MikroTik

npero

I have some problem on ax2 but after couple days, device not connected to WiFi in log say some type of authentication error something with PMKSA.
Reboot device and working again.

npero

Also can confirm for MikroTik S-85DLC05D on HEX S and PowerBox pro.
Downgrade to 6.48.6. working, back to 7.3.1 don't have any information about SFP module.

npero

I using on two links it is seems to me less stable links, before I don't have disconnection for weeks after update to 6.47.1 have every 24-48h disconnections for one seconds it is not critical but seems to me less stable that has been before.

npero

LHG XL 52 ac is dual band or dual card (interface) device ? Look like dual card for this paragraph in news y. You can easily setup the 5 GHz channel as the main one with speed up to 600 Mbps and use the 2.4 GHz channel as an automatic backup connection with speed up to 260 Mbps or use both connectio...

npero

Yes after two months first rain in Serbia but here it is light rain with little snow. With this new version is working great on my short link 240 and 340m with wAP i LHG no disconnect.
We will see on heavy rain or show when is happens, backup link is ready

.

npero

Yes it possible seem to me poe controller is separate chip just controlled by main processor, resetting just reset main processor but not interfere with poe controller, It is nice feature if you upgrade 960 not lose power on port, I like this feature. If you want to power off and power on device con...

npero

Some problem but with 960GSP just regular restart by watchdog every 4 days in old version 6.42.xx have uptime 100day and more, support give me generic answer netinstall to last version and if happens again send again supout.rif. Also have PowerBox Pro for now only one watchdog restart after update t...

npero

you've got an e-mail

I send you replay but did not receive any mail from you after that.

npero

I am interested to buy it. Please can your left email or contact me on npero2(at)gmail(dot)com I have some used LHGac, SXTsq ac, we took down in the last weeks, because of unsolved problems with ARM Boards, if someone want to get them, feel free to ask, otherwise we throw them away. mistry7 weird, n...

npero

Use NetInstall to reinstall RouterOS they will give you another I thing 72h or 48h hours working time to enter licence. They counting time only when working.
For licence make supout.rif and send to support they will generate licence for that board without time limit.

npero

I have two link that combination but PtP links, one wAP60G LHG60G distance 233m and other link distance 313m. In very heavy rain have disconnection, on middle rain disconnect for couple second, now using 6.42.6 see in rc have changes maybe that can help not try for now. Before on 233m link using two...

npero

Confirm some problem.

npero

Some question. Do we need to ground cable separately or have some type of varistor or similar between utp ports and ground and not need to ground cable ?

npero

The cable must ti oriented down, rotate you device that cable is down, in that case not need any other method to make it water proof. Mounting like on picture is just mater of time when water or condensed water will fill up case and fry electronic inside. MUST BE installed vertically if you need to ...

npero

wAP60G 240m link updated from rc32 to rc42, client not connecting any more in scan see signal but not connecting, back to 6.42.5 it is working again, but seem to me it is not stable as has been in 6.42.1. Also please check scan for frequency 64800 seems to me it is not scanning that frequency when c...

npero

Based on mrz suggestions I changed API to work with old and new login style. if ($this->socket) { socket_set_timeout($this->socket, $this->timeout); // RouterOS >= 6.43 $this->write('/login', false); $this->write('=name=' . $login, false); $this->write('=password=' . $password); $RESPONSE = $this->r...

npero

Look viewtopic.php?f=21&t=133420&start=100#p663507 at the end of post say need to use new Winbox 3.14 in rc17.

npero

On what ROS? Newest r59 or 6.41.4? There are same wAP60G link without any our shields etc? rb56 for now, planing upgrade to final version in Friday. Just wAP60G unit from Wire kit package without anything. Also today is raining have some link drops but they has been just for 1s that say in log.

npero

You can do it that now just run script in scheduler read RSSI or signal and disable or enable port in bridge or whatever you wont it is possible now with script run in scheduler.

npero

interface w60g monitor wlan60-1 Just replace wlan60-1 with your interface name they will give it something like this connected: yes frequency: 58320 remote-address: 04:xxxxxx mcs: 4 signal: 40 rssi: -68 tx-sector: 28 tx-sector-info: left 3.8 degrees, down 3.8 degrees rx-sector: 96

npero

wAP 60G by the google maps 238m distance. In good weather condition mcs: 4 signal: 40 rssi: -70 tx-sector: 28 tx-sector-info: left 3.8 degrees, down 3.8 degrees rx-sector: 96 In btest UDP have 600-800Mbps also have half hour with rain speed drop to 100Mbps in test. For now wating rain again to see r...

npero

Yes.
https://www.youtube.com/watch?v=lttApfKouHU

npero

Live stream will be nice

.

Edit:

https://www.youtube.com/watch?v=zv54GidX0qQ

THANKS

npero

Grid antenna have only one polarization it will work worst that SEXTANT from my experience. One solution you can try is to replace only board in the SEXTANT, open SEXTATNT and replace board with RB911G-5HPacD I try this and replacing give me little better signal because new board have higher rf powe...

npero

If you have bridge just disable rstp and DHCP server will work again.

npero

Yes, I expired some problem in VirtualBox also try VMWare something, also contact support for now only solution is if you use virtual machine to install select x64 system in virtual machine after that CHR image working with free licnce. I try x86 iso and CHR image on x86 and try to paste licence aft...

npero

Thanks, I don't try to click on map name in table

it is working.

npero

Anyone know how to make
- Maps are viewable in web mode ??

I look on wiki but I don't have that option in rc31.
Thanks.

npero

CPU/IPsec performance looks great, missing switch features doesn't. Cancelled my order today because of this :'(

What's new in 6.38rc19 (2016-Oct-24 11:19):

*) winbox - fixed missing switch menu for mmips devices;

npero

What's new in 6.38rc12 (2016-Oct-11 10:35):

*) health - show power consumption on devices which has voltage and current monitor;
.
Could you be more specific?

I thing in devices where have voltage and current sensor they just do P=U * I

npero

I see announcement on Russia MUM here is ti https://youtu.be/NjDdq3O6VoM?t=1339 before couple days.
Look the video they have on slide speed test.

npero

After the update on x86 (from 6.36.3) wireless package turn to disable and you can not ENABLE.
(Check on 2 systems Alix board and PC)

Just to confirm some problem here on x86, after downgrade lost wireless configuration, supout.rif sent to support.

npero

Both primary-ntp and secondary-ntp require an IP address. Do you maybe using ntp package ? With ntp package system ntp client set enabled mode primary-ntp secondary-ntp without system ntp client set enabled primary-ntp secondary-ntp server-dns-names if you don't need ntp server don't have any reaso...

npero

No problem at all I using on two places 260GSP powering DynDish it is working for I while.
Of course on 260GSP is connected more device on frist one 2xBaseBox and LHG5 on second plus two more 911ac it is workiign no rpoblem at all after firmware 1.16.

If you buy 260GSP update to 1.16 or new version.

npero

You can install OPC server that support SNMP from any manufacture not limited for some software company because OPC is standard, any SCADA system today must support reading information from OPC server. I personally don't like ModBus, I am Simens guy like ProfiBus, ProfiNet :) there is lot of protoco...

npero

For example Siemens WinCC support SNMP using OPC, you can read data from Mikrotik using SNMP, also other SCADA software can do the some. Just type in google SNMP OPC server, enable SNMP on Mikrotik and rest is on your SCADA software or OPC server to support read data by SNMP. The OPC Server for SNMP...

npero

Client is connected run scan it is working

npero

They all ready have background scan if using wireless-rep package

also for detail manual how to use read http://wiki.mikrotik.com/index.php?titl ... eless#Scan

npero

It is simple, database from new version 6.37rc is not compatible width old version.
Look here http://forum.mikrotik.com/viewtopic.php ... 24#p549840

Downgrade to older versions wont be possible from v6.37.

npero

!) wireless - DFS option is removed and forced to "dfs=radar-detect"; I have replaced all ubnt radios with mikrotik because of this. Now I will stick to 6.36. There is a 10min wait time in 5600-5650Mhz and 30min wait time if radar detected. Good luck! I not try yet, but if change mode to...

npero

Yes I thing, why because SEXTANT have gigabit ports but 18km is to much it will have low signal and in that case gigabit port have no effect. With LHG you will have almost some signal because they have higher gain antenna and lower output power at the and they only one thing left price. My opinion ...

npero

Buy and try it, I buy for test my impression is compare performance and price is nice, not nice but very very nice. It is not best, but price killing, dual chain 802.11n 5GHz, nice antenna gain, 100Mbit Ethernet, again dual chain give you possibility with lower signal to have 100mbit transfer what i...

npero

You are right lots of distributor have TC version new version with vertical cast but some of them have also classic version without TC for almost some price. This pop up in search https://www.i4wifi.eu/index.php?stoken=64C7F918&force_sid=&lang=1&cl=search&searchparam=941&AndOr=an...

npero

They are producing both version new and old when ordering ask for hAP lite classic that is old version.

http://routerboard.com/RB941-2nD

npero

Go to package click on wireless-fp then click uninstall some thing on wireless-cm2 reboot device using system reboot command. When is go back upload wireless-rep reboot and you have enabled wireless-rep package. Warring this must be performed when you are using LAN because uninstalling wireless. Or ...

npero

Username and password now integrated with user management in ros, you need to use username and password using log into router. dont understand what you mean... Im trying to login dude server via dude client and its says me wrong username and password. You dude server is on Mikrotik is it service on...

npero

Username and password now integrated with user management in ros, you need to use username and password using log into router.

npero

Just add to scheduler command to force update to some time interval I usually add 3 or 5 minutes.

npero

Hi,

What is this Device:

RB960PGS

Mistry7

Most likely HEX Poe, POE, 5 Gigabit ports no wireless looks like that.

npero

For me update to 1.15 resolve that problem.
Do you try to calibrate maybe help ?

npero

Don't need additional 750 device you can do that width existing devices add 750 in this configuration it is overkill.
You must better explain what do you want to achieve but from this point of view 750 is not needed.

npero

1.15 from today can add port name

.

npero

port number for IP Cloud?????? pptp TCP (IP Protocol 6) port 1723 + IP Protocol 47 GRE l2tp UDP (IP Protocol 17) port 1701 + IP Protocol 50 IPSec-ESP or IP Protocol 51 IPSec-AH ip > cloud > this is for the mikrotik ddns... From wiki When enabled '/ip cloud' will send encrypted UDP packets to port 1...

npero

Please post you wireless log.

I using 802.11 on DynDish for now almost five moths without any problem.

npero

Where you have PPPoE limit on client side or server side PPPoE connection ? /ip firewall filter add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related If you read wiki you will see add this on router disable some packet processing li...

npero

Go to the proxy setting and click reset HTML this will generate default error.html in files after that just replace with your own. You will see reset will make folder webproxy used for error html, web-proxy1 if I remember correctly is using for web proxy cache check but you can check in proxy settin...

npero

[
I can't find this, in 2,4 ghz device and not in 5,8 ghz (6.35rc10)
wireless-rep - added 802.11g/n only band;

802.11b or 802.11g is working on 2.4GHz not 5GHz look the wikipedia https://en.wikipedia.org/wiki/IEEE_802.11

npero

and press the button ,,Apply" in Quick Set Don't use quick set, using quick set you can connect to 802.11, nv2, nstreme, click Apply in Quick set YOU give permission RB to connect to any of these protocol, again if you don't want that don't use quick set. RB don't do does what she wants but do...

npero

*) wireless-rep - added support for wireless background scan; I see opportunity to make auto frequency mode to work in background active scanning for noise and some algorithm to choice best channel or to make report in background it will be nice to see both options. Now auto just scan when disable ...

npero

I will but I've been very busy lately and haven't had time to go search on how to enable advanced wireless log reporting. If you could post how to do this, it'd be appreciated. I've never had to enable it before. Normally the log already displays things like registration errors, poll time-outs, etc...

npero

Have you set ack-timing - "enable wireless in log", isn't it already by default? I can see wireless disconnection msgs, etc. when I try Nstreme, nothing even appears in log. Same as regular 802.11 Basic log is enabled not full log, add wireless into log to see full log it is very helpful ...

npero

Do you try to enable wireless in log and look log what is say ?

npero

Before some time I have some problem with 411AH only solution I find is working is to do netinstall, after that I have new web page.

I have couple 411AH only one have this problem.

http://wiki.mikrotik.com/wiki/Manual:Netinstall

npero

30-35Mbps very nice. In my flat on 2.4GHz because lots of interference from other device in neighborhood If I can get 20Mbps I am very happy. Of course look prevision post there lost of helpful information about channels, used chains... To get result near to 60Mbps you need to enable both chains on ...

npero

Look the specification http://routerboard.com/RB750r2 you device not have wireless interface it is Ethernet router without wireless interface. You can use hotspot function on Ethernet inerface some as on wireless just medium for connection is not wireless but cable. If you want router with wireless ...

npero

May problem is port 2 after sometime just stop powering. After off and on again working couple days. I don't understand why is disabled when power is set to on I ask support also but for now not have any answer. If I understand correctly on means always when is possible (no overload, on short circui...

npero

Some news v6

http://wiki.mikrotik.com/wiki/Manual:Th ... stallation

npero

I don't find solution for now but I usually only have problem with poe only on port 2.

npero

+1 also

npero

Yes some problem but usually happens only on port 2. I have on one place 260GSP use only 3,4,5 port for poe working for months without problem, on other place using port 2 basically every 15 days lost power is working more stable is check log cable. Without log cable checked more frequent lost power...

npero

Send it yesterday, ticket#2015081666000091, 6.31 kill 750UP after sometime best case reset by watchdog or just hung up :(, disabling wireless package also not working it is end up by kernel failure. SXT device and BaseBox seem to me not affected, lost one Groove52 but not have access to him to see w...

npero

Big WARRNING DO NOT upgrade 750UP I have problem on network after couple hours devices just crash some reset by watchdog some not.
I kill my network with this upgrade.

npero

750UP upgraded yesterday, today reset by watchdog, never before have that much problem with new release with simple configuration in this case 750UP is just poe switch. Never in last two years have that much problem with devices with simple configuration. Yes I know is my mistake to upgrade without ...

npero

Be very careful with this release now lost one wireless link with Groove52 not come back after update. Also on 750UP try it to disable wireless package also lost device but they reboot after couple minutes by him self with log message kernel failure but wireless not disabled. One 750GL every two min...

npero

After change profile for user to you disconnect user ?
If not you must disconnect user to reconnect and pick up new limit and everything is working.

npero

Any one have problem on 411U reading health menu ? I upgrade 411U to 6.28 health stop working. I need voltage it is only way to check battery. :( [admin@Jna AP] /system health> print action timed out - try again, if error continues contact MikroTik support and send a supout file (13) Also can't make...

npero

Just clean cache in you browser it is happens cleaning cache help in my case.

npero

Here is ti this code is working in 6.22, it is small modification from Mikrotik wiki. All credits to original author from wiki. :local NOIPUser "username" :local NOIPPass "password" :local WANInter "Interfacename" :global lastIP :local NOIPDomain "xxxx.no-ip.org&qu...

npero

Same problem here, seems to ip cloud server is down.

npero

System Health is not working on 411U, 411AH.
Upgrade continue

:
Edit:

Also on GrooveA-5Hn

npero

System Health is not working on 411U, 411AH in WinBox also terminal.
Send supout.rif to support.

npero

package UPS works only with APC? Or?

Reading documentation and forum UPS package only work with APC ups but all also some new models not working because change something in protocol.
Also can work if UPS emulate APC communication protocol.

npero

Try to add ups it is not need to seen in port if using usb ups. Only APC ups are supported. Here is picture from 750UP with APC Back-up 650 ups. What ROS? Version is 6.23 if you ask for ROS version. :) I have couple 750UP and also 411U and 433GL with working APC UPS usually use ACP Back-UPS 650 and...

npero

Try to add ups it is not need to seen in port if using usb ups.
Only APC ups are supported.

Here is picture from 750UP with APC Back-up 650 ups.

npero

You need this ONLY if router board is behind NAT not have external address on one of interfaces. If router board have external address then monitoring address change and update on change. If behind NAT then address not change and because of that need scripts to force update it is bug in software bec...

npero

Very clever, but you really think that I didn't test new version before I upgrade a critical router? I have tested it on 3 other Routerboards... there is all ok, but on this very important router it ***** everything. So next time please try to think before post some stupidity ;) kubik256 and visali...

npero

Why upgrade that critical router before testing by yourself on other non critical place ? I first upgrade my home MT router everything working then update non critical part of network and after that update critical part of network. I know people using today 2.9.27 or 3.30 or 4.17 or 5.26 or 6.22 and...

npero

No one can help you without more details. Export you config. Also consider update to version 6.xx because some thing are more optimized in 6.xx.

npero

Suggestion find computer with proper com port use null modem com cable to connect.
USB to com not working every time properly.

npero

Do you try to change frequency ?

npero

I have problem only on port 2, plugin device not that important and monitoring that device with ping with email if power is down switch to off and again to on and working. I have send couple screen shoot to support also replace device on port 2 and waiting solution from support. With 1.14 is working...

npero

Some here after 17 days up time something happens on port 2.

npero

2S is short of 2 stream it is mean using both antenna chain. 1S short of 1 stream using one antenna chain. SGI is short guard interval. From Wikipedia The standard symbol guard interval used in 802.11 OFDM is 0.8 μs. To increase data rate, 802.11n added optional support for a 0.4 μs guard interval. ...

npero

I also don't have problem on other ports just on port2.
11 days is maximum up time on port 2

, on other port for now have up time 12 days and counting but before on 1.13 also don't have problem on other ports.

npero

I only have problem with PoE on port 2 after update is much more stable. If you don't need all ports for PoE try use other ports.
On other switch also lost power after almost 11 days on port 2 just checked.

npero

I have two switch after update to 1.14 one lost power on port 2 after 5 days up time I see device on port 2 restart, now that device have 5 days up time after losing power. Other switch now have 10 days and 19 hours up time and all devices connected on it have some up time. For now I am satisfied wi...

npero

From support ask some question.

The "calibr" allows to manually force the
recalibration, it will ask to disconnect cable and return to auto mode after
webpage refreshing. It is not necessary to use it when the PoE works properly.

npero

Hi buzz!

Can you show us the screenshot or configuration of the schedule for Cloud IP?

I think my cloud IP is not updating.

Here is it screen shoot.

npero

Yes, problem is solved before couple version. If I remember in version 6.16.

npero

Janis is right it is nice power for home use, I have 951G and first thing I do when is install is to lower power to 12dB is quite enough to covert couple rooms in flat. I don't understand why people want high power device in they living or working rooms :shock:. Just thing using high power device gi...

npero

I use on all my places APC ups and Mikrotik UPS package to monitoring. Usually it is APC CS 650 connected to USB port on 750UP, 411U or 433GL on some places use APC Smart UPS 750 but connected to USB to serial converter because not have serial port on that location and directly connected ups on USB ...

npero

Contact support for 1.14rc test version if you expertise problem, but I thing final version will be release very soon.

npero

I also have two 260GSP updated to 1.14rc2 first one now have up time 8 days and 20 hours not losing power on port 2 also on port 4, second switch some up time but lost power on port 2 before 5 days, 3 days after update. For now I satisfied with result before never have up time 8 days on port 2 also ...

npero

if you are interested in trying out possible fix for the issue please write to support@mikrotik.com referring to this post/thread/issue. We will give you access to test firmware for RB260GSP I all ready receive from you 1.14beta2 Ticket#2014081466000195 I will test tomorrow morning and send you scr...

npero

Yes some problem I have on two 260GSP, port 2 also on my two RB260GSP, I write port 1 thing first POE port but on case and web it is port 2, some time on port 4 in my case lost power.

npero

we are working on the issue. Hopefully working solution will be ready soon.

Thanks for answer. I will wait sometime don't send back to RMA. If you need to test something I have two 260GSP in real network with this issue.

npero

Thanks very much.

If you need more information I send it you supout.rif before almost two weeks 30.6 with that problem Ticket#2014073066000442.

npero

ItsMe some problem here buy two 260GPS they or loosing power usually on port 1. Iswitch port 1 to on not auto its little help but today again lose power on port1 and need to off that on and power working again. My switch have report maximal load per port 130mA and much worst because by default port ...

npero

Or use normal dynamic dns service that works reliably as you want... Of course but what is reliably today, no-ip before couple weeks not working almost one week, other service what I am using not have possibility to change TTL, IP cloud is almost perfect scheduler resolve bug :D. Recommendation for...

npero

Buzz your are right IP Cloud have bug if you behind NAT not update IP address because not see address is changed, I all ready write support but no answer they say update every minutes but it is not true they update on change but if router behind NAT not see change and not update must click force upd...

npero

I am using wireless-fp on 3 411AH, 2 411U, one 411 and one 411A from version 6.13 now is updated to 6.18 no problem at all in older version have some time reboot because of kernel failure but after I thing 6.16 that bug is resolved. Card is R52n, R52nM and Compex WLM54G.

npero

Do you try what I write ? Do you try with other computer with Windows XP ?

npero

If you hear beep it is live :). Try different computer usually for netinstall I prefer Windows XP. Open netinstall enable net boot and enter ip for example 192.168.88.1 you MUST enter static adress in LAN card example 192.168.88.2 also disconect from wireless, pppoe all other connection, disable fir...

npero

Paste your firewall rules in input chain, that rules tested on five router and working.

Whet disable your input rules in filter it is working ?

npero

add chain=input comment=Cloud in-interface=WAN_interface protocol=udp src-port=15252

My rule for Cloud, also Normis send me name of server if you want to open all port to cloud server.

npero

what ros version this IP cloud features?

thanks

I thing from version 6.13 but use latest version 6.17 if your router don't have public address, because in 6.16/6.17 can use external address for update.

npero

I my network all devices is updated to 6.16 main router to 6.17. It is RB411AH, RB411, RB411U, RB433AH, RB433GL, Groove, SXTLite and main router x86, for now uptime is between 2 and 3 day I don't see any problem in my configuration. OpenVPN bug is solved I have open ticket for months for that bug no...

npero

I have two (separate) implementation: I reduced cpu timing and everything worked well for 4 hours. One of the RB411AR did not survive this experiment . I changed it for Metal and Metal works very good. I tried also RB333 and this unit also was restarting again and again Everything on software 6.15 ...

npero

I have couple of device with similar symptoms, if button not help to load backup boot loader usually processor is broken.

npero

Go to System Package mark wireless-fp and click on button enable. After that must go to System Reboot and after reboot package is active.

It was installed wireless-fp package.

How do it use Wireless-fp package?

npero

I have couple 750UP hottest have 72 other around 55 but today is very hot day usually temperature is lower. I thing on that with high temperature something is wrong with temperature sensor because from first day have higher temperature compare to other and on that is connected one 433AH and SXTlite....

npero

Yes it is ok.

npero

Check in wireless registration table signal strength change power to have signal between -50 to -60.
I thing on new devices like yours must use all rates fixed for settings tx power not default card rate but effect of this setting is visible on registration table.

npero

Thanks alot I change tx power from default to card rate = 8 Is this true ? And another question is about link configuration I setup one sxt as bridge and another one as station bridge But in some document says set on side as bridge and another Side station wds Could you plz whats difrence between t...

npero

hi everybody i have two sxt 5phnd and configured as point to point link but distance between two sxt is about 80 or 90 m should i decrease TX power ? and please advice me anythings that i should do thanks very much Yes it very short range decrease tx power to have signal between -50 and -60 in regi...

npero

Reset device to default if it is not new, plug in LAN cable go to http://192.168.88.1 use Quick set feature
http://wiki.mikrotik.com/wiki/Manual:Quickset

npero

What is new in RouterBOOT 3.16 ?
Before couple minutes update one 951G for test and also firmware.

npero

x86 UPS package not working, also try to uninstall UPS package and install again now log say package exist but I not see in package list, and in 6.14 on x86 don't have monitoring UPS now on 750UP is working. Also OpenVPN bridge bug not resolved. EDIT: Install fresh from CD image in Virtual Machine U...

npero

Why upgrading device with all package just use upgrade package http://download2.mikrotik.com/routeros/6.14/routeros-mipsbe-6.14.npk download upgrade and you can find regular end fp wireless package. I can't seem to find the "wireless-fp" package - am I missing something here? downloaded al...

npero

I use USB to serial adapter to connect serial UPS to RouterBoard. One place use FTDI usb to serial on other Prolific convert both working for connecting UPS for now not try anything else.

npero

Hello, I was implementation about this scenario : AP ( WDS ) --- AP ( WDS ) = Option 1 AP ( WDS ) --- Wds Slave = Option 2 This option have different function, I think speed is the some. AP (WDS) Option 1 allow client to connect to both AP, both AP must be at some channel. Wds slave allow to connec...

npero

Look here http://forum.mikrotik.com/viewtopic.php?f=2&t=85222 I thing you have some bug problem like as.

npero

I have same problem, contact support 24.3.2014. for now no answer on my ticket. Other thread about problem http://forum.mikrotik.com/viewtopic.php?f=2&t=85090

npero

Look here http://wiki.mikrotik.com/wiki/Manual:Sy ... al_Console

npero

Ulypka there is no such feature! It is not a bug! Windows doesn't support any tunnel bridging, it is RouterOS-to-RouterOS feature But in older version works :), also windows to windows work, also in my case only problem is MT device where is server other devices in bridged network work. Problem is ...

npero

rextended, I will check for the issue, and try to find out why it is not fixed yet.
And we will try to fix it at 6.14 version.

Check Ticket#2014032466000827 you have explanation how to try.

npero

Ulypka there is no such feature! It is not a bug! Windows doesn't support any tunnel bridging, it is RouterOS-to-RouterOS feature But in older version works :), also windows to windows work, also in my case only problem is MT device where is server other devices in bridged network work. Problem is ...

npero

Ovpn in the bridge is still not working :( interface ovpn-server server set mode=ethernet ppp profile set 0 bridge=bridge1 ROS in <6.8 works in ROS 6.8 6.9 6.10 6.11 6.12 6.13 not working Not tested in 6.13 but can confirm in older version bug is you can access to every device in network but not on...

npero

Is anyone have problem with hardware switch in 750UP. Configuration is simple 750UP on eth1 is routing other port are in switch group eth2 is master. Network configuration x86 -- LAN switch--- SxLite <<<>>>> Sxlite--eth2 750UP eth3 RH433AH(eth1) R52nM <<>>>>> x86 From x86 to x86 running UDP bandwidt...

npero

Download file from http://download2.mikrotik.com/routeros/ ... e-6.12.npk open WinBox open files and copy paste this file, after that restart device wait to upgrade if not then open log from winbox and take screen shoot attach here to see what happend.

npero

When copy 6.xx package and reset device look the log, paste log output here or screen shoot of log window from winbox.

npero

Normis what about Ticket#2014032466000827 almost one month pass no answer.

npero

No beep, no boot, no console output.
Hardware problem is someone have some experience with this type of failure what can be problem ?

npero

I have two boards with similar symptoms. First blue led shine led501-504 is also on but no boot, no console output. Second blue and green led on led501-504 on but no boot, no console output. It is hardware problem is anyone try to resolve similar failure what can be problem broken processor, ram, na...

npero

Ticket#2014032466000827 not fixed, it is not working in last couple version, also other user on forum confirm bug.
When it will be fixed ?

npero

Yes 6.11 but need to install separate wireless package look on download page http://www.mikrotik.com/download, also this is beta package installing disable regular wireless package but be careful switch back an do disabling this new package and must enable regular package to wireless work again also...

npero

Try to set hw. retries to 15 usually can help in this situation, also for nstreme can try different framer policy and framer limit or switch to nv2 work more stable on N wireless interface. Also you can try new wireless package but is beta for now I try on 23km p2p for now experience is very good if...

npero

Anyone can confirm this bug: 1. Not very important, upgrade to 6.11 Groove, SxLite, RB711, lost default LED indication for wireless signal strength. On RB411 try to add new LED, LED appears as unknown closing, open again new led windows in WinBox help to back to normal. 2. Before last couple version...

npero

Some problem but no rule some RB working some not, 433AH working, 433GL no, one Groove is ok other not. Solution: Winbox 1. Open clock 2. Select time zone manual click apply 3. Select back your time zone click apply 4. Click OK (must click ok ) Log time is now ok. Log shows events with GMT time, not...

npero

May i use ROS 6.10 in RB750 ?

Yes I used it on RB750 basic configuration no problem. For now up time is 15 days.

npero

Will try, thanks. But RB750UP is brand new upgraded to 6.10 and configured.

npero

Network configuration x86 -- LAN switch--- SxLite <<<400m nv2>>>> Sxlite--eth2 750UP eth3 RH433AH(eth1) R52nM <<1km>>> x86 RB750UP eht2 master port 3,4,5 slaves Running bandwidth test UDP from one to another x86 when reach more that 90Mbps eth3 on RB750 where is 433 connected go down test of course ...

npero

Check power supply, POE injector and UTP cable.

npero

Not comptabile if you are using 40Mhz mode on R52H. R52Hn not see signal 40Mhz mode on R52H, on other direction is working but using 20Mhz.

npero

I also don't have problem with 6.9. Simple configuration routing mark work, OpenVPN server, PPTP server work, PPPOE server with radius work. No problem for now, all network now running 6.9, x86, sxlite, groove, Rb433, Rb433AH, RB750, RB711. In upgrade process lost one x86 after upgrade log is full s...

npero

Any successful upgrades of the x86. I guess ROS 6.9 has issues understanding the hard disk. I upgrade x86 on them PPPOE server around 80 active PPPOE connection, radius authentication, NAT, OSPF, MPLS, VPLS not very complicated setup so far no problem. Up time: 21 hours for now Software 6.9 for The...

npero

I tried another RB as a client... All RB from our corporate network cann't connect to RB with OS 6.9 installed

I try to connect for one Rb750 to x86 OpenVPN both 6.9.
Yes disconnect your are right.

Solution select on OpenVPN client chipper and authenticate different from any then working.

npero

OpenVPN server doesn't work! Clients log off immediately after connection establishing. Downgrade to 6.7. I try to connect to OpenVPN on x86 after upgrade to 6.9 no problem. Using OpenVPN client in windows version 2.3.1. Also this x86 machine is PPPOE server with radius authentication and around 80...

npero

Do you try Reset HTML in web proxy? This option will create default html. Form wiki Customizing error pages To customize the page web proxy shows on error: [admin@MikroTik] > /ip proxy reset-html Current html pages will be lost! Reset anyway? [y/N] Answer 'y'. Now HTML files are accessible for editi...

npero

And what about strange OmniTik behavior, when device can boot up only if i try to reset it ???????

if you use the Reset button to power on (the button loads backup RouterBOOT).

Using reset button load backup bootloader.

npero

Must change framer policy and framer limit to have stable link.
Try with framer limit 3200 and try all framer polices, not have universal solution must try different setting for framer policy and framer limit to have stable link.

npero

Also you can try to use protocol nstreme some time I have better result on 802.11a links using nstreme. On client side for protocol set any, on AP side change to nstreme and in nstreme tab set framer policy and framer limit try this and test maybe you have better result. Framer policy: Extract size ...

npero

Do this add default and also frequency using on AP like this on picture.
Then try to switch to 40MHz.

scan.png

npero

Yes you can upgrade to v6. Because you using factory version of software don't show upgradable first time when you upgrade this will be show.
If you upgrade to 6.xx after that in upgradable field will be to v8.x.

npero

Check what client say in log. Go to system logging and add topic wireless after change to 40Mhz mode see log, in log you will see what client say usually that help to see what is problem. I do same thing do many link change from 20 to 40 usually problem is scan list or only need to change frequency ...

npero

Do you try to change channel ? When you do scan on client do you see signal from AP ?

npero

Check the scan list on station. Station will scan only channels in the scan list. Scan list in depend of frequency mode and selected country, superchannel mode allow you to use all frequencies in scan list. If you click on frequency field in WinBox on station you will see bold default scanning frequ...

npero

Yes because you are using v6.x.

npero

yes if the protocol mode is in rstp

Why need to to use rstp ? On all my devices protocol is none and also have S in bridge interface, of course we are talking about version 6.x ? In older version is different.

npero

I have the same question/problem. My wireless card is set to ap-bridge mode ( no wds...etc.) But when i check my interface it says "RS" (R-running, S-slave) Dont understand why my Wireless is marked as slave. RouterOS V6.7, RB751U-2HND Thanks Because your interfaces is in bridge, that's m...

npero

Contact Mikrotik support http://www.mikrotik.com/aboutus with serial number of device and soft-id only they can help you, your device lost licence.

npero

Check /system led look my picture.

npero

Try to remove this topic system,debug from logging.

npero

Here is picture, this TP-Link in my router working.

npero

I must check that x86 possible in Saturday when have access to that machine. I will send picture from card label.

npero

I have in one x86 Tp-Link TL-WN851N but don't know what version of card on some x86 TP-link miniPCI 802.11n card both work like R52n card witout any problem. I have only problem with TP-Link PCI-E card TL-WN881ND is work unstable. If if you need when I been on the field can open x86 and make photo o...

npero

You can use address list and web proxy for that purpose. In is little complicate but it work on my network, make two rules first to pass IP in address list and other to redirect to web proxy. Make page on web server setup web proxy to redirect everything to your page and also on page create link to ...

npero

Add in logging OpenVpn to see what happens. I use OpenVPN between two MT 6.6 and working also use from Windows client to MT 6.6 is working. Some time happens OpenVPN server just stop working, client don't what to connect reboot router work again. Try to reset router where is OpenVPN server, I have t...

npero

Nice release for killing x86 for now 3 router is dead and counting. One come back after 5 minutes reboot without proper shutdown and now working, two need to remove hdd reinstall and now working. Both x86 failed to update have some chipset on mainboard nForce 3, for that reason I replace one with I...

npero

Nice release for killing x86 for now 3 router is dead and counting.

npero

I don't exactly calculate my board have 128MB ram, I see OS use around 25MB put 80000 and any time I have around 20MB memory free and not have problem with memory watchdog.
Maybe try with some small values and rise it to see when watchdog is triggered if you have some RB easy accessible.

npero

I don't have experience with that boards I can't recommend settings sorry. I thing is problem related to watchdog memory limit and memory limit for proxy. On x86 never seen to happen this with unlimited work perfectly, by on RB make problem. Like I say before limit on 80000 on 951 never again see re...

npero

florinbro max-cache-size=unlimited for ip proxy should allow to use available RAM resources, but it should not lead to out of memory problem. Please send support output file to support (support@mikrotik.com) with current configuration (of if it possible with low amount of RAM left), we will investi...

npero

Limit memory usage in Web proxy this happen because web proxy use memory and trigger watch dog.
Don't use unlimited enter some value and problem is gone

.

npero

On AP or client just drop udp port 67-68 you can do that in bridge filter.

/interface bridge filter 
chain=forward action=drop in-interface=ether1 mac-protocol=ip dst-port=68 ip-protocol=udp 
chain=forward out-interface=ether1 action=drop mac-protocol=ip dst-port=68 ip-protocol=udp

npero

Is any solution to make 6.5 client connect without chipper I not need to secure line? You can set cipher and auth =none on client. In 6.4 is none upgrade 6.5 don't connect with none say auth and chipper not supported. Problem is related with bridge and chipper try to connect from 6.5 to 5.xx withou...

npero

Have problem with OpenVPN. I upgraded OpenVPN MT client to 6.5 and after change auth and chiper connect to 6.4 server but work slow and very strange. I can open web page on my server on other side, but WinBox try to connect and waiting after that disconnect. Can ping devices on other side, also can ...

npero

How you configure you RB433 and Sextant ? You have devices in different subnet please post routing table all address on all interfaces. Little strange you use external address for Sextant not local but ok.
Much more detail about configuration if you what someone to help you.

npero

I have TP-Link TL-WN851N work fine on one of mine sites. Now running 6.4 on x86.
I don't know what is difference between N and ND version.

When I have been on site can check hardware revision of PCI card.

npero

This is PCI-e x1 card not mini I used in x86 mainboard.
Try in some old board with nForce 4 chipset and also in mainboard with Intel chipset P35 some thing.

npero

In version 5.xx don't supported don't appear in interface list.
Try on the field work in AP mode if you not do scan.

6.3 some issues like 6.1 don't try for how in 6.4.

npero

*) ovpn - allow to specify server via dns name;

thanks!

Also thanks

npero

*) pptp, l2tp, sstp - allow to specify server via dns name;
Please add OpenVPN to that list. Seriously, that's just unfair for users.
pptp - insecure.
sstp - supported only in windows.
l2tp - requires ipsec+l2tp combo, hard to configure by user.
+1

+1

npero

Proxy, access list if you define source address don't working any more.
I have couple rules based on source address with deny redirect I been very surprised

when some IP just passed without redirecting or deny.

npero

If anyone try to use PCI-e card with AR9287 chipset please share your results. I buy TP-Link TL-WN881ND to test. First have very annoying bugs: 1. Do scan, scan couple signals and after that interface not working, solution restart router or change protocol from something to nv2 and not need to resta...

npero

Thanks Mikrotik update KILL my RB750.

RES button not working pushing it but LED not blink, ready for trash.

npero

Try to disable cache on disk, also Max cache size to none.
System NAND is for operating system not for proxy cache and it is slow, try with this settings.

Why you need proxy ?

npero

Wireless card AP mode stoppes after some hours. same with RB433 three wireless card ap stopped working i have to reboot. same RB411AR, RB433AH, RB411R and RB493G. I HAVE TO DOWNGRADE ALL OF THIS BOARDS Same situation, after a day or two stops traffic to users. I had to go back to v5.14 and everythi...

npero

Me looks like this is the dish is using in picture

http://www.voltplus.co.rs/Antene/P-seri ... 524P2.html

npero

Go to http://www.mikrotik.com/ and create account after create account you can obtain free licence.

Search found 319 matches