Community discussions

MikroTik App

Search found 14 matches

by kovaga
Wed Dec 28, 2022 11:20 am
Forum: General
Topic: Winbox displays misleading information in VRRP ip address and network
Replies: 0
Views: 204

Winbox displays misleading information in VRRP ip address and network

in export add address=192.168.222.251/24 interface=VLAN_CCTV network=192.168.222.0 add address=192.168.222.1 interface=VRRP_CCTV network=192.168.222.0 in CLI and Webinterface 6 192.168.222.251/24 192.168.222.0 VLAN_CCTV 7 192.168.222.1/32 192.168.222.0 VRRP_CCTV in Winbox note its missing /32 .This ...
by kovaga
Wed Dec 28, 2022 11:12 am
Forum: Forwarding Protocols
Topic: presence of VRRP interface prevents ROS from sending ICMP redirects. [SOLVED]
Replies: 1
Views: 2492

presence of VRRP interface prevents ROS from sending ICMP redirects. [SOLVED]

it seems that the presence of VRRP interface prevents the router from responding with an ICMP redirect, if this interface is used as a default gateway for the hosts on the network. So basically, in my setup i have two routers with ether addresses X.251/24 and X.252/24 each of them has a VRRP interfa...
by kovaga
Sat Dec 17, 2022 9:52 am
Forum: General
Topic: WinBox global/default settings
Replies: 8
Views: 2932

Re: WinBox global/default settings

+1 to support the default window settings feature. What is also lacking is the ability to have an optimal column width, so in case the content of the column is greater then its width it would be expanded automatically to show all of the content. Similar to that we have in Excel. i.e. double click on...
by kovaga
Wed Feb 02, 2022 8:40 am
Forum: General
Topic: Wireguard BUGs observed (same UDP ports for multiple interfaces, VRRP unable to connect)
Replies: 3
Views: 992

Re: Wireguard BUGs observed (UDP51820, VRRP)

If the UDP 51820 error was caused by stepping on your own............. suggest remove that part from your title!! Well, I wouldn't consider it my error only. If the port is already taken, then the error message should be generated indicating it. Also, in the situation when the port is changed at th...
by kovaga
Tue Feb 01, 2022 3:26 pm
Forum: General
Topic: Wireguard BUGs observed (same UDP ports for multiple interfaces, VRRP unable to connect)
Replies: 3
Views: 992

Wireguard BUGs observed (same UDP ports for multiple interfaces, VRRP unable to connect)

Hi forum, just would like to share couple of notes regarding the WireGuard implementations. ROS 7.1.1 1. When adding a new wireguard Interface, if I set the port 51820, the interface never becomes Running and its not possible to start it. If I specify any other port it works fine. This behaviour was...
by kovaga
Fri Jan 14, 2022 10:08 am
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223471

Re: v7.1.1 is released!

I have a 4011 with several IPsec sessions that has been running since the day 7.1.1 was released, but it only has "client" sessions and it seems the problems mainly exist in the "server" side. (L2TP/IPsec server, for example) Indeed, thats exactly my case. The client ipsec RB401...
by kovaga
Thu Jan 13, 2022 2:00 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223471

Re: v7.1.1 is released!

One out of 4 RB4011 is constantly rebooting after the upgrade to 7.1.1. The maximum uptime i saw was about 5 minutes. Have disabled IPSEC and now it runs for 3.5 hrs already- The funny thing is that another RB4011 is handling IPSEC connection just fine and has an uptime of 5 days with pretty much id...
by kovaga
Thu Jun 03, 2021 3:35 pm
Forum: General
Topic: booting problem with serial console attached [SOLVED]
Replies: 3
Views: 979

Re: booting problem with serial console attached [SOLVED]

NO, the problem is the use On boot second serial receive the video output of bios, the second RB can interpret it as commands for login. All is exactly go as expected Simply paste /sys routerboard settings set enter-setup-on=delete-key on both routerboard for not have problem on boot, but error on ...
by kovaga
Thu Jun 03, 2021 11:07 am
Forum: General
Topic: booting problem with serial console attached [SOLVED]
Replies: 3
Views: 979

booting problem with serial console attached [SOLVED]

I have observed a situation when two mikrotik devices are connected with a rollover serial cable and device1 is rebooted, it is subsequently unable to boot and the other device (device2) receives the following messages in terminal: 09:55:04 echo: system,error,critical login failure for user .2 via l...
by kovaga
Tue Apr 13, 2021 9:48 am
Forum: RouterBOARD hardware
Topic: interconnecting CRS326 with Q+DA0001 cable
Replies: 1
Views: 933

Re: interconnecting CRS326 with Q+DA0001 cable

Ah, silly me.

Didn't notice that the the qsfpplus1-1 interface had negotiated speed of "Rate 40Gbps"
by kovaga
Tue Apr 13, 2021 9:27 am
Forum: RouterBOARD hardware
Topic: interconnecting CRS326 with Q+DA0001 cable
Replies: 1
Views: 933

interconnecting CRS326 with Q+DA0001 cable

Morning guys, setting up two of the CRS326-24S+2Q+RM switches and have interconnected them with Q+DA0001. In theory and from what I read on the forum, a single 40Gbe interface should appear in the Interface list. However, instead I see 4 x qsfpplus1-{1,2,3,4} interfaces with a speed of 10G each. The...
by kovaga
Wed Jan 22, 2020 8:16 am
Forum: Forwarding Protocols
Topic: default route via OpenVPN
Replies: 4
Views: 8583

Re: default route via OpenVPN

There is a good thread on it here.

viewtopic.php?t=136465
Thanks!
by kovaga
Tue Jan 21, 2020 4:41 pm
Forum: Forwarding Protocols
Topic: default route via OpenVPN
Replies: 4
Views: 8583

Re: default route via OpenVPN

The problem you are having is more than one default route. With a few exceptions that prob don't apply here, you can't have more than one active. The solution depends on whether you use the router for more than just this VPN or of it's dedicated to only the VPN. If yes, then you may want to create ...
by kovaga
Mon Jan 20, 2020 8:39 pm
Forum: Forwarding Protocols
Topic: default route via OpenVPN
Replies: 4
Views: 8583

default route via OpenVPN

Hi list, i have an OpenVPN connection and would like ll traffic to go via it. I have selected the "Add Default Route" option in the client configuration, and I can see that the default route is added to the routing table, however it is inactive. So the question is how do I automatically ac...