Community discussions

MikroTik App

Search found 34 matches

by sandov63
Mon Oct 22, 2012 8:53 am
Forum: General
Topic: Mikrotik Equivelent Of Cisco "switchport trunk native vlan x
Replies: 3
Views: 1814

Re: Mikrotik Equivelent Of Cisco "switchport trunk native vl

i have a similar question, but what happend if i connect a port with trunk from a cisco to mikrotik with a native vlan x ? do they negociate well? cisco needs the two ports o both side of the trunk have the same native vlan, mk does not have this command

excuseme by my poor english
by sandov63
Tue Oct 16, 2012 6:49 am
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 46562

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

Normally, ordinary queries use UDP, and zone transfers use TCP. However, DNS limits UDP queries and responses to about 500 bytes. If a response would be larger than that, the server sends back up to 500 bytes and sets the "truncated" flag. The client is then supposed to perform the same query again ...
by sandov63
Tue Oct 16, 2012 6:29 am
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 46562

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

solved chek this nslookup www.hotmail.com ;; Got SERVFAIL reply from 192.168.30.2, trying next server ;; Truncated, retrying in TCP mode. Server: 192.168.30.2 Address: 192.168.30.2#53 Non-authoritative answer: www.hotmail.com canonical name = dispatch.kahuna.glbdns.microsoft.com. Name: dispatch.kahu...
by sandov63
Fri Jan 07, 2011 9:41 pm
Forum: Beginner Basics
Topic: load balance on wans with dhcp server
Replies: 2
Views: 1083

Re: load balance on wans with dhcp server

thanks fewi thats the way :)
by sandov63
Fri Jan 07, 2011 9:37 pm
Forum: General
Topic: does it normal? web proxy error
Replies: 2
Views: 610

Re: does it normal? web proxy error

thanks a lot normis i was searching the entire www about, and no post or anybody with the same message log, thanks
by sandov63
Fri Jan 07, 2011 5:39 am
Forum: General
Topic: does it normal? web proxy error
Replies: 2
Views: 610

does it normal? web proxy error

it appears always on logs
 2009.07.29-22:08:44: web-proxy,account 10.10.3.20 GET http://images.google.com.tr/csi?v=3&s=i ... ,xjs.12140 action=allow cache=MISS
why cache miss?
by sandov63
Fri Jan 07, 2011 5:33 am
Forum: Beginner Basics
Topic: Logging web-proxy account that only with GET options
Replies: 2
Views: 933

Re: Logging web-proxy account that only with GET options

does it normal? its fine? 2009.07.29-22:08:44: web-proxy,account 10.10.3.20 GET http://images.google.com.tr/csi?v=3&s=i ... ,xjs.12140 action=allow cache=MISS ?
i have lots o message like
by sandov63
Sun Oct 10, 2010 9:32 am
Forum: Scripting
Topic: Script Star
Replies: 8
Views: 2166

Re: Script Star

Hola, mi consulta es la siguiente, necesito un script para que una terea de scheduling arranque todos los dias 15 por ejemplo, ya que no todos los meses tienen 30 dias. si alguien tiene alguna idea se lo agradecere. traducido-> translated, simplified ( hello i need a script that starts a schedule be...
by sandov63
Wed Jun 16, 2010 10:22 pm
Forum: General
Topic: Mikrotik and Block IP
Replies: 8
Views: 2245

Re: Mikrotik and Block IP

close ftp port if u dont need it
by sandov63
Mon Jun 07, 2010 6:13 pm
Forum: Beginner Basics
Topic: load balance on wans with dhcp server
Replies: 2
Views: 1083

load balance on wans with dhcp server

Hi , all example seen in this foro used static ip address on wan interface, here in venezuela for example , ips assignment on wan is done through a dhcp server on that wan. so in wich manner its posible execute a proper load balance over 2 wan if its ip addresses change eventually??? all examples se...
by sandov63
Fri Aug 29, 2008 10:25 pm
Forum: General
Topic: webproxy action=allow cache=MISS
Replies: 2
Views: 1392

Re: webproxy action=allow cache=MISS

are you clients able to navigate? do you upgrade from os 2.xxx to 3.xxx ? if true thats the problem, the web-proxy isnt present any more for os 3.0 and posibly you mount and old configuration from 2.xxx to 3.xx system,, im not sure of that but it happend to me and i roll back my os to 2.9 system exc...
by sandov63
Tue Aug 19, 2008 7:13 pm
Forum: General
Topic: mikrotik doesn't drop ares on v3.11
Replies: 5
Views: 1920

Re: mikrotik doesn't drop ares on v3.11

i think this type of traffic doesnt stop easy, because it uses randon ports and mt only knows wich kind of traffic after the second packet stablishement or something like that, can anybody hear it or explain it?
by sandov63
Tue Aug 19, 2008 7:03 pm
Forum: General
Topic: V3 inline manual refers to V2.9
Replies: 4
Views: 1126

Re: V3 inline manual refers to V2.9

yes i saw, can someboby explain?
by sandov63
Tue Aug 19, 2008 6:37 pm
Forum: General
Topic: CMTS PCI card
Replies: 5
Views: 2413

Re: CMTS PCI card

wao if mikrotik company develop for cable modems systems many companys will be instrested, in particular multivision, my company, im interested
by sandov63
Wed Jul 09, 2008 10:38 pm
Forum: General
Topic: routeros disconnect some remote client regularly
Replies: 4
Views: 1271

Re: routeros disconnect some remote client regularly

where are the gurus when we need the most???
by sandov63
Wed Jul 09, 2008 4:25 pm
Forum: General
Topic: 2.4 or 5.8 for my setup?
Replies: 13
Views: 1609

Re: 2.4 or 5.8 for my setup?

i have 3x120 degree sectorial 2.4ghz 15dbi antennas and with 60+ clients working great. I have clients connected till 4km with 15dbi grid antenna with a good rx signal. U can get -70 or better with this config on 5km i suppose :D(with 15dbi grid). I think that there is no need to spend much money t...
by sandov63
Tue Jun 24, 2008 1:14 am
Forum: Wireless Networking
Topic: Hotpsot M/k to another Hotspot M/k.. problem with proxy
Replies: 2
Views: 1207

Re: Hotpsot M/k to another Hotspot M/k.. problem with proxy

yes i have same configuration and just this time im configuring ip and por to be the other mt, thats the problem and , altouhg im passing trough the first mt witout pasing trough the hotspot i ihave same problem,, excuseme for my poor english
by sandov63
Fri Mar 14, 2008 10:52 pm
Forum: General
Topic: how to block dhcp from my client to me!!
Replies: 7
Views: 1722

Re: how to block dhcp from my client to me!!

built this rule under ip -> firewall -->> filter rules add chain=forward action=drop dst-port=68 protocol=udp comment="DROP DHCP \ SERVERS" disabled=no add chain=input action=drop dst-port=68 protocol=udp comment="" disabled=no this way you are blocking broadcasting from port 68 of users whose wake ...
by sandov63
Mon Feb 25, 2008 3:54 pm
Forum: General
Topic: load balancing across multiple pppoe connections
Replies: 18
Views: 5054

Re: load balancing across multiple pppoe connections

should work like this:

Code:
[normis@demo2.mt.lv] > ip route add gateway=
wlan1 wlan2 ether1 ether2



Normis it doesnt work,, look


[admin@Mult] ip route> add gateway=ether1
invalid value for argument address
by sandov63
Thu Feb 21, 2008 11:35 pm
Forum: General
Topic: Load Balancing, Any problems?
Replies: 9
Views: 2849

Re: Load Balancing, Any problems?

HI how can i do load balance with fail over with two adsl modems with only my mikrotik system? i have 2 adsl modems asigning ip on dhcp
by sandov63
Thu Feb 21, 2008 11:28 pm
Forum: General
Topic: Public IP to users in my hotspot
Replies: 7
Views: 1286

Re: Public IP to users in my hotspot

wk
by sandov63
Thu Feb 21, 2008 11:05 pm
Forum: General
Topic: load balancer
Replies: 4
Views: 914

Re: load balancer

hey at least not for me or i guess so,, all load balance with fail over i ever seen in this post treat equal,, 1 2 3 or more conections with statics and privates ip's on wan sides but.... i have 2 adsl modems trhowing public and dynamics ips to my nics card on my mikrotik so.. how can i do load bala...
by sandov63
Thu Feb 21, 2008 12:17 am
Forum: General
Topic: Load balance
Replies: 6
Views: 1208

Re: Load balance

a question,, i have two adsl modems how can i do load balance with fail over if it asign ip trough
dhcp,, dinamyc?

an example please
by sandov63
Thu Feb 21, 2008 12:14 am
Forum: General
Topic: Load balance over same GW
Replies: 4
Views: 1259

Re: Load balance over same GW

cmit how i can do load balancing with failover with two adsl modems if it asign dhcp ips ?
can you give me an example?
by sandov63
Thu Feb 21, 2008 12:11 am
Forum: General
Topic: Load-Balance with dynamic gatway setings
Replies: 8
Views: 2178

Re: Load-Balance with dynamic gatway setings

I have the same question ,, i think theres nobody with knowledge of this in all over the forum?
i had posted this same question many times without response
by sandov63
Wed Feb 20, 2008 11:58 pm
Forum: General
Topic: Load Balance with Fail Over
Replies: 15
Views: 10091

Re: Load Balance with Fail Over

A question for you,, how to do load balance with failover with 2 adsl modems if it asign to me dynamyc ip addresing? how i put it (1 ADC dst-address=10.10.2.0/30 pref-src=10.10.2.2 interface=ether2 scope=10 target-scope=0) OR ( A S dst-address=0.0.0.0/0 gateway=10.10.1.1 check-gateway=ping interface...
by sandov63
Wed Feb 20, 2008 11:50 pm
Forum: General
Topic: 2 wan ip 1 gateway 1lan
Replies: 3
Views: 994

Re: 2 wan ip 1 gateway 1lan

A question for you,, how to do load balancing with failover with 2 adsl modems if it asign ip dhcp address?
by sandov63
Wed Feb 20, 2008 11:36 pm
Forum: General
Topic: Load Balance
Replies: 11
Views: 2246

Re: Load Balance

Gentlemans i have a questions for you,, how to do load balance with failover with two ADSL modems if ip's in wan are dhcp asigned? can you give me an example? with ip in wan in dhcp asigned with 2 ADSL modems?
regards
by sandov63
Wed Feb 20, 2008 11:23 pm
Forum: General
Topic: LOAD BALANCING WITH FAILOVER ON ADSL
Replies: 1
Views: 773

LOAD BALANCING WITH FAILOVER ON ADSL

My question is,, how to do load balancing with failover within 2 more conecctions on wan interfaces if this vary its ip because dhcp? (example ADSL MODEMS) the CONFIGURATIONS seen evrywhere this page have examples with ip static asigned. can somebody give me an example of load balancing with failove...
by sandov63
Fri Feb 15, 2008 3:15 pm
Forum: General
Topic: No web proxy in 3.0Beta1?
Replies: 5
Views: 1979

Re: No web proxy in 3.0Beta1?

hi, a question for you, if it is in the system menu, why i install 3.0 stable version and i restore a backup made out of 2.9.50 version and a message showing something like '192.168.100.50 to http://www.hotmail.com cache miss'' apears ?. i restore and old configuration stored,


best regards
by sandov63
Thu Feb 14, 2008 6:24 pm
Forum: General
Topic: Upgrading from 2.9.x to 3.0?
Replies: 5
Views: 2041

Re: Upgrading from 2.9.x to 3.0?

webproxy package is integrated now. there should be nothing that breaks your setup, and although there are a lot of improvements, nothing should break. Could yo tell me where is web-proxy? i upgrade from 2.50 to 3.0 and i have a message some like '192.168.100.49 to http://www.hotmail.com error cache...
by sandov63
Fri Feb 08, 2008 3:52 pm
Forum: Beginner Basics
Topic: ADVERTISEMENT URL FOR DISABLED USERS
Replies: 2
Views: 1299

Re: ADVERTISEMENT URL FOR DISABLED USERS

thanks but theres a problem with that configuration for me, the page in the wiki example is the main login.html , if i edit this page with information showing ''you have no paid''.. whose page will be shown for a normal client autentication whose have been paid? my second question about this wiki is...
by sandov63
Thu Feb 07, 2008 11:43 pm
Forum: Beginner Basics
Topic: ADVERTISEMENT URL FOR DISABLED USERS
Replies: 2
Views: 1299

ADVERTISEMENT URL FOR DISABLED USERS

I have hotspot configured so every client have to log in on it i want to create a profile that disable some clients and shows an advertise page aloccated inside my MK telling the user is disabled (its payment hour). so wich manner do i know the url inside my MK ? (EXample.. advertise-url (multiple c...
by sandov63
Mon Jun 25, 2007 9:25 pm
Forum: General
Topic: Doest Mikrotik support Intel?
Replies: 6
Views: 1380

Re: Doest Mikrotik support Intel?

I have seen it too.. so i had change my brand intel motherboard to an old 748 i guess pc chip and it work at all.

i had the same mesages like you and it was the solution for me.

excuseme for my poor english.