Community discussions

Search found 184 matches

by raktim
Tue Aug 16, 2016 4:06 pm
Forum: General
Topic: Need help in GRE tunnel MTU
Replies: 2
Views: 577

Re: Need help in GRE tunnel MTU

But my other end is Cisco
by raktim
Sun Aug 14, 2016 12:53 pm
Forum: General
Topic: Need help in GRE tunnel MTU
Replies: 2
Views: 577

Need help in GRE tunnel MTU

Please help me...

How can i change mine Mtu size to 1476.
It will work if i will disable / enable Gre-tunnel.
After reboot, same problem, too large Mtu, mine=1422, received=1476.
[img]
Mtu.jpg
[/img]
[img]
mtu_tunnel.jpg
[/img]
by raktim
Sun Jun 21, 2015 7:31 am
Forum: Forwarding Protocols
Topic: Ospf error "Discarding packet: Locally originated"
Replies: 1
Views: 2016

Ospf error "Discarding packet: Locally originated"

ospf_error.jpg
How can i solve this issue??
Please need help.
by raktim
Tue Jun 02, 2015 6:56 pm
Forum: General
Topic: ipsec failed between Cisco & Mikrotiik
Replies: 12
Views: 3005

Re: ipsec failed between Cisco & Mikrotiik

"cdiedrich" was right, it should be DES When i change ipsec enc-algorithm=3des to DES now log shows "failed to pre-process ph2 packet."
ipsec_ph2_error.JPG
Any one can help me please......
by raktim
Sun May 31, 2015 12:58 pm
Forum: General
Topic: ipsec failed between Cisco & Mikrotiik
Replies: 12
Views: 3005

Re: ipsec failed between Cisco & Mikrotiik

A. IMHO log shows problem with DH_GROUP: 1024 vs 768 bit
B. Could you make time be more accurate on Mikrotik. We are in 2015 not in 2002.


i have already tried with this (DH Group & PFS Group) parameter. but not working....
by raktim
Sun May 31, 2015 9:31 am
Forum: General
Topic: ipsec failed between Cisco & Mikrotiik
Replies: 12
Views: 3005

Re: ipsec failed between Cisco & Mikrotiik

Problem has not solved yet. Cisco debug log shows:: entry number 47755 : CRYPTO-4-RECVD_PKT_NOT_IPSEC Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /10.30.1.4, src_addr= 10.30.2.71, prot= 47 timestamp: 777181959 Mikrotik Ipsec error Shows:: 03:38:41 ipsec,debug rejected enctype: DB(prop#1:tr...
by raktim
Thu May 28, 2015 8:49 am
Forum: General
Topic: ipsec failed between Cisco & Mikrotiik
Replies: 12
Views: 3005

Re: ipsec failed between Cisco & Mikrotiik

:-( You might probably want to add topics=ipsec to /system logging and see what's going wrong in more detail. Also a deep look into the Cisco logs can help. From my experience the Cisco logs are easier to understand with IKE problems. Additionally, a debug crypto isakmp or debug crypto ipsec comman...
by raktim
Thu May 28, 2015 6:58 am
Forum: General
Topic: ipsec failed between Cisco & Mikrotiik
Replies: 12
Views: 3005

Re: ipsec failed between Cisco & Mikrotiik

Hmmm... Are you sure your Cisco is using 3des for IKE encryption? Try setting enc-algorithms to aes-128-cbc instead of 3des. Leave PFS-group on modp1024. Good luck, -Chris Thanks, but Bad Luck it's not working, i have tried & selected all possible parameters, Ipsec error shows on Mikrotik "failed t...
by raktim
Wed May 27, 2015 4:37 am
Forum: General
Topic: ipsec failed between Cisco & Mikrotiik
Replies: 12
Views: 3005

Re: ipsec failed between Cisco & Mikrotiik

In your proposal, try to set pfs-group to none or mopd768, if the peer is a PIX firewall.
Thanks "cdiedrich", i have changed pfs-group but it's not working. It is Cisco ASR1002.
by raktim
Tue May 26, 2015 4:41 pm
Forum: General
Topic: ipsec failed between Cisco & Mikrotiik
Replies: 12
Views: 3005

ipsec failed between Cisco & Mikrotiik

Please Need help to establish Ipsec connection between Cisco & Mikrotik. Cisco crypto isakmp policy 10 hash md5 authentication pre-share crypto isakmp key ******** address 0.0.0.0 0.0.0.0 crypto isakmp invalid-spi-recovery crypto ipsec transform-set test esp-3des esp-md5-hmac crypto map try_bd 9999 ...
by raktim
Sat May 16, 2015 7:13 pm
Forum: General
Topic: Need help to deploy configuration between CISCO and Mikrotik.
Replies: 0
Views: 304

Need help to deploy configuration between CISCO and Mikrotik.

How to convert below configurations in to Mikrotik . OSPF router ospf 1 router-id 192.168.16.179 log-adjacency-changes network 20.10.3.144 0.0.0.3 area 3000 network 20.10.3.148 0.0.0.3 area 3000 network 20.10.3.152 0.0.0.3 area 3000 network 20.40.2.80 0.0.0.3 area 3000 network 20.40.2.84 0.0.0.3 ar...
by raktim
Sat Nov 29, 2014 9:12 am
Forum: Wireless Networking
Topic: Metal 2 shpn Problem in WIFI
Replies: 151
Views: 82648

Re: Metal 2 shpn Problem in WIFI

i have upgraded to v 6.22 also firmware in my Metal 2Shpn. After up gradation, last few days i have changes all possible parameters but problem has not solved. Smartphones, Wifi Usb Dongles & Ip cameras are connected and works within 20 Meters distance. Above 20 meters these devices are connected bu...
by raktim
Fri Nov 28, 2014 7:20 am
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 54828

Re: 6.22 released!

**Metal 2Shpn is not working in 2GHz-B/G/N mode . it works only in B/G mode.
**Smart Phones , wifi usb Dongles & ip cameras are not connected with Metal 2Shpn @ short or long distance.
by raktim
Wed Nov 26, 2014 5:26 pm
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 54828

Re: 6.22 released!

I upgraded to 6.22 also firmware, but problem of Metal 2Shpn has not solved yet. I can't connect from 30 meters distance.
by raktim
Sun Nov 16, 2014 12:55 pm
Forum: Wireless Networking
Topic: How many rules are allowed in Wireless Access list ??
Replies: 0
Views: 765

How many rules are allowed in Wireless Access list ??

How many MAC addresses or rules are allowed in wireless Access list of Mikrotik 951G 2HND or level 4 license.
by raktim
Sat Nov 08, 2014 3:24 pm
Forum: Wireless Networking
Topic: Need Graphs for Wirelees Clients...
Replies: 1
Views: 745

Need Graphs for Wirelees Clients...

I manage bandwidth in Access list (AP TX, Client TX Limit) for wireless clients. Is there any options to see the graphs for wireless clients.
by raktim
Fri Nov 07, 2014 6:11 pm
Forum: Wireless Networking
Topic: Metal 2 shpn Problem in WIFI
Replies: 151
Views: 82648

Re: Metal 2 shpn Problem in WIFI

Can we replace mikrotik with ddwrt in this device for test purpose???
by raktim
Wed Oct 29, 2014 11:24 am
Forum: Wireless Networking
Topic: Metal 2 shpn Problem in WIFI
Replies: 151
Views: 82648

Re: Metal 2 shpn Problem in WIFI

I have upgraded the firmware patch to (ar7240_3_17_2_Metal_2SHPn.fwf), but problem has not solved yet. :( :( :(
by raktim
Fri Oct 03, 2014 3:55 pm
Forum: Wireless Networking
Topic: Metal 2 shpn Problem in WIFI
Replies: 151
Views: 82648

Re: Metal 2 shpn Problem in WIFI

i have upgraded to "routeros-mipsbe-6.21rc3.npk", but problem remain exist. Can anyone please give me the link of "firmware patch (ar7240_3_17_2_Metal_2SHPn.fwf)" ??????
by raktim
Thu May 22, 2014 12:10 pm
Forum: Wireless Networking
Topic: rb951G-2HnD PoE
Replies: 7
Views: 8272

Re: rb951G-2HnD PoE

Does RB951Ui-2HnD has input power in ether1 & output power in ether 5???
by raktim
Sun May 18, 2014 2:08 pm
Forum: RouterBOARD hardware
Topic: New - RB951G-2HnD
Replies: 68
Views: 99832

Re: New - RB951G-2HnD

Can i do it in RB951Ui-2HnD???
by raktim
Sat Sep 29, 2012 6:12 pm
Forum: Wireless Networking
Topic: Netgear WGR614 V7 as AP with Mikrotik??
Replies: 4
Views: 984

Re: Netgear WGR614 V7 as AP with Mikrotik??

My Problem has solved. it's working,

1. i have connected Mikrotik lan to Netgear Lan port (not wan)
2. disabled dhcp on netgear.
3. enable dhcp on mikrotik.



thanks,

raktim
by raktim
Sat Sep 29, 2012 5:48 pm
Forum: Wireless Networking
Topic: Netgear WGR614 V7 as AP with Mikrotik??
Replies: 4
Views: 984

Re: Netgear WGR614 V7 as AP with Mikrotik??

I have bought a TPLink TL-WN 350 GD, but my Mikrotik x86 machine does not recognize this wlan card. so i want to use this netgear as AP with my Mikrotik, so clients can access Ap. i am newbie in wireless network. i want to convert my cable network to wireless network for clients. please need your he...
by raktim
Sat Sep 29, 2012 10:59 am
Forum: Wireless Networking
Topic: Netgear WGR614 V7 as AP with Mikrotik??
Replies: 4
Views: 984

Netgear WGR614 V7 as AP with Mikrotik??

Can i use "Netgear WGR614V7" as Access point with Mikrotik? if possible please write details..

thank you.
by raktim
Sun Sep 23, 2012 2:39 pm
Forum: Wireless Networking
Topic: Can i use wireless interface as AP
Replies: 1
Views: 537

Can i use wireless interface as AP

Hi i want to implement wireless network in my area, i don't have any idea about wireless network. Can i use "Netgear WG311T 108" Wireless interface As Access point in x86 mikrotik.
by raktim
Thu Apr 15, 2010 6:58 am
Forum: General
Topic: Flush logs
Replies: 3
Views: 827

Flush logs

i want to flush/delete all logs from Mikrotik router without reboot.


any idea?


thnxs,
raktim
by raktim
Wed Apr 07, 2010 11:13 am
Forum: General
Topic: Need help in policy routing
Replies: 7
Views: 874

Re: Need help in policy routing

thank you very much. But need help in nat rule. Please help me in src nat rule. i have tried with below rule, but not working

chain=srcnat action=src-nat to-addresses=xxx.xxx.58.0-xxx.xxx.58.127 (ISP1, here i put xxxx.58.1/25 in lan ip from isp1)
out-interface=ether2 (ISP2)
by raktim
Wed Apr 07, 2010 7:24 am
Forum: General
Topic: Need help in policy routing
Replies: 7
Views: 874

Re: Need help in policy routing

But what abt DVB technology??



thnxs,
raktim
by raktim
Mon Apr 05, 2010 2:23 pm
Forum: General
Topic: Need help in policy routing
Replies: 7
Views: 874

Need help in policy routing

i wanted to all of my Rx packet will come from ISP1. and Tx packet will go through ISP2.
Isp1 is use for download and isp2 is for only upload.
How can i will mark Rx and TX separately??



isp1---------- |------------|
lan -----------| RB1000 |
isp2-----------|------------|





thnxs,
raktim
by raktim
Thu Apr 01, 2010 5:59 pm
Forum: General
Topic: Need command to see only enable users in pppoe
Replies: 3
Views: 572

Re: Need command to see only enable users in pppoe

sorry, this is not what i wanted.

In my pppoe secret list i have many disable users. i want to print only enable or disable users from the secret list. Which will help me to find out how many users has disabled in this month.(Billing purpose).


thnxs,
raktim
by raktim
Thu Apr 01, 2010 4:30 pm
Forum: General
Topic: Need command to see only enable users in pppoe
Replies: 3
Views: 572

Need command to see only enable users in pppoe

i have more than 3000 pppoe user's per router. To find out the User list i just use the command /ppp secret print
I want to see only enable or only disable users from pppoe secret list in terminal mode.

thnxs,
raktim
by raktim
Sat Mar 20, 2010 5:27 pm
Forum: General
Topic: Sniff file viewer
Replies: 4
Views: 1875

Sniff file viewer

i have started a packet sniffer and file saved as a sniff. But how can i read this sniff file from Files Menu ???


thnxs,
raktim
by raktim
Thu Mar 04, 2010 1:52 pm
Forum: RouterBOARD hardware
Topic: RB1100
Replies: 185
Views: 64355

Re: RB1100

We need powerful router than RB1000 also need SFP ports.

thnxs,
raktim
by raktim
Sat Feb 27, 2010 2:54 pm
Forum: General
Topic: Quota
Replies: 6
Views: 1946

Re: Quota

i have configured Hotspot. Now i want to make quota limit for my user. How can i??? do i need to extra radius server machine?? is it possible without extra radius server machine???

thnxs,
raktim
by raktim
Sat Feb 20, 2010 7:07 am
Forum: General
Topic: Quota
Replies: 6
Views: 1946

Re: Quota

All of my clients are pppoe . how can i make a quota per user. like "user1" can download 5Gb. after 5Gb used, then user cant browse or download. users: 2 sun pppoe 123456 Gold 10.0.0.16 3 nasuha pppoe faisal Silver 10.0.0.24 profile: name="Gold" local-address=10.0.0.1 use-compression=no use-vj-compr...
by raktim
Sat Nov 21, 2009 7:06 am
Forum: General
Topic: need help in BGP
Replies: 2
Views: 586

Re: need help in BGP

same problem

bgp-cease.JPG
by raktim
Thu Nov 05, 2009 1:37 pm
Forum: Scripting
Topic: need script for p2p
Replies: 7
Views: 1252

Re: need script for p2p

thnxs kirshteins & SurferTim, it's working
by raktim
Thu Nov 05, 2009 12:37 pm
Forum: Scripting
Topic: need script for p2p
Replies: 7
Views: 1252

Re: need script for p2p

i have tried with v3.28, 3.24, 3.20, 3.13 . script can run but changes not occurs in filter rules.


thnxs,
raktim
by raktim
Thu Nov 05, 2009 11:42 am
Forum: Scripting
Topic: need script for p2p
Replies: 7
Views: 1252

Re: need script for p2p

thnxs for reply, but it's not working..
by raktim
Thu Nov 05, 2009 6:30 am
Forum: Scripting
Topic: need script for p2p
Replies: 7
Views: 1252

need script for p2p

i want to open p2p for specific time but below script is not working. i dont want to disable/enable the filter rule.


/ip firewall filter set [find P2P=all-p2p] action=accept
/ip firewall filter set [find P2P=all-p2p] action=drop
by raktim
Mon Oct 26, 2009 10:25 am
Forum: General
Topic: need help in BGP
Replies: 2
Views: 586

need help in BGP

I m using V3.15 RB1000 for BGP.Total Bw uses 60Mbps. My Upstream is International Internet Gateway (IIG1), Some days ago they(Upstream) have changed Cisco to Huawei.
Now my BGP hangs 4/5 times in this week. To established BGP i have to disable/enable peer so many times.
BGP.JPG
by raktim
Fri Oct 02, 2009 1:11 pm
Forum: General
Topic: need help in NAT
Replies: 4
Views: 625

Re: need help in NAT

THNXS, CHUPAKA


i used below rule but not working, anything else or did i miss anything????


chain=srcnat action=src-nat to-addresses=202.X.X.0-202.X.X.7
src-address=192.168.96.0/28 out-interface=wan
by raktim
Thu Oct 01, 2009 10:03 am
Forum: General
Topic: need help in NAT
Replies: 4
Views: 625

need help in NAT

i have 192.168.1.0/24 private ip masquered to 1 real ip. But i want 192.168.1.0/24 will masquered to xxxxxx/29 public ip. So, client's can uses rapidshare.

Any idea??


thnxs,
raktim
by raktim
Wed Jul 22, 2009 3:30 pm
Forum: General
Topic: MAC address block for pppoe clients
Replies: 6
Views: 5988

Re: MAC address block for pppoe clients

mac-block.JPG
Not working, still logged in from this MAC.

Flags: X - disabled, I - invalid, D - dynamic
0 ;;; test
chain=input action=drop src-mac-address=00:21:27:C6:3B:8C
by raktim
Wed Jul 15, 2009 1:28 pm
Forum: General
Topic: MAC address block for pppoe clients
Replies: 6
Views: 5988

Re: MAC address block for pppoe clients

1. how can i sure that firmware is upgraded??? & what is the way to upgrade the firmware in x86 machine???

2. There is no prerouting option in filter rules. Do i need mark the connection first in Mangle???

thnxs,
raktim
by raktim
Sat Jul 11, 2009 2:35 pm
Forum: General
Topic: MAC address block for pppoe clients
Replies: 6
Views: 5988

MAC address block for pppoe clients

i want to block MAC address for pppoe clients. i m using V3.13.

// chain=forward action=drop src-mac-address=00:21:27:C6:3B:8C Not working...


Any idea???

thnxs,
raktim
by raktim
Wed Jul 01, 2009 6:47 am
Forum: General
Topic: PPPOE user DISCONNECT in 3min
Replies: 9
Views: 1828

Re: PPPOE user DISCONNECT in 3min

Have u checked the switch? It can happen if generate broadcast storm in switch which connect with Router interface (Lan). U can check it by ping from client end to router local address.



thnxs,
raktim
by raktim
Thu Jun 11, 2009 3:21 pm
Forum: General
Topic: cache on ssd drive
Replies: 2
Views: 960

cache on ssd drive

i was using webproxy for my 1000 pppoe broadband clients. here i used sata 250 Gb hdd. router os v3.13. When cache fill up 70% of HDD, that time browsing speed is so slow but download speed is fine. What abt ssd?? Can i use it on cache drive instead of Hdd??? Now a days 250 Gb sata ssd or PCI-Expres...
by raktim
Mon May 18, 2009 8:57 am
Forum: General
Topic: volume based Internet for PPPOE Client
Replies: 1
Views: 380

volume based Internet for PPPOE Client

Is it possible to make volume based internet connection for my pppoe clients. ie. specific profile based clients can't use more than 1GB BW.


thnxs,
raktim
by raktim
Fri May 08, 2009 3:09 pm
Forum: General
Topic: cache queue freezing or hang
Replies: 2
Views: 483

Re: cache queue freezing or hang

But where i have to use this packet mark???
i have more than 1000 pppoe clients, and i put their BW in pppoe profile.



thnxs,
raktim
by raktim
Fri May 01, 2009 6:48 pm
Forum: General
Topic: cache queue freezing or hang
Replies: 2
Views: 483

cache queue freezing or hang

i m using mikrotik proxy more than 6 machines. version 3.13. the queue, where packet mark for unlimited cache. everything is fine but sometimes this queue freezes, that time clients (pppoe) get unlimited bandwidth. to solve this problem , i have to change queue type, default to default-small, again ...
by raktim
Wed Apr 22, 2009 1:08 pm
Forum: General
Topic: Queue simple Bursts on CISCO router
Replies: 2
Views: 602

Re: Queue simple Bursts on CISCO router

i was used "rate limit" at cisco 2811 . May be it will help you.

thnxs,
raktim
by raktim
Fri Apr 17, 2009 6:11 pm
Forum: The User Manager
Topic: need billing solution for pppoe clients
Replies: 1
Views: 1271

need billing solution for pppoe clients

i m newbie here (User Manager). I have mikrotik router RB1000 which have 1000 pppoe clients. I need a simple billing solution. How User manager help me??? or Do i need another radius manager server??? i read topic user manager in wiki. but i cant understand.

plzzzz need help..


thnxs,
raktim
by raktim
Mon Mar 23, 2009 4:43 pm
Forum: General
Topic: Bonding: stories of success?..
Replies: 3
Views: 657

Re: Bonding: stories of success?..

i did it succefully, check below link

http://forum.mikrotik.com/viewtopic.php?f=2&t=26755
by raktim
Fri Mar 06, 2009 3:52 pm
Forum: General
Topic: [Question] How can I assign a queue rule for an application
Replies: 3
Views: 478

Re: [Question] How can I assign a queue rule for an application

make another queue, in this queue the dst. address is ur yahoo address or any which u want un limited. and put it the top of the previous queue.
Or u can mark packet in mangle by messenger port and in queue advance use mark packets and make it unlimited.


thnxs,
raktim
by raktim
Thu Mar 05, 2009 4:25 pm
Forum: General
Topic: satellite modem+mikrotik
Replies: 1
Views: 532

satellite modem+mikrotik

is it possible to add mikrotik with satellite modem (Comtech 8psk tpc 10M, cdm 570) ???
i have a cable converter serial to ethernet, can i use it in rb1000 or X86??


need advice.
thnxs,

raktim
by raktim
Thu Mar 05, 2009 5:37 am
Forum: General
Topic: R.OS 3.20 : Queues don´t work
Replies: 8
Views: 1111

Re: R.OS 3.20 : Queues don´t work

if ur simple queue type is default-small, make it default.


thnxs,
raktim
by raktim
Wed Mar 04, 2009 2:57 pm
Forum: General
Topic: need help in proxy 3.20
Replies: 0
Views: 504

need help in proxy 3.20

MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK MikroTik RouterOS 3.20 (c) 1999-20...
by raktim
Sat Feb 14, 2009 12:31 pm
Forum: General
Topic: Mikrotik Inter Vlan Routing?
Replies: 1
Views: 1186

Mikrotik Inter Vlan Routing?

Can i make Mikrotik + cisco switch as a Inter vlan routing. Like "Router On a stick"
Any one have any idea??



thnxs,
raktim
by raktim
Mon Jan 19, 2009 3:19 pm
Forum: General
Topic: transparent proxy redirect
Replies: 2
Views: 512

Re: transparent proxy redirect

At first u have to add masqurade rule. then redirect rule. or try disable in - interface.
In v3.17 it's automatically in transparent mode. And in transparent mode, dont need to configure browser's proxy.



thnxs,
raktim
by raktim
Fri Jan 09, 2009 3:55 pm
Forum: General
Topic: need to understand nat rules, action=same
Replies: 10
Views: 6381

need to understand nat rules, action=same

i read the the mikrotik manual to understand the "Action=same". May be example will clear my confusion.
please help me.
by raktim
Sun Dec 28, 2008 7:26 am
Forum: General
Topic: how to kick ppp user from CLI
Replies: 1
Views: 548

Re: how to kick ppp user from CLI

/interface pppoe-server remove [find user=abcd]



thnxs,
raktim
by raktim
Tue Dec 16, 2008 2:12 pm
Forum: General
Topic: need help to make 2 gateways
Replies: 1
Views: 466

need help to make 2 gateways

//i want 30% bandwidth will use gateway A and 70% for gateway B. I m using V3.13 //i made mangle rules: add action=mark-connection chain=prerouting comment=A connection-state=new \ disabled=no in-interface=lan new-connection-mark=A_con nth=3,1 \ passthrough=yes add action=mark-routing chain=prerouti...
by raktim
Mon Dec 01, 2008 3:11 pm
Forum: General
Topic: Dual Core problem in 3.14 and 3.15 versions
Replies: 45
Views: 4814

Re: Dual Core problem in 3.14 and 3.15 versions

Can anyone plz tell me, which version is stable for dual core. i have tried with v3.13, but freezing.


thnxs,
raktim
Magically freezing problem has solved in v3.13. i think its stable v3.13
by raktim
Sun Nov 30, 2008 7:04 am
Forum: General
Topic: Dual Core problem in 3.14 and 3.15 versions
Replies: 45
Views: 4814

Re: Dual Core problem in 3.14 and 3.15 versions

Can anyone plz tell me, which version is stable for dual core. i have tried with v3.13, but freezing.


thnxs,
raktim
by raktim
Wed Nov 26, 2008 8:22 am
Forum: General
Topic: LAG port support
Replies: 2
Views: 4917

Re: LAG port support

by raktim
Sat Nov 08, 2008 6:40 am
Forum: General
Topic: external proxy unlimited cache
Replies: 1
Views: 630

external proxy unlimited cache

how can i get unlimited cache from my external linux(squid) box??


thnxs,
raktim
by raktim
Mon Nov 03, 2008 7:27 am
Forum: General
Topic: msn messenger and hotmail
Replies: 2
Views: 986

Re: msn messenger and hotmail

change mss to 1400
by raktim
Sun Oct 26, 2008 6:08 am
Forum: General
Topic: how to make two e-BGP???
Replies: 5
Views: 959

Re: how to make two e-BGP???

How can i discard everything at end..
i have add
/routing filter add chain=btcl-out prefix=xxxxx/22 prefix-length=22-32 action=passthrough
/routing filter add chain=btcl-out prefix=0.0.0.0/0 prefix-length=0-32 action=discard

but it's disacard everything, also prefix xxxxx/22

thnxs,
raktim
by raktim
Fri Oct 24, 2008 12:36 pm
Forum: General
Topic: help me to understand the BGP filter
Replies: 7
Views: 3152

Re: help me to understand the BGP filter

Can any one explain "BGP local pref" and "BGP prepend"??

thnxs,
raktim
by raktim
Fri Oct 24, 2008 12:30 pm
Forum: General
Topic: need help in Graphs v3.13
Replies: 5
Views: 773

Re: need help in Graphs v3.13

problem has solved. i just have to add lan ip or pppoe local ip(172.16.101.1/32), in /tools graphing queue and interface rules.


thnxs,
raktim
by raktim
Wed Oct 22, 2008 2:40 pm
Forum: General
Topic: how to make two e-BGP???
Replies: 5
Views: 959

Re: how to make two e-BGP???

It's not working. May be i missed something in my routing filter rules,
bgp2.JPG
mang1.JPG
plz need urgent help,

thnxs,
raktim
by raktim
Mon Oct 20, 2008 11:47 am
Forum: General
Topic: Web Proxy make MT instability
Replies: 1
Views: 506

Re: Web Proxy make MT instability

write ur all configuration here
by raktim
Mon Oct 20, 2008 9:23 am
Forum: General
Topic: I wnat some thing to stop NetCut and the new gateway viruses
Replies: 7
Views: 1981

Re: I wnat some thing to stop NetCut and the new gateway viruses

have u set ur interface arp-reply only

thnxs,
raktim
by raktim
Sat Oct 18, 2008 5:52 pm
Forum: General
Topic: help me to understand the BGP filter
Replies: 7
Views: 3152

Re: help me to understand the BGP filter

THNXS mrz
In BGP Route Filter i have add Prefix= xxxxx/22, But what is prefix length, what should i have to write here.


thnxs,
raktim
by raktim
Sat Oct 18, 2008 8:44 am
Forum: General
Topic: what's with IP 77.247.176.154 ?
Replies: 1
Views: 630

Re: what's with IP 77.247.176.154 ?

it's a dynamic ip in address-list. May be u have put a rule for "ssh attack" or something else in firewall there u mentioned that Action= add src to address-list




thnxs,
raktim
by raktim
Fri Oct 17, 2008 3:33 pm
Forum: General
Topic: help me to understand the BGP filter
Replies: 7
Views: 3152

Re: help me to understand the BGP filter

so, i think out-filter should be advertised routes of my BGP.
And In-filter should be my Upstream's BGP routes.

Am i right???



thnxs,
raktim
by raktim
Thu Oct 16, 2008 4:50 pm
Forum: General
Topic: help me to understand the BGP filter
Replies: 7
Views: 3152

help me to understand the BGP filter

i can understand the Prefix-list-out= which i have advertised (xxxxxx/21) in my BGP. But I cant understand the Prefix-list-in. In documentation it is written that "receiving routes". it is not clear to me. In V3 i dont get any doc abt BGP filter. Can any one help me to remove my confusion about Pref...
by raktim
Wed Oct 15, 2008 11:44 am
Forum: General
Topic: need help in Graphs v3.13
Replies: 5
Views: 773

Re: need help in Graphs v3.13

yes
by raktim
Tue Oct 14, 2008 6:02 pm
Forum: General
Topic: need help in Graphs v3.13
Replies: 5
Views: 773

Re: need help in Graphs v3.13

i add xxxxx/22 in Queue & interface rules.But it's not working. It's working when i make it 0.0.0.0 . i m using more than 16 Mikrotik routers. i dont find this type of problems in others.
i have made new proxy on it & upgrade in to v3.13. I thought may be it occurs by proxy or version.


thnxs,
raktim
by raktim
Sun Oct 12, 2008 6:09 pm
Forum: General
Topic: a very bad problem
Replies: 2
Views: 637

Re: a very bad problem

go PPPOE server then set keep alive time to lower value


thnxs,
raktim
by raktim
Sun Oct 12, 2008 5:47 pm
Forum: General
Topic: need help in Graphs v3.13
Replies: 5
Views: 773

need help in Graphs v3.13

i cant see the graphs but if i make 0.0.0.0 to interface and queue rules then i can. i m using public ip to acces the graphs. my ip is belong to /24 subnet (red mark of the pic) . here i m using Mikrotik proxy. //chain=srcnat action=masquerade src-address=172.16.104.0/22 out-interface=wan //chain=ds...
by raktim
Sun Oct 12, 2008 5:26 pm
Forum: General
Topic: How to make traffic from cache to download faster
Replies: 7
Views: 1786

Re: How to make traffic from cache to download faster

r u using mikrotik proxy or external proxy???
i think below link will help u to solve the problem

http://forum.mikrotik.com/viewtopic.php?f=2&t=25549
by raktim
Sat Oct 11, 2008 4:56 pm
Forum: General
Topic: I need help with an urgent rule!
Replies: 3
Views: 675

Re: I need help with an urgent rule!

make a queue with dst-address is ur squid server address and put the queue at the top

thnxs,

raktim
by raktim
Thu Oct 09, 2008 5:05 am
Forum: General
Topic: PPPOE DIE even on 3.13
Replies: 50
Views: 9606

Re: PPPOE DIE even on 3.13

i did n't face this type of problem before, But when i upgrade v2.9.51 to v3.13 i m really confusing abt "Peer is not responding"


is it cable problem or router????
by raktim
Tue Oct 07, 2008 6:17 pm
Forum: General
Topic: need help to view proxy log
Replies: 8
Views: 1250

Re: need help to view proxy log

thnxs,
Done
by raktim
Tue Oct 07, 2008 3:42 pm
Forum: General
Topic: need help to view proxy log
Replies: 8
Views: 1250

Re: need help to view proxy log

proxy-debug.JPG
why web-proxy debug??
by raktim
Tue Oct 07, 2008 9:47 am
Forum: General
Topic: need help to view proxy log
Replies: 8
Views: 1250

Re: need help to view proxy log

ok i will try to solve my problem from old archieve, if i need help, then i will write again.

thnxs,
raktim
by raktim
Tue Oct 07, 2008 6:16 am
Forum: General
Topic: warning msg
Replies: 2
Views: 685

warning msg

can anyone tell me what type of warning message it is??
and what i have to do for it???
warning.JPG
thnxs,
raktim
by raktim
Tue Oct 07, 2008 6:00 am
Forum: General
Topic: need help to view proxy log
Replies: 8
Views: 1250

Re: need help to view proxy log

Thnxs Chupaka,
But i need documentation or any articles, how can i do this??

plz need ur help


thnxs,
raktim
by raktim
Mon Oct 06, 2008 4:34 pm
Forum: General
Topic: need help to view proxy log
Replies: 8
Views: 1250

need help to view proxy log

how can i view the web proxy log file??? i mean access.log(which ip browses which website) file. I am using v3.13.


thnxs,
raktim
by raktim
Mon Oct 06, 2008 9:45 am
Forum: General
Topic: queue of v3.10
Replies: 2
Views: 574

Re: queue of v3.10

thnxs Chupaka, It's my core BGP router. not possible to reboot or update for single moment. if i will get chance, i 'll do it later.

Again thnxs for ur advice.

thnxs,
raktim
by raktim
Sun Oct 05, 2008 5:59 pm
Forum: General
Topic: queue of v3.10
Replies: 2
Views: 574

queue of v3.10

i cant see any tx rx rate. i have to check it by interface.would u plz see the below pic
queue.JPG
thnxs,
raktim
by raktim
Sun Oct 05, 2008 6:51 am
Forum: General
Topic: Is Cached content to be downloaded faster the usual
Replies: 3
Views: 692

Re: Is Cached content to be downloaded faster the usual

see the below link, i think it will help u.

http://forum.mikrotik.com/viewtopic.php?f=2&t=25549


thnxs,
raktim
by raktim
Sun Oct 05, 2008 6:49 am
Forum: General
Topic: Cached files without queue lmit v3.11
Replies: 16
Views: 2536

Re: Cached files without queue lmit v3.11

Thnxs Chupaka... it's working.

thank u very much. :D

thnxs,
raktim
by raktim
Sat Oct 04, 2008 5:44 pm
Forum: General
Topic: Cached files without queue lmit v3.11
Replies: 16
Views: 2536

Re: Cached files without queue lmit v3.11

just simple queue..

can u plz tell me da difference between default-small & default




thnxs,
raktim
by raktim
Sat Oct 04, 2008 3:37 pm
Forum: General
Topic: Cached files without queue lmit v3.11
Replies: 16
Views: 2536

Re: Cached files without queue lmit v3.11

i have tried but failed...
mangle.JPG
is it right way???
by raktim
Sat Oct 04, 2008 3:23 pm
Forum: General
Topic: Cached files without queue lmit v3.11
Replies: 16
Views: 2536

Re: Cached files without queue lmit v3.11

i have 400 pppoe users. But i need help to make mangle rule which will mark the cached packet. then i will make a simple queue & put it at the first with unlimited bandwidth. May be it will help pppoe users to get access cached without queue limit. can anyone plz help me abt the mangle rule??? thnxs...
by raktim
Fri Oct 03, 2008 4:10 pm
Forum: General
Topic: PPPoE Dialer Package?
Replies: 5
Views: 1528

Re: PPPoE Dialer Package?

it's very simple. U have to install raspppoe protocol in ethernet. then u can run raspppoe from run menu, just write "raspppoe" and enter. now u can press query available service to get service and press create dialer for that service.

it's so easy,

thnxs,
raktim
by raktim
Fri Sep 26, 2008 8:15 am
Forum: General
Topic: bonding interface with cisco 2950 T
Replies: 4
Views: 7256

Re: bonding interface with cisco 2950 T

Now it has solved(Cisco 2950T), when i changed ""channel-group mode On(Enables Ether-channel Unconditionally)"" instead of Auto. It's not working, when mode is in Port Aggregation Protocol.


thnxs,

raktim
by raktim
Thu Sep 25, 2008 6:27 am
Forum: General
Topic: bonding interface with cisco 2950 T
Replies: 4
Views: 7256

Re: bonding interface with cisco 2950 T

Thnxs mrz, What i have to do to make both link same speed? In my Cisco2950T etherchannel ports are Gi0/1 and Gi0/2. And other ports are 10/100 where branch mikrotiks are connected.
Below is my core mikrotik interface pic where mode is round-robin.
bond1.JPG
by raktim
Wed Sep 24, 2008 11:25 am
Forum: General
Topic: bonding interface with cisco 2950 T
Replies: 4
Views: 7256

Re: bonding interface with cisco 2950 T

i want to add some info here that my core mikrotik is RB 1000 v3.3 i think this scanario will make us higher throughtput, loadbalance, failover . but i am facing some problem, i am testing in different mode like balance -rr, balance-tlb. In balance-rr i got packet loss 10% may be created loop In bro...
by raktim
Wed Sep 24, 2008 10:40 am
Forum: General
Topic: bonding interface with cisco 2950 T
Replies: 4
Views: 7256

bonding interface with cisco 2950 T

i bond My Core Mikrotik with Cisco 2950T, //Core Mikrotik: name="mbd-bond" mtu=1500 mac-address=00:0C:42:20:9B:8F arp=enabled slaves=ether4,LAN DIST mode=broadcast primary=none link-monitoring=none arp-interval=100ms mii-interval=100ms down-delay=0s up-delay=0s lacp-rate=30secs //Cisco2950T : Group:...
by raktim
Sun Sep 21, 2008 4:59 pm
Forum: General
Topic: client start pppoe server without permission
Replies: 8
Views: 1217

Re: client start pppoe server without permission

is it possible with Cisco catalyst 2950 ???

How can i make 1 uplink only,??? would u plz write the technique or command

thnxs,
raktim
by raktim
Thu Sep 18, 2008 6:19 am
Forum: General
Topic: client start pppoe server without permission
Replies: 8
Views: 1217

Re: client start pppoe server without permission

does n't matter 200 clients or 5000 clients, If u have more clients then u should have more switches. First u have to start from Core switches then others.
switch.JPG

thnxs,
raktim
by raktim
Wed Sep 17, 2008 1:26 pm
Forum: General
Topic: client start pppoe server without permission
Replies: 8
Views: 1217

Re: client start pppoe server without permission

u have to connect your pc to your lan switch (client's switch). Now check query , if unwanted service is available,then disconnect the one cable and check query,again disconnect other cable and check query. Now u can find out which cable is responsible for unwanted service. and this way u can get th...
by raktim
Wed Sep 17, 2008 7:12 am
Forum: General
Topic: client start pppoe server without permission
Replies: 8
Views: 1217

Re: client start pppoe server without permission

By using "Raspppoe" at client's end, problem can be solved. if u press query, then it will shows the all services in this lan, then u have to select the service name (pppoe server name) and create a dial up. If u want u can catch that client's who made another ppppoe server or other server on this s...
by raktim
Sun Sep 14, 2008 2:30 pm
Forum: General
Topic: Bonding interface for pppoe
Replies: 4
Views: 1286

Re: Bonding interface for pppoe

Sergejs, I have made bridge in one of my router as a test basis. Here My pppoe server interface is "bridge1", and lan1 & lan2 is bridge ports. bridge.JPG //if i keep two uplink (like bonding) from lan1 & lan2 to client's switch, pppoe server is not working, //if i keep one uplink(lan1) it's working,...
by raktim
Sun Sep 14, 2008 2:00 pm
Forum: General
Topic: Bonding interface for pppoe
Replies: 4
Views: 1286

Re: Bonding interface for pppoe

Thnxs, Sergejs. i need better performance coz i have 700 pppoe clients and in pick hour bandwidth uses more than 35Mb. I thought it will balance the bandwidth between two interfaces & will deliver higher throughput. Can u plz try to help me, how will i make bridge between 2 interfaces??? Thnxs, raktim
by raktim
Thu Sep 11, 2008 5:42 pm
Forum: General
Topic: Bonding interface for pppoe
Replies: 4
Views: 1286

Bonding interface for pppoe

i have made a pppoe server by bonding interface, where ether2 and ether 3 is slaves and mode is round robin algorithm.

My problem is when i use Raspppoe to get service, Now i get 4 services. Before bonding i always got 2 services.
bonding.JPG
by raktim
Thu Sep 11, 2008 4:49 pm
Forum: General
Topic: RB1000: whats your current cpu load / traffic / pps
Replies: 4
Views: 1171

Re: RB1000: whats your current cpu load / traffic / pps

Average Cpu load is not greater than 30% and i think if i will upgrade to V3.13 than Cpu load will decrease.


thnxs,
raktim
by raktim
Thu Sep 11, 2008 10:09 am
Forum: General
Topic: PPPoE can't assing IP, it alway uses IP that are used
Replies: 7
Views: 1923

Re: PPPoE can't assing IP, it alway uses IP that are used

Can u plz tell us, which version r u using????

And details info. about public ip subnet which is used in ip pool.



thnxs..
by raktim
Tue Sep 09, 2008 4:59 pm
Forum: General
Topic: RB1000: whats your current cpu load / traffic / pps
Replies: 4
Views: 1171

Re: RB1000: whats your current cpu load / traffic / pps

i have been running RB 1000 last 4 months. It's a great. I used for core router, E-BGP & I-BGP is running smoothly and my bandwith is 70 Mb.
bgp.JPG

Thnxs,
Raktim
by raktim
Tue Sep 09, 2008 4:31 pm
Forum: General
Topic: read only Access
Replies: 6
Views: 920

Re: read only Access

There is a option in read only user "Hide Password" . But i dont want to give permission to see password for "Read only access" user's in secrets mode.
pppoe.JPG
by raktim
Tue Sep 09, 2008 4:22 pm
Forum: General
Topic: read only Access
Replies: 6
Views: 920

read only Access

I need a solution to Mikrotik Team. I have 400 pppoe users. i dont want that, read only access users can't see the password in secrets mode. is it possible for read mode access????



thnxs,

Raktim
by raktim
Fri Aug 22, 2008 6:36 am
Forum: General
Topic: ppp--->> active connectin, does not show Tx Rx rate in V3
Replies: 10
Views: 2425

Re: ppp--->> active connectin, does not show Tx Rx rate in V3

i have upgraded one of my router to v3.13. But still no change. i think Mikrotik Team should think about this "PPPOE Active connection"
by raktim
Wed Aug 20, 2008 8:44 am
Forum: General
Topic: kernel panic
Replies: 1
Views: 601

Re: kernel panic

i get back my router life. By view below topic ....

http://forum.mikrotik.com/viewtopic.php ... ic#p122492



thnxs,

raktim
by raktim
Wed Aug 20, 2008 7:05 am
Forum: General
Topic: kernel panic
Replies: 1
Views: 601

kernel panic

i have 400 pppoe clients in this router(x86 platform). Today morning, i just upgrade my router from v2.9.51 to v3.13. But It says "Kernal Panic" Everything has gone :(
by raktim
Mon Aug 11, 2008 7:01 am
Forum: General
Topic: how to make two e-BGP???
Replies: 5
Views: 959

how to make two e-BGP???

My BGP router is Mikrotik, i had a e-BGP with "IIG1", Now i need to make another e-BGP with "IIG2". i had

advertised "xxxxxx/22" in "IIG1" and now "yyyyy/24" in to new "IIG2".


Do i need to add another instance & AS number for "IIG2" ?
e-bgp.JPG
e_bgp.JPG
by raktim
Fri Aug 08, 2008 12:46 pm
Forum: General
Topic: read only user can shutdown the system
Replies: 13
Views: 2004

Re: read only user can shutdown the system

Thnxs Normis,

Can u help me again?
if i upgrade in to v3.11 Do i have to face problem in this below topic??
http://forum.mikrotik.com/viewtopic.php?f=2&t=22294
by raktim
Fri Aug 08, 2008 12:29 pm
Forum: General
Topic: read only user can shutdown the system
Replies: 13
Views: 2004

Re: read only user can shutdown the system

but did you see the other posts? you can't shutdown, even if it offers you to.


i have checked 3 of my mikrotik v2.9.51. if i press shutdown as a read only user, it's really works. :( ,I have checked in my other v3.10, here it offers but not working.

thnxs,
raktim
by raktim
Fri Aug 08, 2008 12:23 pm
Forum: General
Topic: read only user can shutdown the system
Replies: 13
Views: 2004

Re: read only user can shutdown the system

i think i should have to send my supout.rif to support





thnxs,
raktim
by raktim
Fri Aug 08, 2008 12:21 pm
Forum: General
Topic: read only user can shutdown the system
Replies: 13
Views: 2004

Re: read only user can shutdown the system

Looking at your Pictures again you do have it disabled.
I tested on Version 3.11 the option is there and the box comes up but it does not allow it reboot or shutdown.


Timatics, i want to say u that, i have also tested in v3.10,3.3 & 3.4 before post this topic. But problem occurs only in v2.9.51 .
by raktim
Fri Aug 08, 2008 12:14 pm
Forum: General
Topic: read only user can shutdown the system
Replies: 13
Views: 2004

Re: read only user can shutdown the system

the default allowed actions for the user group "read" allow reboot. change your read group Policies or create a new User group. I agree the Default should not allow reboot. But it can be fixed easy enough. Did u see my first pic? In my read group , there were only 3 policies ... read, winbox & loca...
by raktim
Thu Aug 07, 2008 5:36 pm
Forum: General
Topic: read only user can shutdown the system
Replies: 13
Views: 2004

read only user can shutdown the system

My read only access user's of winbox can shutdown the system. Any idea to disable this option for read only user???
pic1.JPG
pic2.JPG
by raktim
Thu Jul 31, 2008 6:24 pm
Forum: General
Topic: login info
Replies: 2
Views: 583

login info

when i log in to winbox, sometimes it's show 2 times. i dont understand why this happening? plz check the red mark area from below pic.
log_info.JPG
by raktim
Wed Jul 23, 2008 6:47 am
Forum: General
Topic: How to route some IP address to other internet gateway
Replies: 3
Views: 987

Re: How to route some IP address to other internet gateway

u have to do policy routing, //mangle, /chain=pre-routing src-address "ur lan address block" Action=mark routing, New routing mark "test" pass through=yes //routing, /ip route rules then add src-address "ur lan address block" routing mark= "test" action=lookup table="test" /ip route add dst-address=...
by raktim
Sat Jul 19, 2008 7:24 am
Forum: General
Topic: PPPoE + File Sharing/LAN Games
Replies: 3
Views: 1243

Re: PPPoE + File Sharing/LAN Games

make a queue, dst-address is ur client's address block. and place this at the top.




thnxs,
raktim
by raktim
Fri Jul 11, 2008 3:02 pm
Forum: General
Topic: FTP server behind MT Firewall
Replies: 1
Views: 618

Re: FTP server behind MT Firewall

What's ur FTP IP address. Is it Public or Private?

Can u plz set a real ip in FTP server, then try from outside.

& check (FTP Server) /etc/hosts.allow
/etc/hosts.deny
by raktim
Fri Jul 11, 2008 2:43 pm
Forum: General
Topic: very slow moving rules at winbox MT3.x
Replies: 2
Views: 602

Re: very slow moving rules at winbox MT3.x

i m also facing this....
by raktim
Sun Jul 06, 2008 2:49 pm
Forum: General
Topic: Bad voice over mikrotik
Replies: 15
Views: 2178

Re: Bad voice over mikrotik

Just boost up ur bandwidth,
i think it 'll solve ur problem.





thnxs,
by raktim
Mon Jun 30, 2008 9:25 am
Forum: General
Topic: RB 1000 as a core router
Replies: 15
Views: 2228

Re: RB 1000 as a core router

i have already send my supout.rif to support@mikrotik.com May be they will help me to find out the problem.. 10 days ago i've bought 3 RB1000. under this core router i have also installed two of them. WE have also running 12 more routers in x86 machines. But i think RB1000 is not better for huge ban...
by raktim
Sat Jun 28, 2008 7:45 am
Forum: General
Topic: hotmail new account problems
Replies: 6
Views: 1270

Re: hotmail new account problems

check interface MRU & MTU
by raktim
Sat Jun 28, 2008 5:45 am
Forum: General
Topic: RB 1000 as a core router
Replies: 15
Views: 2228

Re: RB 1000 as a core router

some times it goes through 100%.
core_router1.JPG
by raktim
Fri Jun 27, 2008 12:56 pm
Forum: General
Topic: RB 1000 as a core router
Replies: 15
Views: 2228

RB 1000 as a core router

i m using RB 1000 in my isp as a core router . Here i m using BGP routing and bandwidth is 44 MB. Within 4 days it hangs 5 times. last two days it's works fine.
core_router.JPG
by raktim
Mon Jun 16, 2008 5:36 am
Forum: General
Topic: block outgoing VPN
Replies: 6
Views: 1227

Re: block outgoing VPN

i did it, But i m curious about layer7 filter. i upgraded my router to v3.10 just for layer7.

Any idea, how to block this in layer7 filter.


thnxs,
by raktim
Sun Jun 15, 2008 1:49 pm
Forum: General
Topic: block outgoing VPN
Replies: 6
Views: 1227

Re: block outgoing VPN

Below is my torch result..........................
rp_torch.JPG

how can i block this by using layer 7 ??????


thnxs,
raktim
by raktim
Fri Jun 13, 2008 2:25 pm
Forum: General
Topic: block outgoing VPN
Replies: 6
Views: 1227

block outgoing VPN

i have a client, who took 2 Mb from my isp. He has made a VPN by using 80 port. How can i block his outgoing VPN??? ANY Idea???
by raktim
Sat Jun 07, 2008 3:39 pm
Forum: General
Topic: how to apply diff limit for local&overseas for pppoe clients
Replies: 11
Views: 1188

Re: how to apply diff limit for local&overseas for pppoe clients

:( Any one here to solve my problem.....
"Normis" can u plzzz help me ????
by raktim
Sun Jun 01, 2008 4:10 pm
Forum: General
Topic: how to apply diff limit for local&overseas for pppoe clients
Replies: 11
Views: 1188

Re: how to apply diff limit for local&overseas for pppoe clients

plzzz help me "sergejs"....

if u need any info's or details of my router, then i will send u.
by raktim
Thu May 29, 2008 4:55 pm
Forum: General
Topic: how to apply diff limit for local&overseas for pppoe clients
Replies: 11
Views: 1188

Re: how to apply diff limit for local&overseas for pppoe clients

plz check the "test" queue, (red mark) there is no download bytes has sent.
bandwidth.JPG

mangle.JPG
by raktim
Thu May 29, 2008 3:34 pm
Forum: General
Topic: how to apply diff limit for local&overseas for pppoe clients
Replies: 11
Views: 1188

Re: how to apply diff limit for local&overseas for pppoe clients

thnxs "omega-00" i dont need that script. plz check my first pic. there i have put a queue named "test" at the top.




it's not working.... any other idea......... :(
by raktim
Thu May 29, 2008 12:00 pm
Forum: General
Topic: how to apply diff limit for local&overseas for pppoe clients
Replies: 11
Views: 1188

Re: how to apply diff limit for local&overseas for pppoe clients

Below pic is assigned ip for clients...
as_ip.JPG
by raktim
Mon May 26, 2008 12:00 pm
Forum: General
Topic: how to apply diff limit for local&overseas for pppoe clients
Replies: 11
Views: 1188

Re: how to apply diff limit for local&overseas for pppoe clients

i have unset coneection-state in mangle rule.

But it's not working Sir...............

Any other idea .....

thnxs,
raktim
by raktim
Mon May 26, 2008 6:47 am
Forum: General
Topic: how to apply diff limit for local&overseas for pppoe clients
Replies: 11
Views: 1188

how to apply diff limit for local&overseas for pppoe clients

i have 1000 of pppoe customers. below is my routers info details..... //my wan=xxxxxxa //(default gateway) ip route, destination 00000 gateway = xxxxxxxb (proxy machine) //(Nat) chain=dstnat, src-address=10.0.0.0/22, protocol=tcp, dst-port=80, Action=dst-nat to-address=xxxxxxxb to-ports 3128 //mangl...
by raktim
Thu May 22, 2008 9:25 am
Forum: General
Topic: ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡
Replies: 4
Views: 851

Re: ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡

make unknown interface to known........




thnxs,
by raktim
Sat May 17, 2008 1:41 pm
Forum: General
Topic: Dedicated Speed to Someone
Replies: 6
Views: 1169

Re: Dedicated Speed to Someone

make 2 parent queue
1 for dedicated bandwidth 512kbps.
2 another for 1536kbps, and make childs from here as many as u need.




i think it will solved ur problem


thnxs,

raktim
by raktim
Mon May 12, 2008 9:58 am
Forum: General
Topic: access router
Replies: 4
Views: 797

Re: access router

how u want to access??? By winbox or ssh??? if u want to access by winbox then //ip firewall filter rules add input= (ur remote side ip address) action=accept if u want to access by ssh/telnet/ftp then // ip service available from = (ur remote adress) try it... i think it will work now thnxs, raktim
by raktim
Wed May 07, 2008 2:17 pm
Forum: General
Topic: other default gateway for some clients
Replies: 2
Views: 711

Re: other default gateway for some clients

Make Mangle rule, //ip firewall mangle prerouting src-address=(ur client's ip ) action= mark routing new-routing mark= (any_name) passthrough=yes Then add routing policy rules, //ip routes rules add src-address=(ur clients ip) routing-mark=(any name) table=(any_name) action=lookup Add route, //ip ro...
by raktim
Thu May 01, 2008 4:50 pm
Forum: General
Topic: Can't restore other PC backup
Replies: 5
Views: 840

Re: Can't restore other PC backup

U can use //ftp ur address
use binary //hash bin
then use //mput filename


i am sure it will work now
by raktim
Thu May 01, 2008 7:24 am
Forum: General
Topic: VPN between Mikrotik & Cisco
Replies: 5
Views: 5566

Re: VPN between Mikrotik & Cisco

:( i failed to setup VPN.. Can u plz help me in this below scanario. Mikrotik: / interface ipip add name="Tunnel1" mtu=1480 local-address=xxxxx remote-address= yyyyy / ip address add address=xxxxxxx/24 interterface=WAN add address=192.168.1.1/28 interface=LAN add address=10.0.0.1/30 interface=Tunnel...
by raktim
Sun Apr 27, 2008 6:28 pm
Forum: General
Topic: VPN between Mikrotik & Cisco
Replies: 5
Views: 5566

Re: VPN between Mikrotik & Cisco

Thnxs for link.
do i need to configure any NAT rules????

MY
wan ip xxxxxx
remote ip: yyyyyy
tunel ip: 10.0.0.1/30
lan ip:192.168.11.1/28

i m trying to go outside from lan, But i failed.
by raktim
Thu Apr 24, 2008 9:17 am
Forum: General
Topic: VPN between Mikrotik & Cisco
Replies: 5
Views: 5566

VPN between Mikrotik & Cisco

i need to make a VPN between mikrotik & cisco router(other end). which one will be easy & better for me, ipip,pptp, l2tp or pppoe????
by raktim
Sat Apr 19, 2008 3:31 pm
Forum: General
Topic: Bandwidth Shaping - Internet Access and Local LOOP Traffic
Replies: 12
Views: 2658

Re: Bandwidth Shaping - Internet Access and Local LOOP Traffic

thnxs for ur help...

so, it should be,

first queue for loop,
target-address=192.168.0.3 Max-limit=5M/5M Dst-address=192.168.0/16 Limit-at=5M/5M

Second Queue for Internet,
target-address=192.168.0.3 Max-limit=128k/128k Dst-address= 0.0.0.0/0 Limit-at=128k/128k


Is it right now???
by raktim
Sat Apr 19, 2008 2:02 pm
Forum: General
Topic: Mikrotik OS doesn't support CPU Xeon X3210 ?
Replies: 5
Views: 1203

Re: Mikrotik OS doesn't support CPU Xeon X3210 ?

Have u tried with another OS in this machine??? try with linux.....

thnxs,
by raktim
Thu Apr 17, 2008 12:37 pm
Forum: General
Topic: Bandwidth Shaping - Internet Access and Local LOOP Traffic
Replies: 12
Views: 2658

Re: Bandwidth Shaping - Internet Access and Local LOOP Traffic

simple queue-->general-->target address = 192.168.0.5 max-limit = 128k/128k
advance---> dst-address--> 192.168.0.0/16 limit-at= 5M/5M




is this rule will work for above scanario?????

thnxs
by raktim
Mon Apr 14, 2008 4:17 pm
Forum: General
Topic: Better Mikrotik in HDD or DOM ??
Replies: 5
Views: 974

Re: Better Mikrotik in HDD or DOM ??

i think DOM will be better. We have been using since 2005. For HDD it's chance for crash. We have lots of experience about that. At last i think CF is da best.



thnxs
by raktim
Sat Apr 12, 2008 6:07 pm
Forum: General
Topic: How to redirect HTTP (tcp 80) ports to another server
Replies: 24
Views: 18594

Re: How to redirect HTTP (tcp 80) ports to another server

ip firewall dst nat protocol=tcp In-interface=lan dst-port=80 Action dst-nat to address= xxxx (ur fedora/linux) to ports=xxx (ports u have to use, for proxy may be 3128)
by raktim
Sat Apr 12, 2008 5:35 pm
Forum: General
Topic: Bandwidth Shaping - Internet Access and Local LOOP Traffic
Replies: 12
Views: 2658

Re: Bandwidth Shaping - Internet Access and Local LOOP Traffic

queue.JPG
thnxs for the topic & solution. Can u plz help me in this scanario. i want to give internet access speed 128k/128k. loop speed 5mb.

How can i??

plz give me a solution???
by raktim
Thu Apr 10, 2008 3:11 pm
Forum: General
Topic: gateway change after reboot
Replies: 7
Views: 901

Re: gateway change after reboot

route.JPG
Here the system history. When the route changes automatically the history shows nothing "BY" (red mark). then the script(which i have made to change gateway to xxxx.9) change the route of gateway "BY uzair" (green mark).

Question is how it changes(red mark) ??????
by raktim
Wed Apr 09, 2008 3:22 pm
Forum: General
Topic: gateway change after reboot
Replies: 7
Views: 901

Re: gateway change after reboot

i am sure there is no script. But My previous proxy was xxxxxx6. i have changed this ip address from xxxx6 to xxxxx9 .
by raktim
Mon Apr 07, 2008 6:28 am
Forum: General
Topic: gateway change after reboot
Replies: 7
Views: 901

Re: gateway change after reboot

But it has happend when power failed and machine reboot. To overcome this problem i have wriitten a script "/ip route set [find dst-address=0.0.0.0/0] gateway=xxxxx.9" and time interval is 2 mins.


Now i dont have to change it manually & dont need to monitor it frequently.
by raktim
Tue Apr 01, 2008 6:44 pm
Forum: General
Topic: PPPoE Bursting
Replies: 6
Views: 3136

Re: PPPoE Bursting

There is the same bursting available for PPPoE clients, like you had in queues, http://www.mikrotik.com/testdocs/ros/2.9/root/queue.php?permalink=0.3615235635894125 If you will use Rate-Limit, here is syntax for the configuration, 64k/64k 256k/256k 128k/128k 10/10 rx/tx-rate=64000, rx/tx-burst-rate...
by raktim
Tue Apr 01, 2008 4:53 pm
Forum: General
Topic: gateway change after reboot
Replies: 7
Views: 901

Re: gateway change after reboot

My Gateway xxxxxxx.9 is proxy machine. some times gateway of routing is change automatically to xxxxxx.6.


Any idea to solve this problem????
gateway.JPG
by raktim
Mon Mar 31, 2008 10:15 am
Forum: General
Topic: gateway change after reboot
Replies: 7
Views: 901

gateway change after reboot

Gateway of routing is changing automatically when machine reboot.


Any idea????
by raktim
Fri Mar 21, 2008 12:41 pm
Forum: General
Topic: changing profiles in pppoe according to schedule
Replies: 8
Views: 1268

Re: changing profiles in pppoe according to schedule

For too many client's it's not possible to write a script to remove client from active connection. ppp active remove [find ppp active find]?.. i know that script. Questions was changing profiles for pppoe clients . i just said, i have 200 clients it's not possible to write 200 scripts to remove cli...
by raktim
Wed Mar 19, 2008 8:46 am
Forum: General
Topic: changing profiles in pppoe according to schedule
Replies: 8
Views: 1268

Re: changing profiles in pppoe according to schedule

to change profile ---system script, add /ppp profile set "tester" rate-limit=128k/128k i think there will be a problem. Coz... if 200 pppoe customer logged in as a profile name "silver" speed 64k/64k. when profile will be changed to "Gold" speed 128k/128k as a scheduled time. client's will not get n...
by raktim
Sun Mar 16, 2008 5:41 am
Forum: General
Topic: there is must be a solution (arp spoofers)
Replies: 14
Views: 2830

Re: there is must be a solution (arp spoofers)

when i realised someone is using my ip:XXXXXXX . then i static the ip from ARP list & made the lan to reply only. But i really shocked :( he is still using this ip. he has changed his mac address to same as mine. maybe by using MAC scanner & changer software. Any one have any idea to save from this ...
by raktim
Sat Mar 15, 2008 3:49 pm
Forum: General
Topic: MikroTik MUM 2008 Krakow
Replies: 26
Views: 5826

Re: MikroTik MUM 2008 Krakow

Me too. We are waiting for MUM@Dhaka, Bangladesh.
I think Our Dream will be come true.
by raktim
Thu Mar 13, 2008 3:37 pm
Forum: General
Topic: Simple Queue & Interface
Replies: 2
Views: 838

Re: Simple Queue & Interface

i put it at the first position. Change has occured. but rate of queue is greater than interface,
Any idea plz???
queue1.1.JPG
by raktim
Wed Mar 12, 2008 4:12 pm
Forum: General
Topic: Mikrotik Router Blocking MSN Messanger
Replies: 6
Views: 1186

Re: Mikrotik Router Blocking MSN Messanger

change the MRU MTU rate of interface, now check msn messenger.
i think it will work. keep the rate from 1480 to 1500
by raktim
Wed Mar 12, 2008 3:44 pm
Forum: General
Topic: Turning off SSH and FTP on RouterOS?
Replies: 6
Views: 9158

Re: Turning off SSH and FTP on RouterOS?

add chain=input protocol=tcp dst-port=22 src-address-list=ssh_blacklist action=drop \ comment="drop ssh brute forcers" disabled=no add chain=input protocol=tcp dst-port=22 connection-state=new \ src-address-list=ssh_stage3 action=add-src-to-address-list address-list=ssh_blacklist \ address-list-time...
by raktim
Mon Mar 10, 2008 11:10 am
Forum: General
Topic: Simple Queue & Interface
Replies: 2
Views: 838

Simple Queue & Interface

We ar using mikrotik v 2.9.42 only for bandwidth manage. But the sum of queues, total bandwidth using rate is 6.3/4.3 Mbps. But in interface it shows 8.0/5.3 Mbps. Question is where it has gone (interface-sum of queues) 8.0-5.3 =1.7 Mbps ???? there is no extra services & routing (BGP, Rip,static) is...
by raktim
Wed Mar 05, 2008 5:28 pm
Forum: General
Topic: ppp--->> active connectin, does not show Tx Rx rate in V3
Replies: 10
Views: 2425

ppp--->> active connectin, does not show Tx Rx rate in V3

i have upgrade my router from 2.9.42 to 3.4. I have 350 pppoe clients. But in 3.4v, we dont find Tx & Rx rate in pppoe-->> Active connection list. So it's a problem for me to find out which user against which ip uses how much bandwidth. But it has given in ppp-->interface list. But there is no MAC a...
by raktim
Wed Jan 30, 2008 3:17 pm
Forum: General
Topic: proxy is not working
Replies: 3
Views: 631

proxy is not working

[admin@MikroTik] ip proxy> print enabled: yes src-address: 0.0.0.0 port: 3128 hostname: "proxy" transparent-proxy: no parent-proxy: 0.0.0.0:0 cache-administrator: "webmaster" max-object-size: 4096KiB cache-drive: system max-cache-size: none max-ram-cache-size: none status: running [admin@MikroTik] i...
by raktim
Mon Jan 28, 2008 4:20 pm
Forum: General
Topic: Use winbox to log to my server from outside
Replies: 4
Views: 761

Re: Use winbox to log to my server from outside

ip firewall Filter Rules then add chain=input src address=ur outside address(which address u want to login from outside) action=Accept


try this, it think it will be working now
by raktim
Sat Jan 26, 2008 5:56 am
Forum: General
Topic: MUM for Australia - any planning?
Replies: 38
Views: 5333

Re: MUM for Australia - any planning?

it's very difficult to get visa out side of Asia. i think it will helpful for us, if u will make it near INDIA or Bangladesh.
by raktim
Wed Jan 23, 2008 6:09 am
Forum: General
Topic: view active users(pppoe) only specific profile
Replies: 0
Views: 407

view active users(pppoe) only specific profile

i have 250 above pppoe users under 7 different profile. i want to give winbox read access to profile wise. i mean one can view his active users under specific profile. any one help me plz?????
by raktim
Tue Jan 15, 2008 5:33 am
Forum: Scripting
Topic: winbox access to view pppoe active user's under prifile wise
Replies: 0
Views: 722

winbox access to view pppoe active user's under prifile wise

i have 250 pppoe users under 10 different profiles. i want to give winbox read access for specific profile base. i mean, one can view his active users under specific profile by using winbox. Any one have any idea plz????
by raktim
Sat Nov 10, 2007 6:27 am
Forum: General
Topic: How To encrypt voice traffic passing through MT ??
Replies: 12
Views: 1468

Re: How To encrypt voice traffic passing through MT ??

If u want to block voice, then block some ports in 17udp protocol also u have to block some ports in tcp protocol in ur MT filter rules... i think it's working now... if not, contact with me.. Zubair vhai... Thnxs
by raktim
Fri Nov 02, 2007 3:56 pm
Forum: General
Topic: PROXY SERVER + MIKROTIK ROUTER (can mikrotik do this..?)
Replies: 15
Views: 2037

Re: PROXY SERVER + MIKROTIK ROUTER (can mikrotik do this..?)

In ip routes u have to add destination & gateway should be ur proxy server address...
i think it's working good...
by raktim
Fri Aug 10, 2007 4:33 pm
Forum: Beginner Basics
Topic: MSN MESSENGER NOT CONNECTING
Replies: 9
Views: 2093

Re: MSN MESSENGER NOT CONNECTING

i think u have to check the firewall settings may be u have dropped some ports...
by raktim
Fri Aug 10, 2007 4:27 pm
Forum: General
Topic: winbox log in
Replies: 4
Views: 613

Re: winbox log in

there is no firewall added in first mikrotik(122.102.32.154/30) & also /ip services name=www port=80 available from=0000/0

//problem is i cant remote access (winbox) from 202.148.56.0/24

but i can find telnet & ping from it....
by raktim
Fri Aug 10, 2007 3:59 pm
Forum: General
Topic: winbox log in
Replies: 4
Views: 613

winbox log in

Hi,
my wan address is 122.102.32.154/30. & my lan address is 202.148.60.249/30.i can looged in from my lan address.
BUT, i can't logged in 122.102.32.154 from my other's mikrotik address 202.148.56.1/24 while my computer address is 202.148.56.58. :(