Community discussions

MikroTik App

Search found 8 matches

by abi
Thu Nov 14, 2019 7:55 pm
Forum: Beginner Basics
Topic: hEX S: is it wise choose for VLANs ?
Replies: 22
Views: 2072

Re: hEX S: is it wise choose for VLANs ?

So, you approve the idea to use CRS112 switch with hEX S like on this scheme https://wiki.mikrotik.com/images/9/9a/Image12005.gif ?
Who provide DHCP service and inter - VLAN communication filtering here ? "router" ?
by abi
Wed Nov 13, 2019 10:10 pm
Forum: Beginner Basics
Topic: hEX S: is it wise choose for VLANs ?
Replies: 22
Views: 2072

Re: hEX S: is it wise choose for VLANs ?

Thanks for sharing your experience! I definitely have the answers on both of my question. 200mbps is enough now and later I can buy bigger Mikrotik. However, I'm interested what options are 'not supported'? As I have 1 SFP and 1 copper wire, I have no need in bridge at all, just /interface vlan inte...
by abi
Wed Nov 13, 2019 9:15 pm
Forum: Beginner Basics
Topic: hEX S: is it wise choose for VLANs ?
Replies: 22
Views: 2072

Re: hEX S: is it wise choose for VLANs ?

So, VLANs work, but only on CPU ? Is this a significant impact ? I thought, hEX S has enough CPU power. I have fiber from ISP and would like to avoid another active device. I saw a scheme, according to it, SPF slot will use entire 1Gbps lane, right ? This is not a disaster, as I have another one exc...
by abi
Wed Nov 13, 2019 8:44 pm
Forum: Beginner Basics
Topic: hEX S: is it wise choose for VLANs ?
Replies: 22
Views: 2072

hEX S: is it wise choose for VLANs ?

I plan to buy router for a firewall and ipsec tasks. Layout: 1 SFP from ISP, one trunk from LAN. 1 VLAN should go through ipsec, another to default route. I read hEX hardware specs and looks like it has absolutely no hardware acceleration for VLANs, but on the other hand, it has CPU galore (2 cores,...
by abi
Mon Nov 11, 2019 8:28 pm
Forum: General
Topic: Packet loss between two bridges
Replies: 2
Views: 598

Re: Packet loss between two bridges

Thank you for your reply. I've almost lost any hope that my topic was noticed. I did everything that you suggested and I think, the problem is in printer device itself (10.0.0.10). It reliably dropping some packets when pinged outside of it's network. Yes, I know it's very confusing, but it happens ...
by abi
Thu Nov 07, 2019 9:56 pm
Forum: General
Topic: Packet loss between two bridges
Replies: 2
Views: 598

Packet loss between two bridges

I've bought Microtik recently, so I'm a new user, however I think my issue is not so beginner. I have a strange packet loss, it is not random, usually every 6th packet is lost. Sometimes it come back with delay (900ms, 1600ms), but usually it's lost completely. After reboot pings work for some time ...
by abi
Mon Nov 04, 2019 7:11 pm
Forum: Beginner Basics
Topic: Traffic between 2 bridges
Replies: 2
Views: 486

Re: Traffic between 2 bridges

Looks like I found the problem. I used 0.0.0.0/0 in ipsec policy, so replies was sucked to tunnel. I added

Code: Select all

add action=none dst-address=192.168.3.0/24 src-address=10.0.0.0/24
and traffic begin to flow between bridges.
by abi
Mon Nov 04, 2019 4:27 pm
Forum: Beginner Basics
Topic: Traffic between 2 bridges
Replies: 2
Views: 486

Traffic between 2 bridges

Hello, I've bought Microtik heX S recently to replace my old Cisco ASA 5505 at home. I have the following network layout: 1. 10.0.0.0/24 accessing 10.0.0.0/16 through ipsec VPN. 2. 192.168.3/24 accessing internet directly and 10.0.0.10/32 (network printer) So, I look at Cisco config and try to imple...