MikroTik

heiko_s

i meant "listen" on network packets -as the customer does not have the password, no one from the customers net has connected to the device. If the windows PC had been compromised, it could have listend only to inside packets. Normally the password is changed by the script, but sometimes th...

heiko_s

Thanks for the replies. To make it clear: The ports were disabled by the service ports - not reachable from inside nor from outside. We have around ~500 CPE's and an automated setup script which does any changes for us. The RDP Port was not open to internet - just to our management network 172.16.x....

heiko_s

Good morning everyboy, since two days, one of our customers has a problem: all outgoing http traffic is redirected to an chinese website hao.360.cn. At first we thouhgt that there is an trojan on the PC, but we found out that the RoS device, which is the router to the internet, is the problem. I tes...

heiko_s

Have had this problms on RB1200 Boards. Fix was to change the port Connected. Try to change Ethernet port at Your NAS (pppoe-server) to se if it helps. We could not change the port because it is running on a bridge. I noticed, that when i use another RB as destination, the behaviour stays the same....

heiko_s

Hi, we are running a small wireless network with clients authorosized over PPPOE and radius. Not long ago we were able to test the speet to out AC with the bandwith tool correctly. (e.g. a user has a limit of 2M, the bandwith test shows 2M with UDP) But for a while now we get some strange results. B...

heiko_s

Hi, i tried to export my actual dude configuration. After pressinf the export Button nothing happens. CPU utilisation on Dude Server goes up to 100% for a couple of minutes and then back to 2%. System: RB 1000 with Dude Store on 8GB CF Card. ROS 3.23. I have 3 Maps with allover 60 devices on them. T...

heiko_s

We use Dude 3.4 and various ROS Versions. The linkspeed is shown correct with versions up to 3.20. (we don't use 3.22) With 3.23 the mentioned propblem appears - no linkspeed is shown. ;o( [update] the history is filled with data - even if there is no actual linkspeed is shown Any solution in sight ...

heiko_s

concerning the changelog, nothing new was added to the usermanager.
i guess, there is no possibility to clear the logs.

heiko_s

Due to the fact that MT does not support SMTP auth, the mails are directly delivered to the mailserver of the reciepient (if you tell your script) One possibility: Create a mail command with the specific mailserveraddress for each different recipient domain or other possibility: Setup an mailrelay f...

heiko_s

Hi, sure that is possible, take a foreach loop for all users and cut off the first x characters from the name. The proof with one ore more if quests if string matches your desired. If yes - reset counter. At the moment i'm not in front of a MT box - so i can't give you the exact code, but if you nee...

heiko_s

Hi Omega, i finally got my script to work with the usermanager values. But for a warning, it would be very usefull to calculate the queues. We have a L4 licens for the usermanager - so there are just 20 acitve sessions with accurate up-to-date usesager values - the other values are calculated only a...

heiko_s

Hi Stefan,
thanks for your mail. A reply is on the way to you ;o)
regards Heiko

heiko_s

Hi,
please send an email regarding the german "confederation" - this should not be discussed over here ;o)

regards
Heiko

heiko_s

Hi folks, as the disussions of mobile roaming charges of cellphones in the european countries are always hot and especially in the focus of the politicians, what about forming a european WISP net in which our customers can roam without paying additional money? Over here in Germany, we have a great r...

heiko_s

If all else fails do a netinstall keeping the old config without uploading the XEN package... :) VT is not required as all guests run paravirtualized Problem is: the PCengines Board supports booting from LAN but won't boot from netinstall. I had to extract the CF Card and reinstall it on another PC...

heiko_s

on what hardware you installed the xen package and what you see on the display (when rebooting) when you attach it to the hardware? PCEngines - miniATX with AMD Geode 500MHz CPU - 256 MB RAM. I know this isn't powerful enough and it hasn't VT but it is 386based ;o) You see ROS coming up something l...

heiko_s

I wanted to give the xen package a test. After installing it on a pcengines Board (i know this wasn't powerful enough for virtualisation - but i had it in spare ;o) ) and rebooting, the board starts to permantly reboot in an endless loop. No chance to get it up working again. A feature or boot optio...

heiko_s

i've the same problem. Booting on 800MHz isn't possible. Okay - CPU is overclocked at 800MHz but WHY tells MT on the routerboard website that it WILL work with 800MHz - i thinke there was no testing at all for this feature. i hope they'll wipe this option out from the routerboot that noone accidentl...

heiko_s

...even the script won't work...
what helped was disabling the logs - but the sessions still remain.

If you delete the sessions in the webgui - does it release diskspace - i tried it, the sessions were gone but the disk was still full. ;o(

Regards
Heiko

heiko_s

Anything new concerning this issue ?

Regards
Heiko

heiko_s

i figured that out, but i'm wandering what limitations the variables have...

heiko_s

No solution in sight ?

heiko_s

Hi folks, i'd like to create a daily email to my account which contains a list like this: User: xyz download 12345 MB - Upload 345 MB User: zxy download 54321 MB - Upload 543 MB ... and so on for all 350 users in my usermanager. I'v already implemented the search for the useres and amounts - thanks ...

heiko_s

I took a look on the scripts yesterday and tried to adadept it for our needs. After fighting a bit with the script editor ant the scripting host, i got a "fastshot" up and running. Can anybody say why there is no syntax highlighting in the editor an why you don't get ANY information why a ...

heiko_s

I too have also adapted those scripts for our setup with excellent success. We have managed to control many aspects of usermanager and ROS etc via scritpting. Hi airstream, unfortunatly there's no possibility to sen PN's in this forum. I'm searching for a job in NZ - maybe you've some usefull advic...

heiko_s

Hi "G" ,
i'd like to do some scripting for Userman to get accountin infos via email.
I think very similar to that what you are doing.
Is it possible that you send me your script via email or post it here? ;o)

Many thanks in advance!

Regards
Heiko

heiko_s

Hi "G" ;o) ...but you either don't know in which decade the new version will be released, don't you? I too a look on the RadMan. apart from their strict licensing and the encrypted php code, it has not alle the features UM has. Not forget the great advantage to run UM from a powersaving Ro...

heiko_s

Hi Giepie,
Thanks for the tip ;o)

the only thing i really suffer from is the small harddisk-space and the missing feature to store the database and the logs on a CF card.

Good night

heiko_s

we will make it possible to store UM DB and other data on the CF. booting from it will not be possible

Hi,
i'm also looking foreward of storing the UM database on a CF card.
Is it already possible?
Or, if not, when will it be?

Thanks in advance

Heiko

heiko_s

Hi, i have the same problem - running unsermanager on a RB600 with damn small harddiskspace. I'v ~ 800.000 entries in the logs. I ran the above script but except of the fact that the CPU goes up to 100% nothing seems to happen. Is there a way to get rid of the database and logs all x days to prevent...

heiko_s

May be a configuration error. Do you use dfs without a scan list?
5180 is then the first frequency to use. And as it's a low power
frequency it gives real bad connections.

Stefan

Thanks for the hint.
Does dfs override the set up primery frequency ?

Regards
Heiko

heiko_s

THANKS for alle the suggestions - i found it in the documentation for backup and restore!

thread may be closed!

heiko_s

Hi, i have an MT Lv5 AC running the usermanager. The systemload is getting higher and i decided to split the services apart. For this case, i'd like to move the usermanager to another machine with a lv5. Is it possible to do it without loosing the whole userconfig? How is ist made? Thanks for your h...

heiko_s

as i found nothing wrong, i decided to set up a routerboard for testing with the desired tunnel.
This worked fine, so the tunnel-config can't be the problem?

Is there anybody out there with an idea?

H E L P

heiko_s

We have seen the strangest problems if you do use MAC addresses other than from the range described in the manual. All of those problems were fixed by simply using the "correct" MAC addresses. Well worth a try! Best regards, Christian Meis Hi Christian, i gave it a try... and nothing chan...

heiko_s

We have seen the strangest problems if you do use MAC addresses other than from the range described in the manual. All of those problems were fixed by simply using the "correct" MAC addresses. I've already heard about that - i'll test it on thursday evening. Hope that works! Other questio...

heiko_s

have you check the mac address each EoIP ? maybe there're have the same one.

Yes i did.
There were no duplicate MAC in the bridge or tunnels.
I realized, that for EoIP should use a certain range of MAC addresses - i think all my MAC are from outside of that range...

heiko_s

Hello to everyone, i tried the search function but didn't find anything usuable... We have following configuration up and working fine: Router OS 2.9.44 on an PC with 2 Ethernet interfaces. ether1 connected to a dsl router, ether2 connected to internal net. Our internal net is covering a wide area w...

heiko_s

seems a little like my problem.
Downgrading to 2.9.44 didn't help.

Problem not fixed!

heiko_s

Hi together, after unsucsessfully searching the forum, i decided to start a new thread: I have a RB532 with daughterboard installed. 2x R52 directly attached to the RB532, one CM9 is placed on the daughterboard. The cm9 is used as client uplink to another RB532. We installed new antennas and switche...

Search found 40 matches