Can you help me whit an example?This can be Done either with ROS or swOS...
Please share more datails about your installation.Friends,
You would have some idea how to have the pppoe amount on top of a vlan which in turn is linked to pppoe-server as an interface. Prtg collection system.
Solved!Yes, it is a well known bug in winbox.
It appears it can sometimes be fixed by deleting the session (.viw) file but I have not observed that.
why have you S+85DLC03DI SFP+ modules ?
The correct PN is S+85DLC03D, whitout "I".
"I" version have less distance capacity and other shortcomings.
Hello, solved this?CCR1036-8G-2S+ with SFP+ modules, linked at 10G - unable to pass anything over 1.2Gbps...
Not impressed AT ALL with these devices currently.... Incredibly slow.
Are you sure?I'm working on this today....
seems to work.
This Router have public BGP peers, but NOT receive full table to reduce overload...Is Cisco 2951 able to handle full BGP routes and can handle like 3Gbps ?
Two CISCO 2951.which cisco router do you use ?
Or Mikrotik could fix the behavior of the OSPF redistribution function.
Also - it would be nice if routing filters allowed you to set the cost metric when redistributing routes into OSPF...
Is not this case...have you tried the check-gateway feature? it should enable and dissable default routes if its unavalible
I need to use Winbox.Use webfig to avoid it!
This for a PPPoE client?That may be a client-side default route issue. I.e. each tunnel sets default route up during connect, thus breaking the other tunnel.
Tnx, I wait for answer about supout.rif that I send to Mikrotik Support.CCRs are very young devices, and yours has rather "old" firmware and RouterOS version... See this post: http://forum.mikrotik.com/viewtopic.php?p=508710
FreeBSD and MPD, interesting. tnx for infoThere's a FreeBSD program called mpd that can act as an MLPPP server. In addition you could buy a Juniper router but I guess that's not any better price wise then getting yourself a Cisco router.
tnx for replayNo solved till now
we are just using workarounds
Contact DMA. First installation in free...can anyone send me how to install dmasoftlab in ubuntu 12.04LTS? please send me link please in my inbox .. thanks
Please, send me a MSN contact.dear can u post ur config i also need that...
thks in advance...
ok, only load balance UP/DOWNload...It is possible to play with port costs and achieve situation when download goes through one port and upload through another.
Yes, this is my suspectYou probably have in hotspot servers - turned on adress pool , (and also dhcp server on same interface)... swich to none
I agree, but some tests should perfomed on realtimeThanks, but I prefer to keep the discussion on this board, since it may be helpful to others!
Hi Inssomniak,Ya thanks I used that thread as help on setting up my network, I would have missed the horizon setting.
My target throughput is over 100Mbps full duplex...Yes okay how many megabits per seconds / Mbps?The max avaible...
I agree with you.I'm not 100% sure on this, but are you certain that you don't have to memory actions that trigger on the same logs? I think to file should just log to file.
The max avaible...What throughput can one expect in this band?
Yes, bonding can be a solution, but bonding is layer 2?you may establish another EoIP tunnel over the second connection, and then use bonding (either in Active, or in Adaptive mode) to bond those two tunnels
actually, color is not an indicator of limitation. for example, if max-limit=10M and actual throughput is ~8M, queue is red. but if it has limit-at=9M, limitation won't be applied until 9M throughput
A little explaination: in yellow state, RouterOS begin packets limitation or only in red state?actualy, in WinBox, green means that used bandwidth is 0-50% of max-limit, yellow = 50-75%, red = 75-100%
Make sure you are running the newest Ubiquiti firmware on your clients
Other iusse to prefer Bridge-Bridge or Bridge-StationWDS?There is no difference between bridge-bridge and bridge-station-wds for security/performance.
[admin@ZTE] > /system serial-terminal usb2 channel=0 [Ctrl-A is the prefix key]
Not.Is a Mikrotik fully compatibile with NanoStation M5 AirMax MIMO ?
are you that say that this is not possible...these issues you should ask to manufacturers.
But I see some devices that i suspect are Mikrotik based...because miniPCI can't hold it - simple as that.
Yes I know SEF and Alcoma... but why not can find miniPCI for this GHz or module that shift a 5 GHz miniPCi to 11 GHz or above?these are uvb (11,18,28GHz) devices. SAF Tehnika is Latvian company which developing uvb RF devices, such as Czech Alcoma.
Not, can you help me to understand?and do you know uvb voltages?3.3V.. why?do u know miniPCI voltages?
This class device usually have indoor unit and outdoor RF unit. I think mPCI power resource is not enough to supply RF outdoor unit.
Hi, have you solved?Yea, when I do that, I use the default username: admin and leave the password blank. Then when I go to connect, it waits a few seconds and then I get a message "Invalid Username or Password" and all I can do is click OK, and I am back to square one!
3.3V.. why?do u know miniPCI voltages?
I m searching for...did you find any?
I have RADIUS server on Freeradius.magnavox, i can write an radius server for you, which is give reject packet the black listed mac : ) with mysql database, in windows platform. if you interest please send me a message
Yes, this is very easy to implement, no problem to setup it ... but my rule are different!AP only allows the good MAC you know and drop everything else
if you are not planning to send streams i would suggest to look at igmp-proxy feature. It uses a lot less resources and is suitable for simple network topologies.
I fllowed this wiki, but not work.well, igmp-proxy is plain simple, just have to set up correct values in correct places.
here is description of it:
Yes, it is true.You can very likely find the source code for these helper apps by looking at the iptables sources. MT is a linux kernel and the firewall is based on iptables.
Hi SImon,Ok! I disabled the connection-type=ftp. Accept related and established connections and it is now working.
Thank you for your assistance.
Heres a *virtual beer*
That's strange, mine XR looks like this:hoho yes there it is
there are 4 pc's 2 AMD 2 Intel (what does it meter I use what I can find)
and Default tx Power for XR5
Does it have something to do with country and 'frequency mode' settings ?
3.x not recognize at all this card , okNope. It is the new driver in 4.0 that supports the card. 3.x does not recognize the card.
I don't know defaulkt value for XR5. Can you check it and report here?Tx-Power XR5 (should be 600mw )- Tx Power is on default
Strange... RouterOS show AMD in your resource TABmagnavox yes its Intel 2400Mhz Mb Asrock Prescott 82801 Intel chipset
Are you sure? You have an AMD cpuInside the Box 4xXR5 Intel 2400Mhz - If u want call me crazy
good night that device I can use to realise two I connect:
98km bandwidth 25Mb
48km bandwidth 40Mb
I have 4 Radiowaves Antennas 32dbi of double polarization.
Thank you very much.