finally find it in hyper-v on the nic you have to apply spoofing mac address....

hi i just change the vrrp address both side for /32 same results...

hi , i create two clean chr instance with one internal link to test vrrp and i only manage to get MASTER on both side... i can ping between the two interface when vrrp is disabled. the only config on them is this. Is a clean install i just try to figure out why is not working... no filter rules noth...

i just do some benchmarking and single thread performance make a HUGE difference . The best cpu i found so far bang for the buck performance is the 8600k i can push over 70 gbps on hyper-v

im on my way too switch to chr... Im in my testing so what i learn so far is single thread performance is a big fact to obtain bandwidth speed and convergence ... I do a small bandwidth test on hyper-v with my station 2600x and i got around 40 gbps... So im looking to go to the intel 8600k wich have...

i just put a log rules and catchup already a rogue ip...
19:17:16 firewall,info winboxtest input: in:ether1-BGP out:(unknown 0), src-mac de:ad:b3:3f:ba:ad:f0:0d, proto TCP (SYN), 181.214.87.34:41028->xxx.xxx.xxx.xxx:8291, len 40

Sorry i don't have the time to take pic... I have a lot of customers down and on this network i have 2 special client that work for the government... So i have to put it back on in the shortest time i can... For the story the tower was grounded. I use cat5e with ground cable and metal rj45 connector...

 One of my relay tower got a lightning struck at 23:33PM :P Results of damage... 5 Burn cat5e cable... 2 X EPMP 5 Ghz GPS. DEATH! 2 X Mikrotik 750UP Explode! 1 X UBiquiti Rocket M2 Titatium. DEATH! 1 X Ubiquiti Rocket M5. DEATH! 1 X Mikrotik SXT 5 Ghz. THE ONLY ONE TO SURVIVE! and work like a charm!

On the other post i make a lot of test last 2 week and the only thing i can point on is latency and tcp window scaling... im not a specialist and maybe im wrong but all my test point to this. check the other post for my test. Plz MKT i know you work hard and its very difficult to please everybody(im...

Hi, First sorry for my bad english... I make a LOOOOOT of test in the 2 last week. But i think i got a hint. TCP Window Scaling... I have a network i mostly use only for test with client aware of and i give them a rebate.... On the last hop i have a Rocket Titanium M2 for ap to client(on airmax) and...

bclewl1ns we are on the same boat. I willing to pay if someone can fix my problem. So if there anybody have a pratical solutions before i start to phase out my mikrotik wireless backhaul let me know... I willing to pay!

HI , i just start test Cambium GPS sync AP in the 2.4ghz and i got Strange problem when i hit the nv2... 3 to 4 mbps througput in PPPOE... But if i connect to pppoe from the 750UP at the base station they go well!. If i deactivated the NV2 and go to 802.11 of the backhaul from the Base Station to th...

Hi , i dont know if it a really bad coincidence but i upgrade one of my relay with a sxt to make a ptp to a 802.11a AP on vertical polarity temporary . I waiting the winter finish to upgrade the AP with another SXT. I use the SXT in Station mode on 5.12 with vpls over. I never touch TX power (leave ...

did you sove ur problem. I got a similar setup. I got it working but i just problem too connect between the two ip range but for net is working

Hi , if someone have ever face this problem and give me a hint how to deal with that i will be very happy... Here The problem I have a fiber access and for example i got my first range for example 10.0.156.128/25 with gateway at 10.0.156.129. Now this range is almost full. So i ask a new /25 range i...

I have only 2 question ...

Does 802.11n work with hwmp+ mesh ( i know about the wds issue)

i wanna know if 802.11n in wds mode are more fast then a standard 802.11a wds despite de wds problem

Hi i just install a new relay with a rb600. On it i put one XR5 , one XR2 and a XR9. I used a industrial 48V 2AMP Power supply not on pppoe because i got some problem on pppoe. But the guy who responsible to install the stuff on the tower told me that the board make a strange noise... So i dont know...