What is the price for this product? I do not see in hardware website (https://mikrotik.com/products)

I have CRS connected to CCR router through fiber VLAN service provided telecom company. The other router is almost 1200kms (Remote area). Among service I run through the link is VOIP service and Intenet. Today VOIP service has suddenly stopped working. It is hen I call I can hear them but they can n...

Could anyone give hint on new products?

What is the distance from metal 9HPn AP to client? Is it clear line of sight? Which yagi antenna you are using in client side. Could you name the omni antenna used?

What is this Antenna - 140 cm parabolic dish - double pol (Manufacturer)

From my side i saw security package is utilizing the CPU (in winbox go to tools, profile to see which package is heavy user of CPU).

So I decided to disable security package. (in Winbox go to system, Packages).

That way i solved my problem.

Hi Normis

do you have plan to add more ethernet ports to this FTC Media convertor? I expect one with 5 ethernet ports and another with 8 ethernet ports(few of them poe out)

Will this mAP device have voltage monitor? I am thinking to use the device to monitor -48v telecom site.

1. What is the frequency range 2. Which antenna is recomended 3. As per your spec sheet it is quoted as follows "Metal9HPn is compatible only with another Metal9HPn" Does this means that if I take routerboard with XR9 card...there will be no conection! 4. When are we going to see routerboa...

The problem is; Mikrotik does not have ready made solution on lisenced frequency.

What RouterOS version?

Upgrade to latest version

What is the price fo this dish antenna? Do you plan to have sector antennas?

MikroTik has introduced their own antennas now:
http://www.mikrotik.com/download/share/ ... ries_1.pdf

I have looked to all my distributers; they do not have SXT G-2HnD.

Please if you know any deistributor having SXT G-2HnD; let me know

______
Stephen

I upgraded my omnitik.

It runs for two or three hours then it reboots. In the log I get the following messages;

"System rebooted because of kernel error"

_________
Mapunda

Does. Sxt g-2hnd antenna supports that range if the filters are removed?

I see now there is F36n-PRO radio card that can go to RB411. I was thinking on using F36n-PRO radio card and RB411 as AP. As from you above post, if the filters are removed can the SXT G-2HnD work in 3.3 - 3.8Ghz frequency?

What about frequency range?

The PDF brochure says the wireless card in SXT G-2HnD is Onboard dual chain 5GHz 802.11a/n Atheros AR9280 wireless module. So Does this device uses frequency convertor?

What are the frequency ranges?

This device is the best to work with omnitik. When should we expect to get from our distributors?

http://routerboard.com/RBSXT-5HPnD

Now we are moving.

Waiting for SEXTANT with the same output power !

Please add pppoe client configuration. It will be easy for our technicians to configure pppoe in CPEs thanks for suggestion! what settings do you usually configure? interface, user/pass and service name? of if PPPoE is always on the WAN port, maybe user/pass is enough (use empty service name)? PPPo...

Please add pppoe client configuration. It will be easy for our technicians to configure pppoe in CPEs

Hapi NV2 protocol of MT is best as compared to AIROS. I had a site with very high interference where rocket5 with sector of 16db did not manage to connect my Nano CPEs. I used to switch from TDMA to 802 with no success. Later I installed MT with omni of 7.5dbi NV2. The site is very stable for almost...

That is the issue of 4 wheels drive and 2 wheels drive. Everything as got its own purpose. If you need to have external antenna port you can just assemble routerboards to meet your purpose. If you need to install antennas at high tower and you do not what to run cables this product is not for you. J...

This is VERY VERY VERY GOOD PRODUCT.

I real need this product to expand my wireless. As the cost suggests, it is nice to use in micro cell - a targeted area. With NV2 and low power the device can be used with solar power that comes with small solar panels.

Mikrotik we trust you! Keep it up!!

What is the best practice! is it good to have one PPPOE A/C or each AP should act as PPPOE AC? As I see if you have client looking for tunnel (VPLS) with the two CPEs in the same tower/AP, then by using pppoe the packet have to go to PPOE AC which is wastage of bandwidth. Any idea?

Although it is documented the frequency range 5.17-5.825 GHz. Can SXT go beyond the documented range? I mean from 4.9Ghz to 5.9Ghz

Hi winagain The best way is to have two domains, one for each ISP. Say a user from ISP1 logs with mmm@xxx.yyy where mmm is username and xxx.yyy is the domain for ISP1. And second ISP uses ttt@ppp.qqq where ttt is username and ppp.qqq is the domain of the second ISP. Then use the proxy feature of rad...

Just to make it clear to me.. If say in radius(freeradius) i set Mikrotik-Recv-Limit-Gigawords = 40 Will freeradius automatically deduct downloaded bytes used by client from the Mikrotik-Recv-Limit-Gigawords? As far as I know, when Hotspot request for authentication from freeradius, A reply packet w...

I want to bill my clients according to what they are downloading. I am using radius (freeradius) to authenticate my clients from MT HotSpot. Just I want to understand! If I put Mikrotik-Rate-Limit in the users account (users file), will HotSpot update internal database on the remaining bytes users h...