Community discussions

MikroTik App

Search found 239 matches

by cieplik206
Sun Mar 22, 2020 9:16 pm
Forum: Beginner Basics
Topic: MikroTik Mtcna Home Learning
Replies: 13
Views: 2848

Re: MikroTik Mtcna Home Learning

It's very good video training ;) . What about other levels (MTCRE .... ) ? You have plans to create them ?
Yes I do
by cieplik206
Sat Mar 21, 2020 10:53 pm
Forum: Beginner Basics
Topic: MikroTik Mtcna Home Learning
Replies: 13
Views: 2848

Re: MikroTik Mtcna Home Learning

You will be only MTUNA. It doesn't look any worse than MTCNA, as long as you don't tell anyone that it's made up. ;) Well I do eat lots of tuna, so I guess I am already half there!! ;-) -eats tuna -can spell mikrotik -can spot latvia on a map. Certificate please!!! You did not mentioned you can pro...
by cieplik206
Sat Mar 21, 2020 3:47 pm
Forum: Beginner Basics
Topic: MikroTik Mtcna Home Learning
Replies: 13
Views: 2848

Re: MikroTik Mtcna Home Learning

Policy can change, this is true, so far, no exam is available.
by cieplik206
Thu Mar 19, 2020 12:58 pm
Forum: Beginner Basics
Topic: MikroTik Mtcna Home Learning
Replies: 13
Views: 2848

MikroTik Mtcna Home Learning

Hello Everyone Due to Coronavirus pandemic I highly encourage everyone to stay at home. For this hard time I decided to lower price on my MTCNA Online Materials by 80%. If you planned to go to MTCNA training at it was postponed you can learn online here for only 19$ https://courses.wispcasts.com/p/m...
by cieplik206
Tue Jun 25, 2019 11:41 pm
Forum: General
Topic: Best Way to Isolate Bridges to Reach Each Other's IPs
Replies: 26
Views: 3193

Re: Best Way to Isolate Bridges to Reach Each Other's IPs

You may not need an address matched at all or use an address list
by cieplik206
Tue Jun 25, 2019 11:40 pm
Forum: General
Topic: Best Way to Isolate Bridges to Reach Each Other's IPs
Replies: 26
Views: 3193

Re: Best Way to Isolate Bridges to Reach Each Other's IPs

You may not need an address matched at all or use an address list
by cieplik206
Sat May 18, 2019 7:33 pm
Forum: General
Topic: Ethernet interface Up\Down
Replies: 1
Views: 579

Re: Ethernet interface Up\Down

Broken cable maybe?
by cieplik206
Sat May 18, 2019 7:30 pm
Forum: General
Topic: Question - Bandwidth shaping (PtMP) per CPE using Mikrotik router
Replies: 2
Views: 527

Re: Question - Bandwidth shaping (PtMP) per CPE using Mikrotik router

If your cpe’s will be working in router mode with NAT then simple queue per cpe or PCQ might work.
by cieplik206
Sat May 18, 2019 7:27 pm
Forum: General
Topic: CRS 305 briked [SOLVED]
Replies: 2
Views: 583

Re: CRS 305 briked [SOLVED]

If Netinstall procedure is not working then RMA
by cieplik206
Sat May 18, 2019 7:24 pm
Forum: General
Topic: Can't see local IPs from VPN
Replies: 9
Views: 2721

Re: Can't see local IPs from VPN

Hard to tell without more details but I can guess you would be able to access local IP throu VPN if LAN local interface ARP settings will be changed from “enable” to “proxy arp”.

Check that and let us know
by cieplik206
Wed May 15, 2019 5:58 pm
Forum: General
Topic: remove "development" from the update menu?
Replies: 2
Views: 509

Re: remove "development" from the update menu?

+1 from me
by cieplik206
Sun May 05, 2019 8:39 am
Forum: Beginner Basics
Topic: DHCP Server conflict (same address pool)
Replies: 4
Views: 1253

Re: DHCP Server conflict (same address pool)

I still don't see any reason having the same address pool, different guest network have different subnet, DHCP server and different pool. If you paste here the output of: /interfaces export /ip address print /ip dhcp-server export /ip hotspot print I'll maybe understand your situation better and giv...
by cieplik206
Sat May 04, 2019 11:47 pm
Forum: Beginner Basics
Topic: DHCP Server conflict (same address pool)
Replies: 4
Views: 1253

Re: DHCP Server conflict (same address pool)

Just a pool - NO

From guessing what you might wanted to achieve check if you have valid IP and subnet on every vlan interface.

May I asked why do you need same pool for multiple interfaces ?
by cieplik206
Sat May 04, 2019 7:38 pm
Forum: Beginner Basics
Topic: Can't access admin console (Web and Winbox) via IP after switching to CAP [SOLVED]
Replies: 5
Views: 2093

Re: Can't access admin console (Web and Winbox) via IP after switching to CAP [SOLVED]

That’s weird.

Paste your config here, maybe I can spot something
by cieplik206
Sat May 04, 2019 3:56 pm
Forum: Beginner Basics
Topic: Long DNS timeouts
Replies: 10
Views: 2618

Re: Long DNS timeouts

Remove this as well, is not needed

/ip dns static
add address=208.67.222.222 name=208.67.222.222
add address=208.67.222.220 name=208.67.222.220

And your isp via DHCP was giving you dns that might be slow. By turning off use-peer-dns you told your router to not use dns provided by dhcp
by cieplik206
Sat May 04, 2019 1:16 pm
Forum: Beginner Basics
Topic: Can't access admin console (Web and Winbox) via IP after switching to CAP [SOLVED]
Replies: 5
Views: 2093

Re: Can't access admin console (Web and Winbox) via IP after switching to CAP [SOLVED]

Is your Cap client traffic bridged or tunnelled? If tunneled you Might not be able to access cap from wireless interface.

Either way I recommend using romon in those situations
by cieplik206
Sat May 04, 2019 1:12 pm
Forum: Beginner Basics
Topic: Long DNS timeouts
Replies: 10
Views: 2618

Re: Long DNS timeouts

Is router itself resolving dns well?

Check it in ping tool or in console.

Paste
/ip dns export here
by cieplik206
Sat May 04, 2019 10:11 am
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 19
Views: 3843

Re: Bridge interface not showing traffic [SOLVED]

Show us diagram how everything is interconnected
by cieplik206
Sat May 04, 2019 7:47 am
Forum: General
Topic: Help: Allow only Facebook by domain
Replies: 10
Views: 1407

Re: Help: Allow only Facebook by domain

any idea?
i tried to block facebook and allow all
but the hard thing is to allow facebook and block all

Silly question but did you allowed dns traffic as well?
by cieplik206
Sat May 04, 2019 7:17 am
Forum: Beginner Basics
Topic: Open port between Guest WIFI and my main network [SOLVED]
Replies: 23
Views: 2332

Re: Open port between Guest WIFI and my main network [SOLVED]

for blocking access between networks firewall can be used
by cieplik206
Sat May 04, 2019 12:56 am
Forum: Beginner Basics
Topic: Reset Factory Default without pressing Reset button [SOLVED]
Replies: 4
Views: 1386

Re: Reset Factory Default without pressing Reset button [SOLVED]

theoretically, you can use a serial to access bios, but RB951 does not have one, so the answer is NO.
by cieplik206
Sat May 04, 2019 12:51 am
Forum: Beginner Basics
Topic: Open port between Guest WIFI and my main network [SOLVED]
Replies: 23
Views: 2332

Re: Open port between Guest WIFI and my main network [SOLVED]

Why not avoiding using Guest Wifi for cameras and other non-guest devices?

You can add a VirtualAP and use a virtual SSID for cameras. I believe this will be a lot easier for you
by cieplik206
Sat May 04, 2019 12:49 am
Forum: Beginner Basics
Topic: Accessing DDNS address (WAN) from LAN [SOLVED]
Replies: 4
Views: 936

Re: Accessing DDNS address (WAN) from LAN [SOLVED]

Please explain what exactly are you trying to do
by cieplik206
Sat May 04, 2019 12:48 am
Forum: Beginner Basics
Topic: In over my head
Replies: 8
Views: 2045

Re: In over my head

There is no need to use quick set every time.

If you manage to connect in marina then in different marrina go to Wireless menu and connect to different AP.

Define new Security profile for new network
change SSID and maybe other settings on the wireless interface, wireless tab
by cieplik206
Sat Mar 30, 2019 11:14 pm
Forum: Beginner Basics
Topic: Can someone help identify this router..
Replies: 8
Views: 1632

Re: Can someone help identify this router..

Looks like RB750
by cieplik206
Sat Jun 03, 2017 9:14 am
Forum: Wireless Networking
Topic: WDS vs Repeater
Replies: 0
Views: 899

WDS vs Repeater

Hello Now with Mikrotik you can set up wireless repeater by setting: 1. ]two devices in AP WDS mode 2. ]setting up repeater (client + ap) From my knoledge and understanding Pros for WDS is: * no problems with all chipsets but PROS for Repeater : * no compatibility problem between 11n and WDS[/list] ...
by cieplik206
Fri Mar 25, 2016 8:19 pm
Forum: General
Topic: Responsive Mikrotik Login Page - GITHUB source
Replies: 4
Views: 19323

Re: Responsive Mikrotik Login Page - GITHUB source

This Login Page will be covered in WispCasts on series about HotSpot

First video is already out.

https://wispcasts.com/videos/hotspot-service
by cieplik206
Sat Mar 19, 2016 3:46 am
Forum: General
Topic: Responsive Mikrotik Login Page - GITHUB source
Replies: 4
Views: 19323

Responsive Mikrotik Login Page - GITHUB source

Hi If you want a responsive mikrotik hotspot login page i can share with you an example files can be found here: https://github.com/wispcasts/mikrotik-hotspot-page Example of desktop version ZZ-desktop.png Example of mobile version ZZ-mobile.png Login page: Zrzut ekranu 2016-03-19 01.48.06.png
by cieplik206
Sat Feb 13, 2016 12:17 am
Forum: Beginner Basics
Topic: Backup Files - how to make then and how to encrypt files - VIDEO
Replies: 0
Views: 493

Backup Files - how to make then and how to encrypt files - VIDEO

Hello Folks

I've made video about backups and uploaded it to Wispcasts.

https://www.wispcasts.com/2016/02/11/in ... h-backups/

What do you think?
by cieplik206
Mon Feb 08, 2016 6:31 pm
Forum: Beginner Basics
Topic: Wispcasts website
Replies: 0
Views: 502

Wispcasts website

Hello I've launched a project called Wispcasts - a blog website with Mikrotik Video Tutorials (www.wispcasts.com) First topic covers all Mikrotik baisc Introduction. If you like this project and general Idea please give us a feedback on page fanpage https://web.facebook.com/wispcasts/?ref=hl BR Pawel
by cieplik206
Sun Feb 07, 2016 12:58 pm
Forum: General
Topic: Mikrotik Video Tutorials
Replies: 2
Views: 856

Re: Mikrotik Video Tutorials

Nope,

as Youtube do not have few interesting features

You can also see all publushed videos here: www.wispcasts.com
by cieplik206
Sat Feb 06, 2016 11:24 am
Forum: General
Topic: Mikrotik Video Tutorials
Replies: 2
Views: 856

Mikrotik Video Tutorials

Hello

I would like to share with you guys a link to Facebook Fanpage where I am planning to post a video tutorial about Mikrotik RouterOS.

If you are interested here is it the link

https://www.facebook.com/wispcasts/?fref=nf
by cieplik206
Thu Mar 12, 2015 12:00 pm
Forum: General
Topic: Calculating Bursts
Replies: 6
Views: 2240

Re: Calculating Bursts

I thought it was interesting to see how that early in the transfer, the average utilization can continue to climb even after burst ends and throughput is lower than the running average. It's also interesting to see how limiting bursts too much can make a transfer take a LOT longer. From a congestio...
by cieplik206
Thu Mar 12, 2015 11:58 am
Forum: General
Topic: Calculating Bursts
Replies: 6
Views: 2240

Re: Calculating Bursts

Thanks for your feedback. I blag you like this tool.

For collegue post higher, Burst threshold should be lower then max limit.

check link on first post to find out best setting for yourself,
http://www.ip-pro.pl/kalkulator/burst_simulator
by cieplik206
Wed Mar 11, 2015 11:34 am
Forum: General
Topic: Calculating Bursts
Replies: 6
Views: 2240

Calculating Bursts

Hello

I've redone my Burst Calculator

http://www.ip-pro.pl/kalkulator/burst_simulator


What do you think ?
by cieplik206
Sun May 04, 2014 9:06 pm
Forum: Wireless Networking
Topic: dynamic-mesh instability issues
Replies: 4
Views: 1718

Re: dynamic-mesh instability issues

You could go safely to 4.17 on those boards i think
by cieplik206
Fri Jul 13, 2012 11:49 am
Forum: General
Topic: CoDel support?
Replies: 45
Views: 15576

Re: CoDel support?

Yes, my VOTE as well

Red about it some time ago. CoDel should be in Kernel in 3.5 Version so maybe.

It is primising advantage especialy over wireless networks
by cieplik206
Fri Jul 13, 2012 11:39 am
Forum: General
Topic: SOLVED Restrict one VAP to internet access only
Replies: 5
Views: 1238

Re: Restrict one VAP to internet access only

Hi

You can use either IP/Firewall for bridged interfaces but you must to enable this feature in bridge settings.

Or.

Try to use Bridge/Filter.
by cieplik206
Mon Apr 23, 2012 2:46 pm
Forum: General
Topic: Simple PMS Integration
Replies: 4
Views: 2608

Re: Simple PMS Integration

Hello Mark

I can help with integrating your Software with Mikrotik

best interface to work with will be Mikrotik API
http://wiki.mikrotik.com/wiki/Manual:API
by cieplik206
Mon Apr 23, 2012 2:30 pm
Forum: General
Topic: MT as network's DNS cache
Replies: 1
Views: 663

Re: MT as network's DNS cache

Yes it should work
by cieplik206
Tue Feb 28, 2012 11:19 pm
Forum: Beginner Basics
Topic: pppoe client setup
Replies: 1
Views: 777

Re: pppoe client setup

Set wlan interface to ap bridge
set ip address on wlan interface
set nat rule (/ip firewall nat add chain=dstnat out-interface=pppoe-out1 action=masquarade)
make a DHCP server on wlan1 interface


that will be it
by cieplik206
Tue Feb 28, 2012 11:10 pm
Forum: General
Topic: IP filter and blocking entire country lists
Replies: 3
Views: 4532

Re: IP filter and blocking entire country lists

add those addresses into address-list and drop all connections from taht address-list

Performance will be much better
by cieplik206
Tue Feb 28, 2012 11:07 pm
Forum: Wireless Networking
Topic: Setting DTIM for Multicast
Replies: 5
Views: 2323

Re: Setting DTIM for Multicast

there is no DTIM settings in Mikrotik

To improve Multicast performance do not forget about basic-rates to set to higher modulations.
by cieplik206
Tue Feb 28, 2012 11:05 pm
Forum: Forwarding Protocols
Topic: HELP and Port forwarding and virus firewall drop
Replies: 2
Views: 2028

Re: HELP and Port forwarding and virus firewall drop

LOOK at http://wiki.mikrotik.com/wiki/Manual:IP ... nation_NAT for your SSH forwarding


for Viruses you need to know each virus PORT and protocol, its not that simple
by cieplik206
Tue Feb 28, 2012 11:03 pm
Forum: General
Topic: Best Practices?
Replies: 1
Views: 622

Re: Best Practices?

You should always set up IP Address on Bridge Interface instead on Bridge Port
by cieplik206
Fri Feb 24, 2012 10:47 pm
Forum: Wireless Networking
Topic: Default forward
Replies: 2
Views: 1170

Re: Default forward

Do you use Access-list for your stations ?

If yes, check forwarding over there
by cieplik206
Sun Feb 19, 2012 6:07 pm
Forum: Forwarding Protocols
Topic: Routing mark for PPTP on same RB, and some port forward
Replies: 1
Views: 1960

Re: Routing mark for PPTP on same RB, and some port forward

Ok Mark connection first /ip firewall mangle add chain=prerouting in-interface=LAN2 action=mark-connection new-routing-mark=incoing_from_lan2 And then mark packet inside this connection and apply routing /ip firewall mangle add chain=prerouting in-interface=LAN3 connection-mark=incoming_from_lan2 ac...
by cieplik206
Sun Feb 19, 2012 6:00 pm
Forum: Forwarding Protocols
Topic: OSPF over an SXT as a bridge, not working...
Replies: 5
Views: 2906

Re: OSPF over an SXT as a bridge, not working...

please export config and paste here

USE
/interface wireless export compact
/ip address export compact
/routing ospf export compact
by cieplik206
Sun Feb 19, 2012 5:55 pm
Forum: General
Topic: RADIUS, hotspot
Replies: 4
Views: 1051

Re: RADIUS, hotspot

[admin@MikroTik] /ip hotspot host> print 
Flags: S - static, H - DHCP, D - dynamic, A - authorized, P - bypassed 
looks like IP spoofing or user changed IP manually to 192.168.1.30 an universal client feature translated it to .8.200
by cieplik206
Sun Feb 19, 2012 5:48 pm
Forum: Wireless Networking
Topic: Wireless authentication with User manager
Replies: 5
Views: 5557

Re: Wireless authentication with User manager

Correct me if I am wrong but AFAIK User-Manager does not support any EAP method

try to use freeradius instead

Or Hotspot
by cieplik206
Sun Feb 19, 2012 5:45 pm
Forum: Wireless Networking
Topic: 802.11n 1x1 vs 802.11a
Replies: 7
Views: 2279

Re: 802.11n 1x1 vs 802.11a

802.11a with NV2 = ~45mbps hdx
802.11n 1x1 NV2 = ~ 52 mbps hdx (20mhz)
by cieplik206
Fri Feb 17, 2012 12:24 am
Forum: Wireless Networking
Topic: Advice on setting up OSPF NBMA on wireless
Replies: 2
Views: 2254

Re: Advice on setting up OSPF NBMA on wireless

Hi Add your networks to network tab under OSPF and interfaces will be added dynamically based on link type. On default it will be broadcast network. Add manually interfaces ether and wireless to in interfaces tab and set type as NBMA. now you have to add neighbours manually under NBMA neighbour TAB....
by cieplik206
Sun Feb 12, 2012 11:43 am
Forum: General
Topic: 802.11n throughput problem
Replies: 12
Views: 4061

Re: 802.11n throughput problem

Roy

You will never get 200 mbps using WDS
by cieplik206
Thu Feb 09, 2012 3:01 pm
Forum: General
Topic: marking incoming connection
Replies: 2
Views: 754

Re: marking incoming connection

Using mangle: Mark connections that are incoiming on ether2 then Mark routing to packets that belongs to that connecton that are comming from your local interface create a new routing mark in /ip routes/ i.e. /ip route add destination=0.0.0.0/0 gateway=your GW of eth2 routing-mark=mark1 /ip firewall...
by cieplik206
Thu Feb 09, 2012 2:54 pm
Forum: RouterBOARD hardware
Topic: rb-411u interface missing after upgrade to v5.12
Replies: 2
Views: 859

Re: rb-411u interface missing after upgrade to v5.12

Did upgrade was performed properly ?

Chech system packages is wireless package installed
by cieplik206
Thu Feb 09, 2012 6:28 am
Forum: General
Topic: cache and load balance problem
Replies: 1
Views: 659

Re: cache and load balance problem

try chain=output for balancing rules.

Traffic that goues out from your web-proxy will never get into prerouting chain
by cieplik206
Thu Feb 09, 2012 6:21 am
Forum: Forwarding Protocols
Topic: HOTSPOT LOGIN FROM MY WEBSERVER
Replies: 1
Views: 1354

Re: HOTSPOT LOGIN FROM MY WEBSERVER

If you use simple HTTP redirect in HEAD section to other page it should work.

Do not forget to put that new remote login page into Walled garden settings
by cieplik206
Wed Feb 08, 2012 7:05 pm
Forum: Wireless Networking
Topic: wmm-support, yeah, but does it interfere?
Replies: 7
Views: 5333

Re: wmm-support, yeah, but does it interfere?

Thank you! I currently have to make a CPE script that does settings that are compatible with both 802.11, nstreme and NV2

just use

wireless-protocol = nv2-nstreme-802.11 on all your CPE's

wmm only works in 802.11 and is ignored in other proprietary protocols
by cieplik206
Wed Feb 08, 2012 7:01 pm
Forum: Wireless Networking
Topic: NV2 and RADIUS
Replies: 2
Views: 816

Re: NV2 and RADIUS

I think there is no support of that whatso ever.

NV2 ignores security profile settings if we are talking about security
by cieplik206
Fri Jan 13, 2012 11:43 pm
Forum: Wireless Networking
Topic: Mesh handover network with no latency time or no packet loss
Replies: 13
Views: 5784

Re: Mesh handover network with no latency time or no packet

Roy. Try to use HWMP in Pro-active mode. Set device that have connection to other network as MESH Portal. and use "Re-optimize paths" in your MESH interface. I have done some setup today with HWMP+ and found a huge regression in version 5.11. I've compared it to 4.17v and 4.x was working much better...
by cieplik206
Fri Jan 13, 2012 12:01 am
Forum: Wireless Networking
Topic: Mesh handover network with no latency time or no packet loss
Replies: 13
Views: 5784

Re: Mesh handover network with no latency time or no packet

And you suggest that OSPF will adopt faster to topology change then RSTP or hwmp ?
by cieplik206
Mon Dec 12, 2011 12:15 am
Forum: General
Topic: self upgrade mechanism?
Replies: 13
Views: 3500

Re: self upgrade mechanism?

You can find script for that in WIKI, I think i've seen one there
by cieplik206
Sat Dec 10, 2011 5:41 pm
Forum: Wireless Networking
Topic: Certificado (https) no hotspot V5.9
Replies: 2
Views: 2646

Re: Certificado (https) no hotspot V5.9

Hi

I've same problem, waiting to solve this issue

PC
by cieplik206
Thu Dec 08, 2011 6:29 am
Forum: General
Topic: Anyone else having a problem accessing Quickbooks Online?
Replies: 1
Views: 504

Re: Anyone else having a problem accessing Quickbooks Online

If you bypassed firewall and it worked then answer is obviously YES......

to help its neccesery to have more information.
like /ip firewall export
by cieplik206
Thu Dec 08, 2011 12:10 am
Forum: General
Topic: Strange behavior PCC Loadbalancing
Replies: 8
Views: 1822

Re: Strange behavior PCC Loadbalancing

please paste your firewall config here and routing table
by cieplik206
Thu Dec 08, 2011 12:09 am
Forum: Wireless Networking
Topic: 2 APs extending network coverage - help
Replies: 1
Views: 626

Re: 2 APs extending network coverage - help

This can work on one card,

try this one

http://wiki.mikrotik.com/wiki/Transpare ... o_Networks

instead of AP-STATION where will AP-AP both connecting using WDS
by cieplik206
Thu Dec 08, 2011 12:05 am
Forum: Wireless Networking
Topic: Mixing Single and Dual Chain Clients on the same AP?
Replies: 1
Views: 803

Re: Mixing Single and Dual Chain Clients on the same AP?

Well

example

your dual chain client has to spend 1s to transmit same aount of data as 2s single chain client.


Single chain client will slow overal maximum throuput, but dual chain clients will still work
by cieplik206
Thu Dec 08, 2011 12:02 am
Forum: Wireless Networking
Topic: RB751U-2HnD weak wifi
Replies: 23
Views: 9620

Re: RB751U-2HnD weak wifi

there is default security profile, and you said AES,

just a note (on TKIP 11.n doesnt work well)

try to use "advanced" rate selection algoritm and redo test
by cieplik206
Wed Dec 07, 2011 11:59 pm
Forum: Wireless Networking
Topic: RB751U-2HnD weak wifi
Replies: 23
Views: 9620

Re: RB751U-2HnD weak wifi

looks like signal can allow you upto 88mbps,

Do you have fast and reliable speedtest.net server ?
by cieplik206
Wed Dec 07, 2011 9:59 pm
Forum: General
Topic: user manager questions
Replies: 3
Views: 780

Re: user manager questions

Subscriber is owner of routers and users.

Another subscriber has another routers and users


Customer is admin account that belongs to subscriber.

1 Subscriber can have multiple customers

http://wiki.mikrotik.com/wiki/User_Manager/Customers
by cieplik206
Wed Dec 07, 2011 9:55 pm
Forum: Wireless Networking
Topic: Very Very strange issue on the wireless interface...
Replies: 3
Views: 725

Re: Very Very strange issue on the wireless interface...

ot enough information, next time catch ports and explain what is adress that starts at 27.x.x.x
by cieplik206
Mon Dec 05, 2011 11:05 pm
Forum: Wireless Networking
Topic: hi all i need help urgent please
Replies: 1
Views: 550

Re: hi all i need help urgent please

If you need a consultant you can contact me on skype: cieplik206
by cieplik206
Sat Nov 26, 2011 10:59 am
Forum: Wireless Networking
Topic: can it be better then this?
Replies: 2
Views: 800

Re: can it be better then this?

and what are station settings ?
by cieplik206
Fri Nov 25, 2011 10:54 pm
Forum: Wireless Networking
Topic: Transparent bridge without wds
Replies: 17
Views: 8943

Re: Transparent bridge without wds

Use on AP ap/bridge
and on STA -> station bridge

this should work for you
by cieplik206
Fri Nov 25, 2011 10:51 pm
Forum: Scripting
Topic: Advanced speed limit - queue [Q]
Replies: 1
Views: 1531

Re: Advanced speed limit - queue [Q]

I want to make a script when network bandwith is under 10M, so set for me max limit on 100M
Go look for Traffic Monitor

http://wiki.mikrotik.com/wiki/Manual:To ... ic_Monitor
by cieplik206
Fri Nov 25, 2011 10:43 pm
Forum: Scripting
Topic: send a command to router OS and show reply on the html form
Replies: 5
Views: 1690

Re: send a command to router OS and show reply on the html f

Use api or SSH with DSA key
by cieplik206
Fri Nov 25, 2011 10:41 pm
Forum: Scripting
Topic: What wrong with script
Replies: 4
Views: 1405

Re: What wrong with script

try this: :if ([/ping 8.8.8.8 count=5]=0) do={ :log info ("WatchDog connection Failed"); /interface ppp-client disable 3g-intertelecom-1; :delay 5s; /interface ppp-client enable 3g-intertelecom-1; :if ([/ping 8.8.8.8 count=5] = 0) do={ /system reboot; } } else={ :log info ("WatchDog connection OK");...
by cieplik206
Fri Nov 25, 2011 12:17 pm
Forum: Wireless Networking
Topic: no security profile in winbox....
Replies: 2
Views: 1430

Re: no security profile in winbox....

There is not, never was nad never will be Security profile in interface configuration....

On left menu there is WIRLESS button. Click on it and you will see new window.

Securoty profile is last one there
by cieplik206
Thu Nov 24, 2011 12:00 am
Forum: Wireless Networking
Topic: All wireless network going to hang plz help me out
Replies: 6
Views: 1847

Re: All wireless network going to hang plz help me out

Not enough information but it looks like if your customers start generate traffic probelms starts

It can be "hidden node issue for examle"
by cieplik206
Wed Nov 23, 2011 1:02 pm
Forum: General
Topic: Queue Management in Mikrotik
Replies: 1
Views: 1685

Re: Queue Management in Mikrotik

go to WIKI and search BURSTS
by cieplik206
Wed Nov 23, 2011 12:25 am
Forum: General
Topic: CITY FOR NEXT EUROPEAN MUM 2012
Replies: 49
Views: 7836

Re: CITY FOR NEXT EUROPEAN MUM 2012

Lets come to Katowice.


Cheap, Airport

Nothing really interesting in the city so people will focus on presentations and event :P


South germany seems OK.
Slovakia ? Bratislava ?
Ostrava in CZ ?
other city in Poland ? Warsaw, Gdansk ?
or Kiev Ukraine ?
by cieplik206
Wed Nov 23, 2011 12:08 am
Forum: General
Topic: map mesh on Dude
Replies: 1
Views: 474

Re: map mesh on Dude

I think only way is to use static mesh interfaces and draw map manually forself
by cieplik206
Wed Nov 23, 2011 12:02 am
Forum: Wireless Networking
Topic: How many clients can connect to a MikroTik??
Replies: 15
Views: 3941

Re: How many clients can connect to a MikroTik??

Nobody mention a wireless medium access protocol 802.11, nstreme or nv2 ?????? I've seen 70 clients connected using nstreme and was working fine. Also connection 2 clients that cant "see" each other on pure 802.11 and have a hidden node issue - with large traffic lot of packet loss can occur. Number...
by cieplik206
Tue Nov 22, 2011 11:56 pm
Forum: Wireless Networking
Topic: RB1200 and 3 RB433APS - High Latency Pings / Unusable setup
Replies: 1
Views: 1027

Re: RB1200 and 3 RB433APS - High Latency Pings / Unusable se

David You said you bridged eth1 to managment vlan ? why ? Also how do you create vlans on RB1200 using add vlan interface or using switch chip funtionality ? Also on RB433 please add eth2 to bridge where hotspot vlan exist and check is it problem with wireless or else. Also on that bridge go to brid...
by cieplik206
Mon Nov 21, 2011 11:36 pm
Forum: Beginner Basics
Topic: Webfig - customize Firewall headlines like Action, Chain etc
Replies: 2
Views: 952

Re: Webfig - customize Firewall headlines like Action, Chain

Maybe you should upgrade your routerboard

I can see those fields on my RB with 5.8
by cieplik206
Mon Nov 21, 2011 11:34 pm
Forum: Wireless Networking
Topic: need your support
Replies: 24
Views: 2431

Re: need your support

Looks loke you second antenna or pigtail or card is broken
by cieplik206
Mon Nov 21, 2011 11:26 pm
Forum: General
Topic: Lost SNMP and routeros reporting in DUDE after upgrade
Replies: 2
Views: 717

Re: Lost SNMP and routeros reporting in DUDE after upgrade

Its working in My DUDE, double check community, mode
by cieplik206
Mon Nov 21, 2011 11:24 pm
Forum: Wireless Networking
Topic: upgrade dual-nstreme
Replies: 8
Views: 1672

Re: upgrade dual-nstreme

and you are using by that 40mhz channel and roughly have 108 mbps

While using N you can have on same channel width 300 mbps


So where is more speed come from ?
by cieplik206
Mon Nov 21, 2011 11:19 pm
Forum: Wireless Networking
Topic: HWMP+ Mesh questions. Can't get the mesh to bridge traffic
Replies: 7
Views: 1283

Re: HWMP+ Mesh questions. Can't get the mesh to bridge tra

Yes it is in English indeed,

Language is on training schedule, Forgot to put it into PDF

Do you want to join as well ?
by cieplik206
Mon Nov 21, 2011 11:18 pm
Forum: General
Topic: Some assistence needed in selecting correct equipment.
Replies: 7
Views: 1268

Re: Some assistence needed in selecting correct equipment.

How many throughtput you expect at each tower ?

How many PPPoE sessions do you expect at each tower ?

PC
by cieplik206
Sun Nov 20, 2011 9:47 pm
Forum: Wireless Networking
Topic: HWMP+ Mesh questions. Can't get the mesh to bridge traffic
Replies: 7
Views: 1283

Re: HWMP+ Mesh questions. Can't get the mesh to bridge tra

Its not that we keep to our chest,

I would like to help wy reproducing this problem, but believe I do not have much time recently

Is there a way to get remote access to your devices ?

PC
by cieplik206
Sun Nov 20, 2011 9:41 pm
Forum: Wireless Networking
Topic: best solution for 4 floor bulding
Replies: 2
Views: 706

Re: best solution for 4 floor bulding

Hi Reza If you want to put AP outside the building to cover interior, this aprroach is not good becouse walls and windows will prevent you to get goot signal coverage inside. I would do it by installing multiple access points inside. Number of devices depends on signal propagation inside (what walls...
by cieplik206
Sat Nov 19, 2011 12:35 pm
Forum: Wireless Networking
Topic: AP + Station on the same router board
Replies: 1
Views: 685

Re: AP + Station on the same router board

Single radio will not support AP and STA at same time.

Yes two radio cards operating on same frequecy are affecting each other (sharing same medium), but if it will definietly work better then 3G network.
by cieplik206
Sat Nov 19, 2011 12:31 pm
Forum: General
Topic: Some assistence needed in selecting correct equipment.
Replies: 7
Views: 1268

Re: Some assistence needed in selecting correct equipment.

How many ethernet port will you need ?

What throuput you are expecing going throu ?
by cieplik206
Sat Nov 19, 2011 12:31 am
Forum: General
Topic: Some assistence needed in selecting correct equipment.
Replies: 7
Views: 1268

Re: Some assistence needed in selecting correct equipment.

Hi Luke,

equipment varies on many factors,

If you are interested on paid consultancy, I am willing to help you

Pawel
by cieplik206
Sat Nov 19, 2011 12:15 am
Forum: Wireless Networking
Topic: upgrade dual-nstreme
Replies: 8
Views: 1672

Re: upgrade dual-nstreme

Are you sure its more speed ?
by cieplik206
Sat Nov 19, 2011 12:14 am
Forum: General
Topic: Landing page not working from WAN
Replies: 4
Views: 1463

Re: Landing page not working from WAN

seem to be ok and same on both ,

Do you have any other equipment routers that are diffrent on both locations ? maybe they bloch access to www on RB
by cieplik206
Fri Nov 18, 2011 2:12 pm
Forum: Wireless Networking
Topic: HWMP+ Mesh questions. Can't get the mesh to bridge traffic
Replies: 7
Views: 1283

Re: HWMP+ Mesh questions. Can't get the mesh to bridge tra

kmullen,

contact me on skype: cieplik206, i can help you with that,

Pawel
by cieplik206
Fri Nov 18, 2011 2:06 pm
Forum: General
Topic: Is WebFix for mobile planned?
Replies: 2
Views: 657

Re: Is WebFix for mobile planned?

Why would you need that ?

on My HTC its working fine
by cieplik206
Fri Nov 18, 2011 2:01 pm
Forum: Wireless Networking
Topic: Wat mode is best for me?
Replies: 1
Views: 595

Re: Wat mode is best for me?

To build transparent network you have to setup 1. AP/Bridge mode on AP 2. Station bridge mode on STA 3. band 5ghz-a/n on all devices 4. Wireless protocol: nv2-nstreme-802.11 on STA 5. on AP can test nv2 or nstreme or 802.11 which one works better for you if neded more help I can offer you paid proff...
by cieplik206
Fri Nov 18, 2011 1:53 pm
Forum: General
Topic: Landing page not working from WAN
Replies: 4
Views: 1463

Re: Landing page not working from WAN

Hi there,

Plese post export config from 2 devices, one that work and one that does not

/ip hotspot export
/ip service export
/ip firewall filter export

Pawel
by cieplik206
Thu Nov 17, 2011 12:58 am
Forum: General
Topic: mikrotik -> mikrotik pptp problem
Replies: 8
Views: 11609

Re: mikrotik -> mikrotik pptp problem

In fact there is a that feature already

It is called NAT helper

In fact in my network i have two sessions of PPTP behind nat,
by cieplik206
Thu Nov 17, 2011 12:54 am
Forum: Beginner Basics
Topic: Winbox vs. Webfig
Replies: 10
Views: 7940

Re: Winbox vs. Webfig

And you dont have to run HTTP server to configure device
by cieplik206
Thu Nov 17, 2011 12:52 am
Forum: Wireless Networking
Topic: upgrade dual-nstreme
Replies: 8
Views: 1672

Re: upgrade dual-nstreme

Best will be B

if you have good signal to other end you should be able to send 90/90 mbps full duplex while in dual nstreme you have only 36 something
by cieplik206
Tue Nov 15, 2011 11:12 pm
Forum: Wireless Networking
Topic: Band Steering AP (no wan controller)
Replies: 1
Views: 808

Re: Band Steering AP (no wan controller)

I dont think that somethin like that exist, Once I used a Meru Networks but controler for it cost alot
by cieplik206
Tue Nov 15, 2011 11:01 pm
Forum: Wireless Networking
Topic: HotSpot for 2000 users
Replies: 2
Views: 1782

Re: HotSpot for 2000 users

Hi, I have a deployed many of hotspots all around, if needed you could consult your project.

Pawel
by cieplik206
Tue Nov 15, 2011 10:56 pm
Forum: Wireless Networking
Topic: Real Life Nv2 RouterOS 5.9
Replies: 20
Views: 6509

Re: Real Life Nv2 RouterOS 5.9

pretty good results indeed,

where do you get v5.9 From, did MT support mailed it to you ?
by cieplik206
Tue Nov 15, 2011 10:53 pm
Forum: Wireless Networking
Topic: station-pseudobridge replacement?
Replies: 4
Views: 1168

Re: station-pseudobridge replacement?

I understand, only way to avoid mac spoofing is a static ARP on a next L3 device, Do you use DHCP with static leases ? If yes then DHCP server can automatically set static ARP entry, If not you have to do it manually yourself thinking.... pseudobridge is doing nothing esle then MAC-SRC-NAT istn't ??...
by cieplik206
Tue Nov 15, 2011 10:43 pm
Forum: Wireless Networking
Topic: RB711UA-2HnD as ap?
Replies: 1
Views: 1133

Re: RB711UA-2HnD as ap?

not this one but 5ghz alternative - works pretty well i have to say
by cieplik206
Tue Nov 15, 2011 10:35 pm
Forum: General
Topic: mikrotik -> mikrotik pptp problem
Replies: 8
Views: 11609

Re: mikrotik -> mikrotik pptp problem

Are you blocking in forward chain any traffic somehow ?
by cieplik206
Tue Nov 15, 2011 4:20 pm
Forum: General
Topic: Optimal way to connect to other MT device tunneling
Replies: 2
Views: 734

Re: Optimal way to connect to other MT device tunneling

The only way is tunneling if you want to send VLANs over,

I suggest to you use EoIP tunnel and if needed uses IPsec to encrypt it, it should work,

Remeber to decrease mss becouse lower MTU on Tunnel will couse you problems.
by cieplik206
Tue Nov 15, 2011 4:10 pm
Forum: General
Topic: DNS-based routing?
Replies: 8
Views: 3231

Re: DNS-based routing?

root@alpha:/var/log/apache2# dig www.pandora.com ; <<>> DiG 9.7.3 <<>> www.pandora.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 49685 ;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 13, ADDITIONAL: 0 ;; QUESTION SECTION: ;www.pandora.com. IN A ;;...
by cieplik206
Tue Nov 15, 2011 4:05 pm
Forum: Wireless Networking
Topic: MIKROTIK WISP Backbone
Replies: 6
Views: 3130

Re: MIKROTIK WISP Backbone

It was for other company, I do not have remote access to it, hardy to recover locations,

It was hilly area in Ireland, south of Dublin, Line of sight, signal was around -67 both ways.
by cieplik206
Tue Nov 15, 2011 1:59 pm
Forum: Wireless Networking
Topic: MIKROTIK WISP Backbone
Replies: 6
Views: 3130

Re: MIKROTIK WISP Backbone

I was doing a 40 km link using NV2, MIMO

RB411AH + UBNT SR71-15 + Rocketdish 32 dBi antenna

was achieving 90/90 mbps
by cieplik206
Tue Nov 15, 2011 1:11 pm
Forum: General
Topic: mikrotik -> mikrotik pptp problem
Replies: 8
Views: 11609

Re: mikrotik -> mikrotik pptp problem

Looks like NAT problem, maybe you will establish PPTP directly from mikrotik ?
by cieplik206
Tue Nov 15, 2011 1:09 pm
Forum: Wireless Networking
Topic: using rb411uahr with sim card to do a vpn?
Replies: 2
Views: 737

Re: using rb411uahr with sim card to do a vpn?

What do you mean by VPN, establish a secure tunnel from RB411 to some place in the world, if so then answer is yes you can choose from PPTP, IPSEC, SSTP,
by cieplik206
Tue Nov 15, 2011 1:05 pm
Forum: Wireless Networking
Topic: 16 km link
Replies: 19
Views: 2596

Re: 16 km link

What tehre can be added.

calculated should be -63, please have in mind that radio signal always fluctuate, but even if it will drop down to -69 you will still be able to decode maximum modulation.

What is your bandwidth expectations / need ?
by cieplik206
Tue Nov 15, 2011 12:06 am
Forum: General
Topic: why mangle rure doesn't process traffic?
Replies: 2
Views: 618

Re: why mangle rure doesn't process traffic?

/ip firewall mangle print
0 chain=prerouting action=mark-routing new-routing-mark=viaIDSL
passthrough=no src-address=10.8.4.36 routing-mark=viaIDSL

look above on red color and you will know where problem was !

HINT: you looking for something you did not set yet
by cieplik206
Tue Nov 15, 2011 12:02 am
Forum: General
Topic: Address List doesn't work if network address is specified
Replies: 10
Views: 1139

Re: Address List doesn't work if network address is specifie

Working on my 5.8 Router
by cieplik206
Mon Nov 14, 2011 11:55 pm
Forum: General
Topic: opening ports, cant get it working
Replies: 20
Views: 1404

Re: opening ports, cant get it working

and where are DST-NAT rules ?
by cieplik206
Mon Nov 14, 2011 11:29 pm
Forum: Wireless Networking
Topic: data rate/signal strength
Replies: 5
Views: 1698

Re: data rate/signal strength

If you load more in a car to go with same speed you need more power in engine (higher gain antenna or more powerfull radio card). If your radio card will be transmiting with higher modulation (data rate) your amplifier cannot be that accurate so output power decreeses. on reciever side you need more...
by cieplik206
Mon Nov 14, 2011 11:25 pm
Forum: Wireless Networking
Topic: station-pseudobridge replacement?
Replies: 4
Views: 1168

Re: station-pseudobridge replacement?

is it used as a CPE ?

if yes, why are you bridging, maybe your mikrotik box will be a router ??
by cieplik206
Mon Nov 14, 2011 11:24 pm
Forum: General
Topic: problem with configuration
Replies: 2
Views: 511

Re: problem with configuration

You want to balance loan over two connections or do a use anotehr ISP as a failover,

please explain in more detail

Pawel
by cieplik206
Mon Nov 14, 2011 11:19 pm
Forum: General
Topic: opening ports, cant get it working
Replies: 20
Views: 1404

Re: opening ports, cant get it working

Hi

in terminal do a:
/ip firewall nat export
and place output here
by cieplik206
Mon Nov 14, 2011 7:05 pm
Forum: General
Topic: Rate Limit on VLAN interface
Replies: 3
Views: 1940

Re: Rate Limit on VLAN interface

Did you tried it ?


/queue tree add  disabled=no limit-at=0 max-limit=2M name=queue-vlan packet-mark=no-mark parent=vlan1 priority=8 queue=default
by cieplik206
Mon Nov 14, 2011 6:49 pm
Forum: General
Topic: RB1200 and Linux OpenVPN Server issue.
Replies: 3
Views: 765

Re: RB1200 and OpenVPN Server issue.

No same issues, but if its a MTU problem you can force smaller MTU on TCP connection

to do that action "change MSS" is used for.

for examlpe
/ip firewall mangle add action=change-mss chain=postrouting disabled=no new-mss=1459 passthrough=yes protocol=tcp tcp-flags=syn tcp-mss=1460-65535
by cieplik206
Thu Oct 27, 2011 3:17 pm
Forum: General
Topic: who wants some small MT consulting work? :)
Replies: 1
Views: 661

Re: who wants some small MT consulting work? :)

I can help you if you truggle with mikrotik

contact me on pawel[at]cieplinski.pl if you need to solve your problems

Pawel
by cieplik206
Fri Oct 07, 2011 4:10 pm
Forum: General
Topic: mum vouchers
Replies: 0
Views: 457

mum vouchers

I have few vouchers to give away to MUM in LV, anyone interested ?

PC
by cieplik206
Wed Sep 14, 2011 9:07 am
Forum: General
Topic: Load Balancing?
Replies: 7
Views: 1171

Re: Load Balancing?

No its wrong

please read this:

http://wiki.mikrotik.com/wiki/Manual:PCC
by cieplik206
Mon Aug 08, 2011 12:59 pm
Forum: General
Topic: Uptime left.
Replies: 1
Views: 1000

Re: Uptime left.

use $(session-time-left) variable in HTML page

Pawel
by cieplik206
Mon Aug 08, 2011 12:51 pm
Forum: General
Topic: Management VLAN over WIFI/MESH
Replies: 6
Views: 2637

Re: Management VLAN over WIFI/MESH

Hello Simple... wlan interface is not port of mesh network. so simple add a vlan interfaces either vlan5 and vlan2 with master interface hwmp-bridge. add managment ip address to vlan5 interface add additional bridge - call it hotspot-bridge add two ports to that bridge vlan2 and wlan1 on Node A add ...
by cieplik206
Wed Jun 29, 2011 9:57 am
Forum: Scripting
Topic: radius incoming
Replies: 1
Views: 866

radius incoming

Hello I succesfuly used freeradius in many deployments but never had need of using radius incoming feature. I know that radclient is a tool to send packets to MT but i cannot image an overall picture. NAS get info from Radius server and get Accept with for example rx/tx rate. I would like to change ...
by cieplik206
Fri Jun 03, 2011 1:33 pm
Forum: Wireless Networking
Topic: Masquerade two networks
Replies: 1
Views: 514

Re: Masquerade two networks

No idea what you need. please be more descriptive
by cieplik206
Fri Jun 03, 2011 1:32 pm
Forum: Wireless Networking
Topic: Mikrotik bandwidth test software; using iperf?
Replies: 21
Views: 35998

Re: Mikrotik bandwidth test software; using iperf?

Guys To get information about link quality you have fields like: CCQ P Throuput diffrence between Frames and HW Frames. You can tell straight away from those values is link ok or not. If you want to compare madwifi client and routeros client what is problem in building test network ? nevertheless in...
by cieplik206
Wed May 18, 2011 11:25 am
Forum: Scripting
Topic: Upgrade to 5.x causes 100% cpu with hotspot
Replies: 3
Views: 1251

Re: Upgrade to 5.x causes 100% cpu with hotspot

Use profiler in tool menu to validate what service utilizes CPU
by cieplik206
Wed May 18, 2011 11:23 am
Forum: Wireless Networking
Topic: Routing issues
Replies: 18
Views: 1435

Re: Routing issues

joshi,

please paste your routing table, ip addresess, and intefaces.

also information from where to where you are not able to connect to.
by cieplik206
Fri Apr 08, 2011 11:10 am
Forum: Scripting
Topic: Script to telnet into another router
Replies: 5
Views: 3175

Re: Script to telnet into another router

that cannot be done using scripting. you could try some external box with expect scripting.
Sorry for offtopic janis but did you have a template for expect that works well with colors in termina in RouterOS ? or how to disable colors ?
by cieplik206
Fri Apr 08, 2011 11:07 am
Forum: General
Topic: TCP artificial delay
Replies: 1
Views: 547

Re: TCP artificial delay

No there is not...
by cieplik206
Mon Apr 04, 2011 1:20 pm
Forum: General
Topic: What is the right conf RB433Ah?
Replies: 1
Views: 398

Re: What is the right conf RB433Ah?

there are multiple diffrent ways.. and best way depends on many factors.

Read WIKI. your problem is explain there very well.
by cieplik206
Thu Mar 31, 2011 9:44 am
Forum: Beginner Basics
Topic: PPTP VPN Connection that can see two subnets
Replies: 2
Views: 714

Re: PPTP VPN Connection that can see two subnets

What about default gateway on client to pass throu all traffin on vpn, in this case you do not need to have specific route on client.
by cieplik206
Thu Mar 31, 2011 9:38 am
Forum: General
Topic: Urgent, mission impossible, help!
Replies: 3
Views: 823

Re: Urgent, mission impossible, help!

Gate way it not on diffrent subnet. Have in mind it is PPP which is completly classless so there are no subnets.

and this address is unreachable from Mikrotik box or from machine behind it ?
by cieplik206
Wed Mar 16, 2011 11:33 am
Forum: The User Manager
Topic: User-manager and SP300e Thermal Printer entegrasyon
Replies: 3
Views: 2015

Re: User-manager and SP300e Thermal Printer entegrasyon

Arges.... maybe Mikrotik Hotspot Printer.... we showed it at mum... link is below
by cieplik206
Wed Mar 16, 2011 11:31 am
Forum: Forwarding Protocols
Topic: Routing 2 ADSL
Replies: 5
Views: 1196

Re: Routing 2 ADSL

by cieplik206
Tue Mar 08, 2011 4:40 pm
Forum: General
Topic: Another good reason to come to MUM in Budapest
Replies: 2
Views: 1615

Re: Another good reason to come to MUM in Budapest

: D!
How to inteprete it ;) ?

See you in MUM everyone. :)
by cieplik206
Mon Mar 07, 2011 12:52 pm
Forum: General
Topic: Bandwidth limitation upload & download
Replies: 2
Views: 815

Re: Bandwidth limitation upload & download

1. Can I limit download bandwidth with queue trees as well? Or does the download limits only work with simple queues? I don't need to prioritize within a simple queue yet. What are the advantages / disadvantages of simple queues under these circumstances? Its better not to mix Simple queue and queu...
by cieplik206
Mon Mar 07, 2011 9:28 am
Forum: General
Topic: Another good reason to come to MUM in Budapest
Replies: 2
Views: 1615

Another good reason to come to MUM in Budapest

Hello. We will show first time on MUM new solution for ticket printing for Mikrotik HotSpots. http://www.youtube.com/watch?v=OevXF3Ai1gA First integrated device for ticket generation and print out that works with User-Manager. If you want to see it live or get more information please come to Budapes...
by cieplik206
Thu Mar 03, 2011 12:46 pm
Forum: Scripting
Topic: Clients signal strenght/ccq into remote linux SQL server?
Replies: 2
Views: 1164

Re: Clients signal strenght/ccq into remote linux SQL server

Hi there For NON-API solution i think you can locally save registration table and fetch it from Router using SCP/FTP to a server and parse it to put into database. Saving file: [admin@Technologic] /interface wireless registration-table> print stats file=stats File content: # jan/ 3/1970 2:48:48 by R...
by cieplik206
Thu Jan 13, 2011 3:01 pm
Forum: Wireless Networking
Topic: No VirtualAP in Station/Client mode=LAME
Replies: 8
Views: 1810

Re: No VirtualAP in Station/Client mode=LAME

no you are wrong, WDS is clearly defined as a mode in ddwrt, repeater mode has nothing to do with WDS

Is communication TRANSPARENT in Layer2 ??? or this so called "repeater" is hidding your MAC address ?
by cieplik206
Wed Jan 12, 2011 4:57 pm
Forum: Wireless Networking
Topic: WiMAX CPE
Replies: 1
Views: 844

Re: WiMAX CPE

Using RouterOS its not possible.

I've used a WiNetworks USB CPE on Alix based debian not RouterBoard.

if you want to make it work find a vendor of a card that provide a linux drivers... not sure maybe even on OpenWRT it could work.... ask on OpenWRT forum.
by cieplik206
Tue Jan 11, 2011 10:40 am
Forum: Wireless Networking
Topic: No VirtualAP in Station/Client mode=LAME
Replies: 8
Views: 1810

Re: No VirtualAP in Station/Client mode=LAME

It is possible in MadWIFI but in certain circumstances. even if you run it Card have to switch from Master to Managed mode in few us, and i believe overall performance of it is very poor. Why do you need that feature anyway ? get yourself a new router or additional radio card. IMHO mikrotik drivers ...
by cieplik206
Thu Dec 09, 2010 11:36 am
Forum: Wireless Networking
Topic: Big differences with nstreme
Replies: 5
Views: 1439

Re: Big differences with nstreme

try aes encryption instead of psk. aes is hardware encryption while psk is software encryption. making aes more efficient. You can also try specifying appropriate frequencies in a scan list, which will shorten the reconnect delay. PSK is not encryption but authentication method. encryption: AES or ...
by cieplik206
Thu Dec 09, 2010 9:31 am
Forum: Wireless Networking
Topic: I want Wireless AP sync. TDD or FDD with TDMA NV2
Replies: 90
Views: 17117

Re: I want Wireless AP sync.

Explain me in few sentences how it might work? AP would need a GPS to get correct time for synchronization, and a protocol beetween each other to talk to and arrange time slots when they have to be silent. How would you resolve issue with time drift ? Its hard to imageine - set exact time on diffren...
by cieplik206
Fri Nov 05, 2010 1:53 pm
Forum: General
Topic: Anybody coming to MUM Brazil / Columbia ?
Replies: 7
Views: 2339

Re: Anybody coming to MUM Brazil / Columbia ?

I live in Salvador / Bahia - Brazil :D Be prepared for the hot sun! its been pretty hot here :) avarage 30degree Celsius! As Normis said, everyplace have unsafe areas. The Hotel where Mum is going to happen is pretty good and in a good location! Where is the sun ??? Forecast shows rain all the time...
by cieplik206
Wed Oct 27, 2010 1:36 pm
Forum: Wireless Networking
Topic: LAN user isolation
Replies: 4
Views: 2407

Re: LAN user isolation

Kishore Well there are several type of communication in network you would like to build. One is WiFi station to station communication -> can be turned off, if you want to use MT as AP device you can switch that off by swithing off option "default forwarding". two is staion of one AP to another stati...
by cieplik206
Tue Oct 26, 2010 11:02 am
Forum: Wireless Networking
Topic: Ping
Replies: 5
Views: 1123

Re: Ping

Have you configured masquarade ?

If yes and its still not working copy and paste config here,
by cieplik206
Mon Oct 25, 2010 10:22 am
Forum: General
Topic: Time off for wireles
Replies: 3
Views: 678

Re: Time off for wireles

You can use scheduler:
/system scheduler add name="If_ff" start-date=jan/01/1970 start-time=00:00 interval=1d on-event="/interface wireless disable wlan1"
/system scheduler add name="If_on" start-date=jan/01/1970 start-time=05:00 interval=1d on-event="/interface wireless enable wlan1"

by cieplik206
Fri Oct 22, 2010 4:32 pm
Forum: Wireless Networking
Topic: Conectivity to a boat
Replies: 4
Views: 1050

Re: Conectivity to a boat

How fast CAR/BOAT will travel. Have in mind that in 802.11 STA moving faster than 3-5 km/h (walking speed) will couse packet loss.

EDIT:

What application are you want to use ? what are traffic demands ? I dont understand do you need to exchange data or use it for radiolocation ?
by cieplik206
Fri Oct 22, 2010 1:53 pm
Forum: General
Topic: limit number of connections
Replies: 9
Views: 1910

Re: limit number of connections

Guys Download accelerators are not an evil.... use fair traffic per user and i dont think you will have problems with it
by cieplik206
Fri Oct 22, 2010 12:31 pm
Forum: General
Topic: limit number of connections
Replies: 9
Views: 1910

Re: limit number of connections

you limit connection to 1 to a web serwer. A typical web browser opens several connections downloading HTML and pictures is separe connections, how would you solve this issue when limiting connection to 1 per HOST ?


?
by cieplik206
Thu Oct 21, 2010 10:34 am
Forum: Wireless Networking
Topic: couldn't make bandwidth test
Replies: 4
Views: 1072

Re: couldn't make bandwidth test

Also remember not to use the RB411s used for the link as the bandwidth client and server. Creating and terminating packets is very different from forwarding them. Put another router or computer behind each 411 and run the test between those. fewi is right. one of primary testing rules is: Never tes...
by cieplik206
Wed Oct 20, 2010 3:23 pm
Forum: General
Topic: ER: Stoping all DOWNLOAD
Replies: 3
Views: 627

Re: ER: Stoping all DOWNLOAD

Maybe a simple PCQ solution would work for you - this will not limit download but provide a fair access for all users
by cieplik206
Wed Oct 20, 2010 1:36 pm
Forum: Wireless Networking
Topic: couldn't make bandwidth test
Replies: 4
Views: 1072

Re: couldn't make bandwidth test

post settings of your bandwith-test server and client.

I usualy make mistake and forgot to type in username and password in BT client
by cieplik206
Wed Oct 20, 2010 12:07 pm
Forum: General
Topic: How do? Two separate connections on a single router
Replies: 4
Views: 1015

Re: How do? Two separate connections on a single router

No. not on a switch. but if you have your trasparent traffic shaper on MT MT----[ethernet]------Switch. you can create vlan interfaces on MT and use trunk port from swith. in this case you will have separate logica interfaces on MT ( 1 for wifi network, and 1 for cable network). So it will bea easie...
by cieplik206
Wed Oct 20, 2010 10:36 am
Forum: General
Topic: How do? Two separate connections on a single router
Replies: 4
Views: 1015

Re: How do? Two separate connections on a single router

Do use Vlans between your Traffic shaper and switch on local lan ?


If so.... try to put your queue tree on vlan interfaces
by cieplik206
Wed Oct 20, 2010 10:33 am
Forum: General
Topic: a way better than EOIP
Replies: 5
Views: 811

Re: a way better than EOIP

if its a must that users need to connect to main office, than there is no much field to choose. other option is to use MPLS-VPLS, but if traffic goes only to one destination, it will be overengineering using MPLS.

What is wrong with EoIP that you are planning to change ?
by cieplik206
Wed Oct 20, 2010 10:24 am
Forum: Beginner Basics
Topic: Need setup for small network
Replies: 1
Views: 635

Re: Need setup for small network

Use hotspot feature to do. It will best suit this role.
by cieplik206
Wed Oct 20, 2010 10:20 am
Forum: General
Topic: Not connecting to Hyper terminal
Replies: 1
Views: 785

Re: Not connecting to Hyper terminal

You are not installing firmware using xmodem... Use netinstall to do it http://wiki.mikrotik.com/wiki/Manual:Netinstall
by cieplik206
Wed Oct 20, 2010 10:17 am
Forum: Wireless Networking
Topic: Mikrotik Wireless 5G Link Problem
Replies: 2
Views: 881

Re: Mikrotik Wireless 5G Link Problem

You are saying that you have a packet loss when pushing throu traffic near max capacity ? If so ... it is normal. Ping is nothing else than traffic on you network. and if you use TCP protocol to send traffic, this protocol will increase its speed until packet loss will occur. if you need ping going ...
by cieplik206
Wed Oct 20, 2010 10:12 am
Forum: General
Topic: voip terrible sound
Replies: 1
Views: 607

Re: voip terrible sound

Well.

VoWIFI is a huge topic.... first forget about pure 802.11 infrastructure. do you use nstreme on your link ? if no use it.
by cieplik206
Wed Oct 20, 2010 10:09 am
Forum: General
Topic: Link Issues
Replies: 2
Views: 627

Re: Link Issues

usually after a heavy rain you can have bad performance due to the fact that water or moisture will get to you antena/cable/device. throughput values are usually meaningless. tell us values of radio signals, noise, and CCQ values. you can find in it /interface wireless registration-table did you had...
by cieplik206
Wed Oct 20, 2010 10:05 am
Forum: General
Topic: Limit Download From internet on mikrotik
Replies: 5
Views: 1268

Re: Limit Download From internet on mikrotik

have you read the wiki ?

start at this :

http://wiki.mikrotik.com/wiki/Manual:Qu ... Q_Examples

ant this:

http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ

that will do the job.
by cieplik206
Mon Oct 18, 2010 12:15 pm
Forum: General
Topic: Where Europe MUM'11 will TakePlace?SOLVED.10-11marchBudapest
Replies: 64
Views: 9609

Re: Where Europe MUM'11 will take place?

I've got one point to MUM organizers. Wherever you will organize MUM next year could you please do not do it in same time when CeBit is ?

CeBIT 2011 will be 1-5 March.

I hope there are more people than just me who wants visit both events.
by cieplik206
Thu Oct 14, 2010 4:35 pm
Forum: General
Topic: Anybody coming to MUM Brazil / Columbia ?
Replies: 7
Views: 2339

Re: Anybody coming to MUM Brazil / Columbia ?

Be prepared for the hot sun! its been pretty hot here :) avarage 30degree Celsius!
We looking forward to it, its getting quite cold at our part of the world :)
by cieplik206
Thu Oct 14, 2010 2:47 pm
Forum: General
Topic: Anybody coming to MUM Brazil / Columbia ?
Replies: 7
Views: 2339

Re: Anybody coming to MUM Brazil / Columbia ?

We are planning to do it today / tommorow USD is comming down in last 3 days i hope prices will change as well. Normis you have been in South america already, could you please say something about safety over there ? or maybe our collegues from South America participate as well. Due to the fact I've ...
by cieplik206
Thu Oct 14, 2010 2:37 pm
Forum: General
Topic: Anybody coming to MUM Brazil / Columbia ?
Replies: 7
Views: 2339

Anybody coming to MUM Brazil / Columbia ?

Anybody from here coming to Brazilian or Colombian MUM?
by cieplik206
Thu Oct 14, 2010 9:24 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 307420

Re: 802.11n

ping on idle link 3X !!!!!! higher 3-4 ms on idle link, on 4.6 firmware we have stable ~1ms link, Throughput and CCQ in separate issue than PING. All of you be aware that frames in NV2 are time-based (2ms default) so if you send a echo request reply could be replied in next frame (2-4) ms + additio...
by cieplik206
Wed Oct 13, 2010 10:14 am
Forum: Wireless Networking
Topic: wireless docs
Replies: 12
Views: 1838

Re: wireless docs

Guys keep in mind that not always a high Signal level like -45 is good, In my epxerience -45 is too much and try to regulate power / antennas / location to decrese this power to value -60, in my setups it fixed quality in the network
by cieplik206
Tue Oct 12, 2010 10:24 am
Forum: Wireless Networking
Topic: wireless docs
Replies: 12
Views: 1838

Re: wireless docs

If you dont know what to ask, just describe everything you can in details, share your config and test results
by cieplik206
Tue Oct 12, 2010 9:43 am
Forum: General
Topic: Mirccc, how to
Replies: 1
Views: 599

Re: Mirccc, how to

Give your client address from public address space
by cieplik206
Thu Oct 07, 2010 3:32 pm
Forum: Wireless Networking
Topic: Access points
Replies: 4
Views: 1334

Re: Access points

Not sure if i Understand you correctly

but if you save a profile about connection on your PC and if your PC will have to reassociate (to same ESSID) it will use stored profile.


However its Client-Driven. if you find a client dev that have to re-authenticate again you have to do it
by cieplik206
Thu Oct 07, 2010 3:29 pm
Forum: General
Topic: Can't connect to Mikrotik via libssh2
Replies: 6
Views: 1560

Re: Can't connect to Mikrotik via libssh2

Maybe its related but Android App "Connect Bot" cannot connect using SSH to Mikrotik Neither.
by cieplik206
Thu Sep 16, 2010 11:18 am
Forum: Wireless Networking
Topic: Cheap CPE
Replies: 3
Views: 1037

Re: Cheap CPE

Yes, you can find good cheap solutions as a CPE at our website, ie:

http://www.technologic.pl/index.php?pag ... &Itemid=29
by cieplik206
Thu Aug 12, 2010 12:24 am
Forum: Scripting
Topic: Reboot Time Log
Replies: 6
Views: 2153

Re: Reboot Time Log

OT: Normis, sure i will, but need some guidance. Created a wiki account with name Cieplik206, but i cannot see anywhere an option to create a page, and where should i linked it ? to Scripting-examples ? or i will create a page source and you will add it ? maybe these are stupid questions but i never...
by cieplik206
Wed Aug 11, 2010 12:00 am
Forum: Scripting
Topic: Reboot Time Log
Replies: 6
Views: 2153

Re: Reboot Time Log

Nice. Maybe add it to Wiki? http://wiki.mikrotik.com/
I do not have an account
Script only works for routers with ntp package, btw.
Very True
by cieplik206
Tue Aug 10, 2010 5:42 pm
Forum: Scripting
Topic: Reboot Time Log
Replies: 6
Views: 2153

Reboot Time Log

As we all know, when Mikrotik RouterOS gets rebooted for any reason we will not see a proper time of this event in log. This is because log entry is generated before NTP client will synchronize. However this issue can be easly solved by scripting. All we need is simple script that will run after reb...
by cieplik206
Fri Jul 23, 2010 9:20 pm
Forum: Scripting
Topic: countdown to reboot....
Replies: 10
Views: 1943

Re: countdown to reboot....

No you cannot save it to file unfortunately, its a feature not bug, maybe a feature wish-list could be a good idea to use it.

EDIT:

Well, you can you another Interface, but in this solution cost is involved (additional hardware requirements)
by cieplik206
Fri Jul 23, 2010 8:50 pm
Forum: Scripting
Topic: countdown to reboot....
Replies: 10
Views: 1943

Re: countdown to reboot....

If you at reconnect getting new IP address from your ppp session, that TCP session will not be kept.
by cieplik206
Wed Jul 21, 2010 1:30 am
Forum: Scripting
Topic: countdown to reboot....
Replies: 10
Views: 1943

Re: countdown to reboot....

Look into history there is a way how to scan on interface you are connected to... using SSH set duration to low value (10s for example) nature of SSH is it willnot drop connection very quicly and scan result will be printed out to console after scan and reconnection. for example this is AP to wchich...
by cieplik206
Wed Jul 21, 2010 1:07 am
Forum: Scripting
Topic: Script: SSH to another Server, Grab Info
Replies: 9
Views: 3659

Re: Script: SSH to another Server, Grab Info

This can be easly done i you have linux server somewhere there as well.

do you have one ?
by cieplik206
Wed Jul 21, 2010 1:06 am
Forum: Scripting
Topic: Mikrotik and libexpect-perl example
Replies: 0
Views: 526

Mikrotik and libexpect-perl example

Helllo

I've posted onto my blog (new site) a how-to for libexpect perl

http://mikrotik.cieplik.info/?p=9
if anyone will use it, please leave a comment

cieplik
by cieplik206
Wed Jul 07, 2010 4:01 pm
Forum: Scripting
Topic: I need script
Replies: 1
Views: 610

Re: I need script

Try it:

# 
:local adminpppoe [/ppp active find name="admin"]
#	
:if ($adminpppoe!="") do={ \
:log info "enabling"
/interface enable lan \
} else={ \
/interface disable lan \
}
	

Use system scheduler to run it how often as you like
by cieplik206
Mon Mar 29, 2010 11:03 pm
Forum: Scripting
Topic: RouterOS and SNMP v2 GET-BULK-PDU
Replies: 3
Views: 1898

RouterOS and SNMP v2 GET-BULK-PDU

Hi All I am playing with SNMP lately, and i dont like SNMP get OID Value in separate PDU ( UDP Packet ) SNMP v2 supports message GET-PDU-BULK which should pack few elements into one packet. That would significantly decreased managment Load on the network. However My experience in SNMP is not very bi...
by cieplik206
Mon Mar 29, 2010 10:47 pm
Forum: Scripting
Topic: RouterOS PHP API class
Replies: 38
Views: 11203

Re: RouterOS PHP API class

for now there is no disconnect method, php recycles all sockets when finishes.

PHP recycles sockets, but i see a long list of active admins in my ROS,
by cieplik206
Wed Mar 24, 2010 12:44 am
Forum: Scripting
Topic: RouterOS PHP API class
Replies: 38
Views: 11203

Re: RouterOS PHP API class

Is there no need to logout from API session in your script ?
by cieplik206
Tue Mar 09, 2010 2:08 pm
Forum: General
Topic: OpenVPN in server mode ??
Replies: 14
Views: 1678

Re: OpenVPN in server mode ??

Hello In this case it is a mistake then. I have to confess that my experience in OpenVPN in RouterOS is poor, but in general I implemented few times OpenVPN on Debian / OpenWRT. My Goal was to talk about VPN in general. I took information from WIKI as granted without verification. Thank you for your...
by cieplik206
Sun Aug 16, 2009 12:28 pm
Forum: Beginner Basics
Topic: Proxying
Replies: 11
Views: 1520

Re: Proxying

I havent used it myself but SOCKS proxy is something what you need.

did you tried it

best regards
by cieplik206
Wed Jun 24, 2009 11:55 am
Forum: General
Topic: IPv6 over PPPoE
Replies: 140
Views: 28286

Re: IPv6 over PPPoE

I need that feature in about 2 months, i am preparing a project that will need that feature, if that will not work, i will buy other equipment than Mikrotik I rather suspect that you'll have to go elsewhere. The Mikrotik guys are being very evasive about the problem. Until I get an answer like "Yes...
by cieplik206
Tue Jun 23, 2009 12:53 am
Forum: General
Topic: IPv6 over PPPoE
Replies: 140
Views: 28286

Re: IPv6 over PPPoE

bump ?

I need that feature in about 2 months, i am preparing a project that will need that feature, if that will not work, i will buy other equipment than Mikrotik
by cieplik206
Tue Apr 07, 2009 9:20 pm
Forum: General
Topic: Hotstpot user routes - what is this for ?
Replies: 1
Views: 496

Re: Hotstpot user routes - what is this for ?

anyone ?
by cieplik206
Sun Mar 29, 2009 8:33 pm
Forum: General
Topic: how to stop netbios (network sharing) in DHCP server
Replies: 22
Views: 3644

Re: how to stop netbios (network sharing) in DHCP server

Maybe becouse you havent said what exaclty your network looks like If its bridged networkm than you have to separe clients from each other: 1. turn off forwarding on AP 2. user bridge filter 3. Use VLANs or turn on L3 filter on your bridge, if you still have no success, contact me on PM, i will see ...
by cieplik206
Sun Mar 29, 2009 8:25 pm
Forum: General
Topic: Hotstpot user routes - what is this for ?
Replies: 1
Views: 496

Hotstpot user routes - what is this for ?

Hello in hotspot user we got those parameters: [admin@Mikrotik] > /ip hotspot user add address disabled limit-bytes-out mac-address routes comment email limit-bytes-total password server copy-from limit-bytes-in limit-uptime profile name what is routes and email used for ???? i've thought that if a ...
by cieplik206
Fri Mar 27, 2009 2:57 pm
Forum: Scripting
Topic: API login problem on RB133
Replies: 19
Views: 6808

Re: API login problem on RB133

Janis is trying to suggest, that you try another programming language without modifications, so that you know where is the bug - in the API, or in your PHP code modifications
I understand, both of you. It is problem with Client implementation.
by cieplik206
Fri Mar 20, 2009 12:05 pm
Forum: Scripting
Topic: API login problem on RB133
Replies: 19
Views: 6808

Re: API login problem on RB133

to know for sure if there is or is not a problem, go to wiki and in API article there is python example. try if that is working - if it is, there is no problem, if it is not, you have some misconfiguration on your router. first place to check is /ip services, is your api enabled? what misconfigurat...
by cieplik206
Mon Mar 16, 2009 4:31 pm
Forum: Scripting
Topic: API login problem on RB133
Replies: 19
Views: 6808

Re: API login problem on RB133

thanks a lot. Acctually sleep between connection attempts was not an issue. problem is solved when i addes sleep into connect function beetween those two lines in function connect: if ($this->socket = @fsockopen($ip, $this->port, $this->error_no, $this->error_str, $this->timeout) ) { socket_set_time...
by cieplik206
Mon Mar 16, 2009 3:45 pm
Forum: Scripting
Topic: API login problem on RB133
Replies: 19
Views: 6808

API login problem on RB133

Hello I am testing API recently to find out how to use in production networks. I've found one case wchich seams to be a bug. I use PHP API class from WIKI (slighlty modified for my needs). This is what i am getting from RB133: Connecting to MT 192.168.1.100 Connection attempt #1 to 192.168.1.100:872...
by cieplik206
Mon Mar 16, 2009 3:39 pm
Forum: Scripting
Topic: PHP API bug - read() fails on large replies - this fix OK?
Replies: 22
Views: 7059

Re: PHP API bug - read() fails on large replies - this fix OK?

well, listen commands have !done, when you send in cancel, also, listen (and all commands without the end) should have their tag set =tag=unendingStory so you can use /cancel with =tag=unendingStory to stop the command then you will have your !done for the command Ok Janis, but what is the point in...
by cieplik206
Fri Mar 06, 2009 12:53 pm
Forum: General
Topic: EoIP tunnel through NAT?
Replies: 2
Views: 7114

Re: EoIP tunnel through NAT?

Due to NAT Your router with ip 192.168.x.x can get access to 10.x.x.x one, but not the other way around. Only way to DST-NAT packet with GRE protocol, with your nat would be Mikrotik that can be done with: /ip firewall nat add action=dst-nat chain=dstnat comment="" disabled=no in-interface=wan \ pro...
by cieplik206
Fri Mar 06, 2009 12:40 pm
Forum: Scripting
Topic: PHP API bug - read() fails on large replies - this fix OK?
Replies: 22
Views: 7059

Re: PHP API bug - read() fails on large replies - this fix OK?

Solution for listen command

Make new method called listen and comment those two lines, and it will work
         if ($_ == "!done")
            $receiveddone=true;


Pawel Cieplinski
by cieplik206
Fri Mar 06, 2009 12:33 pm
Forum: Wireless Networking
Topic: RouterOS reports client as "1Mbps-SP"
Replies: 4
Views: 1873

Re: RouterOS reports client as "1Mbps-SP"

Has anybody tested the difference between short Preamble and long Preamble ? They say Long Preamble goes farther... -Jordan

No diffrence in it is only amout of bytes in frame header. With short preamble you will recieve higher troughput, but some stations that dont support SP will not work at all
by cieplik206
Wed Feb 25, 2009 12:04 pm
Forum: Scripting
Topic: PHP API bug - read() fails on large replies - this fix OK?
Replies: 22
Views: 7059

Re: PHP API bug - read() fails on large replies - this fix OK?

Hi

this works well but there is another problem with this implementation.

Problem is when you are sending "listen" command (ie: /interface/wireless/registration-table/listen ).

As listen never ends, there is no !done command, and from main program read method just freezes,
by cieplik206
Sun Dec 07, 2008 12:21 am
Forum: Scripting
Topic: SCP Support
Replies: 4
Views: 1885

Re: SCP Support

Mikrotik support SCP, you can do it externally.
M.
How ?
by cieplik206
Sat Dec 06, 2008 6:54 pm
Forum: Scripting
Topic: Security of MT
Replies: 6
Views: 1772

Re:

Is there any way to get back admin pass from user.dat and user.idx files?

Of course there is. and if you have everything you need it takes couple of minutes to take that password.

I've tested it
by cieplik206
Wed Dec 03, 2008 10:41 am
Forum: General
Topic: Rate Adaptation algoritm
Replies: 3
Views: 660

Rate Adaptation algoritm

Hello I wonder what sort of rate adaptation algoitm is used in atheros driver in RouterOS. I,ve got some test of diffrences in performance using three diffrent ways. AMMR, ONOE, and SampleRate. Result shown that Sample is the best on stable links from those three. As i want to be prepared more in pl...
by cieplik206
Wed Nov 26, 2008 4:49 pm
Forum: Scripting
Topic: PHP API write question
Replies: 3
Views: 2327

Re: PHP API write question

There is no parameter as netmask . Use: /ip/address/add =address=6.6.6.6/24 =interface=bridge_hotspot Should i send it as one string or using 3 diffrent API->write methods ? just ried it.. and didnt work neither EDIT ok i forgot to add second argument of that method $API->write('/ip/address/add',fa...
by cieplik206
Wed Nov 26, 2008 3:37 pm
Forum: Scripting
Topic: PHP API write question
Replies: 3
Views: 2327

PHP API write question

Hello I am trying a PHP API class. works great. i can read all, but how to write? For example how to set IP address on certain interface ? I tried $API->write('/ip/address/add=address=6.6.6.6=netmask=255.255.255.0=interface=bridge_hotspot'); as well as $API->write('/ip/address/add'); $API->write('=a...
by cieplik206
Mon Jun 09, 2008 11:47 am
Forum: General
Topic: Problem with DHCP package ?
Replies: 1
Views: 1555

Problem with DHCP package ?

Hello I am writing to forum becouse i couldnt to make supout file while error occured. first have a look on a picture attached log_windy.PNG every day there is a scheduled reboot at 4:30 am. Why after scheduled reboot hotspot didntstart working,but started at 4:30 day after ? a bit of logs: restart ...
by cieplik206
Sun Apr 20, 2008 2:18 pm
Forum: Scripting
Topic: How to connect via ssh from MT to another MT to send command
Replies: 9
Views: 2807

Re: How to connect via ssh from MT to another MT to send command

hey guys Maybe other way will be nice to use as well As MT3.x got a basic http/ftp client (/tool fetch) it is possible that remote router will have a script scheduled every some period of time that will do: 1. Download script file from remote location 2. run that script if you want results from remo...
by cieplik206
Sun Apr 20, 2008 2:03 pm
Forum: Scripting
Topic: Script for changing Radio Cards without hassle.
Replies: 0
Views: 884

Script for changing Radio Cards without hassle.

Hi everybody

It is not a technical question but i manage to sort out script to our technicians to do wireless config for them after changing radio cards. I can modify that script a little bit to fits everyones need. is anyone interested ? If not I will not be bothered to do that.
by cieplik206
Sun Apr 20, 2008 1:59 pm
Forum: Scripting
Topic: How to Disable auto-completion of commands in terminal
Replies: 8
Views: 18061

Re: How to Disable auto-completion of commands in terminal

are you saying CTRL+V (paste) triggers this? That's somewhat ironic!
Yes it does

It is but when you are in console window in Winbox. Widnows shortcuts doestn work.

e.g.

CTRL - C = break operation
CTRL - X = safe mode
CTRL - V = auto completion without using tabs

etc.
by cieplik206
Sun Apr 20, 2008 1:55 pm
Forum: General
Topic: How to protection form Layer 2 below ??
Replies: 5
Views: 1341

Re: How to protection form Layer 2 below ??

Or if your switching is mady Mikrotik

WirelessAP, and/or bridged interfaces, you can use bridge firewall

write more details about your network so maybe we will be able to help
by cieplik206
Thu Apr 17, 2008 2:36 pm
Forum: Scripting
Topic: How to Disable auto-completion of commands in terminal
Replies: 8
Views: 18061

Re: How to Disable auto-completion of commands in terminal

You had to accidently pressed CTRL+V in console

just press it again... and it will be back to normal
by cieplik206
Sun Mar 30, 2008 6:17 pm
Forum: Scripting
Topic: Problem with local variable in console (v3.6)
Replies: 3
Views: 1292

Re: Problem with local variable in console (v3.6)

Ouch... stupid mistake..

thanks alot louis

TOPIC CLOSED
by cieplik206
Sun Mar 30, 2008 2:32 pm
Forum: Scripting
Topic: Problem with local variable in console (v3.6)
Replies: 3
Views: 1292

Re: Problem with local variable in console (v3.6)

Ok... i;ve found answer in post http://forum.mikrotik.com/viewtopic.php?f=9&t=22552 EDIT BUT: How to make this Working ???? [admin@primary] > { {... :local test 1 {... :if ($test=1) do={:local test 2} {... :put $test {... } 1 [admin@primary] > But modiefied script is showing that variable test on be...
by cieplik206
Sun Mar 30, 2008 1:44 pm
Forum: Scripting
Topic: Problem with local variable in console (v3.6)
Replies: 3
Views: 1292

Problem with local variable in console (v3.6)

Hi Just want to say i am newbie in scripting so far. I am writing script to do automated job for me but it doesnt work... so i checked local variables under console, and i think something is wrong. [admin@primary] > :local variable "Hello World" [admin@primary] > :environment print [admin@primary] >...
by cieplik206
Mon Mar 24, 2008 7:19 pm
Forum: Scripting
Topic: Hotstpot user profile - on loign script ???
Replies: 0
Views: 915

Hotstpot user profile - on loign script ???

Hi I am planning to use /hotspot user profile on logon event to runs script but..... Is that event comming with any variables ? Is there any way to find out what user is login in (name / ip ) ??? I am thinking to add dynamic queue tree rule everytime user logs in and logs out... but how to find out ...
by cieplik206
Fri Mar 21, 2008 3:28 pm
Forum: Scripting
Topic: Script to reboot router daily.
Replies: 12
Views: 54571

Re: Script to reboot router daily.

yup it does work... just tested it in 3.6
by cieplik206
Tue Nov 06, 2007 6:46 pm
Forum: General
Topic: Mangle doesn't Work...
Replies: 0
Views: 522

Mangle doesn't Work...

Hi i am tring to mark DHCP packets. There is 4 Packets in Getting IP process 1. From client to server - DHCP Discover 2. From Server to Client - DHCP OFFER 3. From Client to Server - DHCP Request 4. From server to client - DHCP ACK this works on UDP protocol communication from client to server: SRC ...
by cieplik206
Tue Nov 06, 2007 4:26 pm
Forum: General
Topic: How to cut off client - client traffic ?
Replies: 3
Views: 878

Re: How to cut off client - client traffic ?

And what about if Hotspot is more complicated ? few radio links and/or WDS ?
by cieplik206
Mon Nov 05, 2007 5:13 pm
Forum: Scripting
Topic: Hotspot authentication issue
Replies: 2
Views: 1071

Hotspot authentication issue

HI My configuration looks like this Internet - modem - MT(hotspot) - AP Clients are connection to Access Point, no problem but i want to extend range of that network using Client Bridge and another Access Point Internet - modem - MT(hotspot) - AP ---(radio)---- Client Bridge - AP2 but clients connec...
by cieplik206
Mon Nov 05, 2007 11:58 am
Forum: General
Topic: How to cut off client - client traffic ?
Replies: 3
Views: 878

How to cut off client - client traffic ?

Hi i am running a hotspot and i want to limit or cut off client to client traffic, NetBIOS - i want to cut off, and TCP i want to limit
by cieplik206
Mon Nov 05, 2007 11:46 am
Forum: Scripting
Topic: How to prevent NATed access
Replies: 20
Views: 5294

Re: How to prevent NATed access

You can use TTL... but my opinion is to let them work.. behind the nat can be 100 computer but they will share one band wich you are giving to them so it shouldn't affect... other solution is if traffic will be high from that user.. try to do some Usage limitation... if Data transfer will exeed some...
by cieplik206
Fri Oct 05, 2007 10:09 pm
Forum: Wireless Networking
Topic: 802.11a/b/g spanish regulations
Replies: 3
Views: 990

Re: 802.11a/b/g spanish regulations

When I obtained the license from CMT, the "Ministerio de Industria"
Can you operate in spain without license ?
by cieplik206
Tue Oct 02, 2007 5:46 pm
Forum: Wireless Networking
Topic: 802.11a/b/g spanish regulations
Replies: 3
Views: 990

802.11a/b/g spanish regulations

Hi

I've noticced that in RouterOS on spanish regulatory domain you can set channels from 1-13 in mode B/G and band A and B from mode 5GHz.. is it what you can use in spain? and another question is what are maximum transmit powers ?
by cieplik206
Wed Aug 22, 2007 11:40 am
Forum: General
Topic: MT Hotspot and Rouge Routers
Replies: 8
Views: 1982

Re: MT Hotspot and Rouge Routers

There is posiibility

If you change TTL to 1 on packets comming out your LAN interface of hotspot that should stop working routers.

how to do it you can find on forum
by cieplik206
Mon Jul 02, 2007 2:02 am
Forum: General
Topic: Can this be done with MikroTik? (tough question on bridging)
Replies: 18
Views: 2897

Re: Can this be done with MikroTik? (tough question on bridging)

The answer to the first question: That is impossible with any normal bridge and any such solution would require custom coding which would be prone to a lot of issues. A L2 network can normally only have one operational link between two places. Any additional links must be muted (disabled/blocked/pr...