*) firewall - added "nat-pmp" support; oh god no!! I am still recovering from nat-ein, which gave me severe depression and life-crisis... Why is that? I'm running carrier grade NAT on some 2216's for customers and was looking into either the nat-ein or nat-pmp to try to get customers gami...

I had an issue upgrading from 7.10.2 on one of my 12 2216's. It deleted the loopback bridge so my admin IP and NAT were not working. I recreated the bridge and assigned the IPs to it and all was good, just kind of strange that it happened on one of my routers and not the others.

Running with connection tracking off cuts down CPU usage quite much since connections doesn't need to be kept or matched. You really should consider creating raw rules. If you are using L3HW support, then you could create rules under /interface ethernet switch rule maybe instead. I've already got t...

I run an internet provider that pushes ~20Gb at peak usage. I upgraded our 1072's to 2216's and everything has been working really well, except the extremely disappointing CPU usage when doing firewalling. Mikrotik's webpage states that with 25 bridge filters at 512 byte size the 1072 will do 37,270...

Hi, Im just wondering why introducing 7.9 take too much time? :) Isnit gonna be revolutionary build? :) What you wish for? I would like to see: seamless roaming including 800.11v, compatible samba with Hikvision cameras, thats all :) what do you even mean by "too much time"? 7.8 [stable] ...

I was having issues with random reboots on my Edge Routers (600+ clients per router doing CG NAT and conn tracking for ~400) with every firmware after 7.4.1. I was also having issues with incorrect duplicate routes being dynamically created randomly for PPPOE users. Both issues appear to be fixed wi...

I've got some 2216's that are rebooting. Sometimes they will start chain rebooting, 3-6+ times. Then they will stop. I also went in and disabled the all vlans and re-enabled one by one to see if I could see if it was something going on with one of the VLANs and it then it stopped rebooting. I've had...

I run an ISP so this is at the provider level. We have customer IP addresses in firewall lists by speed, eg: 100000. Then we use mangle to park packets with those speeds as packet marks. We are currently using PCQ's and Simple queue to limit our users bandwidth but I wanted to try the new CAKE queue...

I'm seeing the same error every time a client disconnects from the PPPOE server on the router. Only happens on RouterOS7. Currently using 7.2.3. Most of my OSPF network is still running ROS6, only seeing the error on the router with ROS7 I will try updating to 7.4 later tonight and see if that resol...

Did further investigation regarding the long-boot issue. ROS 6.48.4 + Firmware 6.48.4 -> no issue -> booting takes around 1:30 minutes ROS 6.49 + Firmware 6.48.4 -> no issue -> booting takes around 1:30 minutes ROS 6.49 + Firmware 6.49 -> issue -> booting takes around 10 minutes! I have done now a ...

Not sure if similar issue for me I have CHR installed on a VPS provider that allows 'internal private network'  CHR instance has private network interface IP I have 3 other VM's with private network, along with eth interfaces configured. I have IPSEC vpn tunnel setup on CHR  and it terminates back ...

Update The Port problem its seems like a Marvell chip issue, i found this another forum ( http://forum.eltex-co.ru/viewtopic.php?t=9408 ) Same problem, the solution is RMA: replacement for a new one. After this, I dont think all of the CRS-354 swicthes are affected. It's not the Mikrotik's fault. T...

Just logging in to say I have the same issues. It caused me 11 hours of downtime for 500 customers when I went out of cell range this last weekend... I guess I will go move the switches off of ports 1-8 until they can fix this. It's pretty annoying because I also had issues with the 24 port 10 Gig s...

Thank you for sharing the details, we managed to observe the same issue locally and look forward to improving this on upcoming SwOS versions. Unfortunately, the only possible workaround is to boot your device into RouterOS when using most of the SFP+ interfaces. Thanks for the reply EdPa, do you gu...

UPDATE: So I took the SFP modules out of the switch and it started working. I added them 1 by 1 and I can have 18 SFP modules plugged in and once I plug in the 19th SFP module the switch freezes, displays the fault in putty, and I lose pings. If I pull out the SFP for any port the switch starts work...

Hello, I have a brand new out of the box CRS326-24S+2Q+ which I loaded up in RouterOS then made it boot into SwOS. I can ping it at 192.168.88.1 and load the browser logging in with admin no password, but then it shows a fault light on the switch and I lose pings as it reboots itself. I serial'ed in...