:local senha;
:local ds [/system clock get date]
:local mm [:pick $date 5 7];
:set senha ( "user*" . $mm * [:pick $ds 8 10])
/ip hotspot user set "user" password=$senha
add forward-to=192.168.10.16 regexp=".*\\.internal\\.mydomain\\.org\$" type=FWD
The most hated reply in all technical forumsall works thanks guys
Yes. The same experience from other Mikrotik user viewtopic.php?p=988766&#p988766Wait, so this behaviour could be an anti virus scanning the network?
/ip firewall filter
add action=accept chain=forward connection-state=\
established,related,untracked
He, heFinally someone has found a Grandstream product that works!!!
/ip firewall filter remove [find dynamic=no]
Agreei don't want to offend anyone, but i don't really understand the "Dark-Mode" hype !
You are right about this, only partially. In such case changelog should start with "warning, if you upgrade from versions older than..."I dont see the problem.
First 6.41.4 is very old, so some one has missed out many many version.
/ip firewall nat add action=masquerade chain=srcnat dst-address=192.168.0.67 src-address=192.168.0.0/24 out-interface=LAN comment="http from LAN"
Check speed from cable AP end, to be sure there is no fancy config in router.However the connection speed test is around 16Mbps (If connected directly to home router 2.4 GHz it's ~83 Mbps).
How can I investigate this ?
remove [find dynamic=no]
/log print where message~"AppleWatch"
/interface print detail
/interface print where default-name=sfp2
Actually without 'verbose' it takes exactly 20min. Very interesting.In previous betas it was actually completing but after very long time, like 20m.
Read, understand and implement. What more do you expect from us if we know nothing about your current config.Not sure what to do with the wiki article. How do I make it work for me, though?
This is DNS where? In IP -> DHCP server -> Networks? Or in IP -> DNS? If only in first, clients never will use AD DNS for resolution.This is my DNS in MKT:
1.1.1.2 - 1.0.0.2
MKT is DHCP for LAN 192.168.110.0/24
And remove Winbox 3.25 from downloads and upgrade ASAP.IMHO You shold fix WinBox not ROS ASAP as upgrade to ROS > 6.47 is not always possible
Very poor signal, according to thisRSRP: -106 dBmHow are your signal levels (RSRP, RSRQ, etc.)
Regards.
RsRQ: -13.0 dB
SINR 7dB ( changing in limits from 5 to 10 )
https://wiki.mikrotik.com/wiki/Manual:CHR#freeThe free license level allows CHR to run indefinitely. It is limited to 1Mbps upload per interface.
Yes, the same hereHello
With Log window opened, minimize WinBox, then Restore. Log is always reverted to the beginning.
Anyone else seeing this?
Regards
i access my web server from internet all thing work fine
Yes it is completely empty.I'm not really sure if the RB1100 is in the "default settings are completely empty" category (like the CCR)...
/ip firewall filter
add action=accept chain=frorward dst-port=1723 protocol=tcp
Processor architecture, hAP is mipsbe, hAP Lite is smips.I don't know what smips device is, I have hAP and two hAP lites. Maybe I don't need the whole smips package.
Check Winbox version, it must be at least 3.19my RB750Gr3 with 6.41.5 version. After reboot it must be upgraded. But after that he did not start correctly, i can not seen him in winbox
Don't want to enable proxy-arp on LAN interface, to access devices on internal network.I assume you have good reasons to take all this burden (registry tweaking or implementing my trick) rather than running the L2TP/IPsec directly on the outer Mikrotik.
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether13WAN
Review firewall input chain, perhaps you have unnecessary ports or protocols open. Best practice is to close all, except only those you are using.i don't use IPSEC at all how can i disable it?
/radius
add address=192.168.7.70 secret=AgileroSecret123 service=ppp src-address=192.168.7.1
I can't ping my AD Server (192.168.7.70) using udp 1812/1813
reg add HKLM\SYSTEM\CurrentControlSet\Services\PolicyAgent /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
/caps-man provisioning add name-format=identity
/system backup save name=$filename password=xxxxx
:delay 3s
/export file=$filename
As the Winbox name suggests, it's a Windows Box.i have the right to use a winbox version that is compatible with my OS