Does anybody convert this for ROS7? VPN kill switch doesn't work.

Some have more success putting a dumb switch in between Windows pc and device to be netinstalled.

But then again, I only use Linux for netinstall ( a dedicated old Dell laptop from 2008), close to 100% success rate.

Tried with Windows 7,10, Linux. The detection is rate a big zero.

Have you followed the help page exactely? https://help.mikrotik.com/docs/display/ROS/Netinstall I.e., all network adapters disabled during your attempts (except for the one connected)? Netbooting Client IP is : 192.168.88.3 Network adapter IP: 192.168.88.2 Gateway IP" 192.168.88.1 All firewall...

I tried with 3 different power adapter, all are same.

Hi there, My router had a script to restart at every day 8 AM. But yesterday when I came back at 1 PM, I saw my router was shut down at first I checked the power connector. It was fine then I replug the power connector. The router booted up and immediately shut down after 5 to 7 seconds then I replu...

Is there Any way to configure NordVPN in OVPN mode. IKEv2 is method is blocked by ISP. Is there any hope?

Please add an option to save the WOL list.

This is the actual result of DoH. This build(6.47) is same as 6.47rc2. I'm fetching DoH connection error: idle timeout issue from both versions. This issue solves by rebooting router but not permanently. It starts after sometimes. A.PNG A1.PNG a2.PNG This will continue until reboot and start again t...

Hi there, I unable to connect any devices through my secondary repeater to my HAP AC² router. This issue started after update v6.47beta60 to current 6.47rc2. Everything was working perfectly in 6.46.6 to older. TPLink repeater config: Static IP + DHCP disable. So Mikrotik servers IP addresses to all...

Follow these steps exactly: ./ip dns set servers=1.1.1.1,1.0.0.1 ./system ntp client set enabled=yes server-dns-names=time.cloudflare.com ./tool fetch url=https://curl.haxx.se/ca/cacert.pem ./certificate import file-name=cacert.pem passphrase="" ./ip dns set use-doh-server=https://1.1.1.1...

Thank you guys. I found channel 13 is almost free. Channel 6 to 11 are overlapping a lot.

You are running 5765 Ceee, this is wrong, should be 5745 Ceee or 5765 eCee

Can You suggest me for 2.4 also. It also has same issue

You are running 5765 Ceee, this is wrong, should be 5745 Ceee or 5765 eCee

Thank you, Now everything works perfectly.

Can you also show the "rates" tab?

Here it is:

Like above people said, signal quality and strenght are important. Show us the router configuration and signal levels in the router registration table, not your windows programs.

I'm just 1.5 ft away from the router and getting terrible speed from it. Here is some screenshot of different connectivity. 2.4GHz Speed: 2.4GHz Network.PNG 5GHz Speed: 5GHz Network.PNG Ethernet Speed: Ethernet.PNG My old router (TPLINK WR841HP v5) is providing 95-98Mbps from same server. But recent...

Hi there,
I'm getting maximum 40-50Mbps in 5GHz network. Is that normal or maximum speed for RBD52G-5HacD2HnD (HAP AC²)?
Ethernet speed is OK, it is approximate 780-800Mbps.
Thanks in advance.

Thank you all guys,
Actually frequency list missing [Location: Bangladesh] in firmware. And only a few country works for me. China, no country select working perfectly.
Thanks.

Hi there,
I'm curious to know, What's the function of this LED. What does it mean. It is always turned off. Thanks.

Hello everyone,
Any android device can't detect my HAP AC² 5GHz network. I am able to see both 2.4 & 5 GHz networks on my laptop but any mobile device can't.
I tried multiple channels but no solution.