Can the CarlitoXXPro module be switched to NAT instead of bridge?

My Carlito SFP finally arrived after almost two months! Thanks COVID! It works fine with my EPON ISP. It also works fine with my Brocade ICX 6450 switch but I had to manually set the port to 1Gb instead of 10Gb. I have one problem though. My ISP uses VLAN 0 (probably LAN) on the fiber line for TR_0...

My Carlito SFP finally arrived after almost two months! Thanks COVID! It works fine with my EPON ISP. It also works fine with my Brocade ICX 6450 switch but I had to manually set the port to 1Gb instead of 10Gb. I have one problem though. My ISP uses VLAN 0 (probably LAN) on the fiber line for TR_0...

Hi sotirone, The VLAN interfaces share the same MAC address from the physical interface so, you don't need to assign different MAC addresses or use separated ethernet interfaces for each VLAN, apart from that you don't need to TAG/UNTAG the VLANS in your switch , if you want to isolate the SFP port...

I ordered and I am currently waiting for my CarlitoXXPro SFP ONU to arrive. Can you help me clear some things out? First of all, I am using a Brocade ICX6450 switch and a pfSense router. The ONU is going to be plugged into the Brocade switch so that it acts as a media converter. My ISP uses EPON. I ...

Hello, has anyone played around with U-Fiber Instant? I need it for EPON but from what I can see it does not support it. Has anyone tried to flash it with other firmware? What firmware could it be flashed with?

What is the difference between G-010S-P and G-010S-A? Their specs seem identical so the G-010S-A should be compatible with the firmware the G-010S-P is compatible, no? Also, what about the Nokia G-010S-B? Does anyone have any idea if it can be flashed with CarlitoXXPro's firmware? Maybe BackON can ...

Hi, I have compiled a list of popular GPON modules. Let me know if I missed something or made a mistake. =-=-=-=-=-=-=-= Chipset: Intel/Lantiq PEB98036 =-=-=-=-=-=-=-=-=-=-=-= FGS202 Flash 8MB, RAM 1MB, System RTOS eCos Pros- Quick start Cons - Flash programming/soldering required for SN/Password c...

Has anyone tried CarlitoxxPro's SFP with pfSense?

Is the OS important or not? Is there a driver that needs to be loaded?

Does it work with Mellanox 10Gb SFP+ adapters? (specifically the Mellanox ConnectX-3).

Hi, I bought the module "CarlitoxxPro GPON ONU SFP (CPGOS03-0490 v2.0)", I want to share some of my conclusions after doing many tests. - It is not 100% compatible with all Mikrotik routers, as comrade Gnubyte commented, the module is not always detected by the router, you have to remove ...

Just happened to me for the first time. WTF?

Only icmp traffic passing, everything else was dead.

Tracked it down to the switch because OpenVPN clients had no problem connecting to the router.

I am having the same problem with the CSS326-24G-2S+ on the SFP+ ports. I am connecting a workstation with an Intel X520 10Gb card and Fiberstore Cisco SFP-10G-SR SFP+ modules. My Linux dmesg is full of this: ixgbe 0000:42:00.1 enp66s0f1: NIC Link is Down ixgbe 0000:42:00.1 enp66s0f1: NIC Link is Up...