Home CAPsMAN set-up I've got the following in the house, all running long-term 6.46.8 Front Room - hAP AC2 Dining room - WAP AC Upstairs - hAP ac lite Then at the bottom of the garden I have another hAP ac lite These are all wired together using a couple of RB2011 switches. The hap AC2 is my router,...

Thank you. Will take all that onboard and give it a try.

Yes, you can use switch of other brands. If you need VLAN then you need a "smart switch" that can manage them.
In my network only the switches aren't Mikrotik (i already had them from the previous network) and Capsman works well.

Great, thanks for confirming.

Thank you.

I need to extend my wifi with either a WAP AC or a CAP AC (haven't which one decided yet). I have a backbone of HAP AC2 and HAP Lite, but where I can run this particular ethernet cable from for the WAP/CAP is a dumb tp-link gigabit switch (cabled back to a Mikrotik) I would use the included POE inje...

I have a Hap AC2 downstairs (main router connected to 80 down / 20 up ADSL internet in the UK). I then have a Hap AC Lite upstairs (connected to the AC2 via ethernet) Ethernet wired devices can make full use of the 80/20 connection. I've got the Hap devices configured in Capsman with a single SSID, ...

I have a hAP AC Lite powered by PSU.

If I buy and attach a Hex RB750Gr3 to expand port count, can I power the Hex through the POE port from the hAP AC Lite?

Thanks.

Relative MikroTik newbie, so please bear with me. I have 1 x HAP AC2 and 2 HAP AC Lite. The main issue I have is with the range of the HAP AC2 that is in the front room. If i'm sat just 6 or 7 metres away in the dining room with barely anything in the way I get drop outs / disconnected (I think beca...

Thanks for the comments, checked the provided doc, couldn't see anything that I hadn't already done. I'm not using separate VLANs, I just want the new SSID in the existing single VLAN set up. If you don't want to use vlan what is the point to have multiple SSID? I have a wireless printer that has q...

Thanks for the comments, checked the provided doc, couldn't see anything that I hadn't already done.

I'm not using separate VLANs, I just want the new SSID in the existing single VLAN set up.

On the device running as Caps-Man... Slave SSIDs don't get added to the bridge by default. Open bridge and add the ports. I have seen this on several units now. Thanks for the reply. But checking my bridge (bridge1) on the capsman unit, it already has all ethernet ports (excluding the one internet ...

Mikrotik newbie struggling here..... I have Hap AC2 and 2 x HAP AC Lite in Capsman. The main 2ghz works fine and so does the main 5ghz channel and config, both on the same SSID (MikroTik-AP) But I can't seem to get a 2nd SSID working (MikroTik-Print) on the 2ghz side setup as a slave config. Would a...

Its because of the security configuration used. Maybe the device does not support newer encryption algorithms... What is the encryption you use ? Thank you for replying, think I might have sorted it. I had both aes ccm and tkip set for both encryption and group encryption. No matter what combinatio...

To add, all three devices are at the latest stable; 6.45.7

I have a Samsung M2026W printer that used to work fine on my old router before update to Mikrotik I have one HP AC2 as my main router and then two HAP AC lite hanging off in a Capsman config. I cannot get the wireless printer to register on the network. 16:25:04 caps,info 84:25:19:31:34:6F@wlan-down...

After much frustration and continued tinkering with firewall rules, wifi settings, PiHole and all sorts of other things i'd found via Google I could not get my Chromecast gen 1 to work in my Mikrotik setup despite me knowing it all worked find with my old router setup. So I took a gamble and picked ...

Hi all, First time poster!! :D I've had my little setup a few weeks now and i'm hopefully slowly getting there; 1 x hap ac2 as my main router 2 x hap ac lite I've configured all three under capsman control. The problem i've got with my first gen Chromecast. I just cannot get the setup Google Home ap...