Community discussions

MikroTik App

Search found 44 matches

by superrouter
Fri Dec 03, 2010 12:21 pm
Forum: General
Topic: The most efficient way to transport g729/sip traffic
Replies: 1
Views: 627

The most efficient way to transport g729/sip traffic

Hi Im on a mission to finetune my network for the transport of of voice traffic. Typically after all overheads a SIP call using g729 is using about 34kbps . There is point to point hardware available which can cut all overheads and the same call will use 8kbps. I was wondering if there is a way to s...
by superrouter
Wed May 26, 2010 8:52 am
Forum: General
Topic: Changeip DDNS UPDATE error
Replies: 2
Views: 1007

Re: Changeip DDNS UPDATE error

I know, I have never had that message either. I do usually set the time right away and configure NTP client. What I did this time was just upgrade a rb112 ( my little home test router :) ) to the routeros v5 beta. then installed that script of yours just by copying it from the wiki and i pasted it i...
by superrouter
Sun May 23, 2010 12:27 pm
Forum: Forwarding Protocols
Topic: vpls tunnel over adsl link
Replies: 3
Views: 3356

Re: vpls tunnel over adsl link

so a vpls tunnel over adsl is not possible then ?

Ill take your advice headstrong. Ive been researching for more than a week before I made this decision. :) hope its a good one :)
by superrouter
Sun May 23, 2010 11:08 am
Forum: Beginner Basics
Topic: remote Dynamic IP tunnel using EoIP
Replies: 5
Views: 9505

Re: remote Dynamic IP tunnel using EoIP

here is a script to update a eoip tunnel if your destination is using a ddns service. :global "eoipint1" "youreoipinterfacename" :global "eoipconnectclient1" "yourDDNSdomain" :global "eoip1hostip" [:resolve $"eoipconnectclient1"] :global &q...
by superrouter
Sun May 23, 2010 9:23 am
Forum: General
Topic: Changeip DDNS UPDATE error
Replies: 2
Views: 1007

Changeip DDNS UPDATE error

Hi When using the newest script for changeip ddns update {tested on 4.2 version} i get an error on my x86 routeros running on v4.6 or 4.9 router. it sends an update according to the scheduler and updates the ip but gives a funny message. script info DDNS: Sending UPDATE! ddns error SSLread error the...
by superrouter
Fri May 21, 2010 2:33 pm
Forum: Forwarding Protocols
Topic: vpls tunnel over adsl link
Replies: 3
Views: 3356

vpls tunnel over adsl link

Hi

Is it possible to setup a VPLS tunnel over an adsl link. I can setup eoip links but have been struggling for days without success to do the same with VPLS.

thanks
shaun
by superrouter
Sat May 15, 2010 2:46 pm
Forum: Beginner Basics
Topic: remote Dynamic IP tunnel using EoIP
Replies: 5
Views: 9505

Re: remote Dynamic IP tunnel using EoIP

hi rocky, did you ever get that eoip from dynamic client right ?
by superrouter
Fri May 14, 2010 8:26 pm
Forum: General
Topic: Best way to transport SIP voice traffic
Replies: 8
Views: 1628

Re: Best way to transport SIP voice traffic

would there be a benefit to create an eoip tunnel and configure the ip packer over the tunnel ?
by superrouter
Fri May 14, 2010 5:42 pm
Forum: General
Topic: Best way to transport SIP voice traffic
Replies: 8
Views: 1628

Re: Best way to transport SIP voice traffic

basically all im looking for is advice on what the most reliable and efficient solution is to transport sip voice traffic between 2 mikrotik routers over ADSL pppoe.

:)
by superrouter
Fri May 14, 2010 5:35 pm
Forum: General
Topic: Best way to transport SIP voice traffic
Replies: 8
Views: 1628

Re: Best way to transport SIP voice traffic

would ovpn be better to transport sip voice traffic than pptp or l2tp.
by superrouter
Fri May 14, 2010 5:09 pm
Forum: General
Topic: Best way to transport SIP voice traffic
Replies: 8
Views: 1628

Re: Best way to transport SIP voice traffic

thanks for the reply. I do understand what they are explaining on that web page but what i was looking for was a preffered technique to transport sip voice traffic. ie would it be better to transport the vioce traffic through a eoip tunnel or pptp or l2tp. or would it be beneficial to implement the ...
by superrouter
Fri May 14, 2010 11:29 am
Forum: General
Topic: Best way to transport SIP voice traffic
Replies: 8
Views: 1628

Best way to transport SIP voice traffic

Hi Can anyone give me suggestions on the best way to transport SIP voice traffic over an adsl pppoe dial up from 1 mikrotik router to another. it basically in this topology: (client phones)<--> {Mikrotik router} <--> [adsl modem] --- ****internet*** --- {mikrotik router} <--> (voice server) Thanks S...
by superrouter
Wed Apr 07, 2010 1:30 am
Forum: Forwarding Protocols
Topic: MPLS LDP Question
Replies: 0
Views: 685

MPLS LDP Question

Hi Im am trying to setup MPLS LDP on my OSPF routed network. When I setup MPLS LDP i have no access most of my routers web interfaces / winbox. But can still ping everything on the network. this is the basic setup for mpls LDP i used just so you get the idea. /mpls ldp set enabled=yes lsr-id=10.255....
by superrouter
Mon Nov 02, 2009 2:21 pm
Forum: General
Topic: High processor usage routing voice traffic
Replies: 2
Views: 651

Re: High processor usage routing voice traffic

thanks, ill try that. But isnt there another answer. Ive pushed way more than 1mbit of data through a miktorik router without such high processor usage
by superrouter
Mon Nov 02, 2009 8:34 am
Forum: General
Topic: High processor usage routing voice traffic
Replies: 2
Views: 651

High processor usage routing voice traffic

Hi I have a link going through 4 rb's 3 rb433ah and 1 rb600a which is used just for voice traffic. Currently I have about 1mbit-1.2mbit of data in total going through the link at any time. My problem is that the processor usage on all the routerboards seems quite high and I worries that when I start...
by superrouter
Mon Nov 02, 2009 8:22 am
Forum: Wireless Networking
Topic: extra channel upgrade problem
Replies: 4
Views: 1060

Re: extra channel upgrade problem

Thanks guys, adding to scan list was the answer i needed :) Have a great week :)
by superrouter
Fri Oct 23, 2009 1:53 pm
Forum: Wireless Networking
Topic: extra channel upgrade problem
Replies: 4
Views: 1060

extra channel upgrade problem

Hi

Ive installed the extra channel upgrade, but now when trying to link the sites using any of the additional frequencies the radios wont connect. As soon as i use any of the default channels they link up perfectly .

What could be the problem.

Regards
Shaun
by superrouter
Sun Feb 08, 2009 8:35 pm
Forum: Scripting
Topic: dnsomatic dns-update script
Replies: 5
Views: 1833

dnsomatic dns-update script

Hi

Has anyone got a script working that updates the dynamic ip for dnsomatic or opendns ?

Thanks
Shaun
by superrouter
Fri Nov 28, 2008 10:23 am
Forum: Scripting
Topic: opendns with dynamic ip
Replies: 30
Views: 14044

Re: opendns with dynamic ip

Hi, Please let me know when you've done the opendns integration changeip , I use the changeip service and its awesome, gonna be even better with opendns support ! yay!
by superrouter
Mon Sep 01, 2008 4:54 pm
Forum: General
Topic: xen package installed on x86 and stuck in boot loop
Replies: 5
Views: 2153

Re: xen package installed on x86 and stuck in boot loop

will i lose my licence then ??
by superrouter
Thu Aug 28, 2008 4:08 pm
Forum: General
Topic: xen package installed on x86 and stuck in boot loop
Replies: 5
Views: 2153

Re: xen package installed on x86 and stuck in boot loop

thanks for the reply. Ive done that and am greeted by a screen that says


Welcome to mikrotik bla bla bla

mac addre ...
mac addre...

Waiting for drivers...



and i cant install anything after that from netinstall. What should i do.
by superrouter
Thu Aug 28, 2008 8:55 am
Forum: General
Topic: xen package installed on x86 and stuck in boot loop
Replies: 5
Views: 2153

xen package installed on x86 and stuck in boot loop

Hi I installed the xen package onto my VIA EPIA board running routeros and now the machine is in a continuous loop it reboots after displaying something like loading elf image or something like that, it flashes on really quickly before rebooting. I would love to know if there is a way for me to reco...
by superrouter
Mon Nov 12, 2007 11:31 am
Forum: Scripting
Topic: send update of dynamically assigned ip address to web https
Replies: 1
Views: 1040

send update of dynamically assigned ip address to web https

hello

I need to send an update of a dynamically assigned ip address from a pppoe connection to a web https link.

i.e. https://updates.opendns.com/nic/update?196.22.33.44

I am useless at scripting and would really appreciate if someone could help me with this.

Regards
by superrouter
Fri Sep 21, 2007 11:06 am
Forum: Scripting
Topic: update gateway for interface dynamically
Replies: 5
Views: 1355

Re: update gateway for interface dynamically

yes dhcp is assigned from provider.
by superrouter
Thu Sep 20, 2007 1:33 pm
Forum: Scripting
Topic: update gateway for interface dynamically
Replies: 5
Views: 1355

update gateway for interface dynamically

Hi

I need to update a gateway for a particular interface from a adsl destination ip (which changes on each connect) when the adsl connects/reconnects. I really have no idea where to start but know scripting is the only way .

Any help would be greatly appreciated.

Thanks
by superrouter
Tue Aug 07, 2007 1:01 pm
Forum: Scripting
Topic: pptp-out1 ddns update script doesnt work in 3.0
Replies: 1
Views: 1200

pptp-out1 ddns update script doesnt work in 3.0

Hi can any1 help me with the changes necessary ion this script to get it to work in the new routeros 3 ? Thanks so much! ; ;) :global pptp-interface "pptp-out1" :global pptp-connect-host "dynamic-dns-address.com" :global pptp-host-ip [:resolve $pptp-connect-host] :global pptp-con...
by superrouter
Sun Jun 17, 2007 6:45 pm
Forum: General
Topic: only allow connection to internet through pptp
Replies: 1
Views: 805

only allow connection to internet through pptp

Hi This might be a stupid question but im woundering if any1 could give me a hand / lesson with regards to a few firewall rules. I would like users which have not connected through pptp to the router when trying to connect to a website be redirected to another page and any other data dropped . If th...
by superrouter
Tue Apr 03, 2007 3:22 pm
Forum: General
Topic: point pptp client to dynamic ip
Replies: 2
Views: 926

Thanks Chris

Ill have a look over doing it through scripting, if i get stuck i'll be sure to ask you for help! :)
by superrouter
Tue Apr 03, 2007 2:32 pm
Forum: General
Topic: point pptp client to dynamic ip
Replies: 2
Views: 926

point pptp client to dynamic ip

Hello I need to point the pptp client to a dynamic dns address. if You fill out the field with the ddns address it fetches the current ip and fills it into the address field. But obviously when that ip changes im dead. What do i do to point pptp client to a dynamic ip ? Any help would be greatly app...
by superrouter
Sun Oct 08, 2006 3:21 pm
Forum: General
Topic: how to block users on hotspot from seeing eachother?
Replies: 8
Views: 4857

no kidding ! ;)

So even if i have multiple rb ap's linking together via wds turning off default forwarding will work?
by superrouter
Sat Oct 07, 2006 11:06 am
Forum: General
Topic: how to block users on hotspot from seeing eachother?
Replies: 8
Views: 4857

how to block users on hotspot from seeing eachother?

Hi, I have multiple rb 112 highsites connected through wds and authenticating using the hotspot sysem on a rb 500 board. My problem is that i do not know how to block users from accessing eachothers pc's on the network. Does anyone have any ideas which could help me out?
by superrouter
Mon Apr 24, 2006 8:55 am
Forum: Scripting
Topic: 2 hotspots - login error
Replies: 1
Views: 961

2 hotspots - login error

hi Im running 2 hotspots off 1 mikrotik board, my problem is that in some areas the hotspots are overlapping eachother and when some users dont log off wlan1 and then reconnect to wlan2 when they try to logon it tells them they are already logged on. How do i sort this problem out. Any advice would ...
by superrouter
Tue Sep 27, 2005 9:04 am
Forum: General
Topic: explanation idle timeout keepalive timeout
Replies: 6
Views: 36032

thank you

thanks very much
by superrouter
Thu Sep 22, 2005 9:32 am
Forum: General
Topic: 2 AP's on 1 hotspot
Replies: 3
Views: 1233

thanks for the reply.

I would prefer the 2nd wifi card to be part of the 1st hotspot. Is it possible?
by superrouter
Wed Sep 21, 2005 8:21 am
Forum: General
Topic: explanation idle timeout keepalive timeout
Replies: 6
Views: 36032

explanation idle timeout keepalive timeout

hello

in the hotspot profile configuration theres a session timeout, idle timeout and keepalive timeout, whats the difference between keepalive and idle timeout?

Thanks
by superrouter
Tue Sep 20, 2005 11:35 pm
Forum: General
Topic: 2 AP's on 1 hotspot
Replies: 3
Views: 1233

2 AP's on 1 hotspot

Hi I have been using the Mikrotik router for 5 months now with great success. I use the hotspot feature and its really easy to manage and configure. Now that my networks grown i would like to add another wifi card to the existing hotspot configuration to expand the hotspot. How do i do this? Even gi...
by superrouter
Tue Sep 06, 2005 12:58 pm
Forum: General
Topic: Setting up a wireless camera on hotspot
Replies: 1
Views: 811

what ive tried

In ip>>universal i added the cameras mad and gave it an ip address with bot the ipdaddress and to address being the same and interface being wlan1. Also under the dhcp server i added a lease for the camera. and in the cameras settings i set it to get its ip from the dhcp server. no luck. I think it ...
by superrouter
Tue Sep 06, 2005 8:14 am
Forum: General
Topic: Setting up a wireless camera on hotspot
Replies: 1
Views: 811

Setting up a wireless camera on hotspot

Hi Everyone

How do i setup a wireless camera on my hotspot, i gotta admit i'm in the dark here ;)

Regards
Shaun
by superrouter
Tue May 03, 2005 12:39 pm
Forum: General
Topic: Recommended Radius server for mikrotik router for hotel
Replies: 0
Views: 864

Recommended Radius server for mikrotik router for hotel

Hi I need a wifi solution for a nine story building and have used mikrotik routers in for more open solutions before. My first question is : 1: What is a recommended radius server to use for hotel access keeping in mind the radius server must have the ability to print branded internet access tickets...
by superrouter
Thu Mar 17, 2005 12:38 am
Forum: General
Topic: allowing sending and receiving mail throught walled garden.
Replies: 3
Views: 987

a difference i

Thanks for the help!
does it make a difference if the dst-host id a ip
"dst-host=192.168.10.101"
by superrouter
Thu Mar 17, 2005 12:26 am
Forum: General
Topic: allowing sending and receiving mail throught walled garden.
Replies: 3
Views: 987

allowing sending and receiving mail throught walled garden.

Hi
I want my users to be able to check their mail withi=out logging in through the hotspot manager. Do i use the walled garden? An if not what do i do?? :)
by superrouter
Wed Mar 09, 2005 2:37 pm
Forum: General
Topic: not getting assigned an ip when i enable wep security.
Replies: 3
Views: 1207

not getting assigned an ip when i enable wep security.

My problem is that i cant connect to the hotspot and access the internet when i enable wep security on the router. The network cards connect to my ap's "senao" but i dont get an ip from the router anymore. If i disable wep throught the devices it works again. Hmm im tired... :) please some...
by superrouter
Wed Mar 09, 2005 2:36 pm
Forum: General
Topic: How do I configurerouter for multiple APs
Replies: 2
Views: 1119

sorted that out

Hi, i sorted out that issue. My problem now is that i cant connect to the hotspot and access the internet when i enable wep security on the router. The network cards connect to my ap's "senao" but i dont get an ip from the router anymore. If i disable wep throught the devices it works agai...
by superrouter
Thu Feb 24, 2005 12:05 am
Forum: General
Topic: How do I configurerouter for multiple APs
Replies: 2
Views: 1119

How do I configurerouter for multiple APs

I'm very new at this. I'm trying to connect several APs to one router. I've set up Hotspot and it is working perfectly fine. The only problem is that can only connect one AP to the router. My interface "wlan1" is set to mode station, and I can only connect to it if I connect to an AP from ...