Community discussions

MikroTik App

Search found 16 matches

by girts
Thu Sep 03, 2020 9:44 am
Forum: Scripting
Topic: -> doesn't work?!
Replies: 2
Views: 350

Re: -> doesn't work?!

Hello,

Use semicolon instead of comma:
:local week {"Sunday";"Monday";"Tuesday";"Wednesday";"Thursday";"Friday";"Saturday"};
by girts
Tue Sep 01, 2020 10:37 am
Forum: RouterBOARD hardware
Topic: Mikrotik wAP LR8 kit - LoRa - Loriot
Replies: 6
Views: 798

Re: Mikrotik wAP LR8 kit - LoRa - Loriot

Hello, In order to add your wAP LoRa kit to loriot.io do the following: 1) Press "Add gateway" in loriot.io, choose "Packet forwarder Semtech"; 2) In "eth0 MAC address" field paste MAC address of your wAP ether1 interface, enter the location details and press "Regi...
by girts
Fri Jun 26, 2020 3:19 pm
Forum: Beginner Basics
Topic: Lora8 kit: manage via lan?
Replies: 2
Views: 603

Re: Lora8 kit: manage via lan?

Hello, This device by default comes configuration, which is made considering ether1 as WAN port, not LAN, which is why there is firewall rule dropping packets, which comes from ether1 towards the device. If you want to access your wAP through ether1 by using IP address, the only thing you should do ...
by girts
Thu Jun 18, 2020 8:03 pm
Forum: RouterBOARD hardware
Topic: CSS326-24G-2S+ to RB960PGS with S+DA0001
Replies: 4
Views: 1598

Re: CSS326-24G-2S+ to RB960PGS with S+DA0001

Hello,
Turn off auto-negotiation and force 1G on the interfaces in both ends of the cable.
by girts
Thu May 21, 2020 2:35 pm
Forum: The Dude
Topic: Reading Syslog from MT [SOLVED]
Replies: 6
Views: 2332

Re: Reading Syslog from MT [SOLVED]

If you have enabled ssh, you could execute "/log print follow" command over an ssh connection.
In UNIX terminal:
ssh username@IP /log print follow
by girts
Mon Feb 03, 2020 10:47 am
Forum: General
Topic: LoRa Timeout
Replies: 5
Views: 2169

Re: LoRa Timeout

Hello, Keepalive packets are sent frequently to the server to let you know whether the server is accessible. If an answer is not received, this message is written to the log file. If you see this message, there is a chance that uplinks sent to the server around this moment will not reach the server....
by girts
Tue Jan 14, 2020 3:04 pm
Forum: Wireless Networking
Topic: [LoRa] forward to TTN and private LoRa-Server at the same time
Replies: 3
Views: 2228

Re: [LoRa] forward to TTN and private LoRa-Server at the same time

Hello,
Yes, if you will set multiple servers, all LoRaWAN frames will be forwarded to all the servers you have specified.
by girts
Mon Jan 13, 2020 4:14 pm
Forum: Wireless Networking
Topic: Lora -Internet [SOLVED]
Replies: 5
Views: 4211

Re: Lora -Internet [SOLVED]

hello please i want to ask could I use for example R11e-LoRa8 with RBM33G and connect RBM33G to internet and make Lora Wan server and use wAP LoRa8 kit as station to get internet from it because i am in poor area and there is no internet everywhere . or If there is any solution using LORA technique...
by girts
Mon Jan 06, 2020 6:16 pm
Forum: General
Topic: R11e-LoRa9/R11e-LoRa8 supported RB hardware
Replies: 7
Views: 1869

Re: R11e-LoRa9/R11e-LoRa8 supported RB hardware

Found the solution.
Just enter the tab:
SYSTEM - ROUTERBOARD - USB and set the USB Type to: Mini PCIe
That will do the trick und the LoRa8 device appears in the list.
I`m glad you figured it out. This is an good example showing that LoRa need those USB lines.
by girts
Fri Jan 03, 2020 6:15 pm
Forum: Wireless Networking
Topic: RB4011 PoE output + cAP ac PoE input without PoE injector??
Replies: 15
Views: 4715

Re: RB4011 PoE output + cAP ac PoE input without PoE injector??

Okay, I should be clearer, I do not understand how any of the switches can output that kind of voltage on ports?? The standard I get - if it states af it should be able to provide the required output but.......... how? Take the TP Link 105PE for example. Its power supply takes the 60Hz 120V from th...
by girts
Fri Jan 03, 2020 4:24 pm
Forum: Wireless Networking
Topic: RB4011 PoE output + cAP ac PoE input without PoE injector??
Replies: 15
Views: 4715

Re: RB4011 PoE output + cAP ac PoE input without PoE injector??

Short answer - yes, your described setup will work just fine. I agree that it could be a bit challenging if you have to take in account multiple parameters, multiple numbers instead of just one parameter - Power expressed in Watts, but actually it is not a rocket science. As others explained earlier...
by girts
Thu Jan 02, 2020 9:05 pm
Forum: General
Topic: R11e-LoRa9/R11e-LoRa8 supported RB hardware
Replies: 7
Views: 1869

Re: R11e-LoRa9/R11e-LoRa8 supported RB hardware

In other terms, it will work on any device which could be used with an LTE modem. It can be used with any of our products that have miniPCI-e slot (exceptions RB800 and RB4011). Also, if you have miniPCI-e to USB adapter, you could also connect the LoRa card to any RouterBoard with USB port, for exa...
by girts
Sat Dec 28, 2019 7:09 pm
Forum: RouterBOARD hardware
Topic: LoRaWAN support
Replies: 57
Views: 20289

Re: LoRaWAN support

I have RBM33G and RL11e-LoRa8 with ROS 6.47.1 (try a v6.47beta8, and more test, developer) but not working. Not display item on menu IP>lora. After reboot RB, light on green LED on Lora PCIe card up 5sec. LED off. I try second PCIe slot, no result. Any idea? Are you sure that you have installed lor...
by girts
Wed Dec 18, 2019 4:32 pm
Forum: Wireless Networking
Topic: LoRa - Can't JOIN EU TTN network [SOLVED]
Replies: 3
Views: 4231

Re: LoRa - Can't JOIN EU TTN network [SOLVED]

Hello,
Please, generate supout.rif file on your device and send it us using our new service desk portal https://help.mikrotik.com/servicedesk/.
Also, please, add screenshots of channel configuration used on your other brand gateway.
by girts
Tue Dec 17, 2019 11:27 am
Forum: Beginner Basics
Topic: Mikrotik Lora with chirpstack server
Replies: 1
Views: 1410

Re: Mikrotik Lora with chirpstack server

Hello, You cannot choose over multiple forwarders as there is only one. Just add your ChirpStack server to servers list in menu /lora servers add name=yourname address=youraddress up-port=1700 down-port=1700, configure your LoRa GW to use this server with command /lora set 0 servers=yourname disable...