Has there been any progress with this? We are running RouterOS 5.7 and have had this problem since 3.30. Its not just NATing, we have the same issue with routing. We have SIP clients trying to connect to the SIP server over a VPN. However, if the SIP clients try to connect before the VPN is brought ...

Hey,

Yea, I thought about doing it that way. Not the most pretty way of doing it but it works.

It would be nice if there was a way to create a probe and for it to check the value based on the previous check.

Oh well, I'll do it that way for now.

Thanks

Mikrotik CPE bridge ethernet to Mikrotik AP There are a few different ways of doing it. How I would recommend to do this: AP Setup Bridge -> Bridge Create a bridge interface * If you want your wireless traffic to go to your ethernet traffic on that tower add ether port to bridge (under Bridge -> Po...

Hey, Couple of questions: Do you have Hotspot running on the AP? Are you able to post a copy of your config (open terminal -> type: export -> paste config) Is the CPE routing or Bridging to your computer/laptop? I have found when connection 2 Mikrotiks wirelessly, if either side is bridging to make ...

Hey, I'll show what I'm doing right now. I have a function that monitors my OSPF Neighbor's Function Name: NC Code: ros_command("/routing ospf neighbor print count") Probe http://macserver001.nextgen.ca/fimage/ss001.jpg I know the probe isn't really doing anything right now. I'm just not 1...

Hey, I'm trying to create a probe that monitors a function and considers it "down" if the value changes from the last probe. So if I'm monitoring Function "X" and it is replying with the number 2 then the next time the probe checks Function "X" and the number is 3 or 1 ...

Okay, so after see this system was opening hundreds of sessions and filling up the Memory on these devices, I found it was doing A-Symetric routing on a apart of the network. However, why does the Mikrotik's not timeout the sessions? Is there a way to limit the number of sessions per user? Anyways, ...

Hey .. I'm running The Dude 3.4 monitoring close to about 150 devices. I've hit little bugs here & there, but as a whole a great product. Recently I've hit a strange issue. Whenever you right click a device -> tools -> Winbox - Winbox loads but all the information is 'cached' and it doesn't upda...

is there a way to have Secure Hotspot without it having to except the SSL certificate? Mine is signed by a CA and it says unknown Issuer?

Any Ideas??

I agree .. I am not going to depend on some freemail service to deliver vital notifications. This is a must have feature.

When you create the PPP Connection the profile is suppose to change the MTU automatically. However I find sometimes it does this, and sometimes it doesn't. I've deployed over 200 of these routers to date, so I have seen this happen. I find the best way to make sure the MTU size is being changed corr...

Those are default Web Proxy's .. The issue is an MTU issue.

Click 'New Terminal' and paste this line:

ip firewall mangle add chain=forward action=change-mss new-mss=1454 tcp-flags=syn protocol=tcp

That should work.
Tristan