MikroTik

daaf

But you can still use my method for put on memory from a file one var of any size, until the memory is depleted... https://forum.mikrotik.com/viewtopic.php?p=1012747#p1012747 True on the data to file... but that still breaks :deserialize, as subject to 64kB limit & a partial fragment of file is...

daaf

With the introduction of the :serialize and :deserialize commands, a world of possibilities opens up for the consumption of the Rest API, however the size of a string variable limits this. Example: https://stat.ripe.net/data /looking-glass/data.json?resource=140.78.0.0/16 cannot be processed due to ...

daaf

Storm rate via winbox...

storm rate.jpeg

daaf

The symptoms of the global variables now appear again in an hAP ax3, something is not being done right in the RouterOS code, they reintroduce bugs that were solved at least in the RB750Gr3.

viewtopic.php?p=944663#p944663

daaf

RouterOS version 7.10beta has been released on the "v7 testing" channel!

daaf

Currently I have done the test on a hAP ac3 (arm) and the same thing happens, the global variables disappear from the environment after a few minutes of closing the winbox. @antonsb @emils @daaf THE BUG STILL EXIST, BUT (for me) HAPPEN ONLY ON MIPSBE !!! (Winbox 3.37 64 bit) I am not able to reply i...

daaf

Understood, I have looked for the changes made in the change log but I have not observed any entry about this. I have also reported the problem of global variables in the following post that I mention without getting any response. viewtopic.php?p=944654#p944663 Disks now have slot, as their name. Th...

daaf

What I'm trying to say is that the "name" attribute no longer exists in this release, so I can't get it, nor can I set it.

What are you trying to do there? Try print before using set. And don't use set numbers, that is used after print, and should be used with number, not name

daaf

I can't set or get the disk name on my hap ac3.

RouterOS version 7.7rc1 has been released "v7 testing" channel!

daaf

The problem of global variables that disappear still persists, someone from mikrotik who can say if they are taking action on the matter, test on hAP AC3?

viewtopic.php?p=944654#p944663

daaf

The problem of global variables that disappear still persists, someone from mikrotik who can say if they are taking action on the matter?

viewtopic.php?p=944654#p944663

daaf

What happened to the scripts? The problem of the environment variables still persists.
viewtopic.php?p=944654#p944663

daaf

1-A better management of the file system. For example, initially I want to create this structure to work with containers: disk1 | +-- docker | +-- containers | +-- images | +-- mount | +-- tmp Currently (ROS7.4rc2) it can only be done via FTP, however this leaves the created folders without sufficie...

daaf

Steps to reproduce the scripts error on a RB750Gr3. 1-Open winbox. 2-Go to menu system/script. 3-Add the hello-word script and place the following code: :global helloWorld; :set helloWorld do={:put "Hello World.";} 4-Run the script. 5-Verify that the global variable "helloWorld" ...

daaf

"helloWorld" is a function that writes "Hello World" and is an example function. @Znevna was able to reproduce the error. I leave this other script ( module-continer ) as an example, it creates a global function "registerContainer", the function works perfectly, the pro...

daaf

The script test is also performed on a RB750Gr3 with the default configuration, and the same thing happens, after 5-10 minutes the global variables disappear. For the scripts, note that it has been happening since 7.4beta5, it is not a matter of debugging the script, because a simple script like the...

daaf

For /system/ssh it worked in the previous release 7.4rc1, but the problem appears in an ac3 hAP with the container package, while in a B750Gr3 the problem does not appear. For the scripts, note that it has been happening since 7.4beta5, it is not a matter of debugging the script, because a simple sc...

daaf

You are right, in this case I forgot to load the SSH key, I apologize. /ip/ssh/always-allow-password-login , regardless of the value, allows SSH login with username and password. Tested on RB750Gr3, hAP ac3. ROS 7.4rc2. Do you have an ssh key installed for your user? This setting decides if password...

daaf

Script:
Global variables disappear, the run counter returns to 0 shortly after the script has been run.

global-function.png

script-function.png

script-function-2.png

daaf

Containers : Mounted drives are not yet created when starting the container. You cannot specify a folder path for /container/config/tmpdir without it already existing, in previous versions it worked and the full path was created when adding a container. You cannot specify a folder path when adding ...

daaf

/system/ssh Fails to login to other SSH servers, repeatedly displays password and then welcome back.
Tested on hAP ac3 with container package. ROS 7.4rc2.
Attached supout.

ssh-fail-login.png

daaf

/ip/ssh/always-allow-password-login, regardless of the value, allows SSH login with username and password.
Tested on RB750Gr3, hAP ac3. ROS 7.4rc2.

ssh-always.png

daaf

Excellent progress, tomorrow I will be reporting some things about version 7.4rc2

Shell containers.png

daaf

The problem with container mounts persists. They are not created at container startup time.

daaf

I installed the "starwarsfan/alpine-sshd" container, put a mount drive pointing to my usb drive (disk3), shut down the other containers, started the "starwarsfan/alpine-sshd" container, connected via SSH and from there create the directories to mount with "mkdir". I've ...

daaf

It happened to me too, I had to create the mount folders by hand. viewtopic.php?p=942234#p942234 someone was able to run adguardhome? share your settings Yeah, I'm no expert here but it seems the mounts don't get created for some reason and something else restricts mkdir from functioning properly. I...

daaf

RB760 iGS switch -> L3 HW Offload it is some mistake? or 750gr3/760igs will be "special" in small device category ? https://help.mikrotik.com/docs/display/ROS/Switch+Chip+Features Bridge HW vlan-filtering was added in the RouterOS 7.1rc1 (for RTL8367) and 7.1rc5 (for MT7621) versions. The...

daaf

Do you have the link to download the container? I share some scripts for the rapid deployment of a container, "container-module" must be run previously to load the global function to register the containers; the other scripts such as "container-pihole" contain the parameters to c...

daaf

I share some scripts for the rapid deployment of a container, "container-module" must be run previously to load the global function to register the containers; the other scripts such as "container-pihole" contain the parameters to create the container, use them by the terminal to...

daaf

Yes, I already tried it and it worked.

Wait, did they silently fix pulling in the internal storage too? it gets pulled in whatever you specify as tmp-dir now?

daaf

Yes, they have made many changes, it has not disappeared, it just does not save the configuration or show it by the terminal. Containers.png Probably they changed too many stuff under the hood. Since the memory limit is gone, envlist changed syntax, they did something to the mounts to fix sudo (prob...

daaf

After upgrading to version 7.4beta5 on my hAP ac3, my setup no longer worked, so I removed the containers, environments and mounts and started over. /container/remove [find]; /container/envs/remove [find]; /container/mounts/remove [find]; Mount the syslog-ng, mariadb, grafana containers; those conta...

daaf

The same thing happened to me on a hAP ac3, delete the containers, environments and mounts and start again, it works for me. Container support is broken for me on arm64 after upgrade from beta4 to beta5. Mount configuration disappeared, as well as maximum ram. Cannot set maximum ram anymore, the val...

daaf

It will remove containers, environments and mount points. /container/remove [find]; /container/envs/remove [find]; /container/mounts/remove [find]; I had to remove the containers and start over. and it worked for me. Would you be so kind as to explain to me how you remove the container, I am an appr...

daaf

I had to remove the containers and start over. and it worked for me.

That I didn't try. And it works?

daaf

"list" replaced with "name", "name" replaced with "key"

Yes, "list" was replaced with "key" but it doesn't work.

daaf

I have used: 0 key="TZ" name="pihole_envs" value="Europe/Riga" 1 key="WEBPASSWORD" name="pihole_envs" value="mysecurepassword" 2 key="DNSMASQ_USER" name="pihole_envs" value="root" Some of those changes are pres...

daaf

After upgrading from 7.4beta4 -> 7.4beta5, my configuration under /container/mounts, /container/envs on a hAP ac3 disappeared.

daaf

Here is a list of containers that I have successfully tested.

container01.jpg

grafana.jpg

daaf

I had the same problem, install starwarsfan/alpine-sshd:latest and got good result, use the following environment variables: ROOT_LOGIN_UNLOCKED="true" ROOT_PASSWORD="123456" Tuve el mismo problema, instale starwarsfan/alpine-sshd:latest y tuve buen resultado, use las siguientes ...

daaf

I have tried following the instructions quoted at https://help.mikrotik.com/docs/display/ROS/Container. Download the container and upload to CHR with the command: amd64 docker pull pihole/pihole:latest@sha256:f56885979dcffeb902d2ca51828c92118199222ffb8f6644505e7881e11eeb85 docker save pihole/pihole ...

Search found 41 matches