Community discussions

MikroTik App

Search found 18 matches

by VolleyTom
Thu Jun 29, 2023 6:38 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 369
Views: 126877

Re: v7.10 [stable] is released!

RB4011 after update lost ovpn.
Connecting
Established
Disconndcted

<user> detect UNKNOWN
I am not sure how was before
Any ideas?
I have the same OVPN-Issue, with 7.10 and 7.10.1.
by VolleyTom
Sat Jun 10, 2023 10:48 am
Forum: SwOS
Topic: CSS610-8G-S2+: Trunk not working via SFP+
Replies: 4
Views: 2964

Re: CSS610-8G-S2+: Trunk not working via SFP+

I played around a little bit and the following solution worked for me (but I do not really understand it, because the VLANs Tab is empty). SW1: This is the definition in VLAN-Tab: * Trunk-Ports are Port 7+8 and SPF 1+2, they are in VLAN 1. * Access-Ports are Ports 1-6, where I define the VLAN. VLANs...
by VolleyTom
Tue Apr 18, 2023 8:24 pm
Forum: SwOS
Topic: CSS610-8G-S2+: Trunk not working via SFP+
Replies: 4
Views: 2964

Re: CSS610-8G-S2+: Trunk not working via SFP+

Hello, Router connects to SW-1 port 7 => Correct SW-1 provides DHCP-Addresses and access on Port 1-6. SW-2 provides DHCP-Addresses and access on Port 1-6, when SW-1 and SW-2 are connected via Gig-E-Trunk (E.g. Eth8). SW-2 DOES NOT provides DHCP-Addresses and access on Port 1-6 to Router, when SW-1 a...
by VolleyTom
Tue Apr 18, 2023 5:47 pm
Forum: SwOS
Topic: CSS610-8G-S2+: Trunk not working via SFP+
Replies: 4
Views: 2964

CSS610-8G-S2+: Trunk not working via SFP+

Hello, I have two CSS610-8G-S2+ which I want to connect via SFP+ Fiber link. My Router is connected to Switch1 via Trunk on port 7. This is working fine, I can get IPs from DHCP from several VLANs on Switch1. If I try the same on Switch2, I do not get DHCP-IPs, if I use the SFP+ Ports, if I use an 1...
by VolleyTom
Wed Oct 05, 2022 4:36 pm
Forum: Forwarding Protocols
Topic: RouterOS 6: Add IP from Default Gateway to VRF Default Route
Replies: 3
Views: 1477

Re: RouterOS 6: Add IP from Default Gateway to VRF Default Route

But if I receive the Gateway via DHCP, how should I configure this? Is it required to change this manually every time?
by VolleyTom
Wed Oct 05, 2022 4:25 pm
Forum: Forwarding Protocols
Topic: RouterOS 6: Add IP from Default Gateway to VRF Default Route
Replies: 3
Views: 1477

RouterOS 6: Add IP from Default Gateway to VRF Default Route

Hello, I'm getting from my provider the IP of my WAN-Port via DHCP (e.g. 20.1.1.2/24) and I have a default route in my main VRF to the provided gateway (20.1.1.1). Now I would like to add to my VRF "Guest" a default route, that the internet is reachable from this VRF, this is done via /ip ...
by VolleyTom
Wed Sep 28, 2022 11:13 pm
Forum: Useful user articles
Topic: Upgrade Docker Container when using remote-image LATEST
Replies: 1
Views: 3328

Upgrade Docker Container when using remote-image LATEST

Hello, Has someone an idea, how I can upgrade e.g. my Pi-Hole-Container running on Mikrotik 7.5? I'm using as Remote-Image = pihole/pihole:latest and when I open the WebInterface I can see that there is an Update available: Docker Tag 2022.08.1 Pi-hole v5.11.4 · Update available! FTL v5.16.3 · Updat...
by VolleyTom
Tue Jan 25, 2022 8:45 pm
Forum: General
Topic: Information about ovpn log information
Replies: 0
Views: 1789

Information about ovpn log information

Hello, I have logevents like this: Jan 01 00:00:00 Router %MIKROTIKVPN: VPNUSER logged out, 2426 8798275 307780041 143841 209279 from 1.2.3.4 I tried to find information about the 5 numbers, could someone tell me, what this is? I think this are bytes in, bytes out, packets in, packet out and the las...
by VolleyTom
Tue Jun 29, 2021 11:55 pm
Forum: General
Topic: Missing Firewall ACTION at Logs
Replies: 9
Views: 1239

Re: Missing Firewall ACTION at Logs

You are right, normally I'm only logging the drops/rejects, but I in some cases I'm interested in the acceppts, for example who is trying to connect to the VPN to run reports based on this data.
by VolleyTom
Tue Jun 29, 2021 3:35 pm
Forum: General
Topic: Missing Firewall ACTION at Logs
Replies: 9
Views: 1239

Re: Missing Firewall ACTION at Logs

If I activate logging for a rule, I would like to see the ACTION at the log, without adding prefixes. Otherwise I don't know, if the packet is dropped, rejected or accepted.
by VolleyTom
Tue Jun 29, 2021 9:38 am
Forum: General
Topic: Missing Firewall ACTION at Logs
Replies: 9
Views: 1239

Re: Missing Firewall ACTION at Logs

Yes, the Prefix would be possible, but should this not be part auf the default Logging Template, where you have the protocol, the source + destination?
Because if I want a logging, I need to add this to every rule and every device, this would be a lot of work to change.
by VolleyTom
Tue Jun 29, 2021 8:56 am
Forum: General
Topic: Missing Firewall ACTION at Logs
Replies: 9
Views: 1239

Missing Firewall ACTION at Logs

Hello, If I look at the firewall log entries, I only see the following: input: in:Eth1 WAN out:(unknown 0), src-mac 34:da:b7:c3:6d:1f, proto TCP (ACK,FIN), 142.250.1.1:443->10.0.1.1:37206, len 52 But I'm missing the information, if this event was accepted or blocked or rejected (the ACTION). Is ther...
by VolleyTom
Sun Apr 25, 2021 10:34 am
Forum: Forwarding Protocols
Topic: VRF Guest - Route to Internet
Replies: 0
Views: 2157

VRF Guest - Route to Internet

Hello, I have a question, how can a make a default route of my "VRF Guest" if I have only one public internet address. Configuration: WAN-Interface: DHCP Client which gets an IP Address (e.g. 200.200.200.200) and a gateway (e.g. 200.200.200.1). NAT: Chain=srcnat Out-Interface=WAN-Interface...
by VolleyTom
Sun May 17, 2020 7:48 pm
Forum: General
Topic: User Manager - Radius Authentication - Response send from wrong Interface
Replies: 6
Views: 1945

Re: User Manager - Radius Authentication - Response send from wrong Interface

It does sound like a bug, you could report it to Mikrotik support.
I reported the issue to MicroTik.
by VolleyTom
Sun May 17, 2020 9:23 am
Forum: General
Topic: User Manager - Radius Authentication - Response send from wrong Interface
Replies: 6
Views: 1945

Re: User Manager - Radius Authentication - Response send from wrong Interface

Thanks for the reply. I'm using the loopback-interfaces to send the packets and what I can see at the recieving device (UserManager & GRE Tunnel end point), the Router/UserManager receives the packet with the correct loopback ip addresses; I also see a successful authentication at the UserManage...
by VolleyTom
Thu May 07, 2020 4:41 pm
Forum: General
Topic: User Manager - Radius Authentication - Response send from wrong Interface
Replies: 6
Views: 1945

Re: User Manager - Radius Authentication - Response send from wrong Interface

Configuration: R1 WAN-IP 1.2.3.4/24 GRE-Tunnel-IP 10.0.0.1/30 (1.2.3.4 -> 5.6.7.8 ) Management-IP 192.168.0.1/32 R2 WAN-IP 5.6.7.8/24 GRE-Tunnel-IP 10.0.0.2/30 (5.6.7.8 -> 1.2.3.4 ) Management-IP 192.168.0.2/32 Management-IP is proviced via OSPF and this is working fine and I can ping the R1-Managem...
by VolleyTom
Thu May 07, 2020 9:54 am
Forum: General
Topic: User Manager - Radius Authentication - Response send from wrong Interface
Replies: 6
Views: 1945

User Manager - Radius Authentication - Response send from wrong Interface

Hello, I have two microtik router and these routers are connected via GRE-Tunnel. Router1 has the User Manager running. Router 2 uses the Radius Server of Router1 and I tried to send the Radius Request from the Management-Interface of Router2 to the Management-Interface of Router1, Router1 receives ...
by VolleyTom
Sun Apr 12, 2020 8:42 am
Forum: Beginner Basics
Topic: Mangle Rule do not trigger
Replies: 0
Views: 1555

Mangle Rule do not trigger

Hello, I would like to know, how much traffic my LAN-Interfaces and my WLAN-Interfaces produce, therefore I created "Mangle Rules with passthrough" as shown in some tutorials. The LAN & WLAN Interfaces are at the same Bridge, therefore I created "Interface Lists" for with the...