I have same problem 1036 30% cpu usage, same config in 1072 98% cpu usage

I, i have some ap in wds slave mode and i use pppoe for my user, i need to add ip to wlan interface for management purpose (nagios checker), i have think to add some firewall rules for block all traffic from wlan except traffic to nagios server ip destination... It's a secure way ? can i use other s...

I have installed a RB1100 as a networks access control, but i have a serious problem, cpu go to 100% usage all time, i have 645 users, i have disabled connection tracking, simple queue, firewall mangle eccept global mss-change, natting, pppoe compression, all queue.... i'll must to disable entire RB...

i not understand... if we lost our configs, if config is stored in nand, and if mikrotik have change nand driver in 3.25 ...
Because mikrotik staff have lost several days for locate the problem ?!?!?!?

i have send a supout file

Bye Fr4

ok, i have some other cpe misconfigurated, i told to my techs to make supout.rif before to recofingure this hardware, i hope that mikrotik staff can resolve this issue.

i have to send about 50 supout support ? it have sense if is a isolate problem !!!!!!!! mikrotik staff can't upgrade five routerboard for his self and reproduce the problem ? it'is not hard to replicate.... please , remove 3.25 from stable download, and do a announcement in newsletter for alert user...

i have problem in RB133, RB433 and RB411 i have installed from 3.20, 3.22, 3.24 to 3.25 i have lost in some routers ethernet, bridge, wireless, mpls, dns server, pppoe client configs, in some routers i have lost also scheduler configs Regards FR4 P.s. in all cpe i use wireless-test package in 433 i ...

i have other 433 and 133, and 411 that have lost configuration, please resolve this issue, in two days we have go to twentytree customers and two ap for reconfigure hardware :( this problem occur over reboot or only over upgrade ? I not know if is better downgrade OS or if i can left 3.25. I kown on...

i have too this problem over 100 cpe ten have lost config

Bye Fr4

Hi, Thanks for response in this post the config for ospf and mpls, for routing table i have 608 routes and in some router 2600 remote-binding where is the line that you need for troubleshout ? Thanks router A /routing ospf instance print name="default" router-id=172.16.250.11 distribute-de...

Thanks for reply

i have tried but i this problem

http://forum.mikrotik.com/viewtopic.php?f=14&t=31583

you have any idea for this ?

Bye Fr4

hi, i have some problem with vlps, i have a lot of 433ah with 1522 mtu hardware limit i have understand that i need almost 1540 mtu for vpls, how i must set mtu in /interface ethernet set ether1 mtu=? /mpls interface set 0 mpls-mtu=? /interface vpls set myvpls mtu=? /interface bridge set pop mtu=? /...

Hi have also add TE support, the TE support works Router A : tunnel-id: 1 primary-path-state: established primary-path: dyn secondary-path-state: not-necessary active-path: dyn active-lspid: 1 active-label: 159478 explicit-route: "S:172.16.0.117/32,S:172.16.0.229/32,S:172.16.0.235/32" reco...

Hi, i have started to use mpls/vpls, i have all board with last package test (version 3.23), mpls work fine. but when i create a vpls i have this situation : router A vpls interface: remote-label: 109431 local-label: 1974 remote-status: transport: 172.16.250.11/32 transport-nexthop: 172.16.0.229 imp...

Hi,

I have 20 rb433AH with same ISSUE

Ok, i have send the supout file, i will posted in this post the response for anyone that have this problem

Thanks
Fr4

Hi, I have a network for wisp services, at the moment i have all devices routed with ospf and i collect pppoe in all ap (i have setup a pppoe server for any devices used for ap), this is the best configuration ? I have see a network with all devices in bridge mode, with various vlan (routed in ospf)...

i, seems that exist a trouble with ethernet of recent routerboard.
i have open this poll for see if this problem is for some lots of motherboard or for all, and for open a request to mikrotik staff for resolve this issue

Thanks Fr4

P.s. sorry for my bad english

Yes, but this problem seems to be only for 433AH 411H and 493AH that i think is based on same architecture :( You know if is possible install other OS in this boards ? So i can test if is a hardware problem ... I think that this boards is very sensible to radiofrequency because in some tower the pro...

hi,

I have posted my request in both posts.
I hope that mikrotik resolve this problem because we not can work with 20 bug motherboards

Bye Fr4

p.s. i have open a poll http://forum.mikrotik.com/viewtopic.php?f=3&t=31289 for see if we are alone with this issue

Hi have the same problem, I have a network of 60 AP-Routers and i use RB500,RB600 and i have over of 20 RB433AH, ALL RB433AH have this issue, the ethernet stop of work , and i must go in the tower to restart manually the Devices... This is a very urgent problem, we have a lot of disservice and ours ...

Hi have the same problem, I have a network of 60 AP-Routers and i use RB500,RB600 and i have over of 20 RB433AH, ALL RB433AH have this issue, the ethernet stop of work , and i must go in the tower to restart manually the Devices... This is a very urgent problem, we have a lot of disservice and ours ...

Hi, Thanks for response, i have this problem in all RB433, the interface monitor report link ok - 100 MB fullduplex :( ig i check ip neighbour i find the other radio by eth1 link but i cant' access in mac-telnet, before to stop to work the bandwith-test with other radios is too low (5 - 100k) in one...