I understand that it's possible to restrict by firewall , however ...
by mangust
Tue May 24, 2011 11:27 am
Forum: General
Topic: webfig
Replies: 17
Views: 31718

Re: webfig

Every time then I try to connect to http://demo2.mt.lv/webfig/ via Google Chrome I get error page
ERROR: Router has been disconnected (Reconnect)
After I press "Reconnet" button i can successfully login.

There is no such problem with Explorer.

P.S
Some times I get this error page twice.
by mangust
Sun May 22, 2011 6:51 pm
Forum: General
Topic: Feature request: Notepad/ToDolist/Router comments
Replies: 12
Views: 2179

Re: Feature request: Notepad/ToDolist/Router comments

Ok, it's possible to add system note to winbox menu too?
+1
by mangust
Sun May 22, 2011 6:50 pm
Forum: General
Topic: Feature request: Notepad/ToDolist/Router comments
Replies: 12
Views: 2179

Re: Feature request: Notepad/ToDolist/Router comments

"/system note" was made exactly for this reason. Why you can't use it?
Is there any "howto" about "/system note"?
by mangust
Thu May 12, 2011 5:32 pm
Forum: General
Topic: v5.2 released
Replies: 161
Views: 30012

Re: v5.2 released

No. They are all different.
GL
I' realy sorry ( :oops: ), but what is the difference between
total-memory: 270224KiB and total-memory: 256280KiB ???
Looks like both routers has 256Mb RAM.
by mangust
Thu May 12, 2011 12:35 pm
Forum: General
Topic: v5.2 released
Replies: 161
Views: 30012

Re: v5.2 released

It seems like that the max cache size depends on the RAM in the router.
..
As I understand you have the same RAM size on both routers , but max-cache-size for routers is different.
by mangust
Thu May 12, 2011 10:00 am
Forum: General
Topic: v5.2 released
Replies: 161
Views: 30012

Re: v5.2 released

... [admin@MikroTik] > system resource print uptime: 1d2h24m17s version: "5.2" free-memory: 232320KiB total-memory: 270224KiB architecture-name: "x86" board-name: "x86" platform: "MikroTik" [admin@MikroTik] > ip route cache print cache-size: 29487 max-cache-size: 65536 ... Here is another one after...
by mangust
Tue May 03, 2011 3:16 pm
Forum: General
Topic: SSH bug - ROS version 5.0rc10 and rc11
Replies: 16
Views: 2725

Re: SSH bug - ROS version 5.0rc10 and rc11

have you tried 5.2, as there where some ssh fixes about exactly that, if i remember correctly.
Upgrade to 5.2 , then downgrade to 4.17 - fix the problem.

Thx.
by mangust
Tue May 03, 2011 10:42 am
Forum: General
Topic: SSH bug - ROS version 5.0rc10 and rc11
Replies: 16
Views: 2725

Re: SSH bug - ROS version 5.0rc10 and rc11

Clearing the configuration of /user ssh-keys fixed the problem. Upgrade to 5.x, then downgrade to 4.17, then clear configuration [admin@MikroTik] > /user ssh-keys print # USER KEY-OWNER error - contact MikroTik support and send a supout file (2) [admin@MikroTik] > ip service print detail Flags: X -...
by mangust
Thu Apr 28, 2011 12:19 pm
Forum: General
Topic: v5.2 released
Replies: 161
Views: 30012

Re: v5.2 released

RB750, V5.2.

Cant see the stat of the "slave" interfases:
WAN - out interface
LAN - is the Master Port, all other slaves.

Is it Ok ?
by mangust
Sun Mar 27, 2011 1:25 pm
Forum: General
Topic: USER-MANAGER in MikroTik v5rc11 - x86 [WHEN...?!]
Replies: 8
Views: 1629

Re: USER-MANAGER in MikroTik v5rc11 - x86 [WHEN...?!]

:( user manager = mikrotik i'm waiting...................................... for it waiting for v5 RC11........................................ Did you try to find answer via search on forums? There are around 5 answers on this question. In short: Ask support@mikrotik.com for rc12 or v5 final. Ex: ...
by mangust
Wed Mar 16, 2011 7:32 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 14271

Re: v5rc11 is out!

/tool e-mail set server=X.X.X.X from=zzz Not work any more. Instead of v4.x i should use /tool e-mail set address=X.X.X.X from=zzz Is it Bug? It is not specifically for RC11. From 4.x to 5.x, this has changed as far as I know. Ok, But next is a bug: /ip service enable www Don't work while ipv6 pack...
by mangust
Tue Mar 15, 2011 4:34 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 14271

Re: v5rc11 is out!

in V4.x
/tool e-mail set server=X.X.X.X from=zzz
in v5.rc11
/tool e-mail set address=X.X.X.X from=zzz

>http server & https server on MT don't work without IPV6 package.
/ip service enable www
Don't work while ipv6 package is not activated
Is It bugs?
Any comments from MT stuff ?
by mangust
Mon Mar 14, 2011 6:41 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 14271

Re: v5rc11 is out!

/tool e-mail set server=X.X.X.X from=zzz
Not work any more.
Instead of v4.x i should use

/tool e-mail set address=X.X.X.X from=zzz

Is it Bug?

http server & https server on MT don't work without IPV6 package.
Is it Bug?
by mangust
Tue Mar 08, 2011 11:56 am
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 14271

Re: v5rc11 is out!

usermanager still not working on this version!!
.....
what should i do...
Yes, during last minute before release, small problem prevented User manager package for X86 to be built correctly. We have fixed this for next release. Other platforms work
by mangust
Tue Mar 01, 2011 10:22 pm
Forum: Forwarding Protocols
Topic: check-gateway more than each 10s.
Replies: 3
Views: 3638

Re: check-gateway more than each 10s.

hi mangust .
i use that ,
...
and put on scheduler wich 25s interval.
THX, will try to use it.
by mangust
Tue Mar 01, 2011 1:05 pm
Forum: General
Topic: v5rc10 released
Replies: 77
Views: 9134

Re: v5rc10 released

rc10 is very good
Hope it is last RC in V5. :)
by mangust
Mon Feb 28, 2011 10:07 am
Forum: Forwarding Protocols
Topic: check-gateway more than each 10s.
Replies: 3
Views: 3638

Re: check-gateway more than each 10s.

AnyOne?
by mangust
Fri Feb 25, 2011 5:28 pm
Forum: Forwarding Protocols
Topic: check-gateway more than each 10s.
Replies: 3
Views: 3638

check-gateway more than each 10s.

check-gateway: "Periodically (every 10 seconds) check gateway by sending either ICMP echo request (ping) or ARP request (arp). If no response from gateway is received for 10 seconds, request times out. After two timeouts gateway is considered unreachable. After receiving reply from gateway it is con...
by mangust
Mon Feb 14, 2011 3:07 pm
Forum: General
Topic: queue simple drop packet - how to fix that?
Replies: 6
Views: 2898

Re: queue simple drop packet - how to fix that?

Hi, 'limit-at' is CIR in MT naming convention. It means that data rate is guaranteed to a target. In your case with limit-at=15M and max-limit=30M customer has guaranteed bandwith 15Mb/s and 30Mb/s maximum when bandwith is available. P2P opens a lot of connections, so IMHO you should also set pfifo...
by mangust
Sat Feb 12, 2011 12:28 pm
Forum: General
Topic: queue simple drop packet - how to fix that?
Replies: 6
Views: 2898

Re: queue simple drop packet - how to fix that?

Wiki says:
Set pfifo-limit=500 and observe results.
Regards,
Thx.

What about limit-at=0/0 ?
Should I set it to half of max-limit ?
I mean: does limit-at=15M "help me" in case if i use max-limit=30M ?
by mangust
Fri Feb 11, 2011 11:01 pm
Forum: General
Topic: queue simple drop packet - how to fix that?
Replies: 6
Views: 2898

Re: queue simple drop packet - how to fix that?

What about limit-at=0/0 ? Is it Ok for such speeds?
I use ethernet-default (kind=pfifo pfifo-limit=50) to shape this customer.
Is it ok for 30Mbit/s shape?
by mangust
Fri Feb 11, 2011 8:42 pm
Forum: General
Topic: queue simple drop packet - how to fix that?
Replies: 6
Views: 2898

queue simple drop packet - how to fix that?

Hi. I have one router which is connect to my backbone by 100Mbit/s channel. However I would like to limit one customer on that router to 30 Mbit/s. This customer has specific p-2-p traffic that is around 25-30Mbit full-duplex. So , I’ve create smple q for that: [admin@xxx] /queue simple> print Flags...
by mangust
Fri Feb 11, 2011 12:16 pm
Forum: General
Topic: RouterOS v5rc9
Replies: 108
Views: 11560

Re: RouterOS v5rc9

restore button is not missing, it's moved to "right click menu", so you don't accidentally click it.
"right click menu" ?? Can't find it there :(
by mangust
Thu Feb 10, 2011 3:48 pm
Forum: General
Topic: 5.0rc7 ssh crashes on RB433 - bugreport?
Replies: 14
Views: 2765

Re: 5.0rc7 ssh crashes on RB433 - bugreport?

Any comments about next posts?
viewtopic.php?&p=246580&f=1#p246580
Weekend has gone, lets continue:

The user above is right, the same effect exists in rc8. Not only for user= but for all options within the /system ssh context, so they are: port, address, and user.
The same for RC9
by mangust
Tue Feb 08, 2011 3:03 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 19891

Re: RouterOS v5rc8

What is your ticket number ?
My "port flapping ticket number": Ticket#2011020766000518
by mangust
Mon Feb 07, 2011 4:08 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 5969

Re: several interface problems on 5.0rc8 + intel Core i5+H67

а чем тебя 7-я и 5-я RC версии не устраивают ?? там все теже драйвера, но работают они месяцами без проблем Пробовал и 5 и 7 - теже грабли, если использовать указанное железо. При этом, на Core2Duo+chipset X58 - все нормально. Я же написал - нет смысла ожидать поддержки самого нового хардваре (CPU:...
by mangust
Sat Feb 05, 2011 9:46 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 19891

Re: RouterOS v5rc8

User Manager 5rc8 x86 working or no ?
http://forum.mikrotik.com/viewtopic.php ... =1#p248349
by mangust
Sat Feb 05, 2011 8:05 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 5969

Re: several interface problems on 5.0rc8 + intel Core i5+H67

Some addition detail: integrated lan chip is Intel 82579V.

Another news: after i turn off "Multi CPU" - the system goes without interface resets, but only pcie card. Integrated card - still not detected.
Do not use "latest" hardware.
No chance ... At least now.
by mangust
Sat Feb 05, 2011 12:31 am
Forum: General
Topic: 5.0RC5 Ethernet ports flapping on two different RB-750s
Replies: 31
Views: 9188

Re: 5.0RC5 Ethernet ports flapping on two different RB-750s

Do mikrotik have a fix for this yet, or even know the cause ???
Nick.
I can confirm this bug on new rb750.
Firmware 2.28, rc8.

How we can help MT to reproduce this bug?
I can give an access to router (that is located in Latvia).
by mangust
Thu Feb 03, 2011 11:18 am
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 19891

Re: RouterOS v5rc8

I've noticed that while using the terminal inside the winbox session and pressing tab command for command completion the behaviour is strange e.g. /system ssh user[then pressing TAB to complete the word user=] I get 'user%'. Anyone noticed this ? Looks like IP6 is anywhere :) [admin@demo2.mt.lv] > ...
by mangust
Tue Feb 01, 2011 4:34 pm
Forum: Forwarding Protocols
Topic: How to filter BGP route via AS number?
Replies: 3
Views: 4223

Re: How to filter BGP route via AS number?

The same as on cisco /routing filter add chain=bgp-in bgp-as-path=^555$ action=accept add chain=bgp-in bgp-as-path=^555$ action=accept and add chain=bgp-in action=reject To reject all other routes? P.S Do you have an idea why i can not see in routing table prefixes whitch is describe by 2,3 and 4 r...
by mangust
Tue Feb 01, 2011 3:38 pm
Forum: Forwarding Protocols
Topic: How to filter BGP route via AS number?
Replies: 3
Views: 4223

How to filter BGP route via AS number?

Hi. I've created bgp filter with next rules: 0 chain=peer-in prefix=0.0.0.0/0 invert-match=no action=accept 1 chain=peer-in prefix=x.x.x.x/22 invert-match=no action=accept 2 chain=peer-in prefix=y.y.y.y/22 invert-match=no action=accept 3 chain=peer-in prefix=z.z.z.z/22 invert-match=no action=accept ...
by mangust
Wed Jan 26, 2011 6:08 pm
Forum: General
Topic: v5rc7 released
Replies: 95
Views: 16542

Re: v5rc7 released

Winbox (IP Filter, NAT or Mangle)
Looks like this problem only for read only access. So, don't knew this is bug or not (please confirm).

1. Choose any rule.
2. "Divide" a rule line by two parts (50/50%).
3. Now, If you dobleclick on lower "half" (under red line) then you get error.
by mangust
Tue Jan 25, 2011 11:05 pm
Forum: General
Topic: v5rc7 released
Replies: 95
Views: 16542

Re: v5rc7 released

I've noticed that while using the terminal inside the winbox session and pressing tab command for command completion the behaviour is strange e.g. /system ssh user[then pressing TAB to complete the word user=] I get 'user%'. Anyone noticed this ? [admin@demo2.mt.lv] > /system ssh some.internet.site...
by mangust
Sat Jan 22, 2011 5:50 pm
Forum: Scripting
Topic: Trouble with backup script
Replies: 5
Views: 940

Re: Trouble with backup script

Anyone?
by mangust
Fri Jan 21, 2011 4:10 pm
Forum: Scripting
Topic: Trouble with backup script
Replies: 5
Views: 940

Re: Trouble with backup script

This works for me, However ... This script create backup file each time, but send and remove backup file only each second time. Anybody knows why? P.S Does anybody have example how to move backup file to ftp server? It' looks like some kind of bug for me because: I have tried to use example from ht...
by mangust
Fri Jan 21, 2011 3:12 pm
Forum: Scripting
Topic: Trouble with backup script
Replies: 5
Views: 940

Re: Trouble with backup script

/system script add name=ebackup policy=ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive source="/system backup save name=([/system ident\ ity get name] . \"-\" . \\\r\ \n[:pick [/system clock get date] 7 11] . [:pick [/system clock get date] 0 3] . [:pick [/system clock get date] 4...
by mangust
Thu Jan 13, 2011 12:11 am
Forum: General
Topic: v5rc7 released
Replies: 95
Views: 16542

Re: v5rc7 released

1.
hmm... can't connect to demo2.mt.lv via winbox...
2.
http://forum.mikrotik.com/viewtopic.php ... =1#p243721
Is it ok (interface unknown)?
by mangust
Wed Jan 05, 2011 11:33 pm
Forum: General
Topic: v5rc7 released
Replies: 95
Views: 16542

Re: v5rc7 released

ppp-scaner ... Scan what for ???
by mangust
Thu Dec 30, 2010 1:37 pm
Forum: General
Topic: v5rc7 released
Replies: 95
Views: 16542

Re: v5rc7 released

which one?
Think he is talking about next post:

http://forum.mikrotik.com/viewtopic.php?f=1&t=47794
by mangust
Mon Dec 27, 2010 7:12 pm
Forum: General
Topic: v5rc6 released
Replies: 107
Views: 17772

Re: v5rc6 released

Unknown group demo ...
by mangust
Mon Dec 27, 2010 10:29 am
Forum: General
Topic: v5rc6 released
Replies: 107
Views: 17772

Re: v5rc6 released

there is stable version v4, and on all mission critical routers this is the way to go, New Intel 1G card, SSTP, RPS, GRE? so what do you want, new features or stability? you are contradicting yourself. Normis, ROS is software that is provided by MT, so you should do, what you want (not me :) ). And...
by mangust
Sat Dec 25, 2010 11:01 pm
Forum: General
Topic: v5rc6 released
Replies: 107
Views: 17772

Re: v5rc6 released

there is stable version v4, and on all mission critical routers this is the way to go,
New Intel 1G card, SSTP, RPS, GRE?
by mangust
Sat Dec 25, 2010 9:24 pm
Forum: General
Topic: v5rc6 released
Replies: 107
Views: 17772

Re: v5rc6 released

Any ideas when DHCPv6 will be implemented? It is in TODO list and should be ready until final v5 is released. You can easily start to deploy IPv6 even without DHCPv6, use stateless address autoconfiguration. To MT: First of all I would like to say thanks for your job. You doing very useful job for ...
by mangust
Fri Dec 17, 2010 6:57 pm
Forum: General
Topic: Feature requests
Replies: 1163
Views: 212709

Re: Feature requests

max conntrack number depends on free resources on the router, more RAM more entries available. Looks like it limited ... Because x86 with 2G RAM, and RB1100 with 512 Mb RAM has the same Value - 524288. May be a good idea to have a way (like example: from console only) to increase it. The value of 5...
by mangust
Fri Dec 17, 2010 6:33 pm
Forum: General
Topic: TTL exceeded in transit
Replies: 2
Views: 4527

Re: TTL exceeded in transit

This is proper traceroute behavior. Read below for more info.
How does traceroute work?
Thank you.
by mangust
Fri Dec 17, 2010 1:29 pm
Forum: General
Topic: TTL exceeded in transit
Replies: 2
Views: 4527

TTL exceeded in transit

I Have a question to MT team/gurus.
Why wireshark (sniffer) shows me "TTL exceeded" in case of traceroute from my PC (192.168.200.254)
Is it Normal? Loks like TTL setup to 1 (???)
Could somebody from MT check this. This is valid for 4.x and 5x. version.
by mangust
Mon Dec 13, 2010 10:07 pm
Forum: General
Topic: Feature requests
Replies: 1163
Views: 212709

Re: Feature requests

Is there way to change max conntrack number in /proc/net/ip_conntrack in feature releases?
BTW. What is the max conntrack number for 4.x and for 5.x?
by mangust
Mon Dec 06, 2010 11:36 pm
Forum: General
Topic: Feature requests
Replies: 1163
Views: 212709

Re: Feature requests

1. backup_filename=Identity-date. isn't it exactly like that now?.. Nope . For now Identity=Mikrotik. If somebody don't have special command or script to make backup (like me :) ) and use drag&drop to download backup , then it's always need to rename backup localy (on PC). 2. Possibility to reverse...
by mangust
Thu Dec 02, 2010 12:42 pm
Forum: General
Topic: Reveres interface graph
Replies: 4
Views: 665

Re: Reveres interface graph

RouterOS is not not an ultimate monitoring tool. Graphs show simple interface upload and interface download. If you want more advanced functionality you can use your mentioned cacti.
This was just a question ...
by mangust
Thu Dec 02, 2010 11:35 am
Forum: General
Topic: Reveres interface graph
Replies: 4
Views: 665

Re: Reveres interface graph

That cannot be changed and graphs are correct.
It's correct. This not the question.

But cacti and mrtg can do that - it's just one option in mrtg/cacti config file.
by mangust
Thu Dec 02, 2010 10:42 am
Forum: General
Topic: Reveres interface graph
Replies: 4
Views: 665

Reveres interface graph

Hi, I've already asked this on "BETA tree" , but ... Is there a way to reverse interface graph ? I mean - I have WAN graph - which is correct (green download , blue upload), I have two Lans witch graphs is reversed (green upload, blue download) Is there a way to set "correct" colors for Lans interfa...
by mangust
Wed Dec 01, 2010 9:36 am
Forum: General
Topic: Feature requests
Replies: 1163
Views: 212709

Re: Feature requests

1. backup_filename=Identity-date.
2. Possibility to reverse interface speed graphics - I mean make Upload=Downlad, and Download=Upload for specific interface.
by mangust
Mon Nov 29, 2010 5:26 pm
Forum: General
Topic: RouterOS v5.0 RC4
Replies: 72
Views: 15278

Re: RouterOS v5.0 RC4

I send extended mail to support without supout.rif - I can not save it without network. 8)
make supout.rif on 5.x, downgrade do 4.x , send to MT Team :)
by mangust
Wed Nov 24, 2010 10:18 am
Forum: General
Topic: Two problems with shaper in 5.0RC4
Replies: 19
Views: 2578

Re: Two problems witch shaper in 5.0RC4

I have a similar problem.
Very often Tools/Graphing/Interface Graph not displayed Interface (for which statistics are collected).
So , I need to to watch it thru www.
This happens for all versions - 3.x, 4.x, 5.x ...
Maybe I just dnot know right way to "refrash" winbox window ...
by mangust
Tue Nov 23, 2010 11:32 am
Forum: General
Topic: RouterOS v5.0 RC4
Replies: 72
Views: 15278

Re: RouterOS v5.0 RC4

RB750:
by mangust
Fri Nov 12, 2010 2:32 pm
Forum: General
Topic: Any ETA about the ospf crash in Ros 5x?
Replies: 2
Views: 1095

Re: Any ETA about the ospf crash in Ros 5x?

Have anyone feedback about ospf and v5RC3?
Is it stable? Is there any known bugs about ospf in v5?
by mangust
Fri Nov 12, 2010 1:39 pm
Forum: General
Topic: MK v5 rc3 x86 - bug torch
Replies: 8
Views: 3062

Re: MK v5 rc3 x86 - bug torch

it will be fixed in rc4 as patch is already done
Is there any date for RC4?
Will it be accessible till holidays :wink: ?

What do you think about final release? Does v5 looks pretty stable now ?
by mangust
Wed Oct 27, 2010 5:26 pm
Forum: General
Topic: Ping in script problem
Replies: 55
Views: 13167

Re: Ping in script problem

Found it. :D
Found what?
There is no "offical" RC2. Is'n it?
by mangust
Thu Oct 21, 2010 10:16 am
Forum: General
Topic: MK v5 rc1 - bug torch
Replies: 33
Views: 7075

Re: MK v5 rc1 - bug torch

just wait :)
Sorry for flame ... :D
But Just gimme something new to test ... :shock:
by mangust
Wed Oct 13, 2010 7:06 pm
Forum: General
Topic: MK v5 rc1 - bug torch
Replies: 33
Views: 7075

Re: MK v5 rc1 - bug torch

.... Then I downgraded to rc1 because some problems with ospf.
Did you report about ospf bug? Because i'm intrested to use RC2 with ospf ...
by mangust
Mon Oct 11, 2010 5:48 pm
Forum: General
Topic: BUG: Bridge filtering in 5.0RC1 is broken?
Replies: 9
Views: 3091

Re: BUG: Bridge filtering in 5.0RC1 is broken?

So stop yelling ...
+1
Looking forward for RC2. :-P
by mangust
Fri Sep 24, 2010 12:01 pm
Forum: General
Topic: RouterOS v5 RC1
Replies: 82
Views: 18790

Re: RouterOS v5 RC1

Normis,
Could you please briefly summarize problem (major) that you can confirm for RC1?
by mangust
Wed Sep 22, 2010 10:56 am
Forum: General
Topic: RouterOS v5 RC1
Replies: 82
Views: 18790

Re: RouterOS v5 RC1

And another bug - on x86 multicore cpu and intel ethernet with many queue when run "profile" - router reboot. Already send supout
How many queue should be?
I'm going to use 30-50 simple queue rules.
by mangust
Tue Sep 21, 2010 10:11 am
Forum: General
Topic: RouterOS v5 RC1
Replies: 82
Views: 18790

Re: RouterOS v5 RC1

1. found some bug with RPS - recomended to disable RPS in this version
2.And RC1 still has bug with torch on intel ethernet.
Could you be more specific?

I'm not going to use "connection tracking" in my configuration.
Should RPS help me or it works only for connection tracking?
by mangust
Wed Sep 15, 2010 12:38 pm
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 23064

Re: RouterOS v5 beta 6

we have some complications with one big change, we are still working on it.
Normis you are the BOSS… However, ROS is not OS for Wireless only, give us a chance to test BGP, QOS and other functions on high-load X86 systems with new Intel chipsets , I’m really waiting for this from 5B2.
by mangust
Wed Sep 15, 2010 11:20 am
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 23064

Re: RouterOS v5 beta 6

When next version is coming as per normis mikrotik is supposed to release this week.
+1
by mangust
Thu Sep 09, 2010 3:43 pm
Forum: Forwarding Protocols
Topic: default route thru received by OSPF network
Replies: 6
Views: 1757

Re: default route thru received by OSPF network

Hmm ... The Script work fine.
But... How I can start it "automaticaly" ?
by mangust
Tue Sep 07, 2010 5:16 pm
Forum: Forwarding Protocols
Topic: default route thru received by OSPF network
Replies: 6
Views: 1757

Re: default route thru received by OSPF network

...
Adjust the script for your needs
Thanks a lot !!!
by mangust
Tue Sep 07, 2010 11:50 am
Forum: Forwarding Protocols
Topic: default route thru received by OSPF network
Replies: 6
Views: 1757

Re: default route thru received by OSPF network

You can run a script that enables static default route if specific ospf route is present in routing table. However it is not necessary. Proper configuration would be to set OSPF on both gateways to distribute default route. OSPF will automatically switch to other gateway if primary fails. hmm... Sc...
by mangust
Tue Sep 07, 2010 10:35 am
Forum: Forwarding Protocols
Topic: default route thru received by OSPF network
Replies: 6
Views: 1757

default route thru received by OSPF network

I have OSPF router. Let’s say I’ve receive 192.168.100.0/24 thru OSPF (this is not link network). And … There is a reason why I cannot receive default route on my OSPF router. Is there a way to setup static default route in case if I have 192.168.100.0/24 in routing table? I setup “ip route add gate...
by mangust
Fri Sep 03, 2010 1:21 pm
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 23064

Re: RouterOS v5 beta 6

What's new in 5.0beta6 (2010-Aug-10 13:22): .... *) intel 82576 (uncommon expensive chip) crash/reboot to be fixed in next release .... Any news about next release :) ? OK, Looks like it’s a problem to get stable BETA in nearest feature. Could somebody suggest me 4GB port adapter, which can be supp...
by mangust
Wed Aug 25, 2010 5:32 pm
Forum: General
Topic: Possible memory leak configuration in beta version
Replies: 8
Views: 1823

Re: Possible memory leak configuration in beta version

Thank you for information sstp memory leak is reproduced.
We are ready for new beta :wink:
When it can be expected?
by mangust
Fri Aug 20, 2010 9:52 am
Forum: General
Topic: Possible memory leak configuration in beta version
Replies: 8
Views: 1823

Re: Possible memory leak configuration in beta version

Uldis,
The simplest way to detect leak (imho), ask community about access to the problematic router.
I think that MT has special package that can quickly detect the leak.
As an idea you can create package that can show how many memory each process use.
by mangust
Wed Aug 18, 2010 9:50 am
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 23064

Re: RouterOS v5 beta 6

What's new in 5.0beta6 (2010-Aug-10 13:22):
....
*) intel 82576 (uncommon expensive chip) crash/reboot to be fixed in next release
....
Any news about next release :) ?
by mangust
Thu Aug 12, 2010 2:06 pm
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 23064

Re: RouterOS v5 beta 6

more practical would be to use a script that saves with custom name and automatically emails you the files :) /system backup save name=whatyouwant but I will see if we can change the default name to the identity name + timestamp for example. It's all true. But sometimes I'm too lazy to write a such...
by mangust
Thu Aug 12, 2010 12:02 pm
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 23064

Re: RouterOS v5 beta 6

Feature request:
Backup file should have hostname instead of "Mikrotik-" (or option to do that).
I use arag & drop to save backup configs and tired to rename backup file :).
by mangust
Mon Aug 09, 2010 9:22 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36803

Re: Ros V5 beta new intel drivers

2 mangust - yes, but this magic command not need on heavy loaded routrer, because CPU load will be 100%. MSI need many cpu core, in other way you can use V4
a) V4 do not support new Intel chipsets (igb driver).
b) I suggest this command only as a workaround until some stable solution...
by mangust
Fri Aug 06, 2010 4:18 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36803

Re: Ros V5 beta new intel drivers

IMHO: After days of googling I’ve decide that MSI/ksoftirqd are too fresh for v.5 Beta. Looks like v5 really need support of new Intel chipsets, but support for MSI can wait. If MT do not find way to fix kernel crash (what is starts from 5.0beta3 - 2010-Jun-17) in nearest mouth, then may be it will ...
by mangust
Thu Aug 05, 2010 10:19 am
Forum: General
Topic: RouterOS 5 beta 5
Replies: 22
Views: 6472

Re: RouterOS 5 beta 5

That is normal for x86 as disable-running-check=yes is set by default.
Oppss, You right...
What is the command to make "disable-running-check=no"?
by mangust
Wed Aug 04, 2010 4:08 pm
Forum: General
Topic: RouterOS 5 beta 5
Replies: 22
Views: 6472

Re: RouterOS 5 beta 5

Incorrect status of the interfaces: all interfaces are "running" even if nothing connected.
by mangust
Tue Aug 03, 2010 10:50 am
Forum: General
Topic: RouterOs 5b5 memory leak
Replies: 10
Views: 1887

Re: RouterOs 5b5 memory leak

the memory counts down from 750 meg and when it gets to 12 meg Do not panic. May be it's because of some specific package that you use. In any case ... I think that if you create a ticket and send suppout.rif then MT will have a chance to check what kind of package (process) use a lot of memory. Wi...
by mangust
Mon Aug 02, 2010 10:09 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36803

Re: Ros V5 beta new intel drivers

yes it still drops the links after a while like beta 4
It's just drop links or reboot the router also?
What is your status of watchdog (On or OFF)?
by mangust
Sun Jul 25, 2010 10:19 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36803

Re: Ros V5 beta new intel drivers

on 5v beta4 queue on intel nics work better, if enable queue tree router just reboot, but dont kernel panic
Any feedback for 5B5?
by mangust
Tue Jul 20, 2010 1:36 pm
Forum: General
Topic: Possible security issue
Replies: 14
Views: 2156

Re: Possible security issue

http://www.theregister.co.uk/2010/07/19/home_router_hack/ Not sure about the question, but next features will be very useful: a)IP Sevices: make access more then from “one place”. b)DNS: make access restrictions via IP (or ip list). It’s possible to make restriction via firewall, but this feature c...
by mangust
Mon Jul 19, 2010 4:47 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36803

Re: Ros V5 beta new intel drivers

still strange...
May be it's only for some specific Intel chips, (for example with MSI support)
What kind of Intel card do you use?

One more thing: I believe that MT Team know this problem...
Because if not, they asked me to send them support.rif ...
by mangust
Mon Jul 19, 2010 10:13 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36803

Re: Ros V5 beta new intel drivers

strange, here i have about 270 simple queues and no reboot yet ( x86) and intel nics
It's only for 5B4. Believe me :(
by mangust
Thu Jul 15, 2010 6:38 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36803

Re: Ros V5 beta new intel drivers

on 5v beta4 queue on intel nics work better, if enable queue tree router just reboot, but dont kernel panic I can confirm that my x86 has been rebooted on next sec, after I applied first simple queue rule. Router started to reboot once again after reboot. The only one way to stop that was quickly l...
by mangust
Thu Jul 15, 2010 12:31 pm
Forum: General
Topic: RouterOS v5 beta4 released
Replies: 48
Views: 11332

Re: RouterOS v5 beta4 released

OK, we will think about it. Thanks for the suggestions. [user@xxx] > export ....... /system resource irq set (unknown) cpu=auto set (unknown) cpu=auto set (unknown) cpu=auto set (unknown) cpu=auto set (unknown) cpu=auto set (unknown) cpu=auto set (unknown) cpu=auto set (unknown) cpu=auto set (unkno...
by mangust
Wed Jul 14, 2010 11:11 am
Forum: General
Topic: SSH and FTP dies after a while
Replies: 9
Views: 1882

Re: SSH and FTP dies after a while

send to support please
Ticket#2010071466000159
by mangust
Wed Jul 14, 2010 10:20 am
Forum: General
Topic: SSH and FTP dies after a while
Replies: 9
Views: 1882

Re: SSH and FTP dies after a while

re-enabled how? make supout.rif file when they are "not working" please. Confirm. I have support.rif Should I attach it here ? :) [xxx] > ip service print Flags: X - disabled, I - invalid # NAME PORT ADDRESS CERTIFICATE 0 telnet 23 0.0.0.0/0 1 X ftp 21 0.0.0.0/0 2 X www 80 0.0.0.0/0 3 ssh 22 0.0.0....
by mangust
Tue Jul 06, 2010 12:35 pm
Forum: General
Topic: RouterOS v5 beta4 released
Replies: 48
Views: 11332

Re: RouterOS v5 beta4 released

Then I Try to make ssh from router (5B4) - I see next "debug" : client version: SSH-2.0-OpenSSH_4.3p2 Debian-9etch2 transport state: 0 --> 1 kex algo: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-he llman-group1-sha1 host key algo: ssh-rsa,ssh-dss enc algo CS: aes128-cbc,3de...
by mangust
Tue Jun 29, 2010 12:11 pm
Forum: General
Topic: RouterOS 5 beta
Replies: 97
Views: 18943

Re: RouterOS 5 beta

Seems that IRQ balancer & PCI MSI are not pretty stable.
I'd also read about memory usage problem in Beta 3.
I need to decide what to use. Really need MSI , but looks that B2 is more stable.
Normis – Are you going to provide b4 in NEAREST feature?
by mangust
Wed Jun 16, 2010 10:46 am
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45057

Re: MikroTik RouterOS version 5.0beta2 released!

Maybe finally need to upgrade :)?
Image
I have the same situation with manual home page on my ROS 4.x & Winbox 2.2.16.
Then I push "Manual" button , I always forwarded to "http://www.mikrotik.com/testdocs/ros/2.9/"

What I should to upgrade?
by mangust
Tue Jun 08, 2010 3:07 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45057

Re: MikroTik RouterOS version 5.0beta2 released!

no matter how small that thing is, it needs driver.
OK, I get it . :wink:
It's just a question - Are you going to support it?
Do you think it's can be useful?
by mangust
Tue Jun 08, 2010 2:37 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45057

Re: MikroTik RouterOS version 5.0beta2 released!

:shock: First implement Soundblaster-Driver. I want a quadrophonic Star-Trek sound
when wlan thruput crosses Lightspeed (100Mbit). :)
What so funny? 60-70% of keyboards and mouses use wireless. Sometimes it just small USB stick and keyboard/mouse.
Once againe - it's very useful.
by mangust
Tue Jun 08, 2010 12:14 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45057

Re: MikroTik RouterOS version 5.0beta2 released!

what makes you think it should work? wireless keyboards need some sort of driver for the transmitter dongle
It can be very useful for x86 platforms.
by mangust
Tue Jun 08, 2010 12:05 pm
Forum: Forwarding Protocols
Topic: Bounding and active-backup configuration.
Replies: 3
Views: 3951

Re: Bounding and active-backup configuration.

actually, it's b on ding, not bounding =) yes, VLANs work perfectly over bonding interface Ok, thank you for answers. The one thing remained not clear to me: I need, that a traffic goes only through one interface (in my case ethernet1). From the Manual: >active-backup >This mode uses only one activ...
by mangust
Tue Jun 08, 2010 11:32 am
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45057

Re: MikroTik RouterOS version 5.0beta2 released!

1. Logitech wireless USB keybord do not work. (I've tried two different keyboards)
2. Does not show host IP if host is inaccessible
by mangust
Wed Jun 02, 2010 2:43 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36803

Re: Ros V5 beta new intel drivers

Sorry, for offtipoc, but does MT going to support igb driver in ROS 4.x?
Looks like it better to use stables ROS version. And I've bought the card (E1G44ETBLK) already.

Ready to provide this card for testing to MT Team (if this needed).
by mangust
Thu May 20, 2010 9:37 am
Forum: General
Topic: RB1100 Manual Q.
Replies: 3
Views: 4632

Re: RB1100 Manual Q.

thx
by mangust
Wed May 19, 2010 3:48 pm
Forum: General
Topic: RB1100 Manual Q.
Replies: 3
Views: 4632

RB1100 Manual Q.

Hello all. Why are "bypass" plugs needed in RB1100? What for jumper in front pannel? Has RB1100 more powerful then 1000U? I've read that RB1100 sould has 1000Mhz CPU instead of RB1000U (that has 1300Mhz). But... > system resource print cpu: "e500v2" cpu-count: 1 cpu-frequency: 799MHz Is there some p...
by mangust
Thu May 13, 2010 1:31 pm
Forum: Forwarding Protocols
Topic: Bounding and active-backup configuration.
Replies: 3
Views: 3951

Bounding and active-backup configuration.

Hello all. Does anybody can provide me right example about bounding configuration. I Have two Core switches. I would like to setup ROS box and connect it to different switches. ethernet 1 should be "Master", but for some reasone Master interface is ethernet2. Why? What settings for slaves= and prima...
by mangust
Mon Apr 12, 2010 10:30 pm
Forum: Forwarding Protocols
Topic: policy roting for masq and non-masq networks.
Replies: 1
Views: 644

policy roting for masq and non-masq networks.

Hello. 1) I try to test source routing configuration. Is there any difference in configuration for: a) network that should be Masq ? b) network that should not be Masq ? I mean: Should I use mangle for network that is not MASQ or "ip route rule action=lookup src-adress=..." will enough? 2) http://bl...
by mangust
Fri Feb 26, 2010 12:58 pm
Forum: Forwarding Protocols
Topic: routing ospf interface instance-id what for?
Replies: 2
Views: 5567

Re: routing ospf interface instance-id what for?

I hope this clarified some of it for you.
Yes. Loks like i's much more clear for me now.
Thanks.
by mangust
Wed Feb 24, 2010 6:55 pm
Forum: Forwarding Protocols
Topic: routing ospf interface instance-id what for?
Replies: 2
Views: 5567

routing ospf interface instance-id what for?

HI, Try to setup second instance on my test ospf router (ROS 4.5)... Instance with name ospf1 has "id =1" [admin@MT1] > routing ospf instance print detail Flags: X - disabled 0 name="default" router-id=10.0.2.1 distribute-default=never redistribute-connected=as-type-1 redistribute-static=no redistri...
by mangust
Mon Feb 22, 2010 6:27 pm
Forum: Forwarding Protocols
Topic: BGP - right way to redestribute over AS'es
Replies: 1
Views: 667

BGP - right way to redestribute over AS'es

I've create a lab with "classic BGP topology" -> AS40002-AS40001-AS40003 Here ismy BGP config from AS40001 router: [admin@MT-Test-AS1] > routing bgp peer print detail Flags: X - disabled, E - established 0 E name="AS-40002" instance=default remote-address=172.16.1.2 remote-as=40002 tcp-md5-key="" ne...
by mangust
Mon Feb 22, 2010 6:23 pm
Forum: Forwarding Protocols
Topic: BGP - Default Originate function.
Replies: 4
Views: 3946

BGP - Default Originate function.

I've create a lab with "classic BGP topology" -> AS2-AS1-AS3

I want to get default route on my AS2 router (from AS1)
To make that, I create "static route (blackhole)" 0.0.0.0/0 on AS1. Whithout that "Default Originate" from AS1 not working.
Is it right way or there is some "hint" about this?

WBR.
by mangust
Mon Feb 22, 2010 6:19 pm
Forum: Forwarding Protocols
Topic: BGP - "Remove Private AS" function
Replies: 2
Views: 1547

BGP - "Remove Private AS" function

I can’t find anything regarding "Remove Private AS" function?
Could anybody give me a brief explanation about this function?
by mangust
Mon Feb 22, 2010 4:17 pm
Forum: Forwarding Protocols
Topic: soft-reconfiguration command for BGP
Replies: 5
Views: 2258

Re: soft-reconfiguration command for BGP

Any Ideas?
by mangust
Mon Feb 22, 2010 2:36 pm
Forum: Forwarding Protocols
Topic: soft-reconfiguration command for BGP
Replies: 5
Views: 2258

Re: soft-reconfiguration command for BGP

http://wiki.mikrotik.com/wiki/BGP_soft_reconfiguration_alternatives_in_RouterOS Ok, Thank you, That's exactly what I need. There are some other questions about my "classic BGP topology" -> AS2-AS1-AS3 I want to have default route on my AS2 router (from AS1) To make that, I need to create "static ro...
by mangust
Sun Feb 21, 2010 7:18 pm
Forum: Forwarding Protocols
Topic: soft-reconfiguration command for BGP
Replies: 5
Views: 2258

soft-reconfiguration command for BGP

Is it possible?
by mangust
Thu Jan 28, 2010 12:38 pm
Forum: Scripting
Topic: how to disable all Vlan interface by one command
Replies: 3
Views: 1378

Re: how to disable all Vlan interface by one command

/interface vlan disable [find];
Thank you.
This is exactly what I want.
However looks like disable vlan Interface not enough. For some reason I can ping interface ip directly from the router.
Is It possible to disable all VLANs IP?
by mangust
Thu Jan 28, 2010 10:47 am
Forum: Scripting
Topic: how to disable all Vlan interface by one command
Replies: 3
Views: 1378

how to disable all Vlan interface by one command

Hello all.
Need to disable all VLAN interface by one command to put that into the script
Something like :
[admin@MikroTik] > interface vlan disable ...

how t do that ?
Thank you
by mangust
Mon Jan 18, 2010 1:43 pm
Forum: General
Topic: Traffic shaper in bridge mode - is that possible?
Replies: 4
Views: 681

Re: Traffic shaper in bridge mode - is that possible?

"/interface bridge filter" also has a mark-packet option that may suffice, saving resources since it doesn't require packets to traverse the IP firewall.
Lokks like that really mark packets, but then i put mark name into my simple queues rule - nothing happens.
Do i need anything alse to do?
by mangust
Mon Jan 18, 2010 1:41 pm
Forum: General
Topic: Traffic shaper in bridge mode - is that possible?
Replies: 4
Views: 681

Re: Traffic shaper in bridge mode - is that possible?

yes it's possible, here in the forum are examples, just search.. activate in bridge "use ip firewall" and test..
YESS.
It was exactly what I need.
Thank you.
by mangust
Fri Jan 15, 2010 6:10 pm
Forum: General
Topic: Traffic shaper in bridge mode - is that possible?
Replies: 4
Views: 681

Traffic shaper in bridge mode - is that possible?

Hello all.
I want to setup MT's two interfaces in bridge (transparent) mode and put all my clients’ traffic thru this bridge.
The main idea of that is create some shaping (per IP destination) policy for my customer.
Can the ROS do that?
Are there some working examples around?
by mangust
Mon Feb 02, 2009 9:32 am
Forum: Wireless Networking
Topic: ROS 3.20 Unknown frequencies
Replies: 1
Views: 490

ROS 3.20 Unknown frequencies

Hello all.
1) Any comments about attach?
2) After restore from backup the wireless card is disabling. As result I should to configure it once again. Is it BUG?
by mangust
Wed Dec 03, 2008 4:35 pm
Forum: General
Topic: Interface rate limit problem in 3.16
Replies: 5
Views: 618

Re: Interface rate limit problem in 3.16

...if you are sure that it should work =)
Do you think it should work?
by mangust
Wed Dec 03, 2008 11:45 am
Forum: General
Topic: Interface rate limit problem in 3.16
Replies: 5
Views: 618

Re: Interface rate limit problem in 3.16

these settings are only available on RBs with switch chip included. RB333 do not have that one
with limit issue - write to support, if you are sure that it should work =)
But what about mipsbe problem?
by mangust
Tue Dec 02, 2008 4:25 pm
Forum: General
Topic: Interface rate limit problem in 3.16
Replies: 5
Views: 618

Interface rate limit problem in 3.16

I’ve find two different problem of interface limit on my RBs

1pic. powerpc ROS (RB333) has not such function.
2pic. mipsbe ROS (RB493AH) can not provide limit speed more then 10 Mbit/s

Anybody can confirm that?
by mangust
Mon May 19, 2008 5:50 pm
Forum: General
Topic: DHCP option code 224-254 (privat use)
Replies: 13
Views: 7258

Re: DHCP option code 224-254 (privat use)

ROS version ?
3.9
Was the same problem with opt 242, until 3.0rc14, where
fixed bug - dhcp server failed to give out options with code > 127;
This also should be fixed in 2.9.51.

May be it's a new bug ?
by mangust
Mon May 19, 2008 10:22 am
Forum: General
Topic: DHCP option code 224-254 (privat use)
Replies: 13
Views: 7258

Re: DHCP option code 224-254 (privat use)

ROS version ?
by mangust
Fri May 16, 2008 3:08 pm
Forum: General
Topic: ip ipsec remote-peers print show only one peer
Replies: 0
Views: 757

ip ipsec remote-peers print show only one peer

HI I have 5 tunnels , regarding installed-sa all tunnels is up. But ip ipsec remote-peers print Show only one tunnel. Why? What does the next info mean ??? 14:02:20 ipsec,ike failed to recv from pfkey (Resource temporarily unavailable) Sometimes some SA expared but not estableshed 14:13:17 ipsec,ike...
by mangust
Sat May 10, 2008 11:45 am
Forum: General
Topic: ROS v3.9 THANK YOU
Replies: 6
Views: 1364

Re: ROS v3.9 THANK YOU

i've upgraded a 60 wireless bridges from 3.6 and 3.7 to 3.8
and now what? day after is 3.9 and again upgrade all
tired mt user :P
Just an advice :
Try to wait few days before upgrade one version and check forms for feedback... It's How I do that ...
by mangust
Wed Apr 30, 2008 1:57 pm
Forum: General
Topic: BUG **** RB150 + V3.7 Firmware Upgrade
Replies: 3
Views: 910

Re: BUG **** RB150 + V3.7 Firmware Upgrade

I believe I found a bug in V3.7 for RB150
http://forum.mikrotik.com/viewtopic.php?f=2&t=23184
(RB150 failure after BIOS Upgrade on 3.7)
by mangust
Mon Apr 28, 2008 1:30 pm
Forum: General
Topic: Pentium quad core
Replies: 9
Views: 1678

Re: Pentium quad core

No matter how much RAM u have it always shows that max entries: 524288 in ver 3.X. I'm using 3.7 with 1 GB RAM and it's showing the exact max entries. I don't think so... frm-MT.JPG Looks like this is starting from 3.3. The question is Does Max Entry mean Max Contrack or it’s just show amount of me...
by mangust
Fri Apr 25, 2008 2:56 pm
Forum: General
Topic: Pentium quad core
Replies: 9
Views: 1678

Re: Pentium quad core

I suggest you to run 3.7 version on both routers, then compare value. In case there are any similar problems, contact MikroTik support [support@mikrotik.com]. It's 100% bug. Not sure how many conntracks are supported , but the number really depend of amount of RAM. In MT case it' s always (I have i...
by mangust
Mon Apr 14, 2008 10:30 am
Forum: General
Topic: RB150 failure after BIOS Upgrade on 3.7
Replies: 8
Views: 1588

Re: RB150 failure after BIOS Upgrade on 3.7

Managed to recover RB150 into operational mode by dowgrading BIOS back to 2.12.
Thank you for instruction.
It does really help me to make router alive.
However it will be great to hear official notice from MT stuff about this.
Is it safe or not to upgrade on firmware 2.13 on all other boards?
by mangust
Fri Apr 11, 2008 2:58 pm
Forum: Beginner Basics
Topic: Second default for second WAN IP
Replies: 8
Views: 1798

Re: Second default for second WAN IP

you are not marking packets, only connection ? You need both. Post the following so we dont have to keep guessing: /ip route print detail /ip firewall mangle print Thx, Sam [admin@MikroTik] > /ip route print detail Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - ...
by mangust
Fri Apr 11, 2008 2:56 pm
Forum: General
Topic: RB150 failure after BIOS Upgrade on 3.7
Replies: 8
Views: 1588

RB150 failure after BIOS Upgrade on 3.7

Hi all. RB150 /system routerboard upgrade .... reboot RouterBOOT booter 2.13 RouterBoard miniROUTER CPU frequency: 175 MHz Memory size: 32 MB Press any key within 2 seconds to enter setup.. kernel not found trying bootp protocol...........................................................................
by mangust
Thu Apr 10, 2008 3:30 pm
Forum: Beginner Basics
Topic: Can ROS support H323 and over SNAT and DNAT?
Replies: 5
Views: 2636

Re: Can ROS support H323 and over SNAT and DNAT?

/ip firewall service-port
set h323 ports=YourServicePort 
you should enter your H.323 port
Witch one. How I can Check witch one is good for me?
I setup 1720 here but result is the same ?
by mangust
Thu Apr 10, 2008 1:27 pm
Forum: General
Topic: Policy Based Routing
Replies: 21
Views: 9191

Re: Policy Based Routing

[quote="thavinci"]Solved it..... Like you said ... /ip firewall mangle add chain=input action=mark-connection new-connection-mark=conn-mark-isp2 passthrough=yes in-interface=isp2 /ip firewall mangle add chain=output action=mark-routing new-routing-mark=routing-mark-isp2 passthrough=yes connection-ma...
by mangust
Thu Apr 10, 2008 1:23 pm
Forum: Beginner Basics
Topic: Second default for second WAN IP
Replies: 8
Views: 1798

Re: Second default for second WAN IP

Hello, The main problem you are experiencing is probably 2nd WAN isp doesnt allow you to source packets with IP addresses from the 1st isp (BCP 38 enforcement is good really). This probably only applies for pings and other packets coming directly to the router, winbox, etc. You need to mangle packe...
by mangust
Thu Apr 10, 2008 11:16 am
Forum: Beginner Basics
Topic: Can ROS support H323 and over SNAT and DNAT?
Replies: 5
Views: 2636

Re: Can ROS support H323 and over SNAT and DNAT?

yes, you have to enable the H323 in "/ip firewall service-port" Hmm looks like simple masq not enought for Voip. With next configuration I have only one way voice. :( [admin@MikroTik] > ip firewall service-port print Flags: X - disabled, I - invalid # NAME PORTS 0 X ftp 21 1 X tftp 69 2 X irc 6667 ...
by mangust
Wed Apr 09, 2008 7:06 pm
Forum: Beginner Basics
Topic: Second default for second WAN IP
Replies: 8
Views: 1798

Re: Second default for second WAN IP

If you want to control which traffic goes where, you have to use mangles and policy routing. There are examples in the Wiki. Hmm, The problem is that for me is not differences how to LAN traffic goes. I'm more interested in the WAN traffic. Looks like mangle and policy routing working only for LAN ...
by mangust
Wed Apr 09, 2008 4:56 pm
Forum: Beginner Basics
Topic: Second default for second WAN IP
Replies: 8
Views: 1798

Second default for second WAN IP

Hi all. There is router with 2 WAN ports (different ISP). I would like to have access for both WAN IPs. Basically I can access only for IP that has default (0.0.0.0/0) route. How I can make access for second WAN IP. I have found some documentation in manual about load balancing, but seems that examp...
by mangust
Wed Apr 09, 2008 11:29 am
Forum: Beginner Basics
Topic: Can ROS support H323 and over SNAT and DNAT?
Replies: 5
Views: 2636

Re: Can ROS support H323 and over SNAT and DNAT?

yes, you have to enable the H323 in "/ip firewall service-port"
Thanks
by mangust
Wed Apr 09, 2008 10:24 am
Forum: Beginner Basics
Topic: Can ROS support H323 and over SNAT and DNAT?
Replies: 5
Views: 2636

Can ROS support H323 and over SNAT and DNAT?

Hello.
Can ROS support H323 and over SNAT and DNAT?
by mangust
Wed Apr 09, 2008 10:21 am
Forum: General
Topic: DST Time do not work starting from in 3.4
Replies: 3
Views: 999

DST Time do not work starting from in 3.4

Hello All.
Looks like DST do not activate automatically starting from v3.4
The way to make it active is push Apply button (???).
Anybody can confirm?
by mangust
Mon Feb 25, 2008 10:59 pm
Forum: General
Topic: x86 and booting from hdc
Replies: 0
Views: 359

x86 and booting from hdc

Is there any way to install ROS on hdc drive?
For some reasone there is no way for me to plug disk as hda.

I've found a couple posts about same question, but not found an answer.

Anyone ?
by mangust
Thu Feb 07, 2008 9:20 am
Forum: Beginner Basics
Topic: UPS Monitor on RB150 possible or not?
Replies: 2
Views: 1012

Re: UPS Monitor on RB150 possible or not?

>Disable console (/system console)
Thx
This really help me.
by mangust
Mon Feb 04, 2008 7:43 pm
Forum: Beginner Basics
Topic: UPS Monitor on RB150 possible or not?
Replies: 2
Views: 1012

UPS Monitor on RB150 possible or not?

Is it possible to get UPS Monitor via Serial Console port on RB 150
Then I try to Install UPS on my RB150 i always get next error :

02:31:11 ups,error cannot acquire port

Any Idea?

AnyOne ?
by mangust
Mon Feb 04, 2008 12:05 pm
Forum: General
Topic: IP Scan v3.x Winbox bug
Replies: 2
Views: 2077

IP Scan v3.x Winbox bug

Due IP Scan winbox show ip address of the interface without MAC address in v.3.x.
There is no IP adress of interface in v. 2.9.x.

Bug or not ?

Anyone can confirm?
by mangust
Fri Feb 01, 2008 7:48 pm
Forum: General
Topic: running config and startup config in v4.0
Replies: 5
Views: 4074

running config and startup config in v4.0

Is it possible or not? In many cases to have runing config is a great opportunity. Are MT going to provide such availability in the feature? One more needs: Name of the backup file (via backup button) should be like identity-date.backup I'm tied to rename backup file each time then I want do downloa...
by mangust
Tue Jan 29, 2008 4:38 pm
Forum: Beginner Basics
Topic: mac-telnet from Linux Box
Replies: 10
Views: 10709

mac-telnet from Linux Box

Is it possible?
How i can do that?
by mangust
Mon Jan 28, 2008 12:01 pm
Forum: General
Topic: v3.x incorrect com port settings
Replies: 1
Views: 557

v3.x incorrect com port settings

Is It BUG?
by mangust
Wed Jan 23, 2008 9:33 am
Forum: General
Topic: 2.9.51 - When ?
Replies: 3
Views: 784

2.9.51 - When ?

User manager database backup loading isn't working in this version. It will be fixed in 2.9.51 .... Is there any idea when we can see 2.9.51? I'm using 2.9.49 for RB150 now and it seems that this is a good idea. Does throughput of RB 150 depend of ROS version? I mean is it good idea to upgrade to v....
by mangust
Wed Jan 16, 2008 2:58 pm
Forum: Beginner Basics
Topic: How to remove log messages?
Replies: 6
Views: 18792

How to remove log messages?

HI.
How to remove log messages that is stored on disk?
How to remove graf info that is stored on disk?
Is it possible to clear LOG window?

Thanks
by mangust
Mon Jan 14, 2008 3:40 pm
Forum: General
Topic: Possible Bug In RC14 Ping Watchdog
Replies: 4
Views: 1969

Re: Possible Bug In RC14 Ping Watchdog

I have found that RC13 and RC14 do not create autosupport.rif in case of watchdog ... [admin@MikroTik] > log print 00:01:55 watchdog,error,critical watchdog cannot ping address 10.10.10.1, rebooting 00:00:37 system,info,account user admin logged in via local [admin@MikroTik] > system watchdog print ...
by mangust
Fri Jan 11, 2008 9:20 am
Forum: General
Topic: DHCP-OPTIONS example.
Replies: 39
Views: 69329

Re: DHCP-OPTIONS example.

That is because option 66 is clearly defined.
Option 242, on the other hand, is not clearly defined (reserved status).
Just for Info:
What's new in 3.0rc14:
...
*) fixed bug - dhcp server failed to give out options with code > 127;
...
by mangust
Thu Jan 10, 2008 2:54 pm
Forum: General
Topic: How to log link status ?
Replies: 9
Views: 3004

Re: How to log link status ?

OK thanks, I understand your point of view. However Link UP , and Link down is part of kernel messages under linux , that’s why I thought that put a such kind of message into log should not be a big problem. From other side I’d tried to setup logging via netwatch /tool netwatch add host=x.x.x.x inte...
by mangust
Thu Jan 10, 2008 1:49 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3898

Re: RouterOS RC13 stop working

tried without Layer 7
Rafael Lore
How I can disable Layer 7?
by mangust
Thu Jan 10, 2008 9:43 am
Forum: General
Topic: How to log link status ?
Replies: 9
Views: 3004

Re: How to log link status ?

SNMP is not exactly what I want. “/system logging add topics=wireless,debug action=memory” looks good, but I need the same for Ethernet interfaces :(. HI. 1)Is it possible to log link up/down status and speed/duplex mode? Im asking because it's not a problem to get such kind of information under Lin...
by mangust
Thu Jan 10, 2008 1:43 am
Forum: RouterBOARD hardware
Topic: current-firmware Last Changelog
Replies: 1
Views: 2599

current-firmware Last Changelog

Where I can get last changelog for firmware. Link below looks a bit old
http://www.routerboard.com/files/rb-2.9/CHANGELOG
Why for some routers I have
upgrade-firmware: "2.11"
for other
upgrade-firmware: "2.12"
?
ROS for all routers is 2.9.49
by mangust
Thu Jan 10, 2008 12:43 am
Forum: General
Topic: Dont see "Upload rate" and "Download rate" in v.3RC13
Replies: 3
Views: 1439

Dont see "Upload rate" and "Download rate" in v.3RC13

Hi.
Don't see "Upload rate", "Download rate", "Upload bytes", "Download bytes" in v.3RC13 simple queues.
Is it possible to have it in next RCs?
by mangust
Thu Jan 10, 2008 12:14 am
Forum: General
Topic: How to log link status ?
Replies: 9
Views: 3004

How to log link status ?

HI.
1)
Is it possible to log link up/down status and speed/duplex mode?
Im asking because it's not a problem to get such kind of information under Linux.
2)
Is it possible to see/check error packet counter under interfaces?

Thank you.
by mangust
Mon Oct 22, 2007 2:19 pm
Forum: General
Topic: DHCP-OPTIONS example.
Replies: 39
Views: 69329

Re: DHCP-OPTIONS example.

first: / ip dhcp-server option add name="option-242" code=242 value="MCIPADD=192.168.1.254,MCPORT=1719,HTTPSRVR=192.168.1.253" then : / ip dhcp-server network add [insert your dhcp values here followed by] dhcp-option=option-242 I'm sure that this not work. I've tried to setup that a lot of times. ...
by mangust
Fri Oct 19, 2007 12:06 pm
Forum: General
Topic: DHCP-OPTIONS example.
Replies: 39
Views: 69329

Re: DHCP-OPTIONS example.

/ ip dhcp-server option add name[color=#FF0000]="TFTP"[/color] code=66 value="10.120.10.10" / ip dhcp-server network add address=10.120.21.0/24 gateway=10.120.21.1 netmask=24 \ dns-server=206.246.134.233,10.120.10.10 wins-server=10.120.10.10 \ ntp-server=206.246.134.2,206.246.134.66,206.246.134.1 d...
by mangust
Fri Oct 19, 2007 12:03 pm
Forum: General
Topic: DHCP-OPTIONS example.
Replies: 39
Views: 69329

Re: DHCP-OPTIONS example.

[quote="ForePoint] this is essentially the same as what was posted by mrz, just has a few more parameters defined... we set the TFTP option for our VoIP phones to connect back to our asterisk server at our main office.[/quote] How about next ?? option option-242 code 242 = string ; option option-242...
by mangust
Fri Oct 19, 2007 9:20 am
Forum: General
Topic: 2 WAN Failover Script :: Problem
Replies: 9
Views: 1452

Re: 2 WAN Failover Script :: Problem

That would partially resolve the issue. 10.1.1.1 should be, from what i see, the adsl router. Pinging it will always reply, even if it is not connected to the other end. It is the local address of the modem. The address on the other side of the modem cannot be known this way. Also you cannot verify...
by mangust
Thu Oct 18, 2007 9:51 am
Forum: General
Topic: 2 WAN Failover Script :: Problem
Replies: 9
Views: 1452

Re: 2 WAN Failover Script :: Problem

GW1 - 10.1.1.1 (Goes to ADSL modem so this is a private IP) GW2 - 203.114.162.1 (Public IP address) How can I successfully do failover with GW1 being my primary GW and GW2 being the failover? Someone suggested I use check-gateway PING for GW1 and Distance 2 for GW2, problem is if the ADSL modem is ...
by mangust
Thu Oct 18, 2007 9:47 am
Forum: General
Topic: Way to redistribute SNAT IP in OSPF.
Replies: 9
Views: 1612

Re: Way to redistribute SNAT IP in OSPF.

make static route with corresponding destination (in v3, there is interface routes, without GW, as I know) Поставил v3. Честно говоря не нашёл то место где можно поставить подобную роуту. :( При использовании quagga вроде всё просто - вбивается lo0 и потом “redistribute connected”. Может подскажите...
by mangust
Wed Oct 17, 2007 10:50 am
Forum: General
Topic: DHCP-OPTIONS example.
Replies: 39
Views: 69329

Re: DHCP-OPTIONS example.

Anyone ? May anybody give me exapmle how to setup in dhcp "domain-name mydomain.com" ? Next example do not work: ( add name=domain-option code=15 value=mydomain.com add name=domain-option code=15 value="mydomain.com" add name=domain-option code=15 value=6D79646F6D61696E2E636F6D add name=domain-optio...
by mangust
Mon Oct 15, 2007 12:11 pm
Forum: General
Topic: DHCP-OPTIONS example.
Replies: 39
Views: 69329

DHCP-OPTIONS example.

Hello ALL. Have anybody real life example with dhcp-option? I mean that example that I’ve check ( http://www.mikrotik.com/testdocs/ros/2.9/ip/dhcp.php ) is not work for me. I’ve get info from Mikrotic that “You have to set DHCP option settings in HEX form.” How I can do that? Which tool is better to...
by mangust
Mon Oct 15, 2007 11:39 am
Forum: General
Topic: Way to redistribute SNAT IP in OSPF.
Replies: 9
Views: 1612

Re: Way to redistribute SNAT IP in OSPF.

Hello Bholler ... and 10Mbit link and SNAT`ed 80.220.220.100 is a static route. u may have to configure the CPE to redistribute-static either as-type1 or as-type2 . Nonetheless, i wonder why you wanted the IP to be redistibuted. it will make the configuration look clumsy. The best approach to this i...
by mangust
Thu Oct 11, 2007 6:40 pm
Forum: General
Topic: Way to redistribute SNAT IP in OSPF.
Replies: 9
Views: 1612

Re: Way to redistribute SNAT IP in OSPF.

Hello Mangust, if my interpretation is wrong, then u may have to send the diagram of what u want to achieve. CPE always made snat via output interface (via ip 80.220.220.100). CPE always get default route from Main router. The problem is that Main router should receive 80.220.220.100. 80.220.220.10...
by mangust
Wed Oct 10, 2007 2:27 pm
Forum: General
Topic: Problem to use netinstall with PXE-boot option.
Replies: 1
Views: 1009

Problem to use netinstall with PXE-boot option.

HI. I've try to reinstall ROS soft on my x86 router. I have Intel adapter with PXE option. On the router screen I've see that PC gets IP address, but fail to get tftp paramiters. therefore I do not see anything in ''Router/Drivers" window. How I can fix that? Is there any goof FAQ about PXE-boot and...
by mangust
Wed Oct 10, 2007 12:19 pm
Forum: General
Topic: Way to redistribute SNAT IP in OSPF.
Replies: 9
Views: 1612

Re: Way to redistribute SNAT IP in OSPF.

Any Ideas??
by mangust
Tue Oct 09, 2007 6:01 pm
Forum: General
Topic: Way to redistribute SNAT IP in OSPF.
Replies: 9
Views: 1612

Way to redistribute SNAT IP in OSPF.

Hello All. I have two independent channel between 2 routers ( Main router and CPE MT router). CPE MT router receive default route from Main router via OSPF. Customer that is connected to the CPE router goes to the Internet by SNAT. I would like to redistribute SNAT IP to the central router. SNAT IP ...
by mangust
Fri Jul 27, 2007 1:30 pm
Forum: General
Topic: connection-state=new tcp-flags=!syn Does it works?
Replies: 0
Views: 1318

connection-state=new tcp-flags=!syn Does it works?

HI. I want to DROP NEW BUT NOT SYN packet. On My linux box there was next rule iptables -A FORWARD -p tcp ! --syn -m state --state NEW -j DROP I've try to make the same on MT box - ip firewall filter add chain=forward action=log tcp-flags=!syn connection-state=new protocol=tcp ip firewall filter add...
by mangust
Fri Jun 15, 2007 8:57 pm
Forum: General
Topic: How to make connection to MT box via VPN client?
Replies: 0
Views: 549

How to make connection to MT box via VPN client?

Does anyone can help me with real example of MT box side? I want to connect to LAN (inside network) by Cisco VPN client (or other VPN client). The only one thing that I understand now is that I need to create peer (0.0.0.0) [admin@MikroTik] > ip ipsec peer print Flags: X - disabled 0 address=0.0.0.0...