Community discussions

MikroTik App

Search found 739 matches

by ConnyMercier
Mon Jan 24, 2022 2:13 pm
Forum: General
Topic: How can I remote my device everywhere with Mikrotik Mobile app [SOLVED]
Replies: 4
Views: 850

Re: How can I remote my device everywhere with Mikrotik Mobile app [SOLVED]

Answer to Question 1: If your Mikrotik-Router has a direct connection to the Internet (no NAT), It is possible to connect to your device from anywhere via the MikroTik app. The default Config from Mikrotik , doesn`t allow this, because of Security concerns. But if you modify the Firewall, you can al...
by ConnyMercier
Mon Jan 24, 2022 1:49 pm
Forum: RouterBOARD hardware
Topic: Mikrotik Routerboard - Is it good
Replies: 2
Views: 1301

Re: Mikrotik Routerboard - Is it good

RouterOS ist quite good for VPN, DynDNS, DHCP, Routing, Firewall and Co You have a lot of Hardware to chouse from, depending on your needs (interfaces, Performances, etc..) If you are not sure if Mikrotik /RouterOS is the right solution for you, you can try it out on a Virtual-Maschine for Free (htt...
by ConnyMercier
Mon Jan 24, 2022 1:33 pm
Forum: General
Topic: Autosensing passive PoE?
Replies: 11
Views: 1147

Re: Autosensing passive PoE?

I like "passive PoE detection" Feature, because it removes the Voltage, if the device gets disconnected For Exemple: Preventing us during a troubleshooting Session from blowing up our Laptops :D Until now, we haven`t experienced any of the Problems you mentioned on our Customer-Networks. M...
by ConnyMercier
Mon Jan 24, 2022 10:55 am
Forum: General
Topic: Autosensing passive PoE?
Replies: 11
Views: 1147

Re: Autosensing passive PoE?

I concur with @millenium7, 802.3af/at standard PoE works every time and absolutely no risk of blowing up Network-device !!! BUT, I work with a lot of old & new industrial Network-Device that don`t support standard PoE IEEE 802.X. Mikrotik passive PoE detection is a WAY, WAY better solution, then...
by ConnyMercier
Mon Jan 24, 2022 10:30 am
Forum: General
Topic: Fast-Track not working - was: How to test bandwidth properly [SOLVED]
Replies: 25
Views: 4253

Re: Fast-Track not working - was: How to test bandwidth properly [SOLVED]

Good Morning,

I don`t understand why it isn`t working .
I will have to do some test in my LAB tonight
and i will get back to you !
by ConnyMercier
Thu Jan 20, 2022 3:24 pm
Forum: General
Topic: Fast-Track not working - was: How to test bandwidth properly [SOLVED]
Replies: 25
Views: 4253

Re: How to test bandwidth properly [SOLVED]

I think your Link is 1000Mbits. In the Picture you posted, you can see the Parameter "Link Partner Advertising" And 2.5Gbits is missing I looked a bit in the Forum, mikrotik doesn`t have manual 2.5 and 5Gbits at the moment. You can play with Auto-Negotiate and Advertising on both device Un...
by ConnyMercier
Thu Jan 20, 2022 3:13 pm
Forum: General
Topic: VRRP and ISP failover?
Replies: 10
Views: 1962

Re: VRRP and ISP failover?

Everything seams to be O.K !

Good Luck =)
by ConnyMercier
Thu Jan 20, 2022 3:10 pm
Forum: General
Topic: Fast-Track not working - was: How to test bandwidth properly [SOLVED]
Replies: 25
Views: 4253

Re: How to test bandwidth properly [SOLVED]

The Adapter (SFP+/Ethernet) may be the problem.
Auto-Negotiation doesn`t always work.
You may want to check what speed they negotiate or set it manually .
by ConnyMercier
Thu Jan 20, 2022 2:54 pm
Forum: General
Topic: Fast-Track not working - was: How to test bandwidth properly [SOLVED]
Replies: 25
Views: 4253

Re: How to test bandwidth properly [SOLVED]

In the Config you send me , the SFP+ interface is disabled.
set [ find default-name=sfp-sfpplus1 ] disabled=yes
Maybe you are connected via a 1Gbits Interface... This would explain the Speed =)
by ConnyMercier
Wed Jan 19, 2022 4:11 pm
Forum: General
Topic: Fast-Track not working - was: How to test bandwidth properly [SOLVED]
Replies: 25
Views: 4253

Re: How to test bandwidth properly [SOLVED]

Guten Tag, Sorry for the delay , had other problems to take care of =) Try implementing FastTrack in your Firewall. This will relieve your CPU-Workload and give you more Thuput , especially between LAN`s. (https://wiki.mikrotik.com/wiki/Manual:IP/Fasttrack) If you need help implementing the rules, j...
by ConnyMercier
Wed Jan 12, 2022 1:02 pm
Forum: General
Topic: Fast-Track not working - was: How to test bandwidth properly [SOLVED]
Replies: 25
Views: 4253

Re: How to test bandwidth properly [SOLVED]

1. RouterOS Config If possible, please POST the Config of the RB5009 (/export hide-sensitive file=anynameyouwish) 2. Test-Parameters Can you also Post your iPerf-Test parameter P.S: The 7479.1 Mbit/s only works for Transfer of 1518 byte I recommend using 2557.1 Mbps as a real world Reference Value.
by ConnyMercier
Tue Jan 11, 2022 1:48 pm
Forum: RouterBOARD hardware
Topic: For those who has Wireless Wire Cube
Replies: 3
Views: 2089

Re: For those who has Wireless Wire Cube

I used different solutions in the past... Solution 1: Custom Adapter We build for a customer a custom Holder based on the Mikrotik QMP https://mikrotik.com/product/QMP-LHG I you don`t have the tools or Workshop to jerry-rig you own Adapter. Maybe the Mikrotik QMP can be easily modified for the WireC...
by ConnyMercier
Tue Jan 11, 2022 10:34 am
Forum: Beginner Basics
Topic: Wireless Access Point
Replies: 1
Views: 538

Re: Wireless Access Point

You will need to configure your device as a Wireless repeater.

https://help.mikrotik.com/docs/display/ ... e-Repeater
by ConnyMercier
Sun Jan 09, 2022 8:26 pm
Forum: The Dude
Topic: dummy question [SOLVED]
Replies: 10
Views: 3133

Re: dummy question [SOLVED]

If RouterOS Ver.6 is installed , you should be able to install and run The Dude-Server

*Dude-Server isn`t availeble at the moment for Ver.7
by ConnyMercier
Sun Jan 09, 2022 8:21 pm
Forum: General
Topic: Bandwidth is reduced between Mikrotik equipment
Replies: 3
Views: 532

Re: Bandwidth is reduced between Mikrotik equipment

If possible, please POST the Config of both Device
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Sun Jan 09, 2022 8:18 pm
Forum: The Dude
Topic: dummy question [SOLVED]
Replies: 10
Views: 3133

Re: dummy question [SOLVED]

You will not be able to install the Dude-Server on any MIPSBE-Device.

If you want to Test and / or play with the Dude, i suggest you use someting like the hEX S or CHR
by ConnyMercier
Mon Jan 03, 2022 1:05 pm
Forum: Beginner Basics
Topic: usb ethernet no detect mikrotik
Replies: 1
Views: 637

Re: usb ethernet no detect mikrotik

"Detect" will only work if Neighbor Discovery Protocol is active. Depending on the Config, this may only be active from a specific Interface / VLAN. If your computer (Winbox) isn`t able to see or detect the device, Try connecting to it via the MAC-Address . This is easy because all Mikroti...
by ConnyMercier
Mon Jan 03, 2022 3:10 am
Forum: Beginner Basics
Topic: Miktrotik RB5009 2.5G Port
Replies: 1
Views: 1158

Re: Miktrotik RB5009 2.5G Port

Check the Advertise-Speeds on the Interface
Make sure 2.5G is advertise....
For diagnostic purposes maybe only advertise 2.5G and remove everything else.
2022-01-03_02-01-43.jpg
by ConnyMercier
Mon Jan 03, 2022 2:47 am
Forum: Beginner Basics
Topic: Mikrotik RB4011iGS & Unifi
Replies: 1
Views: 1035

Re: Mikrotik RB4011iGS & Unifi

You could theoretically segregate the Network physically This methode is sometimes used in very very Small Networks and/or if you don`t want to use VLAN Config-Exemple : Use the RB4011 SFP+ & UniFi 48 Port-Switch for Staff Network Use the RB4011 ether 1-5 & UniFi 16 Port-Switch for Guest Net...
by ConnyMercier
Mon Jan 03, 2022 2:28 am
Forum: RouterBOARD hardware
Topic: Automotive connector on LtAP LR8 LTE kit?
Replies: 1
Views: 2377

Re: Automotive connector on LtAP LR8 LTE kit?

A couple of years back (~2018), I bought a wAP LTE
It also had a "Automotive-Connector" with the description
The upper two (AUX) are reserved for future use


2022, The Future hasn`t arrived yet =)


viewtopic.php?t=126294
by ConnyMercier
Mon Jan 03, 2022 2:07 am
Forum: Scripting
Topic: 7.1.1 firewall connection
Replies: 4
Views: 1774

Re: 7.1.1 firewall connection

Try this,
/ip firewall connection print count-only interval=1 where dst-address~":1701" || src-address~":1701"
by ConnyMercier
Mon Jan 03, 2022 1:43 am
Forum: Scripting
Topic: add ip route rules from dynamic address-list [SOLVED]
Replies: 2
Views: 1838

Re: add ip route rules from dynamic address-list [SOLVED]

Queston 1: how to remove first line output, in this case "geoip.hotstar.com.edgekey.net" from output my script. Answer: :foreach i in=[/ip firewall address-list find where list=geo-ip-hotstar] do={ :if ([typeof [toip [/ip firewall address-list get $i address]]] = "ip") do={ #Ite...
by ConnyMercier
Mon Jan 03, 2022 1:06 am
Forum: Scripting
Topic: 7.1.1 firewall connection
Replies: 4
Views: 1774

Re: 7.1.1 firewall connection

Can you elaborate more on how you use the command,
and maybe provide the Script or Scheduler you use it in ?

I quickly tested the command in a script without error on both 6.49.1 and 7.1.1
by ConnyMercier
Sun Jan 02, 2022 10:38 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

So i did some more Test....
I don`t understand exactly why, but if you delete Fasttrack and Restart the Router it may work


enter this in a CLI and then Reboot
/ip firewall filter remove [find action=fasttrack-connection]
by ConnyMercier
Sun Jan 02, 2022 10:02 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

@sindy , your are right !
I still testet both DNS-Server .... they work fine !


I am out of deas....
Imported the Config in a Lab-Router
It is also double NATed

My Laptop and Cellphone are able to connect to Discord and
both the Android-App AND the Website (discord.com) trigger the Filter-Rules
by ConnyMercier
Sun Jan 02, 2022 9:53 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

Thanks @Sindy for the Backup =)

Could the DNS-Servers be the Problem?
by ConnyMercier
Sun Jan 02, 2022 9:33 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

So the only cable connected to the Mikrotik is ether1 ? And can you try adding these Firewall Rule, And tell me if the Rules get Traffic , when you are surfing the Web and accessing www.discord.com Thanks! /ip firewall filter add action=passthrough chain=forward comment="TEMP Internet Traffic-C...
by ConnyMercier
Sun Jan 02, 2022 9:18 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

Q1: Do your device behind the Router have internet?
Q2: What Network-Cable are connected to your Router and where do they go ?
by ConnyMercier
Sun Jan 02, 2022 9:12 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

That is weird ....
In the Export the DHCP-Client isn`t disabled
/ip dhcp-client
add comment=defconf interface=ether1
by ConnyMercier
Sun Jan 02, 2022 8:52 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

For some reason or another, the DHCP-Client is still active .....
Can you please reenter this in a CLI
/ip dhcp-client disable [find interface=ether1]
by ConnyMercier
Sun Jan 02, 2022 8:24 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

Can you please Post the latest Config ?
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Sun Jan 02, 2022 8:02 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

If you enter this in a CLI, it should rectify your Setup
/ip address set [find address="192.168.66.1/24"] interface=bridge
/ip address set [find address="192.168.88.32/8"] address="192.168.88.32/24"
/ip dhcp-client disable [find interface=ether1]
by ConnyMercier
Sun Jan 02, 2022 7:37 pm
Forum: General
Topic: Is it necessary for me to install a second firewall?
Replies: 4
Views: 1029

Re: Is it necessary for me to install a second firewall?

It depends...... Yes, Mikrotik / RouterOS has a Firewall and it`s quite good. For a lot of SME-Environment, the default Mikrotik-Firewall is enough. It always depends on the application and your requirements And of course , don`t expect a 200$ Router to have the same as a High-End 2000$ Firewall wit...
by ConnyMercier
Sun Jan 02, 2022 7:22 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

Do you need help to rectify the Config?
by ConnyMercier
Sun Jan 02, 2022 7:12 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

Your Config is....let say Unique =) Problem 1: You have created a Bridge and assigned your Interfaces to the LAN. But for some reason you have assigned IP-Address and in turn DHCP-Server to a "Slave" Interface. This can create Problems Wrong: /ip address add address=192.168.66.1/24 comment...
by ConnyMercier
Sun Jan 02, 2022 6:44 pm
Forum: RouterBOARD hardware
Topic: Redundant power for CCR1009-7G-1C-1S+ ? [SOLVED]
Replies: 3
Views: 2235

Re: Redundant power for CCR1009-7G-1C-1S+ ? [SOLVED]

No Problem !

The CCR1009-7G-1C-1S+ is a great Router.
I use them all the time , never had a Problem with them =)
by ConnyMercier
Sun Jan 02, 2022 6:41 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

Is it possible to Post your Config ?
(/export hide-sensitive file=anynameyouwish)


I am not able to reproduce your Problem in my LAB
As soon as I add your Firewall-Rule, the Address-List gets populated,
as soon as i open the Browser and enter discord.com
by ConnyMercier
Sun Jan 02, 2022 6:31 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

How do you test your Rules ?
Did you try opening a Web-Browser and entering www.discord.com?
by ConnyMercier
Sun Jan 02, 2022 6:05 pm
Forum: RouterBOARD hardware
Topic: Redundant power for CCR1009-7G-1C-1S+ ? [SOLVED]
Replies: 3
Views: 2235

Re: Redundant power for CCR1009-7G-1C-1S+ ? [SOLVED]

Answer to Question 1: Yes you can use PoE-Input and AC-Input simultaneously to provide Power to your Device. Be aware the CCR1009-7G-1C-1S+ need up to 39 Watts. So be sure to choose the proper Power-Supply 12V@3.34A 24V@1.7A 48V@0.84A ** I personnaly would use 24V or higher To keep to AMP`s under 2A...
by ConnyMercier
Sun Jan 02, 2022 3:55 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

jan/02/2022 14:53:16 by RouterOS 7.1.1 # model = RBD25G-5HPacQD2HPnD ip firewall filter add chain=forward action=add-dst-to-address-list protocol=tcp address-list=discord_ips address-list-timeout=30d dst-port=443 log=yes log-prefix="%%IPLIST-I-" tls-host=*discord.com* comment="Dynamic...
by ConnyMercier
Sun Jan 02, 2022 3:30 pm
Forum: General
Topic: Cannot get address list created automatically [SOLVED]
Replies: 40
Views: 2352

Re: Cannot get address list created automatically [SOLVED]

I did some quick test ....
It seams the "place-before" argument isn`t ALWAYS working in 7.1.1

probably just a bug...
by ConnyMercier
Fri Dec 31, 2021 7:44 pm
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S-RM + Audience POE Warning
Replies: 15
Views: 5454

Re: CRS328-24G-4S-RM + Audience POE Warning

@smyers119, That strange the Mikrotik Website, says something else
2021-12-31_18-38-41.jpg

I don`t know if i can edit the Voltage, but my CRS328 provides 26V & 52V
That would mean,
High-Voltage = 52 V * 450 mA = 23.4 Watts
Low-Voltage = 26 V * 1000 mA = 26 Watts
by ConnyMercier
Fri Dec 31, 2021 6:53 pm
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S-RM + Audience POE Warning
Replies: 15
Views: 5454

Re: CRS328-24G-4S-RM + Audience POE Warning

Thank you for the Feedback! I have been keeping an eye on my Audiance.. In normal use i don`t exceed 17 Watts of power. Maybe you have more Clients, longer Cables or a more demanding Config/Setup Mikrotik say the Audiance can need up to 27 Watts :( Even the CRS328-24P-4S+RM can`t provide that kind o...
by ConnyMercier
Fri Dec 31, 2021 2:25 am
Forum: Scripting
Topic: Script doesn't execute (completely) on boot
Replies: 2
Views: 1623

Re: Script doesn't execute (completely) on boot

My Test with a Mikrotik-Audiance, concure your Results, After a Reboot, the Scheduler was active and executing Scripts , approximatly 13 seconds before any of the Interfaces where Up-and-Running in RouterOS. I did some Quick test (i am no Scripting-Guru) You can use a Loop to wait for the Interface ...
by ConnyMercier
Thu Dec 30, 2021 1:56 pm
Forum: Scripting
Topic: how to get only IP from print lease
Replies: 10
Views: 2761

Re: how to get only IP from print lease

RouterOS ver 7 or higher :global c3 "PC4SEARCH" :foreach i in=[/ip/dhcp-server/lease/find where comment~$c3] do={:put ([/ip/dhcp-server/lease/get $i address])} RouterOS ver 6 :global c3 "PC4SEARCH" :foreach i in=[/ip dhcp-server lease find where comment~$c3] do={:put ([/ip dhcp-s...
by ConnyMercier
Wed Dec 29, 2021 7:48 pm
Forum: General
Topic: Traffic-Monitor Tool Always Trigger Explain
Replies: 4
Views: 826

Re: Traffic-Monitor Tool Always Trigger Explain

If you want to Test and/or play with this feature yourself .

You can quite easily use the Mikrotik Bandwidth-Tool to generate Traffic,
to a second Mikrotik-Device or even a Windows-Computer.

This makes it easy to Trigger the Traffic-Monitor
by ConnyMercier
Wed Dec 29, 2021 3:40 pm
Forum: General
Topic: Traffic-Monitor Tool Always Trigger Explain
Replies: 4
Views: 826

Re: Traffic-Monitor Tool Always Trigger Explain

I did some quick test,

The Traffic-Monitor can be set to trigger "above" or "below" a certain Threshold.
If you set "Always" it will trigger on both events ( "above" or "below")
by ConnyMercier
Wed Dec 29, 2021 3:02 pm
Forum: Scripting
Topic: monitor active ethernetports
Replies: 1
Views: 1390

Re: monitor active ethernetports

I don`t have any experience with the Dude-Server , so i can`t help you But here is a Basic Script to print the number of active Ports. # Active Interface Count :local AIC 0 :foreach i in=[interface ethernet find where running=yes] do={:set $AIC ($AIC + 1)} :put message="Active Interface = $AIC&...
by ConnyMercier
Wed Dec 29, 2021 2:55 pm
Forum: Beginner Basics
Topic: SWITCHING AND MANAGEMENT VLAN [SOLVED]
Replies: 3
Views: 737

Re: SWITCHING AND MANAGEMENT VLAN [SOLVED]

Almost !!! Very small mistake in the Bridge VLAN-Filtering Here is you mistake: You need to add the bridge-Interface as "Tagged" If you want the Mikrotik-Device to be able to Talk with the VLAN Simply replace or edit this part : /interface bridge vlan add bridge=BR0 tagged=ether1,ether2 un...
by ConnyMercier
Mon Dec 27, 2021 10:02 pm
Forum: Wireless Networking
Topic: Slow Wireless Speed on hAP ac³
Replies: 3
Views: 1640

Re: Slow Wireless Speed on hAP ac³

Mikrotik isn`t known to have the fastest Wireless-Network If "Speed" on a single Devices is important to you, the quick and easy Solution is to upgrade to RouterOS 7.1.1 On the hAP ac³, it is possible to install the WifiWave2 -Package, that offers a new wireless driver, supporting 802.11ac...
by ConnyMercier
Mon Dec 27, 2021 9:28 pm
Forum: General
Topic: CRS3XX surge protection
Replies: 1
Views: 756

Re: CRS3XX surge protection

If you need to protect your device againts electrical Surges over ethernet-Ports, you will need to buy some Ethernet Surge Protectors (It`s recommended to use a surge protector on both ends) Many solutions out there.. Mikrotik offers some Solutions : https://mikrotik.com/product/rbgesp https://mikro...
by ConnyMercier
Mon Dec 27, 2021 6:40 pm
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S-RM + Audience POE Warning
Replies: 15
Views: 5454

Re: CRS328-24G-4S-RM + Audience POE Warning

Thanks for the Feedback!

I also updated to the RouterOS 7.1.1
wifiwave2 ist quite stable and performance is awsome
by ConnyMercier
Mon Dec 27, 2021 6:34 pm
Forum: Wireless Networking
Topic: hAP ac3 wifiwave2
Replies: 4
Views: 2383

Re: hAP ac3 wifiwave2

My preliminary findings, shows not only an increase in Performance (aka. Speeds) but with RouterOS 7.1.1 an addition in Network Stability (less disconnects , etc..) I experienced an improvement of around 20 to 30% in Speeds (Mbps) But some guys on the Forum have claim up to 50% perfromance increase....
by ConnyMercier
Mon Dec 27, 2021 11:26 am
Forum: General
Topic: Disable logging
Replies: 2
Views: 643

Re: Disable logging

The default Mikrotik config will Log event of following "Typics": critical , error , warning and info You can edit what (Rules) and how (Actions) something is to be logged via the Logging-Menu (See attachement) In the Exemple you have provided, the Event was tagged as a "Firewall"...
by ConnyMercier
Mon Dec 27, 2021 12:52 am
Forum: Beginner Basics
Topic: Struggling with bridge/VLAN configuration
Replies: 16
Views: 2525

Re: Struggling with bridge/VLAN configuration

you are welcome and Happy Holidays!
by ConnyMercier
Sun Dec 26, 2021 11:01 pm
Forum: Beginner Basics
Topic: MIkrotik app on Android
Replies: 16
Views: 2108

Re: MIkrotik app on Android

Good idea...

Happy Holiday and Guten Rutsch =)
by ConnyMercier
Sun Dec 26, 2021 10:22 pm
Forum: RouterBOARD hardware
Topic: RB5009 power IN voltage range
Replies: 7
Views: 3590

Re: RB5009 power IN voltage range

@gabacho4

Thank you for trying to help...

FYI :

Watts = Voltage x Amps
PoE+ has a Voltage between 42,5–57V
by ConnyMercier
Sun Dec 26, 2021 9:52 pm
Forum: Wireless Networking
Topic: No internet on guest Wi-Fi [SOLVED]
Replies: 17
Views: 3246

Re: No internet on guest Wi-Fi [SOLVED]

Thanks DAD !

=)
by ConnyMercier
Sun Dec 26, 2021 9:49 pm
Forum: Beginner Basics
Topic: MIkrotik app on Android
Replies: 16
Views: 2108

Re: MIkrotik app on Android

Hmmmmm.....
Did you try connecting to the Device via IP-Address AND via MAC-Address?
by ConnyMercier
Sun Dec 26, 2021 9:23 pm
Forum: Beginner Basics
Topic: MIkrotik app on Android
Replies: 16
Views: 2108

Re: MIkrotik app on Android

Laptop was able to connect to the Router via the same Wireless-Connection?

lol @holvoetn was quicker =)
by ConnyMercier
Sun Dec 26, 2021 8:41 pm
Forum: Wireless Networking
Topic: No internet on guest Wi-Fi [SOLVED]
Replies: 17
Views: 3246

Re: No internet on guest Wi-Fi [SOLVED]

Yes , that`s the mistake =)
by ConnyMercier
Sun Dec 26, 2021 7:56 pm
Forum: Beginner Basics
Topic: MIkrotik app on Android
Replies: 16
Views: 2108

Re: MIkrotik app on Android

Mikrotik has two Android App`s
"Mikrotik Home" and "Mikrotik Pro"

Try the "Mikrotik Pro" app
by ConnyMercier
Sun Dec 26, 2021 6:35 pm
Forum: Beginner Basics
Topic: Struggling with bridge/VLAN configuration
Replies: 16
Views: 2525

Re: Struggling with bridge/VLAN configuration

This is how you need to modify your original config for Network "LAN" to be unttagged. The trick is to assign everything to the "bridge1" interface and not a a "bridge1_vlan1" Step 1: Create Bridge /interface bridge add name=bridge1 Step 2: Create and Assign VLAN /inter...
by ConnyMercier
Sun Dec 26, 2021 6:13 pm
Forum: Beginner Basics
Topic: Struggling with bridge/VLAN configuration
Replies: 16
Views: 2525

Re: Struggling with bridge/VLAN configuration

Connie you outdid yourself. No Problem, I had some spare time! i'm glad to help =) LAN uses VLAN1 Its usually "Best Practice" not to mix Untagged and Tagged Networks... Network without tags aka VLAN 1 , will make it more difficult to learn/understand VLANs. But it is possible... Reading m...
by ConnyMercier
Sun Dec 26, 2021 4:58 pm
Forum: Beginner Basics
Topic: Same wifi spot, two microtic routers
Replies: 2
Views: 679

Re: Same wifi spot, two microtic routers

Solution 1: You can configure both device with the same SSID and Password. The Client will then be able to connect to both AP`s. Solution 2: If you don`t want to manage your Wireless-AP`s separately.. You can use the Capsman-Feature of Mikrotik to manage them centrally. https://wiki.mikrotik.com/wik...
by ConnyMercier
Sun Dec 26, 2021 4:46 pm
Forum: Wireless Networking
Topic: No internet on guest Wi-Fi [SOLVED]
Replies: 17
Views: 3246

Re: No internet on guest Wi-Fi [SOLVED]

However, nothing answers also on 192.168.0.1 Because your Router wasn`t assigned the 192.168.0.1 IP-Address... You have an Error in your Config: /ip address add address=192.168.88.1/24 comment=defconf interface=local network=192.168.88.0 add address= 192.168.0.0/24 interface=guest network=192.168.0.0
by ConnyMercier
Sun Dec 26, 2021 3:45 pm
Forum: Beginner Basics
Topic: Struggling with bridge/VLAN configuration
Replies: 16
Views: 2525

Re: Struggling with bridge/VLAN configuration

Step 0: Management Port It`s quite common to lock yourself out, while configuring a Bridge with VLAN-Filtering. So I recommend connection via a PORT, that isn`t being assigned to the bridge and isn`t Block by Firewall and Co. Step 1: Create Bridge /interface bridge add name=bridge1 Step 2: Create a...
by ConnyMercier
Sun Dec 26, 2021 2:17 pm
Forum: Beginner Basics
Topic: Struggling with bridge/VLAN configuration
Replies: 16
Views: 2525

Re: Struggling with bridge/VLAN configuration

Do you need more help?

Do you know how to configure the bridge & VLAN-Filtering..
or do you need a step-by-Step guide?
by ConnyMercier
Sun Dec 26, 2021 2:16 pm
Forum: Beginner Basics
Topic: Struggling with bridge/VLAN configuration
Replies: 16
Views: 2525

Re: Struggling with bridge/VLAN configuration

The Quick and dirty explanation ist ,

You will need to create a bridge and assign all LAN-Interfaces to it.
Create and Assign VLAN`s to bridge insteed of ether-Ports

You can use Bridge VLAN-Filtering to limit the VLAN`s to specific Port and/or create Trunk-Ports
by ConnyMercier
Sun Dec 26, 2021 1:23 pm
Forum: General
Topic: Shutdown or not to shutdown
Replies: 6
Views: 926

Re: Shutdown or not to shutdown

Good Question.... NEVER , do i improperly shutdown a device, that is "Live" in the Data-Center. I always log in and execute a proper Shutdown. Even if our experience has shown, that nothing bad will happen! I simply , don`t want to tempt fate =) But for non critical devices , i do it all t...
by ConnyMercier
Sun Dec 26, 2021 12:51 pm
Forum: Wireless Networking
Topic: 12 volt to power hap ac3
Replies: 6
Views: 2960

Re: 12 volt to power hap ac3

You need to break down the issue into three seperate problem. Problem 1: Target Voltage/Current You need to know the Power requirement of your device. Voltage is easy, because you only have 12V.. Current is a bit more tricky... It depends HOW you use the hAP ac³ I think you should consider ~ 18 Watt...
by ConnyMercier
Sat Dec 25, 2021 3:42 pm
Forum: General
Topic: RouterOS hardware requirements
Replies: 6
Views: 1065

Re: RouterOS hardware requirements

But i have to admit, it is somewhat confusing ...
25-12-_2021_14-40-36.jpg
by ConnyMercier
Fri Dec 24, 2021 8:28 pm
Forum: General
Topic: RouterOS hardware requirements
Replies: 6
Views: 1065

Re: RouterOS hardware requirements

I think amazon mean: it uses a OS for Routers
RouterOS isn`t the same thing as Mikrotik RouterOS


Mikrotik RouterOS runs only on Mikrotik device or hostet on x86 Hardware
by ConnyMercier
Thu Dec 23, 2021 12:43 am
Forum: General
Topic: What is this? "added support for usb forwarding over tcp"
Replies: 31
Views: 12846

Re: What is this? "added support for usb forwarding over tcp"

If you need a USB over TCP Solution today ...

I highly recommend W&T -> https://www.wut.de/e-53www-15-inus-000.php
Use there Product all the time in 24/7 environment and they have PoE-Powering options

They are not cheap, but they are very good quality!
by ConnyMercier
Wed Dec 22, 2021 11:58 pm
Forum: General
Topic: Canot remove builtin
Replies: 6
Views: 764

Re: Canot remove builtin

You need to remove filter-Rule #4 defconf:fasttrack
(aka. Blue symbole )
by ConnyMercier
Wed Dec 22, 2021 11:48 pm
Forum: General
Topic: Canot remove builtin
Replies: 6
Views: 764

Re: Canot remove builtin

easy Script to remove all Fasttrack rules :
/ip firewall filter remove [find where action=fasttrack-connection]
by ConnyMercier
Wed Dec 22, 2021 11:44 pm
Forum: General
Topic: Canot remove builtin
Replies: 6
Views: 764

Re: Canot remove builtin

Remove all "fasttrack connection" filter rule under /ip firewall filter
Restart the router and the "buildin" rules will be gone
by ConnyMercier
Wed Dec 22, 2021 9:43 pm
Forum: General
Topic: DHCP Server Interim Updates
Replies: 2
Views: 743

Re: DHCP Server Interim Updates

Something like this ?
Sadly i think "DHCP" is for both Server and Client...
2021-12-22_20-41-56.jpg
by ConnyMercier
Wed Dec 22, 2021 9:36 pm
Forum: General
Topic: Mikrotik Routerboard Hap Ac2 Rbd52g-5hacd2hnd
Replies: 4
Views: 864

Re: Mikrotik Routerboard Hap Ac2 Rbd52g-5hacd2hnd

Export / Import of the config should work without a problem.

Don`t worry !
by ConnyMercier
Wed Dec 22, 2021 9:15 pm
Forum: Beginner Basics
Topic: Upgraded to 6.49.2 - no more access - "Wrong Username or Password" [SOLVED]
Replies: 22
Views: 2723

Re: Upgraded to 6.49.2 - no more access - "Wrong Username or Password" [SOLVED]

Your house needs a key to enter.
Your car needs a key to use.
:lol: :lol:

I used to live in Canada, i never had to lock my doors , haus or car :D


Maybe if your Router is in Canada you don`t need a password =P
by ConnyMercier
Wed Dec 22, 2021 9:07 pm
Forum: General
Topic: Why can't I see the PPP folder? [SOLVED]
Replies: 2
Views: 557

Re: Why can't I see the PPP folder? [SOLVED]

2021-12-22_20-05-09.jpg
You need to take a look under "Packages" to install / activate PPP
After that it should be availeble in the winbox menu,
by ConnyMercier
Tue Dec 21, 2021 12:39 pm
Forum: RouterBOARD hardware
Topic: New Switches on the Way?
Replies: 2
Views: 2688

Re: New Switches on the Way?

a CRS328 with 2.5Gbps would be awesome :mrgreen:

not only for Wifi6-AP`s
more and more Computers have mainboards with 2.5Gbps
For a lot of graphic designer (Adobe and co.) or engineers (Solidworks, Autodesk, etc..)
working off of network resources, it would be a big improvement
by ConnyMercier
Tue Dec 21, 2021 9:36 am
Forum: RouterOS beta and rc versions
Topic: RB2011 NTP Client not working
Replies: 25
Views: 3184

Re: RB2011 NTP Client not working

English please , so everybody can understand and help !
by ConnyMercier
Tue Dec 21, 2021 9:12 am
Forum: RouterOS beta and rc versions
Topic: RB2011 NTP Client not working
Replies: 25
Views: 3184

Re: RB2011 NTP Client not working

Did you rule out a DNS-Problem ?

What happends when you use 10.5.51.1 insteed of ntp.day.ir..
by ConnyMercier
Mon Dec 20, 2021 11:13 pm
Forum: Beginner Basics
Topic: Dual WAN, very slow port forward on second wan. [SOLVED]
Replies: 11
Views: 1532

Re: Dual WAN, very slow port forward on second wan. [SOLVED]

I wasn't able to find the root issue, why only the Vodafon-WAN is slower. Did you monitor CPU usage on your device ? Maybe you are achieving the performance limits of your Router? Extra ! Extra ! while looking at your config, saw a posible miss configuration, Firewall: You don`t have any Firewall-Ru...
by ConnyMercier
Mon Dec 20, 2021 10:30 pm
Forum: Wireless Networking
Topic: Wireless Advantage VWLANS but Limitations?
Replies: 7
Views: 2285

Re: Wireless Advantage VWLANS but Limitations?

Yes, very nice Question indeed.... I always assumed any number of vWLAN had performance degradation. So for small Networks with the need of multiple Wireless-Networks, I usually use the Access-List to assign them to the Network For exemple: Guest : VLAN100 via default TAG (wireless interface) Camera...
by ConnyMercier
Mon Dec 20, 2021 8:08 am
Forum: General
Topic: [META] forums.mikrotik.com Outage? [SOLVED]
Replies: 7
Views: 1185

Re: [META] forums.mikrotik.com Outage? [SOLVED]

Forum wasn`t available for most of the day on Sunday
Forum-Post from the morning aren't there anymore
by ConnyMercier
Thu Dec 16, 2021 10:43 pm
Forum: Wireless Networking
Topic: VLAN BETWEEN 951Ui-2HnD x RBcAPGi-5acD2nD ON WIFI
Replies: 1
Views: 1627

Re: VLAN BETWEEN 951Ui-2HnD x RBcAPGi-5acD2nD ON WIFI

Yes it is possible....

You can set a default VLAN-Tag for all connected device,
on the Wireless-Interfaces on your Mikrotik-Device.
(Exemple: vlan-id=123 vlan-mode=use-tag)


If you need Help with your Setup
Please Post Config of the 951Ui
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Thu Dec 16, 2021 7:10 pm
Forum: General
Topic: VRRP and ISP failover?
Replies: 10
Views: 1962

Re: VRRP and ISP failover?

would that achieve the objective of having each subnet using a separate ISP link? The Segregation of Traffic over two separate ISP link, as "nothing" to do with VRRP. You can configure your VRRP-Routers as you would any Router. Mangel & Tag Traffic, use QoS, Firewall, PCC, etc.... In ...
by ConnyMercier
Thu Dec 16, 2021 7:02 pm
Forum: General
Topic: VRRP and ISP failover?
Replies: 10
Views: 1962

Re: VRRP and ISP failover?

You need to configure 2 VRRP 1 for the 192.168.0.0/24 Network 1 for the 172.16.0.0/20 Network With the Paramter "Priority" you can set where the VRRP run's per default In oder words / Exemple: RB3011 VRRP (192.168.0.0/24) Priority=200 RB3011 VRRP (172.16.0.0/20) Priority=100 RB450 VRRP (19...
by ConnyMercier
Thu Dec 16, 2021 6:20 pm
Forum: Beginner Basics
Topic: Firewall question.
Replies: 10
Views: 1220

Re: Firewall question.

How is the wetter on Mars ? :D like @anav already sayed, Firewall isn`t optimal. The Quick solution to solve your Problem, would be to use an Address-List to Block known Attackers. Something like this : Step 1: Create and populate Address-List /ip firewall address-list add address=78.128.113.66 list...
by ConnyMercier
Thu Dec 16, 2021 2:53 pm
Forum: Beginner Basics
Topic: Firewall question.
Replies: 10
Views: 1220

Re: Firewall question.

If possible, please POST the Config of your Device
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Thu Dec 16, 2021 11:22 am
Forum: General
Topic: 12 or 18v battery on LHGG LTE6 kit
Replies: 1
Views: 623

Re: 12 or 18v battery on LHGG LTE6 kit

The Short Answer is YES.

The Device can be powered with 12-57 V and need ~8w of Power.
But you need Battery-Protection : To protect againt over drainage / over-discharge.
And you need LHGG-Protection : To protect againt improper shutdown
by ConnyMercier
Thu Dec 16, 2021 10:14 am
Forum: General
Topic: DNS issue - Unable to ping internal names
Replies: 1
Views: 1165

Re: DNS issue - Unable to ping internal names

* I can ping IPs but not names on my existing (parent) segment (10.0.0.0/24 - see below for setup) by IP (Linux says: temporary failure in name resolution). Same results from the RB terminal. You need to enter the DNS-Server of the Parent Network in your Routers DNS-Configuration. In your momentary...
by ConnyMercier
Thu Dec 16, 2021 9:27 am
Forum: Beginner Basics
Topic: Winbox locked
Replies: 2
Views: 679

Re: Winbox locked

Short of hacking your own Router, there isn`t really a Solution.
by ConnyMercier
Wed Dec 15, 2021 1:37 pm
Forum: General
Topic: SSH or HTTPS access in case of timing issues
Replies: 4
Views: 772

Re: SSH or HTTPS access in case of timing issues

Anyway, I think keeping an HTTP access (on an unusual port), can be a safe measure, if HTTPS ever fails. Take my advice or leave it: I personnaly would try and use some sort of Whitelist (IP or DynDNS), or even something like PortKnocking to limit the "Surface area" that your Router has o...
by ConnyMercier
Tue Dec 14, 2021 11:35 pm
Forum: Wireless Networking
Topic: help with loosing packets
Replies: 7
Views: 2309

Re: help with loosing packets

Good Evening, I took a look at your config... The Configuration of both Cap and Capsman isn't very "clean" If the Problem persist, i would advise to go thru your config and cleaning it up. My main concern are: 1. DHCP-Servers Both Cap and Capsman have active DHCP-Servers and I assume the M...
by ConnyMercier
Tue Dec 14, 2021 11:51 am
Forum: Beginner Basics
Topic: Help with general configuration and scripts
Replies: 2
Views: 777

Re: Help with general configuration and scripts

If you don`t have access to the Device,
Reset the RB433 via the Reset-Button

It isn`t hard to do, look in the Manual for instruction for more Info
(https://i.mt.lv/cdn/product_files/rb433GL-qg_181013.pdf)
by ConnyMercier
Tue Dec 14, 2021 11:16 am
Forum: RouterBOARD hardware
Topic: 3d print case for RBM11G
Replies: 1
Views: 2545

Re: 3d print case for RBM11G

I don`t mind creating one for the Mikrotik Comunity.
What kind of Case did you have in mind?
10.5 " Rackmount, 19" Rackmount , Big, Compact, in the form of a CAT =) ?!?
by ConnyMercier
Tue Dec 14, 2021 11:00 am
Forum: Wireless Networking
Topic: help with loosing packets
Replies: 7
Views: 2309

Re: help with loosing packets

Please Export and Post your Config for both Capsman and CAP
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Tue Dec 14, 2021 10:54 am
Forum: Beginner Basics
Topic: Best settings for PS4 - DMZ?, Fasttrack, Queue?
Replies: 3
Views: 1038

Re: Best settings for PS4 - DMZ?, Fasttrack, Queue?

If you need more help with your Setup
Please Export your actual Config:
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Tue Dec 14, 2021 10:52 am
Forum: Beginner Basics
Topic: Best settings for PS4 - DMZ?, Fasttrack, Queue?
Replies: 3
Views: 1038

Re: Best settings for PS4 - DMZ?, Fasttrack, Queue?

1. Queues If you are unable to Control the devices on your Network, then Queues are usually the only ways to manage Bandwidth / QoS. This allows you to, for exemple 1. prioritise the PS4-Traffic (like you normally would for exemple VOIP) 2. reserve Bandwidth for PS4-Traffic 3. Limit Non-PS4 Traffic,...
by ConnyMercier
Tue Dec 14, 2021 9:44 am
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S-RM + Audience POE Warning
Replies: 15
Views: 5454

Re: CRS328-24G-4S-RM + Audience POE Warning

Good Morning, 1. PoE-Overload I did some Test yesterday... I wasn`t able to reproduce the PoE-Overload on any of my Mikrotik PoE-Output devices. The Mikrotik website states a Max power consumption of 21Watts (30W for LTE version) During my quick tests , i wasn*t able to exceed 14.5 Watts. I would tr...
by ConnyMercier
Tue Dec 14, 2021 9:11 am
Forum: General
Topic: Firewall Newb needs help
Replies: 2
Views: 606

Re: Firewall Newb needs help

The Firewall-Rules don`t necessarily conflict with each other, but ... 1. Info When the Mikrotik communicates with other Devices on a Network If usually gets a Answer! But if you don`t allow this, communication becomes impossible. For Exemple : Requesting an IP from a DHCP-Server, Making a DNS-Reque...
by ConnyMercier
Mon Dec 13, 2021 12:15 pm
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S-RM + Audience POE Warning
Replies: 15
Views: 5454

Re: CRS328-24G-4S-RM + Audience POE Warning

Did you already try with a different / shorter Cable?
by ConnyMercier
Mon Dec 13, 2021 11:57 am
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S-RM + Audience POE Warning
Replies: 15
Views: 5454

Re: CRS328-24G-4S-RM + Audience POE Warning

ah you mean CRS328-24P-4S+RM ?

I dind`t find the CRS328-24G-4S-RM...
I thought is was an older Model
with 24G (24 gigabit non PoE )
by ConnyMercier
Mon Dec 13, 2021 10:50 am
Forum: General
Topic: Feature Request Switches
Replies: 6
Views: 1065

Re: Feature Request Switches

Like CRS326-24G-2S+RM but with 4 instead of 2 SFP+ slots. This would be a solution if CRS326-24S+2Q+RM is too big. How about the : CRS328-24P-4S+RM Are there any plans for products with following features? Like CRS326-24G-2S+RM but with 8 GE ports instead of 24. This would be a solution if CRS326-2...
by ConnyMercier
Mon Dec 13, 2021 8:23 am
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S-RM + Audience POE Warning
Replies: 15
Views: 5454

Re: CRS328-24G-4S-RM + Audience POE Warning

I got almost 20% more thruput after updating to 7.1+ Wave2 =) How do you Power your Audiance ? You need a 802.3at Type 2 PoE (PoE+) I power my Audiance via a CRS328-24P-4S I did some Quick Power test (CAT-6a Cable ~20m 51V) Laptop and phone during Low-Traffic ~ 6W of Power is needed, Laptop and phon...
by ConnyMercier
Sat Dec 11, 2021 7:39 am
Forum: General
Topic: Strange WiFi Setup
Replies: 10
Views: 1305

Re: Strange WiFi Setup

Good Morning, Did you configure the wlan1-Interface ? I edited my Step-by-Step Guide to include this now ... (edited Step 8 and 9 for the Audiance) If it is not working, maybe there is still a small mistake somewhere.. Simply post the config of the Mikrotik device and we will Check-It (/export hide-...
by ConnyMercier
Fri Dec 10, 2021 10:27 pm
Forum: Beginner Basics
Topic: port outside bridge
Replies: 9
Views: 1141

Re: port outside bridge

Ok... This is how i solved it in the LAB(Step-by-Step) Step 1: Create Bridge /interface bridge add comment="Office A" name=bridge1 add comment="Office B" name=bridge2 add comment="Printer" name=bridge3 Step 2: Assign IP-Addresses /ip address add address=192.168.1.200/24...
by ConnyMercier
Fri Dec 10, 2021 9:08 pm
Forum: Beginner Basics
Topic: Help with home setup RB4011iGS+RM vlans
Replies: 23
Views: 3846

Re: Help with home setup RB4011iGS+RM vlans

Sorry Anav...
I somehow skipped your #4 post while scrolling...


Didn`t want to make things more complicated ! =)
by ConnyMercier
Fri Dec 10, 2021 8:55 pm
Forum: Beginner Basics
Topic: Help with home setup RB4011iGS+RM vlans
Replies: 23
Views: 3846

Re: Help with home setup RB4011iGS+RM vlans

Step-by-Step Guide Step 0: Secure your Router -> Password for "admin" -> Firewall -> limit sevices -> ect... Step 1: Create Bridge /interface bridge add name=bridge1 vlan-filtering=yes Step 2: Create VLAN-Interfaces /interface vlan add comment="Shared Resources" interface=bridge1...
by ConnyMercier
Fri Dec 10, 2021 8:21 pm
Forum: General
Topic: Strange WiFi Setup
Replies: 10
Views: 1305

Re: Strange WiFi Setup

Step-by-Step RB4011 This is a Guide how I would configure the Device If i had to Set it up from scratch. Step 0: Securing your Router -> Give your user "admin" a password -> Firewall -> limit Services -> etc.... Step 1: Create Bridge /interface bridge add name=bridge1 Step 2: Assign Interf...
by ConnyMercier
Fri Dec 10, 2021 8:19 pm
Forum: General
Topic: Strange WiFi Setup
Replies: 10
Views: 1305

Re: Strange WiFi Setup

Step-by-Step Audiance This is a Guide how I would configure the Device If i had to Set it up from scratch. Step 0: Securing your Router -> Give your user "admin" a password -> Firewall -> limit Services -> etc.... Step 1: Create Bridge /interface bridge add name=bridge1 Step 2: Assign IP-A...
by ConnyMercier
Fri Dec 10, 2021 8:03 pm
Forum: General
Topic: Upload to FTP server
Replies: 2
Views: 777

Re: Upload to FTP server

So i installed ubuntu on a RPI4 Installed and configured vsftpd Created a file with some random Text named testfile.txt Mikrotik RouterOS 6.49.1 /tool fetch address="ubuntu" src-path="/testfile.txt" user=ubuntu mode=ftp password="123456789" dst-path="/home/ubuntu/D...
by ConnyMercier
Fri Dec 10, 2021 7:35 pm
Forum: Forwarding Protocols
Topic: Planning upgrade to v7.1 [SOLVED]
Replies: 3
Views: 1916

Re: Planning upgrade to v7.1 [SOLVED]

Short Answer: YES!

But in both RouterOS ver.6 and ver.7,
some Options/ Feature are only available over CLI.
by ConnyMercier
Fri Dec 10, 2021 6:44 pm
Forum: Beginner Basics
Topic: Real beginner problem with ping
Replies: 1
Views: 501

Re: Real beginner problem with ping

What are you trying to PING, the ROUTER ?
or something in the Internet ?


Did you think of NAT ?
If not try this :

/ip firewall nat
add action=masquerade chain=srcnat


If you need more Help, please POST your Config
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Fri Dec 10, 2021 6:40 pm
Forum: Beginner Basics
Topic: No internet access from LAN (RB2011-UiAS-2Hnd) [SOLVED]
Replies: 5
Views: 945

Re: No internet access from LAN (RB2011-UiAS-2Hnd) [SOLVED]

Could you please POST your Config,
so we can better understand how your device is configured ?
(/export hide-sensitive file=anynameyouwish)


Thanks !
by ConnyMercier
Fri Dec 10, 2021 6:37 pm
Forum: General
Topic: Does the new MLAG in v7 require identical models?
Replies: 1
Views: 444

Re: Does the new MLAG in v7 require identical models?

Are you running SwitchOS or RouterOS on your Devices? I know RouterOS ver.7+ Supports MLAG. SWOsS i don't know ! To answer your original Question: No , you don't have to use identical Models. Even in the Wiki, they don't use identical models for their Exemple =) (https://help.mikrotik.com/docs/displ...
by ConnyMercier
Fri Dec 10, 2021 6:23 pm
Forum: Beginner Basics
Topic: port outside bridge
Replies: 9
Views: 1141

Re: port outside bridge

Having multiple Network on a Router with the same IP-Range, is always going to be a PAIN in the A**! Is it really necessary? If yes, may i also know why ? (just curious) I think it's possible to "mark" via Mangle so the Router/Swtich knows from which "Bridge" a Request came from....
by ConnyMercier
Fri Dec 10, 2021 6:15 pm
Forum: General
Topic: SSH or HTTPS access in case of timing issues
Replies: 4
Views: 772

Re: SSH or HTTPS access in case of timing issues

Question 2: SSH as being immune to timing issues ? I never had a Problem with Mikrotik and timing. Even when the Device think it`s still 1970 =) Question 3: Suggest using some other tools (Wireguard, OVPN, ...)? In the context of a Productive and/or Business Environment , i think it is "Best Pr...
by ConnyMercier
Fri Dec 10, 2021 5:53 pm
Forum: Wireless Networking
Topic: wireless not getting out
Replies: 2
Views: 1716

Re: wireless not getting out

Did you Post the Full Export ?
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Fri Dec 10, 2021 5:47 pm
Forum: Forwarding Protocols
Topic: Planning upgrade to v7.1 [SOLVED]
Replies: 3
Views: 1916

Re: Planning upgrade to v7.1 [SOLVED]

If you can Update via Winbox...
Yes

Or do you mean something else ?
by ConnyMercier
Fri Dec 10, 2021 2:23 pm
Forum: General
Topic: hAP ac LAN speed
Replies: 11
Views: 858

Re: hAP ac LAN speed

RB5009 (ca. 2557.1 mbps Routing capacity) is a great device... Sadly it doesn`t have any Wireless-Interfaces (yet) .... So it isn`t a direct replacement for your hAPac... If you want a "all-in-one" device maybe the RB4011iGS+5HacQ2HnD-IN (2,560.8 mbps) or even the Audiance (912.6mbps)could...
by ConnyMercier
Fri Dec 10, 2021 1:26 pm
Forum: General
Topic: hAP ac LAN speed
Replies: 11
Views: 858

Re: hAP ac LAN speed

So i took a look at your Config, and maybe it is possible to tickel a bit more Performance out of the Device.. But it won`t be much....(a couple a mbits ) Like i posted earlier , The device itself can only handel around 300 mbits without Fast Path And your device also handels other services like Cap...
by ConnyMercier
Fri Dec 10, 2021 1:00 pm
Forum: General
Topic: hAP ac LAN speed
Replies: 11
Views: 858

Re: hAP ac LAN speed

If you expect / want more than 318 mbits
You will need to buy a more powerfull device !


Could you Export the full Configuration ?
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Fri Dec 10, 2021 12:56 pm
Forum: General
Topic: Strange WiFi Setup
Replies: 10
Views: 1305

Re: Strange WiFi Setup

My suggestions : Setup Audiance : I would configure the Audience as your Main Router. Use one of the wlan-Interfaces to connect to the ISP-Router as "station". Configure the needed Services on it like DHCP-Server, DNS, Firewall, NAT, etc... Bridge all remaining Interfaces together for your...
by ConnyMercier
Fri Dec 10, 2021 12:23 pm
Forum: Wireless Networking
Topic: Low wireless speed without fasttrack v7.1
Replies: 5
Views: 2136

Re: Low wireless speed without fasttrack v7.1

It isn`t a Perfect Solution,
But at least Mikrotik allowes you to upgrade back to the 6.48.6 (Long-term) or 6.49.2 (Stable).

Maybe there will be a Solution in the Future !
by ConnyMercier
Fri Dec 10, 2021 12:13 pm
Forum: Scripting
Topic: Script to create multiple Vlans with DHCP
Replies: 2
Views: 2025

Re: Script to create multiple Vlans with DHCP

How does the Script assign IP-Address and Co...?
Is there a Logic* behind it or a File ?

Logic = if vlan100 then IP= 10.1.100.1
by ConnyMercier
Fri Dec 10, 2021 11:42 am
Forum: General
Topic: How to configure Mikrotik via Virtual Machine?
Replies: 2
Views: 450

Re: How to configure Mikrotik via Virtual Machine?

Many Hypervisors can be used,
- ESX
- Hyper-V
- Qemu
- Xen
- VirtualBox
- ect...

Look at the Wiki for Instruction :

https://help.mikrotik.com/docs/pages/vi ... d=18350234
by ConnyMercier
Thu Dec 09, 2021 10:33 pm
Forum: Wireless Networking
Topic: CAPsMAN with open wireless network (hotspot)
Replies: 10
Views: 2385

Re: CAPsMAN with open wireless network (hotspot)

Good Evening Kris,

I wasn't able to reproduce the Error...
I was able to connect to the "unsecure" Network and get an IP-Address


Could you maybe Export the Configuration again ?
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Thu Dec 09, 2021 1:14 pm
Forum: General
Topic: Bridge VLAN Filtering / Can't access the MikroTik [SOLVED]
Replies: 4
Views: 853

Re: Bridge VLAN Filtering / Can't access the MikroTik [SOLVED]

That`s a good question ... Posible Reason 1: The Bridge-Interface has a default PVID-Parameter. A dynamic VLAN-Filtering Rule is created, if no Static rule is defined for this vlan-ID. Posible Reason 2: You only need to add the bridge, if the Device itself need to communicate with the VLAN. So for a...
by ConnyMercier
Thu Dec 09, 2021 12:21 pm
Forum: General
Topic: Bridge VLAN Filtering / Can't access the MikroTik [SOLVED]
Replies: 4
Views: 853

Re: Bridge VLAN Filtering / Can't access the MikroTik [SOLVED]

You also need to add the "Bridge" to the Tagged VLAN-Filtering rules

Basic-Exemple:

/interface bridge vlan
add bridge=bridge-LAN tagged=ether8,bridge-LAN untagged=ether10 vlan-ids=105
add bridge=bridge-LAN tagged=ether8,bridge-LAN untagged=ether9 vlan-ids=117
by ConnyMercier
Thu Dec 09, 2021 12:06 pm
Forum: Beginner Basics
Topic: CCR1036-12G as WAN switch and remote access port
Replies: 6
Views: 779

Re: CCR1036-12G as WAN switch and remote access port

I am personally tooo Chicken to have a Public-Router without an active Firewall (Input-Chain)
But i see a lot of Mikrotik-Devices configured like yours... and they don`t report any Problems !



But maybe other Forum-Users can give they opinion !!
by ConnyMercier
Thu Dec 09, 2021 10:45 am
Forum: Beginner Basics
Topic: CCR1036-12G as WAN switch and remote access port
Replies: 6
Views: 779

Re: CCR1036-12G as WAN switch and remote access port

Did you Post the Full-Export ?
If yes, your Device is not Secure.

You may want to add Firewall, limit "/ip services" etc...
by ConnyMercier
Thu Dec 09, 2021 10:00 am
Forum: Wireless Networking
Topic: Wireless cant connect to LAN on ROS7.1
Replies: 8
Views: 2329

Re: Wireless cant connect to LAN on ROS7.1

Maybe one of the following Paramters is the Problem on the Wireless-Interface...
Can you maybe temperary deactivate them and Test ?

wmm-support=enabled
multicast-helper=dhcp
by ConnyMercier
Thu Dec 09, 2021 9:48 am
Forum: Wireless Networking
Topic: CAPsMAN with open wireless network (hotspot)
Replies: 10
Views: 2385

Re: CAPsMAN with open wireless network (hotspot)

Godd Morning again, This is wrong : add country=hungary datapath.bridge=bridge datapath.vlan-id=10 datapath.vlan-mode=use-tag name=hotspot security.authentication-types="" The export should be : add country=hungary datapath.bridge=bridge datapath.vlan-id=10 datapath.vlan-mode=use-tag name=...
by ConnyMercier
Thu Dec 09, 2021 9:29 am
Forum: RouterBOARD hardware
Topic: mikrotik 125-24g-1s-rm no longer booting. bad capacitor? [SOLVED]
Replies: 4
Views: 2929

Re: mikrotik 125-24g-1s-rm no longer booting. bad capacitor? [SOLVED]

Do you Heard a humming or clicking sound from the Capacitor ?


overheated, bad cap or simply Old.... in any case,
If you are able, I would recommand replacing the cap

And see what happends !
by ConnyMercier
Thu Dec 09, 2021 9:18 am
Forum: Wireless Networking
Topic: Wireless cant connect to LAN on ROS7.1
Replies: 8
Views: 2329

Re: Wireless cant connect to LAN on ROS7.1

Is it posible to post the config of the Mikrotik device ?
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Thu Dec 09, 2021 1:19 am
Forum: Wireless Networking
Topic: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]
Replies: 12
Views: 2459

Re: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]

I'm glad it finally worked !


You will need some Foward Firewall-Rules to restric trafic between VLAN's
Be carefull not to Lock yourself out ! (maybe use Safe-Mode)
by ConnyMercier
Thu Dec 09, 2021 12:53 am
Forum: Wireless Networking
Topic: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]
Replies: 12
Views: 2459

Re: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]

The Question is what is Working ?

Do the Devices in the Network get an IP-Address on any of the VLAN ?
by ConnyMercier
Thu Dec 09, 2021 12:26 am
Forum: Wireless Networking
Topic: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]
Replies: 12
Views: 2459

Re: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]

You need to include the "bridge" in the Tagged-List...
If you don't , the "Device" can't communicate with the VLAN

Exemple:
add vlan-ids=10 tagged=bridge,ether2_ap_iroda_lelkeszi,ether3_ap_iroda_titkarsag,ether14_ap_out,ether18_sw_church bridge=bridge
by ConnyMercier
Wed Dec 08, 2021 10:07 pm
Forum: Wireless Networking
Topic: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]
Replies: 12
Views: 2459

Re: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]

Tipp / Trick : If you decide to segregate your Network with VLAN's, I recommend you also have a Network / VLAN dedicated for a Administration-Network. It's usually considered "Best-Practice" and add another Layer of security* to your Network. You can then use this "Administration-Netw...
by ConnyMercier
Wed Dec 08, 2021 4:44 pm
Forum: Wireless Networking
Topic: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]
Replies: 12
Views: 2459

Re: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]

FYI -> ether4_ap_pince isn´t assigned to the Bridge
by ConnyMercier
Wed Dec 08, 2021 4:26 pm
Forum: Wireless Networking
Topic: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]
Replies: 12
Views: 2459

Re: CAPsMAN with VLANs no traffic + DHCP issue [SOLVED]

You are missing the Bridge-VLAN and the Bridge-Port PVID Step 0: Untagged-Traffic In your current Configuration, Untagged-Traffic will be assigned a default VLAN-ID of 1 This can be changed in the Bridge-Configuration or your can assign a Tag for each Port individually via "/interface bridge po...
by ConnyMercier
Wed Dec 08, 2021 2:14 pm
Forum: General
Topic: 100% CPU on RB951G-2HnD while copy files between DMZ and LAN
Replies: 1
Views: 379

Re: 100% CPU on RB951G-2HnD while copy files between DMZ and LAN

The RB951G isn´t the most Powerful Router of the World... You can expect around 244 Mbps of Routing capacity (without FastPath) Solutions.... - Firewall / NAT Optimisation - Fast Path utilisation - QoS / bandwidth-Limitation If you need more help, please post the config of the Mikrotik device (/expo...
by ConnyMercier
Wed Dec 08, 2021 1:55 pm
Forum: General
Topic: find switch port with fluke
Replies: 8
Views: 1192

Re: find switch port with fluke

@andkar, Thanks for the Feedback!

I did a Quick Test with a Fluke at work and a hap ac2
I wasn`t able to get Port-ID on both RouterOS 6.49.2 and 7.1
by ConnyMercier
Tue Dec 07, 2021 8:44 pm
Forum: General
Topic: disable access list via terminal
Replies: 4
Views: 524

Re: disable access list via terminal

To disable the Access-List Funktion via the Wireless-Interface you need to both enable default Authentication and Fowarding (Access-List is used for both Parameters / Features) Basic-Exemple for wlan2: /interface wireless set wlan2 default-authentication=yes /interface wireless set wlan2 default-for...
by ConnyMercier
Tue Dec 07, 2021 6:14 pm
Forum: General
Topic: disable access list via terminal
Replies: 4
Views: 524

Re: disable access list via terminal

Basic Exemple: (Disable All)
 /interface wireless access-list disable [find]
Tried it via SSH, Telnet and Console(winbox)
RouterOS ver. 6.49.1
by ConnyMercier
Tue Dec 07, 2021 1:39 pm
Forum: General
Topic: NordVPN problem on local network [SOLVED]
Replies: 3
Views: 555

Re: NordVPN problem on local network [SOLVED]

Glad i could Help !

The new Mangle-Rule basicly says :

Every Client-IP listed under "under_nordvpn" schould go thru the VPN,
EXCEPT if the Destination-IP is listed under "LAN_List"
by ConnyMercier
Tue Dec 07, 2021 1:29 pm
Forum: General
Topic: NordVPN problem on local network [SOLVED]
Replies: 3
Views: 555

Re: NordVPN problem on local network [SOLVED]

You need an exception to your Mangle-Rule. Many ways to solve this Problem.. You can add an address-list with the IP`s and/or IP-Ranges you would like to exclude from NORDVPN For exemple "LAN_List" and include add 10.10.0.0/24 /ip firewall mangle add action=mark-connection chain=prerouting...
by ConnyMercier
Mon Dec 06, 2021 2:44 pm
Forum: Beginner Basics
Topic: Static DNS entry unlimited TTL?
Replies: 6
Views: 1159

Re: Static DNS entry unlimited TTL?

, BTW, doesn't work on my linux workstation.
Look at that.... lerned something new !!
Thanks =)
by ConnyMercier
Mon Dec 06, 2021 2:26 pm
Forum: Beginner Basics
Topic: Static DNS entry unlimited TTL?
Replies: 6
Views: 1159

Re: Static DNS entry unlimited TTL?

... if clients are to cache answer indefinitely, how does one force clients to get fresh value in case record changes?
Answer: ipconfig /flushdns

:lol:
by ConnyMercier
Mon Dec 06, 2021 12:49 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 826
Views: 142626

Re: v7.1 is released!

Did they remove this release from the download now?
Jap , it´s not available anymore
by ConnyMercier
Mon Dec 06, 2021 7:54 am
Forum: General
Topic: find switch port with fluke
Replies: 8
Views: 1192

Re: find switch port with fluke

The Mikrotik Wiki is a bit hazy...
(https://help.mikrotik.com/docs/display/ ... +discovery)

I have a Fluke lying around at Work...
I will try and make some Test.


But maybe some other Forum-User has more experience with Mikrotik and CDP/LLDP
by ConnyMercier
Sun Dec 05, 2021 11:11 pm
Forum: Beginner Basics
Topic: Static DNS entry unlimited TTL?
Replies: 6
Views: 1159

Re: Static DNS entry unlimited TTL?

If i am not mistaken, When you add a Static-DNS entry It will stay in the Static-DNS-List forever or untill deleted. Exemple : /ip dns static add name=test address=1.1.1.1 The TTL-Value (default 24h) are for the Client asking for the Domain. If you want your Clients to cache DNS-Entries for longer, ...
by ConnyMercier
Sun Dec 05, 2021 10:56 pm
Forum: General
Topic: Block untrusted MACs
Replies: 1
Views: 736

Re: Block untrusted MACs

by ConnyMercier
Sun Dec 05, 2021 10:44 pm
Forum: General
Topic: Mikrotik switch functionality for model choosing (+) .
Replies: 1
Views: 557

Re: Mikrotik switch functionality for model choosing (+) .

I use the CRS328-24P-4S+RM for everything =) Answers to your Question 1. desirably unit 19 inch case; Yes , its 19" Rackmount 2. desirably LCD; No, most if not all new Mikrotik Switches don't have LCD's anymore. 3. fully hardware processing switching; I don't know what "fully" hardwar...
by ConnyMercier
Sun Dec 05, 2021 10:10 pm
Forum: Beginner Basics
Topic: CCR2004-1G-12S+2XS slow inter VLAN routing [Fixed]
Replies: 9
Views: 2710

Re: CCR2004-1G-12S+2XS slow inter VLAN routing

Answer 1 Is this because the CCR2004-1G-12S+2XS does not have a switch chip? Short Answer.. NO! Most, if not all Cloud Core Router (CCR) from Mikrotik don't have a Switch-Chip They are usually optimize for Routing over CPU Answer 2 Is there something wrong? I never owned a CCR2004-1G-12S+2XS, but I ...
by ConnyMercier
Sun Dec 05, 2021 9:36 pm
Forum: RouterOS beta and rc versions
Topic: Webfig unavailable after update
Replies: 6
Views: 2294

Re: Webfig unavailable after update

I Factory-Reset and updated my RB4011 from 6.49.1 to 7.1
I wasn't able to reproduce the Error.

Did you try disabling the Web-Service and restarting the Router (/ip service set www disabled=yes)
After the Reboot, try to re-enable the Web-Services and connecting to it.
by ConnyMercier
Sun Dec 05, 2021 9:27 pm
Forum: Beginner Basics
Topic: queue not working and in red text color
Replies: 1
Views: 615

Re: queue not working and in red text color

We need more Information to help you.

1. Can you please Post a Screenshot of Queues in RED-Color

2. Can you please post the config of the Mikrotik device
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Sun Dec 05, 2021 9:25 pm
Forum: RouterOS beta and rc versions
Topic: Broken x86 after upgrade to v7.1
Replies: 2
Views: 1206

Re: Broken x86 after upgrade to v7.1

You are not alone, a couple of guy's had problem updating to ROSv7.1 on x86
Usually Mikrotik doesn't help restoring lost Licences...

try contacting support directly
-->> support@mikrotik.com
by ConnyMercier
Sun Dec 05, 2021 5:57 pm
Forum: RouterBOARD hardware
Topic: Convert passive PoE to 802.3af
Replies: 2
Views: 2722

Re: Convert passive PoE to 802.3af

It isn't possible, the Mikrotik hAP ac³ only supports up to 28v.
You will need a PoE-Injector or PoE-Switch


Some other devices like the hEX s supports up to 57v,
and because of this, it is possible to Power 802 devices thru the PoE-Out.
by ConnyMercier
Sun Dec 05, 2021 2:07 pm
Forum: General
Topic: VRRP and ISP failover?
Replies: 10
Views: 1962

Re: VRRP and ISP failover?

I recommend to configure Router A ( RB3011) and Router B (RB450) before even starting with the VRRP-Setting. Step 1: Configure Basic LAN-Network (IP-Address) Router A: ether10 --> 172.16.15.251/20 Router B: ether5 --> 172.16.15.252/20 Step 2: Configure Main-ISP Configure Router A and Cable-ISP Confi...
by ConnyMercier
Sun Dec 05, 2021 1:14 pm
Forum: General
Topic: Admin password legislation
Replies: 4
Views: 572

Re: Admin password legislation

To add to @holvoetn ... I also think it is a good idea! Especially for consumer oriented Network-Devices... Don't forget in some EU-Contries like Germany, You are responsible for your Network and what appends on it So if someone uses your Network for exemple to download illigal Music / Movies YOU as...
by ConnyMercier
Sun Dec 05, 2021 12:02 am
Forum: Beginner Basics
Topic: How to create most basic VLAN [SOLVED]
Replies: 13
Views: 1586

Re: How to create most basic VLAN [SOLVED]

I understand, you need at least 2 vlan to test/learn bridge filtering Here is a very basic exemple on the hEXs with 2 vlans Network A vlan111 10.10.111.0/24 Network B vlan222 10.10.222.0/24 Step 1: Create bridge /interface bridge add name=bridge1 Step 2: Create VLAN'S /interface vlan add interface=b...
by ConnyMercier
Sat Dec 04, 2021 11:23 pm
Forum: Scripting
Topic: Script for Router Login DNS record [SOLVED]
Replies: 3
Views: 2472

Re: Script for Router Login DNS record [SOLVED]

I am not a 100% sure i understand your needs... This will always keep your DNS-Record up to date with the actual Internet IPv4 address. /ip cloud set ddns-enabled=yes ddns-update-interval=20m If you want your DNS-Record to contain the local IP-Adresse use the following : /ip cloud set ddns-enabled=y...
by ConnyMercier
Sat Dec 04, 2021 11:07 pm
Forum: Beginner Basics
Topic: How to create most basic VLAN [SOLVED]
Replies: 13
Views: 1586

Re: How to create most basic VLAN [SOLVED]

@simsrw73: May I ask why you are so keen to use the "bridge vlan filtering" Feature ?

Because, For a small SOHO-Network this Feature isn't necessary, when
the Guest-Network is only provided over Wireless & Vlan.
The Step-by-Step guide i gave you works just fine...
by ConnyMercier
Sat Dec 04, 2021 9:26 pm
Forum: Beginner Basics
Topic: How to create most basic VLAN [SOLVED]
Replies: 13
Views: 1586

Re: How to create most basic VLAN [SOLVED]

Many ways to create and assign Clients to a "Guest" Network. In this exemple a used a "Virtual" Wireless-Interface with a dedicated SSID Wireless Access-Point (Mikrotik wAP ac) Step 1: Create Bridge /interface bridge add name=bridge1 Step 2: Create Security-Profile for Guest /int...
by ConnyMercier
Sat Dec 04, 2021 9:04 pm
Forum: Beginner Basics
Topic: How to create most basic VLAN [SOLVED]
Replies: 13
Views: 1586

Re: How to create most basic VLAN [SOLVED]

Here you go..... I basic Step-by-Step guide assuming Guest-Network is vlan-id 111 Main Router (Mikrotik HEX s) Step 1: Create Bridge /interface bridge add name=bridge1 Step 2: Create VLAN-Interfaces /interface vlan add interface=bridge1 name=vlan111 vlan-id=111 Step 3: Assign IP-Address /ip address ...
by ConnyMercier
Sat Dec 04, 2021 11:34 am
Forum: RouterOS beta and rc versions
Topic: hEX S: PoE voltage measurement is broken
Replies: 11
Views: 3737

Re: hEX S: PoE voltage measurement is broken

It's a BUG in ROS7
Both HEX and HEX s are affected

Mikrotik know's about it...
.> viewtopic.php?t=180465&hilit=hex#p892682
by ConnyMercier
Fri Dec 03, 2021 12:31 pm
Forum: General
Topic: Chateau 5 G Router and VOIP
Replies: 2
Views: 818

Re: Chateau 5 G Router and VOIP

Can you please post the config of the Mikrotik device
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Fri Dec 03, 2021 12:25 pm
Forum: General
Topic: Smart home devices are still getting disconnected [SOLVED]
Replies: 39
Views: 4034

Re: Smart home devices are still getting disconnected [SOLVED]

Can you please post the config of the Mikrotik device
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Fri Dec 03, 2021 12:22 pm
Forum: RouterBOARD hardware
Topic: PowerBox Pro Wall Mount?
Replies: 9
Views: 4270

Re: PowerBox Pro Wall Mount?

I don`t have the PowerBOX Pro in my LAB, so i can`t test it and/or make Foto`s..


Usually you can mount a piece of DIN-Rail ( not included with Device) on a Flat-Surface
Mount the DIN-Rail mounting HW (included with device) on the Device
After that the Device can be "Cliped" in
by ConnyMercier
Fri Dec 03, 2021 12:14 pm
Forum: Beginner Basics
Topic: SFP+ as WAN instead of Ether1
Replies: 5
Views: 794

Re: SFP+ as WAN instead of Ether1

But my main guestion is still unanswered: Do i need just change interface from ether1 to SFP+ port and all will be working? OR i will need to configure something else to swtich to optic... :) Yeah, you will most likely only have to change the ether1-Reference to SFP+ for firewall, NAT, DHCP-Sclient...
by ConnyMercier
Fri Dec 03, 2021 12:02 pm
Forum: RouterBOARD hardware
Topic: PowerBox Pro Wall Mount?
Replies: 9
Views: 4270

Re: PowerBox Pro Wall Mount?

You can screw a DIN-RAIL on a Wall , with no problem.

If you buy DIN-Rail in "Bulk" they are usually fitted with hole, so you can mount them on a Flat surface.
by ConnyMercier
Fri Dec 03, 2021 11:35 am
Forum: Beginner Basics
Topic: SFP+ as WAN instead of Ether1
Replies: 5
Views: 794

Re: SFP+ as WAN instead of Ether1

The CRS326-24G-2S+IN shouldnt have any problem Routing 50/50 ISP Speeds.

The Problem with Response-time / Latency may solves itself with the new ISP (Optic fiber),
But may also be because of the Config / Performance of the Network or Mikrotik-Device
by ConnyMercier
Fri Dec 03, 2021 11:23 am
Forum: RouterBOARD hardware
Topic: PowerBox Pro Wall Mount?
Replies: 9
Views: 4270

Re: PowerBox Pro Wall Mount?

You can simply use the DIN rail itself , to mount it on the Wall
by ConnyMercier
Tue Nov 30, 2021 11:15 pm
Forum: RouterBOARD hardware
Topic: Router antennas
Replies: 6
Views: 3310

Re: Router antennas

If you don't get an answer via the Forum in the next couple of days.


Ask your distributer or Mikrotik Support directly
by ConnyMercier
Tue Nov 30, 2021 11:14 pm
Forum: RouterBOARD hardware
Topic: Router antennas
Replies: 6
Views: 3310

Re: Router antennas

I don't have the Electronics knowledge to answer this question... I don't know if you need to change something before connectiong the LTE-Antenna I just know one of my German supplier wrote under the Chateau "Sie können 2 externe LTE-Antennen" translated-> You can connect 2 LTE-Antenna (ht...
by ConnyMercier
Tue Nov 30, 2021 6:13 pm
Forum: General
Topic: Using two routers
Replies: 11
Views: 1471

Re: Using two routers

What do you not understand about ----> I don't know the login for either of them!!!
He added / edited his Post this after i postet =)
by ConnyMercier
Tue Nov 30, 2021 6:02 pm
Forum: Beginner Basics
Topic: Travel VPN router - Wireless both WAN and LAN
Replies: 10
Views: 1469

Re: Travel VPN router - Wireless both WAN and LAN

Yes the cAPac gets very very HOT...
The enclosure is printed in PETG and it has enough holes not to melt =)

use it every day since the beginning of Corona...
No problem yet ...
by ConnyMercier
Tue Nov 30, 2021 6:00 pm
Forum: Beginner Basics
Topic: Travel VPN router - Wireless both WAN and LAN
Replies: 10
Views: 1469

Re: Travel VPN router - Wireless both WAN and LAN

I used the cAPac insteed of the hAPac because of the PoE Bypass. Why? 1. It gives me the posibility to connect and power an IP-Phone or other small PoE-Device 2. Sometime i connect the Router between existing devices (like switch and existing IP-Phone) because no other Cable is free or working (like...
by ConnyMercier
Tue Nov 30, 2021 5:48 pm
Forum: Beginner Basics
Topic: Travel VPN router - Wireless both WAN and LAN
Replies: 10
Views: 1469

Re: Travel VPN router - Wireless both WAN and LAN

I also make some 10.5" Rackmount enclosures for Mikrotik and other Devices. It's designed to be easy to print on a Std Sized 3D-Printer and you can even attach two together to mount in 19" Rack. I can't show actual Picture of Data-Center where i implemented them.. But I attached some Pictu...
by ConnyMercier
Tue Nov 30, 2021 5:41 pm
Forum: Beginner Basics
Topic: Travel VPN router - Wireless both WAN and LAN
Replies: 10
Views: 1469

Re: Travel VPN router - Wireless both WAN and LAN

Your wish is my command :lol:

If here there is a need for this kind of "Produkt"
i'll gladly refine the Design and make it available

https://ibb.co/hXHm9X1
https://ibb.co/28yMDGn
by ConnyMercier
Tue Nov 30, 2021 2:34 pm
Forum: General
Topic: find switch port with fluke
Replies: 8
Views: 1192

Re: find switch port with fluke

Do have LLDP/CDP active on your Mikrotik-Device ?
You can check under
/ip neighbor discovery-settings print 
by ConnyMercier
Tue Nov 30, 2021 6:21 am
Forum: General
Topic: Mikrotik suddenly stop working
Replies: 2
Views: 593

Re: Mikrotik suddenly stop working

I had something similar in the Past
I wasn't able to recover from it !
by ConnyMercier
Tue Nov 30, 2021 6:02 am
Forum: General
Topic: Picking preferred DNS server
Replies: 2
Views: 665

Re: Picking preferred DNS server

Good Morning, I did some quick Test and I can confirm your Problem.... I found two Solutions to your Problem... Solution 1: Netwach When Netwatch detect the Pihole-Server is back online, it will reset the Static- DNS-Server and Flush all DNS-Cache entries. The Static-Server will be #1 again!! In the...
by ConnyMercier
Tue Nov 30, 2021 4:55 am
Forum: General
Topic: Using two routers
Replies: 11
Views: 1471

Re: Using two routers

Can you please post the config of the Mikrotik device
(/export hide-sensitive file=anynameyouwish)
by ConnyMercier
Tue Nov 30, 2021 2:45 am
Forum: Beginner Basics
Topic: Travel VPN router - Wireless both WAN and LAN
Replies: 10
Views: 1469

Re: Travel VPN router - Wireless both WAN and LAN

mAPLite is a very good Travel-Router! I have 3 of them and one is always in my Laptop-Bag It's Compact and you can power it with your laptop or Power-Bank, everyone should have one =) I do a lot of Job-Hopping... And realised most company's have a PoE-Network So my Main Travel-Router at the moment i...
by ConnyMercier
Tue Nov 30, 2021 12:26 am
Forum: General
Topic: Execute remote script in Router OS from Windows Machine
Replies: 2
Views: 576

Re: Execute remote script in Router OS from Windows Machine

I use the Mikrotik-API + Powershell for some projekts.
It's not perfect, but i didn't have any problems yet!
by ConnyMercier
Tue Nov 30, 2021 12:22 am
Forum: RouterBOARD hardware
Topic: [Request} Restrict web admin to a VLAN in RouterOS [Fixed]
Replies: 4
Views: 4322

Re: [Request} Restrict web admin to a VLAN in RouterOS

Glad i could help !

Good Luck and don't forget to backup before changing anything =)
by ConnyMercier
Mon Nov 29, 2021 4:34 pm
Forum: Beginner Basics
Topic: assign ip and mac for each port
Replies: 5
Views: 822

Re: assign ip and mac for each port

Solution A: DOT1X provide port-based network access control via a Radius-Server (https://help.mikrotik.com/docs/display/ROS/Dot1X) Solution B: DHCP If you don't want to border with complex Radius-Server and Co.... You could set the DHCP-Server to only give IP-Addresse to known devices (Static-Leases...
by ConnyMercier
Mon Nov 29, 2021 4:07 pm
Forum: General
Topic: RDP connencton on a specific WAN
Replies: 3
Views: 598

Re: RDP connencton on a specific WAN

Incomming RDP ?
Where Client via the Internet connects to PC's and Server's
in your Local Network

or Outgoing RDP ?
Where the PC's in your Local Network connect to
Server's in the internet
by ConnyMercier
Mon Nov 29, 2021 3:37 am
Forum: General
Topic: password suddenly stopped working
Replies: 2
Views: 1027

Re: password suddenly stopped working

You did the right thing!! Try connecting directly to the Router , and see what happens... If you are where using the "Default-Config" you can try using Telnet (IP & MAC) ,Winbox (IP & MAC), SSH, WEB (HTTP) If the Router is unresponsive and we assume you didnt do anything =) There i...
by ConnyMercier
Sun Nov 28, 2021 11:13 pm
Forum: RouterBOARD hardware
Topic: Router antennas
Replies: 6
Views: 3310

Re: Router antennas

Short Answer: Yes
by ConnyMercier
Sun Nov 28, 2021 5:27 pm
Forum: RouterBOARD hardware
Topic: Router antennas
Replies: 6
Views: 3310

Re: Router antennas

The antenna's are used for both 5Ghz and LTE frequencies.
by ConnyMercier
Sun Nov 28, 2021 6:06 am
Forum: Beginner Basics
Topic: What does contry "etsy" mean? [SOLVED]
Replies: 5
Views: 1770

Re: What does contry "etsy" mean? [SOLVED]

ETSI: European Telecommunications Standards Institute
(https://en.wikipedia.org/wiki/ETSI)


Use the Standard USA (country="united states")
by ConnyMercier
Fri Nov 26, 2021 10:19 pm
Forum: RouterBOARD hardware
Topic: Post-fire hardware recommendations
Replies: 14
Views: 4965

Re: Post-fire hardware recommendations

NICE to have use of the full 300/300. FYI, I get that now in certain areas of the house. With the actual Public Stable, you won't be able to get 300/300 speeds over Wireless. A standard cAPac or wAPac will achive around 200mbits MAX Someone did some Test last week and posted the results on the Foru...
by ConnyMercier
Fri Nov 26, 2021 10:12 pm
Forum: RouterBOARD hardware
Topic: Post-fire hardware recommendations
Replies: 14
Views: 4965

Re: Post-fire hardware recommendations

It wouldn't be a problem hardwiring them all, but I assumed Mesh was the way to go.
I always recommend using Wired-Connection wherever possible.
Only use Mesh or Repeater-mode if hardwiring them is impossible.
by ConnyMercier
Fri Nov 26, 2021 10:06 pm
Forum: RouterBOARD hardware
Topic: Post-fire hardware recommendations
Replies: 14
Views: 4965

Re: Post-fire hardware recommendations

I had a similar Home-Setup..... I started with a CRS328-24P-4S+RM as a "All-in-One" Solution (Switch, Router, Firewall, Capsman-Manager, etc..) - wAPac and cAPac for Wireless-Connectivity powered and Managed via the CRS328 - SPF+/10Gbps for NAS - GPON SFP-Modules for ISP-Connectivity It wa...
by ConnyMercier
Fri Nov 26, 2021 9:30 pm
Forum: Scripting
Topic: block ping but see what is pinged?
Replies: 6
Views: 3102

Re: block ping but see what is pinged?

Good Evening,

Can you please Export and Post the Firewall
 /ip firewall export
by ConnyMercier
Fri Nov 26, 2021 5:51 pm
Forum: RouterBOARD hardware
Topic: hEX temperature feedback [SOLVED]
Replies: 5
Views: 4138

Re: hEX temperature feedback [SOLVED]

In the "ROS ver.7.1rc6" is software cosmetic bug, information is forwarded to person in charge.
@elans,
ROS ver.7.1rc7 still has the "cosmetic" bug
by ConnyMercier
Thu Nov 25, 2021 5:11 pm
Forum: Wireless Networking
Topic: cAP vs cAP XL
Replies: 28
Views: 7547

Re: cAP vs cAP XL

Hmmm good question.... Exept for the Antenna both devices are identical... If price isn't a problem, go for the XL My personal Tipp : Look at what's available I don't know where you live, but many of my suppliers don't have the XL in Stock or in great numbers. I only have one who has them in Stock a...
by ConnyMercier
Thu Nov 25, 2021 4:52 pm
Forum: General
Topic: How to explain my boss about complexity of RouterOS
Replies: 9
Views: 1513

Re: How to explain my boss about complexity of RouterOS

If you have a Team-Member working in IT, wo doesn't understand IT... Well If he isn't the Son of a Board-Member, the company has a Management Problem But returning to your original Question.... Problem 1: Time to teach I assume your daily Workload will not change until your are gone... So this makes...
by ConnyMercier
Thu Nov 25, 2021 12:38 pm
Forum: Scripting
Topic: Howto get the PTR record for a single IP?
Replies: 6
Views: 2801

Re: Howto get the PTR record for a single IP?

Try the :resolve command

Exemple :

[admin@MikroTik] > :put [:resolve 18.196.34.14]
ec2-18-196-34-14.eu-central-1.compute.amazonaws.com
by ConnyMercier
Thu Nov 25, 2021 3:23 am
Forum: General
Topic: Detecting Viber traffic characteristics?
Replies: 11
Views: 1936

Re: Detecting Viber traffic characteristics?

I did some Quick Test.... I didn't have any success with Layer7 in the short time... I will try again tomorow BUT I was able to identify "Viber" Servers via a Firewall-Rule and /ip firewall filter add action=add-dst-to-address-list address-list=ViberServers address-list-timeout=none-dynami...
by ConnyMercier
Thu Nov 25, 2021 12:48 am
Forum: General
Topic: Mikrotik equipment to the new home
Replies: 20
Views: 2699

Re: Mikrotik equipment to the new home

Take a look at the Mikrotik Audiance
(https://mikrotik.com/product/audience)

It has 3 Wireless-Interfaces.
2.4 & 5 Ghz for Network
and a dedicated 5Ghz for Mesh or Repeater-Mode
by ConnyMercier
Thu Nov 25, 2021 12:45 am
Forum: General
Topic: User Allowed Addresses
Replies: 2
Views: 789

Re: User Allowed Addresses

Et Voila !
/ip service set winbox address=""
by ConnyMercier
Thu Nov 25, 2021 12:43 am
Forum: Scripting
Topic: block ping but see what is pinged?
Replies: 6
Views: 3102

Re: block ping but see what is pinged?

Here you go...
/ip firewall filter
add action=add-dst-to-address-list address-list=PingedIP address-list-timeout=none-dynamic chain=forward comment="Identify ICMP / PING Servers " dst-address-list=BlockLAN protocol=icmp
by ConnyMercier
Wed Nov 24, 2021 7:46 pm
Forum: SwOS
Topic: Disabling ARP Entry
Replies: 3
Views: 3200

Re: Disabling ARP Entry

Sorry..
by ConnyMercier
Wed Nov 24, 2021 5:03 pm
Forum: Scripting
Topic: block ping but see what is pinged?
Replies: 6
Views: 3102

Re: block ping but see what is pinged?

Basic-Exemple /ip firewall filter add action=add-dst-to-address-list address-list=PingedIP address-list-timeout=none-dynamic chain=forward comment="Identify ICMP / PING Servers " out-interface-list=WAN protocol=icmp add action=drop chain=forward comment="Drop: ICMP / PING (LAN -> WAN)...
by ConnyMercier
Wed Nov 24, 2021 4:12 pm
Forum: General
Topic: Why tool traceroute limited to 14 hops?
Replies: 10
Views: 1272

Re: Why tool traceroute limited to 14 hops?

It is not limited to 14
24-11-_2021_15-11-00.jpg
by ConnyMercier
Wed Nov 24, 2021 4:07 pm
Forum: RouterBOARD hardware
Topic: Post-fire hardware recommendations
Replies: 14
Views: 4965

Re: Post-fire hardware recommendations

What kind of Wireless-Performance do you want? - How many Devices will be connecting to the Network ? - What kind of Performance do you want from your Wireless-Network? (Do you expect max Throughput and surf the Internet with full Bandwidth of your ISP's) - Are you able to provide Wired Connectivity...
by ConnyMercier
Wed Nov 24, 2021 12:16 am
Forum: RouterOS beta and rc versions
Topic: Health readings with v7 [SOLVED]
Replies: 39
Views: 8854

Re: Health readings with v7 [SOLVED]

@Jotne,
do you still need help with testing ?
by ConnyMercier
Tue Nov 23, 2021 5:57 am
Forum: Scripting
Topic: how to reboot for more than 1 minute
Replies: 7
Views: 2923

Re: how to reboot for more than 1 minute

Ahhh ...It was my mistake

When receiving a SMS the modem sometimes get "Stuck"
Because of this, you want to constantly check if the modem is "Stuck"
and if so, reset the Modem / USB-Device.
by ConnyMercier
Tue Nov 23, 2021 5:29 am
Forum: General
Topic: Many Pending Connections / Gmail / Youtube Music / Google Meets
Replies: 3
Views: 936

Re: Many Pending Connections / Gmail / Youtube Music / Google Meets

Maybe a DNS issue ....
Did you try using 1.1.1.1 or 8.8.8.8 for your Clients?
(Basically skiping Mikrotik as a DNS-Server completely)
by ConnyMercier
Tue Nov 23, 2021 5:22 am
Forum: Scripting
Topic: how to reboot for more than 1 minute
Replies: 7
Views: 2923

Re: how to reboot for more than 1 minute

Maybe i didn't understand your Request....

I taught you needed a way to Check 60 Sec after boot,
If your device received a SMS and if not Reset USB

What did i understand wrong ?
by ConnyMercier
Tue Nov 23, 2021 5:09 am
Forum: Wireless Networking
Topic: Field Wireless Network
Replies: 6
Views: 2106

Re: Field Wireless Network

Mikrotik has a very steep learning curve.... I recommend looking for a local Distributor of Mikrotik-Products (https://mikrotik.com/buy) Most of them have experienced IT-Staff that can quickly and easely Configure the Hardware. It will cost you a bit more $ (or €) , but it's usually the best Solutio...
by ConnyMercier
Tue Nov 23, 2021 4:51 am
Forum: Scripting
Topic: how to reboot for more than 1 minute
Replies: 7
Views: 2923

Re: how to reboot for more than 1 minute

Create a Scheduler with parameter "start-time=startup"
And use ":delay 60" to wait 60 sec before executing your script.

Exemple :
2021-11-23_03-51-05.jpg
by ConnyMercier
Tue Nov 23, 2021 4:42 am
Forum: Beginner Basics
Topic: Completely separate one eth port from LAN
Replies: 5
Views: 1120

Re: Completely separate one eth port from LAN

Different Solutions for the Problem... But if you want to keep it "Easy", i would create a sepreate Guest-Network / Bridge Basic Setup-Exemple: Step 1: Create Bridge /interface bridge add comment=Guest-Network name=bridge2 Step 2: Assign IP for Guest-Network /ip address add address=192.168...
by ConnyMercier
Tue Nov 23, 2021 4:21 am
Forum: Wireless Networking
Topic: Field Wireless Network
Replies: 6
Views: 2106

Re: Field Wireless Network

But i don't see the Problem using Metal 52 ac in your case. It's Cheaper + has more Range !! whichever solution you adopt : -> Mounting is always going to be a problem... Mikrotik device's aren't really "Waterproof" only IP55 (it may survive the Rain, but not the presure washer) Tractor's ...
by ConnyMercier
Tue Nov 23, 2021 4:20 am
Forum: Wireless Networking
Topic: Field Wireless Network
Replies: 6
Views: 2106

Re: Field Wireless Network

I had to solve similar Problems in the Past.... For the Customer Mobile-Device connectivity was important, so we used an wAP ac LTE kit on the "Main" tractor Basic Setup: --> WLAN 2.4Ghz for the Tractor-Network --> WLAN 5Ghz for the Wireless device in the Tractor (Tablet, Phone, etc..) -->...
by ConnyMercier
Tue Nov 23, 2021 3:05 am
Forum: General
Topic: Not Able To Surf Internet On Mac
Replies: 1
Views: 856

Re: Not Able To Surf Internet On Mac

How do you connect to your Mikrotik-Device ?
Wireless or Cable ?

Do you get an IP-Address via the DHCP-Server ?
by ConnyMercier
Tue Nov 23, 2021 2:56 am
Forum: General
Topic: Internet access via Campground Wifi using Metal 52 ac and a Netgear R6400
Replies: 3
Views: 820

Re: Internet access via Campground Wifi using Metal 52 ac and a Netgear R6400

Most Wireless-Networks do not support Multiple Client behind a Wireless-Client (802.11 limitations for L2 bridging) A lot of different Solutions to this problem... The "Easy" way is to use NAT aka. Configure the Mikrotik as a Router If you need help... Simply POST the actual Config (/expor...
by ConnyMercier
Tue Nov 23, 2021 2:40 am
Forum: General
Topic: Autonegotiation issues between MikroTik switches and servers
Replies: 2
Views: 867

Re: Autonegotiation issues between MikroTik switches and servers

Did you try updating the Mikrotik-Device to the ROS 6.48.5 (Long-term) ?
Some Forum-Users seam to have Problem with ROS 6.49 and SFP /QSFP modules...
Maybe a Bug in the Version....
by ConnyMercier
Tue Nov 23, 2021 2:31 am
Forum: The User Manager
Topic: slow connection speed
Replies: 2
Views: 3734

Re: slow connection speed

The CRS112-8G-4S-IN won't be able to handel the Routing of ISP-Speeds of 1Gpbs
If you take a look at the Mikrotik-Webpage (https://mikrotik.com/product/CRS112-8G- ... estresults)
I wouldn't expect more then 32.8Mbps with this device / configuration
2021-11-23_01-26-42.jpg
by ConnyMercier
Tue Nov 23, 2021 2:24 am
Forum: SwOS
Topic: Disabling ARP Entry
Replies: 3
Views: 3200

Re: Disabling ARP Entry

Yes it it posible to remove a single Entry via CLI Solution 1: Manually remove ARP-Entry First you need to Print all entries via the "/ip arp print" command. This will give you a list with a unique ID for each ARP-Element. Exemple: /ip arp print # ADDRESS MAC-ADDRESS INTERFACE 0 DC 192.168...
by ConnyMercier
Tue Nov 23, 2021 1:41 am
Forum: General
Topic: Unable to access any MT device behind Mikrotik Router
Replies: 17
Views: 1797

Re: Unable to access any MT device behind Mikrotik Router

The "bridge" is missing RB2011UiAS
Is there a reason for this ?
by ConnyMercier
Tue Nov 23, 2021 1:10 am
Forum: General
Topic: Unable to access any MT device behind Mikrotik Router
Replies: 17
Views: 1797

Re: Unable to access any MT device behind Mikrotik Router

Difficult to say.....

We need to take a look at the Config of your Router
If possible please POST Config of RB2011UiAS AND WAP LTE
(/export hide-sensitive file=anynameyoulike)
by ConnyMercier
Tue Nov 23, 2021 1:01 am
Forum: General
Topic: Resetting CRS125-24G-1S-2HnD-IN routerboard
Replies: 1
Views: 637

Re: Resetting CRS125-24G-1S-2HnD-IN routerboard

It's almost invisible =)

23-11-_2021_00-00-44.jpg
by ConnyMercier
Tue Nov 23, 2021 12:53 am
Forum: Beginner Basics
Topic: Establish connection from WiFi to machine on ethernet port
Replies: 2
Views: 1042

Re: Establish connection from WiFi to machine on ethernet port

This is how I would do it... I tried to keep all the same names and IP. Step 1 : Create Bridge /interface bridge add name=Lab-test-bridge Step 2: Assign Interfaces to Bridge (not to Interface!) /interface bridge port add bridge=Lab-test-bridge interface=ether7 add bridge=Lab-test-bridge interface=La...
by ConnyMercier
Tue Nov 23, 2021 12:16 am
Forum: Wireless Networking
Topic: Field Wireless Network
Replies: 6
Views: 2106

Re: Field Wireless Network

Good Morning,

for those of us who don't know nothing about farming... :D
How far appart are the tractors during normal operations ?
10m, 100m , 1 000m, 10 000m ???
by ConnyMercier
Mon Nov 22, 2021 7:24 pm
Forum: General
Topic: Remove poe adapter on wimax antenna
Replies: 3
Views: 684

Re: Remove poe adapter on wimax antenna

I am sorry, I was focused on the "PoE" question... Of course, you may need to edit the configuration of the Mikrotik-Device. If you are comfortable with RouterOS, it shoudn't be a "Problem" -->> Tipp : Make Backups & use Safe-Mode =) If you need help or advice Post the Config...
by ConnyMercier
Mon Nov 22, 2021 6:47 pm
Forum: General
Topic: Remove poe adapter on wimax antenna
Replies: 3
Views: 684

Re: Remove poe adapter on wimax antenna

It depends on the Device you want to Power (aka. wimax-Antenna)

The RB2011UiAS-2HnD-IN only has a Pasive PoE on ether10.
Max out ether10 (input 18-30 V) 510 mA


If the device is compatible, you can connect the device via ether10
and it should be "Plug&Play"
by ConnyMercier
Mon Nov 22, 2021 6:16 pm
Forum: Wireless Networking
Topic: Wireless and Mikrotik - one settlement
Replies: 4
Views: 2504

Re: Wireless and Mikrotik - one settlement

Danke @Andy for the nice summary.
i concur with your results
by ConnyMercier
Mon Nov 22, 2021 5:57 pm
Forum: General
Topic: Router for test environment
Replies: 10
Views: 1444

Re: Router for test environment

I personally learned on two Mikrotik hAP ac lite

But in your case , if you don't need / want Wireless-Interfaces
Maybe a hEX S would be more adequate
by ConnyMercier
Mon Nov 22, 2021 5:38 pm
Forum: RouterOS beta and rc versions
Topic: Health readings with v7 [SOLVED]
Replies: 39
Views: 8854

Re: Health readings with v7 [SOLVED]

Mikrotik-Device : hEX ------------------------------------------------------- MikroTik RouterOS 6.48.5 (hEX) [admin@MikroTik] > :put [/system health get] temperature=42;voltage=273 [admin@MikroTik] > /system health print voltage: 27.3V temperature: 42C -----------------------------------------------...
by ConnyMercier
Mon Nov 22, 2021 5:21 pm
Forum: RouterOS beta and rc versions
Topic: Health readings with v7 [SOLVED]
Replies: 39
Views: 8854

Re: Health readings with v7 [SOLVED]

Mikrotik-Device : hEX S ------------------------------------------------------- MikroTik RouterOS 6.48.5 (hEX S) [admin@MikroTik] > :put [/system health get] temperature=60;voltage=477 [admin@MikroTik] > /system health print voltage: 47.7V temperature: 60C -------------------------------------------...
by ConnyMercier
Mon Nov 22, 2021 5:20 pm
Forum: RouterOS beta and rc versions
Topic: Health readings with v7 [SOLVED]
Replies: 39
Views: 8854

Re: Health readings with v7 [SOLVED]

Mikrotik-Device : CRS112-8P-4S ------------------------------------------------------- MikroTik RouterOS 6.48.4 (CRS112-8P-4S) [admin@MikroTik] > :put [/system health get] psu1-voltage=275;psu2-voltage=484;temperature=45 [admin@MikroTik] > /system health print temperature: 45C psu1-voltage: 27.5V ps...
by ConnyMercier
Mon Nov 22, 2021 4:36 pm
Forum: RouterBOARD hardware
Topic: hEX temperature feedback [SOLVED]
Replies: 5
Views: 4138

Re: hEX temperature feedback [SOLVED]

@krafg, sorry for the late response... Room-Temperature during the Test ca. 16.5°C Results ------------------------ ROS ver.6.48.4 /system health print voltage: 27.2V temperature: 17C ------------------------ ROS ver.6.49.1 /system health print voltage: 27.3V temperature: 20C -----------------------...
by ConnyMercier
Mon Nov 22, 2021 4:00 pm
Forum: RouterBOARD hardware
Topic: Mikrotik switch SFP+ port issue on COLD restart
Replies: 12
Views: 7803

Re: Mikrotik switch SFP+ port issue on COLD restart

I had the same issues with some SFP/SFP+ modules in the past.... SFP-Interfaces worked perfectly, but on some Reboot and/or Cold-Starts the Interface wouldn't properly initiate. We use a Scheduler on "startup" to, 1. Wait 90 Sec. 2. Check SFP/SFP+ Interface (If !running Step 3-6) 3. Disabl...
by ConnyMercier
Mon Nov 22, 2021 12:23 am
Forum: RouterOS beta and rc versions
Topic: Health readings with v7 [SOLVED]
Replies: 39
Views: 8854

Re: Health readings with v7 [SOLVED]

It's seams to be a ROS7 problem...

I upgrade the Swich back to ROS version 6.48.5
The Command :put [/system health get] works normally ..