Community discussions

MikroTik App

Search found 9 matches

by clovehitch
Sat Jun 05, 2021 8:52 pm
Forum: General
Topic: ROS upgrade failed on CRS328-4C-20S-4S+ now stuck in SWOS?
Replies: 3
Views: 429

Re: ROS upgrade failed on CRS328-4C-20S-4S+ now stuck in SWOS?

do some NAT for reach 192.168.88.1 by web browser the device upgrade swos with latest 2.13 https://download.mikrotik.com/swos2/css328/swos-css328-2.13.bin after that select inside swos to start with RouterOS and reboot This worked out great, thank you. I haven't worked with SWOS before and didn't k...
by clovehitch
Sat Jun 05, 2021 2:03 am
Forum: General
Topic: ROS upgrade failed on CRS328-4C-20S-4S+ now stuck in SWOS?
Replies: 3
Views: 429

ROS upgrade failed on CRS328-4C-20S-4S+ now stuck in SWOS?

I was upgrading a CRS328-4C-20S-4S+ running ROS 6.44.6 to the latest table. The switch did not come back online after 5 minutes. I have another switch connected to it with LLDP, it shows the following: IP: 192.168.88.1 Version: 2.7 Board Name: CRS328-4C-20S-4S+ I'm guessing the upgrade failed and so...
by clovehitch
Tue May 11, 2021 6:57 pm
Forum: Forwarding Protocols
Topic: Why is a higher AD static route preferred over an lower AD iBGP route?
Replies: 3
Views: 1091

Re: Why is a higher AD static route preferred over an lower AD iBGP route?

Any thoughts on this? Why would a higher AD static route be the active route over a lower AD iBGP route? I know the scope settings can change this but those are set to the default values.
by clovehitch
Sat May 08, 2021 12:48 am
Forum: Forwarding Protocols
Topic: Why is a higher AD static route preferred over an lower AD iBGP route?
Replies: 3
Views: 1091

Why is a higher AD static route preferred over an lower AD iBGP route?

router=CCR1000-7G-1C-1S+ version=6.48 Setup: 2 routers with a single eBGP session to separate ISPs iBGP between the routers. Each router has a static default route to the ISP with AD set to 254 Each router is receiving a default route via it's eBGP session. ISP-1 ISP-2 (ASN-20) (ASN-30) | | | | rout...
by clovehitch
Wed Feb 10, 2021 12:35 am
Forum: General
Topic: Freeipa radius ldap backend login
Replies: 4
Views: 2547

Re: Freeipa radius ldap backend login

I burnt a lot of time trying to get this to work. - most guides are 5+ years old - everyone that's giving advice and tips seems to be using different versions - security issues trying to get this to work The list kind of just goes on. If someone could do a write up of all the steps needed for a fres...
by clovehitch
Wed Feb 10, 2021 12:30 am
Forum: General
Topic: CRS354 remove interface=all from bridge
Replies: 3
Views: 329

Re: CRS354 remove interface=all from bridge

What happens if you add individual interfaces first and remove interface=all at the end? interface=all dynamic adds the remaining interfaces to the bridge so you can't add or remove them individually. Assign an admin MAC to the bridge interface, will probably drop you but then connect again, that s...
by clovehitch
Tue Feb 09, 2021 7:39 pm
Forum: General
Topic: CRS354 remove interface=all from bridge
Replies: 3
Views: 329

CRS354 remove interface=all from bridge

# model = CRS354-48G-4S+2Q+ What's the best way to remove the following command: /interface bridge port add bridge=bridge interface=all Then add in the individual ports to the bridge: /interface bridge port add bridge=bridge interface=Gi0/1 add bridge=bridge interface=Gi0/2 add bridge=bridge interfa...
by clovehitch
Fri Mar 06, 2020 10:18 pm
Forum: Wireless Networking
Topic: In Search of an multi-LTE Modem Router Combo
Replies: 1
Views: 2241

In Search of an multi-LTE Modem Router Combo

I need to set up multiple LTE WAN connections (US-based) and I'm having a hard time figuring out what would work best. I see two products that look like they would work: RB912R-2nD-LTm&R11e-LTE-US and RBLtAP-2HnD I don't need an AP built-in but it seems that comes with all of the products. RB912...