Community discussions

MikroTik App

Search found 321 matches

  • 1
  • 2
by npero
Sat Dec 23, 2023 12:06 am
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 257392

Re: v7.13 [stable] is released!

I update one pair of LHG 52ac and other pair LHG 5 ac XL, outdoor on link couple km, with new WifiWave2 drivers. First impression is working better in test have better speed, TX and RX rate are more stable. Bad thing Something is not right with signal strength, before update has been around -50 now ...
by npero
Sat Dec 16, 2023 8:54 am
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 257392

Re: v7.13 [stable] is released!

I want to try wifi package outdoor on LHG5 ac. I already try on indoor devices I missing two feature to try outdoor. First possibility to scan complete list of frequencies not just selected country, because outdoor has lots of devices and some of then, some is maybe wrong word here :) lots of then n...
by npero
Wed May 10, 2023 11:10 am
Forum: Announcements
Topic: v7.9 [stable] is released!
Replies: 242
Views: 54455

Re: v7.9 [stable] is released!

I have some problem on ax2 but after couple days, device not connected to WiFi in log say some type of authentication error something with PMKSA.
Reboot device and working again.
by npero
Thu Jun 30, 2022 8:15 am
Forum: Announcements
Topic: v7.3 and v7.3.1 [stable] is released!
Replies: 269
Views: 80246

Re: v7.3 and v7.3.1 [stable] is released!

Also can confirm for MikroTik S-85DLC05D on HEX S and PowerBox pro.
Downgrade to 6.48.6. working, back to 7.3.1 don't have any information about SFP module.
by npero
Tue Jul 21, 2020 7:12 am
Forum: Wireless Networking
Topic: w60g link stability and erratic rate selections since ROS 6.47
Replies: 24
Views: 7106

Re: w60g link stability and erratic rate selections since ROS 6.47

I using on two links it is seems to me less stable links, before I don't have disconnection for weeks after update to 6.47.1 have every 24-48h disconnections for one seconds it is not critical but seems to me less stable that has been before.
by npero
Tue Aug 06, 2019 11:13 pm
Forum: Announcements
Topic: Newsletter #90
Replies: 55
Views: 40411

Re: Newsletter #90

LHG XL 52 ac is dual band or dual card (interface) device ? Look like dual card for this paragraph in news y. You can easily setup the 5 GHz channel as the main one with speed up to 600 Mbps and use the 2.4 GHz channel as an automatic backup connection with speed up to 260 Mbps or use both connectio...
by npero
Wed Nov 21, 2018 9:19 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192031

Re: LHG 60G experience

Yes after two months first rain in Serbia but here it is light rain with little snow. With this new version is working great on my short link 240 and 340m with wAP i LHG no disconnect.
We will see on heavy rain or show when is happens, backup link is ready ;).
by npero
Fri Nov 09, 2018 7:09 am
Forum: RouterBOARD hardware
Topic: [PowerBox Pro] Devices won't reboot after system reboot
Replies: 1
Views: 1315

Re: [PowerBox Pro] Devices won't reboot after system reboot

Yes it possible seem to me poe controller is separate chip just controlled by main processor, resetting just reset main processor but not interfere with poe controller, It is nice feature if you upgrade 960 not lose power on port, I like this feature. If you want to power off and power on device con...
by npero
Fri Nov 02, 2018 8:57 am
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 50775

Re: v6.43.4 [stable] is released!

Some problem but with 960GSP just regular restart by watchdog every 4 days in old version 6.42.xx have uptime 100day and more, support give me generic answer netinstall to last version and if happens again send again supout.rif. Also have PowerBox Pro for now only one watchdog restart after update t...
by npero
Mon Oct 15, 2018 10:32 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 622
Views: 162975

Re: ARM devices and NV2 protocol

you've got an e-mail
I send you replay but did not receive any mail from you after that.
by npero
Thu Oct 11, 2018 8:07 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 622
Views: 162975

Re: ARM devices and NV2 protocol

I am interested to buy it. Please can your left email or contact me on npero2(at)gmail(dot)com I have some used LHGac, SXTsq ac, we took down in the last weeks, because of unsolved problems with ARM Boards, if someone want to get them, feel free to ask, otherwise we throw them away. mistry7 weird, n...
by npero
Sat Sep 22, 2018 10:22 am
Forum: RouterBOARD hardware
Topic: RB333
Replies: 3
Views: 1799

Re: RB333

Use NetInstall to reinstall RouterOS they will give you another I thing 72h or 48h hours working time to enter licence. They counting time only when working.
For licence make supout.rif and send to support they will generate licence for that board without time limit.
by npero
Tue Aug 07, 2018 8:32 am
Forum: Wireless Networking
Topic: WAP-60G-AP & LHGG60G Combo?
Replies: 4
Views: 1682

Re: WAP-60G-AP & LHGG60G Combo?

I have two link that combination but PtP links, one wAP60G LHG60G distance 233m and other link distance 313m. In very heavy rain have disconnection, on middle rain disconnect for couple second, now using 6.42.6 see in rc have changes maybe that can help not try for now. Before on 233m link using two...
by npero
Thu Jul 12, 2018 10:40 am
Forum: Announcements
Topic: Winbox v3.16 released!
Replies: 62
Views: 60043

Re: Winbox v3.16 released!

Confirm some problem.
by npero
Tue Jul 10, 2018 11:05 am
Forum: RouterBOARD hardware
Topic: Powerbox Pro Grounding
Replies: 12
Views: 6425

Re: Powerbox Pro Grounding

Some question. Do we need to ground cable separately or have some type of varistor or similar between utp ports and ground and not need to ground cable ?
by npero
Tue Jul 10, 2018 11:01 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93132

Re: wAP 60G experience

The cable must ti oriented down, rotate you device that cable is down, in that case not need any other method to make it water proof. Mounting like on picture is just mater of time when water or condensed water will fill up case and fry electronic inside. MUST BE installed vertically if you need to ...
by npero
Thu Jul 05, 2018 1:36 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222308

Re: v6.43rc [release candidate] is released!

wAP60G 240m link updated from rc32 to rc42, client not connecting any more in scan see signal but not connecting, back to 6.42.5 it is working again, but seem to me it is not stable as has been in 6.42.1. Also please check scan for frequency 64800 seems to me it is not scanning that frequency when c...
by npero
Sat Jun 02, 2018 7:23 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222308

Re: v6.43rc [release candidate] is released!

Based on mrz suggestions I changed API to work with old and new login style. if ($this->socket) { socket_set_timeout($this->socket, $this->timeout); // RouterOS >= 6.43 $this->write('/login', false); $this->write('=name=' . $login, false); $this->write('=password=' . $password); $RESPONSE = $this->r...
by npero
Fri May 25, 2018 9:13 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93132

Re: wAP 60G experience

Look viewtopic.php?f=21&t=133420&start=100#p663507 at the end of post say need to use new Winbox 3.14 in rc17.
by npero
Tue Apr 17, 2018 7:35 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93132

Re: wAP 60G experience

On what ROS? Newest r59 or 6.41.4? There are same wAP60G link without any our shields etc? rb56 for now, planing upgrade to final version in Friday. Just wAP60G unit from Wire kit package without anything. Also today is raining have some link drops but they has been just for 1s that say in log.
by npero
Thu Apr 12, 2018 6:51 pm
Forum: Announcements
Topic: Significant improvement for 60 GHz solutions
Replies: 45
Views: 41459

Re: Significant improvement for 60 GHz solutions

You can do it that now just run script in scheduler read RSSI or signal and disable or enable port in bridge or whatever you wont it is possible now with script run in scheduler.
by npero
Thu Apr 12, 2018 5:22 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 537
Views: 189405

Re: v6.42rc [release candidate] is released!

interface w60g monitor wlan60-1 Just replace wlan60-1 with your interface name they will give it something like this connected: yes frequency: 58320 remote-address: 04:xxxxxx mcs: 4 signal: 40 rssi: -68 tx-sector: 28 tx-sector-info: left 3.8 degrees, down 3.8 degrees rx-sector: 96
by npero
Thu Apr 12, 2018 8:44 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93132

Re: wAP 60G experience

wAP 60G by the google maps 238m distance. In good weather condition mcs: 4 signal: 40 rssi: -70 tx-sector: 28 tx-sector-info: left 3.8 degrees, down 3.8 degrees rx-sector: 96 In btest UDP have 600-800Mbps also have half hour with rain speed drop to 100Mbps in test. For now wating rain again to see r...
by npero
Thu Apr 05, 2018 9:53 am
Forum: General
Topic: MUM berlin
Replies: 28
Views: 5690

Re: MUM berlin

by npero
Thu Mar 30, 2017 9:54 am
Forum: RouterBOARD hardware
Topic: MUM Europe 2017: new hardware incoming!
Replies: 86
Views: 30450

Re: MUM Europe 2017: new hardware incoming!

Live stream will be nice :).

Edit:

https://www.youtube.com/watch?v=zv54GidX0qQ

THANKS
by npero
Tue Mar 14, 2017 7:50 am
Forum: Wireless Networking
Topic: Repleace RB911G Sextant with RB911AC
Replies: 6
Views: 1873

Re: Repleace RB911G Sextant with RB911AC

Grid antenna have only one polarization it will work worst that SEXTANT from my experience. One solution you can try is to replace only board in the SEXTANT, open SEXTATNT and replace board with RB911G-5HPacD I try this and replacing give me little better signal because new board have higher rf powe...
by npero
Tue Feb 28, 2017 7:52 am
Forum: Announcements
Topic: v6.38.3 [current]
Replies: 63
Views: 27254

Re: v6.38.3 [current]

If you have bridge just disable rstp and DHCP server will work again.
by npero
Mon Jan 09, 2017 8:30 pm
Forum: General
Topic: x86 - immediately "demo licence expired" on first boot
Replies: 10
Views: 4347

Re: x86 - immediately "demo licence expired" on first boot

Yes, I expired some problem in VirtualBox also try VMWare something, also contact support for now only solution is if you use virtual machine to install select x64 system in virtual machine after that CHR image working with free licnce. I try x86 iso and CHR image on x86 and try to paste licence aft...
by npero
Fri Nov 18, 2016 3:25 pm
Forum: Announcements
Topic: New features in Dude RC
Replies: 22
Views: 17716

Re: New features in Dude RC

Thanks, I don't try to click on map name in table :) it is working.
by npero
Fri Nov 18, 2016 9:47 am
Forum: Announcements
Topic: New features in Dude RC
Replies: 22
Views: 17716

Re: New features in Dude RC

Anyone know how to make
- Maps are viewable in web mode ??

I look on wiki but I don't have that option in rc31.
Thanks.
by npero
Wed Oct 26, 2016 12:54 pm
Forum: RouterBOARD hardware
Topic: RB750Gr3 - Report and questions
Replies: 113
Views: 52639

Re: RB750Gr3 - Report and questions

CPU/IPsec performance looks great, missing switch features doesn't. Cancelled my order today because of this :'(
What's new in 6.38rc19 (2016-Oct-24 11:19):

*) winbox - fixed missing switch menu for mmips devices;
by npero
Tue Oct 11, 2016 8:02 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 122425

Re: RE: Re: v6.38rc [release candidate] is released

What's new in 6.38rc12 (2016-Oct-11 10:35):

*) health - show power consumption on devices which has voltage and current monitor;
.
Could you be more specific?
I thing in devices where have voltage and current sensor they just do P=U * I
by npero
Wed Oct 05, 2016 8:16 am
Forum: RouterBOARD hardware
Topic: New CPU - new product RB750Gr3 - RB750G family - now mmips
Replies: 180
Views: 98013

Re: New CPU - new product RB750Gr3 - RB750G family - now mmips

I see announcement on Russia MUM here is ti https://youtu.be/NjDdq3O6VoM?t=1339 before couple days.
Look the video they have on slide speed test.
by npero
Mon Sep 26, 2016 8:52 am
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 67369

Re: v6.37 [current] is released!

After the update on x86 (from 6.36.3) wireless package turn to disable and you can not ENABLE.
(Check on 2 systems Alix board and PC)
Just to confirm some problem here on x86, after downgrade lost wireless configuration, supout.rif sent to support.
by npero
Tue Sep 20, 2016 6:52 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 320
Views: 102489

Re: v6.37rc [release candidate] is released, only one wireless package!

Both primary-ntp and secondary-ntp require an IP address. Do you maybe using ntp package ? With ntp package system ntp client set enabled mode primary-ntp secondary-ntp without system ntp client set enabled primary-ntp secondary-ntp server-dns-names if you don't need ntp server don't have any reaso...
by npero
Mon Aug 22, 2016 12:46 pm
Forum: General
Topic: Using RB260GSP to power up DynaDish5 with POE
Replies: 4
Views: 1606

Re: Using RB260GSP to power up DynaDish5 with POE

No problem at all I using on two places 260GSP powering DynDish it is working for I while.
Of course on 260GSP is connected more device on frist one 2xBaseBox and LHG5 on second plus two more 911ac it is workiign no rpoblem at all after firmware 1.16.

If you buy 260GSP update to 1.16 or new version.
by npero
Fri Aug 19, 2016 1:14 pm
Forum: General
Topic: Feature request - ModBus support
Replies: 10
Views: 5819

Re: Feature request - ModBus support

You can install OPC server that support SNMP from any manufacture not limited for some software company because OPC is standard, any SCADA system today must support reading information from OPC server. I personally don't like ModBus, I am Simens guy like ProfiBus, ProfiNet :) there is lot of protoco...
by npero
Fri Aug 19, 2016 11:05 am
Forum: General
Topic: Feature request - ModBus support
Replies: 10
Views: 5819

Re: Feature request - ModBus support

For example Siemens WinCC support SNMP using OPC, you can read data from Mikrotik using SNMP, also other SCADA software can do the some. Just type in google SNMP OPC server, enable SNMP on Mikrotik and rest is on your SCADA software or OPC server to support read data by SNMP. The OPC Server for SNMP...
by npero
Wed Aug 17, 2016 7:29 am
Forum: Wireless Networking
Topic: Client Background wireless scan
Replies: 24
Views: 16913

Re: Client Background wireless scan

Client is connected run scan it is working ;)
by npero
Tue Aug 16, 2016 12:08 pm
Forum: Wireless Networking
Topic: Client Background wireless scan
Replies: 24
Views: 16913

Re: Client Background wireless scan

They all ready have background scan if using wireless-rep package

also for detail manual how to use read http://wiki.mikrotik.com/index.php?titl ... eless#Scan
by npero
Sun Jul 31, 2016 5:39 pm
Forum: The Dude
Topic: solve db in 6.36
Replies: 3
Views: 1648

Re: solve db in 6.36

It is simple, database from new version 6.37rc is not compatible width old version.
Look here http://forum.mikrotik.com/viewtopic.php ... 24#p549840
Downgrade to older versions wont be possible from v6.37. 
by npero
Sat Jul 30, 2016 6:34 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 320
Views: 102489

Re: v6.37rc [release candidate] is released, only one wireless package!

!) wireless - DFS option is removed and forced to "dfs=radar-detect"; I have replaced all ubnt radios with mikrotik because of this. Now I will stick to 6.36. There is a 10min wait time in 5600-5650Mhz and 30min wait time if radar detected.  Good luck! I not try yet, but if change mode to...
by npero
Sun Jul 24, 2016 7:54 am
Forum: Wireless Networking
Topic: using LHG for long range....
Replies: 7
Views: 2399

Re: using LHG for long range....

Yes I thing, why because SEXTANT have gigabit ports but 18km is to much it will have low signal and in that case gigabit port have no effect. With LHG you will have almost some signal because they have higher gain antenna and lower output power at the and they only one thing left price.  My opinion ...
by npero
Sun Jul 24, 2016 6:51 am
Forum: Wireless Networking
Topic: using LHG for long range....
Replies: 7
Views: 2399

Re: using LHG for long range....

Buy and try it, I buy for test my impression is compare performance and price is nice, not nice but very very nice. It is not best, but price killing, dual chain 802.11n 5GHz, nice antenna gain, 100Mbit Ethernet, again dual chain give you possibility with lower signal to have 100mbit transfer what i...
by npero
Fri Jul 22, 2016 9:18 pm
Forum: RouterBOARD hardware
Topic: hAP lite housing
Replies: 21
Views: 6901

Re: hAP lite housing

You are right lots of distributor have TC version new version with vertical cast but some of them have also classic version without TC for almost some price. This pop up in search https://www.i4wifi.eu/index.php?stoken=64C7F918&force_sid=&lang=1&cl=search&searchparam=941&AndOr=an...
by npero
Fri Jul 22, 2016 8:09 pm
Forum: RouterBOARD hardware
Topic: hAP lite housing
Replies: 21
Views: 6901

Re: hAP lite housing

They are producing both version new and old when ordering ask for hAP lite classic that is old version.

http://routerboard.com/RB941-2nD
by npero
Sun Jul 17, 2016 7:36 am
Forum: RouterBOARD hardware
Topic: hAP ac (and some other new rotuers) too small flash
Replies: 62
Views: 26388

Re: hAP ac (and some other new rotuers) too small flash

Go to package click on wireless-fp then click uninstall some thing on wireless-cm2 reboot device using system reboot command. When is go back upload wireless-rep reboot and you have enabled wireless-rep package. Warring this must be performed when you are using LAN because uninstalling wireless. Or ...
by npero
Mon Jul 04, 2016 12:28 pm
Forum: The Dude
Topic: The Dude, v6.36rc test builds.
Replies: 112
Views: 32770

Re: The Dude, v6.36rc test builds.

Username and password now integrated with user management in ros, you need to use username and password using log into router. dont understand what you mean... Im trying to login dude server via dude client and its says me wrong username and password. You dude server is on Mikrotik is it service on...
by npero
Mon Jul 04, 2016 11:17 am
Forum: The Dude
Topic: The Dude, v6.36rc test builds.
Replies: 112
Views: 32770

Re: The Dude, v6.36rc test builds.

Username and password now integrated with user management in ros, you need to use username and password using log into router.
by npero
Thu Jun 30, 2016 2:47 pm
Forum: General
Topic: IP/Cloud on a router with multiple channels
Replies: 1
Views: 1079

Re: IP/Cloud on a router with multiple channels

Just add to scheduler command to force update to some time interval I usually add 3 or 5 minutes.
by npero
Tue Jun 28, 2016 12:35 pm
Forum: RouterBOARD hardware
Topic: RB960PGS
Replies: 3
Views: 3053

Re: RB960PGS

Hi,

What is this Device:

RB960PGS

Mistry7
Most likely HEX Poe, POE, 5 Gigabit ports no wireless looks like that.
by npero
Thu May 19, 2016 12:13 pm
Forum: SwOS
Topic: POE issue port 2 v1.15
Replies: 3
Views: 3664

Re: POE issue port 2 v1.15

For me update to 1.15 resolve that problem.
Do you try to calibrate maybe help ?
by npero
Fri Apr 29, 2016 2:44 pm
Forum: Wireless Networking
Topic: WISP Base Station design
Replies: 2
Views: 1397

Re: WISP Base Station design

Don't need additional 750 device you can do that width existing devices add 750 in this configuration it is overkill.
You must better explain what do you want to achieve but from this point of view 750 is not needed.
by npero
Mon Apr 25, 2016 3:04 pm
Forum: SwOS
Topic: Feature Request - Name Ports
Replies: 24
Views: 10420

Re: Feature Request - Name Ports

1.15 from today can add port name :) .
by npero
Tue Apr 12, 2016 10:55 am
Forum: RouterBOARD hardware
Topic: Port forward for ip cloud, pptp & l2tp...
Replies: 3
Views: 3071

Re: Port forward for ip cloud, pptp & l2tp...

port number for IP Cloud?????? pptp TCP (IP Protocol 6) port 1723 + IP Protocol 47 GRE l2tp UDP (IP Protocol 17) port 1701 + IP Protocol 50 IPSec-ESP or IP Protocol 51 IPSec-AH ip > cloud > this is for the mikrotik ddns... From wiki When enabled '/ip cloud' will send encrypted UDP packets to port 1...
by npero
Wed Apr 06, 2016 10:31 am
Forum: Wireless Networking
Topic: Dynadish - no 802.11?
Replies: 6
Views: 2111

Re: Dynadish - no 802.11?

Please post you wireless log.

I using 802.11 on DynDish for now almost five moths without any problem.
by npero
Sat Apr 02, 2016 8:27 am
Forum: General
Topic: PPPoE rate limiting bug
Replies: 3
Views: 3106

Re: PPPoE rate limiting bug

Where you have PPPoE limit on client side or server side PPPoE connection ? /ip firewall filter add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related If you read wiki you will see add this on router disable some packet processing li...
by npero
Wed Feb 17, 2016 5:40 pm
Forum: General
Topic: Web Proxy customization error page
Replies: 3
Views: 3222

Re: Web Proxy customization error page

Go to the proxy setting and click reset HTML this will generate default error.html in files after that just replace with your own. You will see reset will make folder webproxy used for error html, web-proxy1 if I remember correctly is using for web proxy cache check but you can check in proxy settin...
by npero
Wed Feb 17, 2016 7:59 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177834

Re: v6.35rc [release candidate] is released, new wireless package!

[
I can't find this, in 2,4 ghz device and not in 5,8 ghz (6.35rc10)
wireless-rep - added 802.11g/n only band;

802.11b or 802.11g is working on 2.4GHz not 5GHz look the wikipedia https://en.wikipedia.org/wiki/IEEE_802.11
by npero
Thu Feb 04, 2016 11:27 am
Forum: Wireless Networking
Topic: mikrotik station does what she wants!!!!!!!!!!!!
Replies: 5
Views: 1332

Re: mikrotik station does what she wants!!!!!!!!!!!!

and press the button ,,Apply" in Quick Set Don't use quick set, using quick set you can connect to 802.11, nv2, nstreme, click Apply in Quick set YOU give permission RB to connect to any of these protocol, again if you don't want that don't use quick set. RB don't do does what she wants but do...
by npero
Sat Jan 30, 2016 12:23 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177834

Re: v6.35rc is released, new wireless package!

*) wireless-rep - added support for wireless background scan; I see opportunity to make auto frequency mode to work in background active scanning for noise and some algorithm to choice best channel or to make report in background it will be nice to see both options. Now auto just scan when disable ...
by npero
Wed Jan 13, 2016 8:14 am
Forum: Wireless Networking
Topic: Mikrotik AC PtP - Nstreme will NOT connect at all but NV2 will???
Replies: 61
Views: 16689

Re: Mikrotik AC PtP - Nstreme will NOT connect at all but NV2 will???

I will but I've been very busy lately and haven't had time to go search on how to enable advanced wireless log reporting. If you could post how to do this, it'd be appreciated. I've never had to enable it before. Normally the log already displays things like registration errors, poll time-outs, etc...
by npero
Tue Jan 12, 2016 8:16 am
Forum: Wireless Networking
Topic: Mikrotik AC PtP - Nstreme will NOT connect at all but NV2 will???
Replies: 61
Views: 16689

Re: Mikrotik AC PtP - Nstreme will NOT connect at all but NV2 will???

Have you set ack-timing - "enable wireless in log", isn't it already by default? I can see wireless disconnection msgs, etc. when I try Nstreme, nothing even appears in log. Same as regular 802.11 Basic log is enabled not full log, add wireless into log to see full log it is very helpful ...
by npero
Mon Jan 11, 2016 5:44 pm
Forum: Wireless Networking
Topic: Mikrotik AC PtP - Nstreme will NOT connect at all but NV2 will???
Replies: 61
Views: 16689

Re: Mikrotik AC PtP - Nstreme will NOT connect at all but NV2 will???

Do you try to enable wireless in log and look log what is say ?
by npero
Thu Jan 07, 2016 9:06 am
Forum: General
Topic: old RB433AH upgrade to 6.33.3 but old page still showned
Replies: 1
Views: 1266

Re: old RB433AH upgrade to 6.33.3 but old page still showned

Before some time I have some problem with 411AH only solution I find is working is to do netinstall, after that I have new web page.

I have couple 411AH only one have this problem.

http://wiki.mikrotik.com/wiki/Manual:Netinstall
by npero
Tue Jan 05, 2016 1:18 pm
Forum: Wireless Networking
Topic: Slow wifi speed compared to wired (30Mbps vs 60Mbps)
Replies: 5
Views: 6061

Re: Slow wifi speed compared to wired (30Mbps vs 60Mbps)

30-35Mbps very nice. In my flat on 2.4GHz because lots of interference from other device in neighborhood If I can get 20Mbps I am very happy. Of course look prevision post there lost of helpful information about channels, used chains... To get result near to 60Mbps you need to enable both chains on ...
by npero
Mon Jan 04, 2016 11:36 am
Forum: Wireless Networking
Topic: No Wireless Interface at RouterBOARD 750 r2
Replies: 1
Views: 2979

Re: No Wireless Interface at RouterBOARD 750 r2

Look the specification http://routerboard.com/RB750r2 you device not have wireless interface it is Ethernet router without wireless interface. You can use hotspot function on Ethernet inerface some as on wireless just medium for connection is not wireless but cable. If you want router with wireless ...
by npero
Wed Dec 02, 2015 6:40 pm
Forum: SwOS
Topic: RB260GSp SWOS Issues v1.14
Replies: 7
Views: 4998

Re: RB260GSp SWOS Issues v1.14

May problem is port 2 after sometime just stop powering. After off and on again working couple days. I don't understand why is disabled when power is set to on I ask support also but for now not have any answer. If I understand correctly on means always when is possible (no overload, on short circui...
by npero
Fri Nov 27, 2015 8:20 pm
Forum: SwOS
Topic: RB260GSp SWOS Issues v1.14
Replies: 7
Views: 4998

Re: RB260GSp SWOS Issues v1.14

I don't find solution for now but I usually only have problem with poe only on port 2.
by npero
Mon Oct 19, 2015 9:28 am
Forum: SwOS
Topic: Feature Request - Name Ports
Replies: 24
Views: 10420

Re: Feature Request - Name Ports

+1 also
by npero
Tue Sep 15, 2015 6:48 pm
Forum: RouterBOARD hardware
Topic: RB260GSP sporadic PoE Issue
Replies: 8
Views: 4209

Re: RB260GSP sporadic PoE Issue

Yes some problem but usually happens only on port 2. I have on one place 260GSP use only 3,4,5 port for poe working for months without problem, on other place using port 2 basically every 15 days lost power is working more stable is check log cable. Without log cable checked more frequent lost power...
by npero
Mon Aug 17, 2015 10:08 am
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 77989

Re: 6.31 released

Send it yesterday, ticket#2015081666000091, 6.31 kill 750UP after sometime best case reset by watchdog or just hung up :(, disabling wireless package also not working it is end up by kernel failure. SXT device and BaseBox seem to me not affected, lost one Groove52 but not have access to him to see w...
by npero
Sun Aug 16, 2015 3:07 pm
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 77989

Re: 6.31 released

Big WARRNING DO NOT upgrade 750UP I have problem on network after couple hours devices just crash some reset by watchdog some not.
I kill my network with this upgrade.
by npero
Sun Aug 16, 2015 12:17 pm
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 77989

Re: 6.31 released

750UP upgraded yesterday, today reset by watchdog, never before have that much problem with new release with simple configuration in this case 750UP is just poe switch. Never in last two years have that much problem with devices with simple configuration. Yes I know is my mistake to upgrade without ...
by npero
Sat Aug 15, 2015 7:44 pm
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 77989

Re: 6.31 released

Be very careful with this release now lost one wireless link with Groove52 not come back after update. Also on 750UP try it to disable wireless package also lost device but they reboot after couple minutes by him self with log message kernel failure but wireless not disabled. One 750GL every two min...
by npero
Mon Jul 13, 2015 10:33 am
Forum: General
Topic: My Mikrotik RB450 Can't Manage PPPoE User's Bandwidth. Can Anyone Solve The Issue?
Replies: 3
Views: 1287

Re: My Mikrotik RB450 Can't Manage PPPoE User's Bandwidth. Can Anyone Solve The Issue?

After change profile for user to you disconnect user ?
If not you must disconnect user to reconnect and pick up new limit and everything is working.
by npero
Sat Apr 25, 2015 11:34 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 92667

Re: RouterOS v6.28 released

Any one have problem on 411U reading health menu ? I upgrade 411U to 6.28 health stop working. I need voltage it is only way to check battery. :( [admin@Jna AP] /system health> print action timed out - try again, if error continues contact MikroTik support and send a supout file (13) Also can't make...
by npero
Mon Mar 09, 2015 9:20 pm
Forum: SwOS
Topic: RB260GSP, but PoE options missing from web GUI
Replies: 15
Views: 9390

Re: RB260GSP, but PoE options missing from web GUI

Just clean cache in you browser it is happens cleaning cache help in my case.
by npero
Thu Feb 05, 2015 11:01 am
Forum: General
Topic: Did we loose IP cloud?
Replies: 155
Views: 41471

Re: Did we loose IP cloud?

Here is ti this code is working in 6.22, it is small modification from Mikrotik wiki. All credits to original author from wiki. :local NOIPUser "username" :local NOIPPass "password" :local WANInter "Interfacename" :global lastIP :local NOIPDomain "xxxx.no-ip.org&qu...
by npero
Thu Feb 05, 2015 9:16 am
Forum: General
Topic: Did we loose IP cloud?
Replies: 155
Views: 41471

Re: Did we loose IP cloud?

Same problem here, seems to ip cloud server is down.
by npero
Thu Feb 05, 2015 8:54 am
Forum: General
Topic: RouterOS v6.26!
Replies: 69
Views: 32986

Re: RouterOS v6.26!

System Health is not working on 411U, 411AH.
Upgrade continue :):
Edit:

Also on GrooveA-5Hn
by npero
Thu Feb 05, 2015 8:03 am
Forum: General
Topic: RouterOS v6.26!
Replies: 69
Views: 32986

Re: RouterOS v6.26!

System Health is not working on 411U, 411AH in WinBox also terminal.
Send supout.rif to support.
by npero
Tue Dec 23, 2014 10:10 am
Forum: General
Topic: RB750up USB port not working for UPS
Replies: 8
Views: 3339

Re: RB750up USB port not working for UPS

package UPS works only with APC? Or?
Reading documentation and forum UPS package only work with APC ups but all also some new models not working because change something in protocol.
Also can work if UPS emulate APC communication protocol.
by npero
Tue Dec 23, 2014 8:29 am
Forum: General
Topic: RB750up USB port not working for UPS
Replies: 8
Views: 3339

Re: RB750up USB port not working for UPS

Try to add ups it is not need to seen in port if using usb ups. Only APC ups are supported. Here is picture from 750UP with APC Back-up 650 ups. What ROS? Version is 6.23 if you ask for ROS version. :) I have couple 750UP and also 411U and 433GL with working APC UPS usually use ACP Back-UPS 650 and...
by npero
Mon Dec 22, 2014 10:38 pm
Forum: General
Topic: RB750up USB port not working for UPS
Replies: 8
Views: 3339

Re: RB750up USB port not working for UPS

Try to add ups it is not need to seen in port if using usb ups.
Only APC ups are supported.

Here is picture from 750UP with APC Back-up 650 ups.
by npero
Mon Dec 15, 2014 10:36 am
Forum: General
Topic: IP Cloud
Replies: 112
Views: 86158

Re: IP Cloud

You need this ONLY if router board is behind NAT not have external address on one of interfaces. If router board have external address then monitoring address change and update on change. If behind NAT then address not change and because of that need scripts to force update it is bug in software bec...
by npero
Fri Nov 21, 2014 9:01 am
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 71145

Re: 6.22 released!

Very clever, but you really think that I didn't test new version before I upgrade a critical router? I have tested it on 3 other Routerboards... there is all ok, but on this very important router it ***** everything. So next time please try to think before post some stupidity ;) kubik256 and visali...
by npero
Fri Nov 14, 2014 5:17 pm
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 71145

Re: 6.22 released!

Why upgrade that critical router before testing by yourself on other non critical place ? I first upgrade my home MT router everything working then update non critical part of network and after that update critical part of network. I know people using today 2.9.27 or 3.30 or 4.17 or 5.26 or 6.22 and...
by npero
Fri Nov 14, 2014 1:05 pm
Forum: General
Topic: high CPU utilization RB2011L (100%CPU)
Replies: 6
Views: 2607

Re: high CPU utilization RB2011L (100%CPU)

No one can help you without more details. Export you config. Also consider update to version 6.xx because some thing are more optimized in 6.xx.
by npero
Mon Nov 03, 2014 7:36 pm
Forum: RouterBOARD hardware
Topic: RB1200 not booting correctly
Replies: 3
Views: 1635

Re: RB1200 not booting correctly

Suggestion find computer with proper com port use null modem com cable to connect.
USB to com not working every time properly.
by npero
Fri Oct 31, 2014 10:36 am
Forum: Wireless Networking
Topic: Low TCP throughput SXt5HPACD
Replies: 16
Views: 3639

Re: Low TCP throughput SXt5HPACD

Do you try to change frequency ?
by npero
Sat Oct 25, 2014 12:28 pm
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

I have problem only on port 2, plugin device not that important and monitoring that device with ping with email if power is down switch to off and again to on and working. I have send couple screen shoot to support also replace device on port 2 and waiting solution from support. With 1.14 is working...
by npero
Tue Oct 14, 2014 1:30 pm
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

Some here after 17 days up time something happens on port 2.
by npero
Sat Oct 11, 2014 10:07 pm
Forum: Wireless Networking
Topic: Explanation: 180Mbps-40Mhz/2S/SGI
Replies: 2
Views: 11436

Re: Explanation: 180Mbps-40Mhz/2S/SGI

2S is short of 2 stream it is mean using both antenna chain. 1S short of 1 stream using one antenna chain. SGI is short guard interval. From Wikipedia The standard symbol guard interval used in 802.11 OFDM is 0.8 μs. To increase data rate, 802.11n added optional support for a 0.4 μs guard interval. ...
by npero
Thu Sep 18, 2014 4:42 pm
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

I also don't have problem on other ports just on port2.
11 days is maximum up time on port 2 :D, on other port for now have up time 12 days and counting but before on 1.13 also don't have problem on other ports.
by npero
Wed Sep 17, 2014 10:58 pm
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

I only have problem with PoE on port 2 after update is much more stable. If you don't need all ports for PoE try use other ports.
On other switch also lost power after almost 11 days on port 2 just checked.
by npero
Wed Sep 17, 2014 11:47 am
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

I have two switch after update to 1.14 one lost power on port 2 after 5 days up time I see device on port 2 restart, now that device have 5 days up time after losing power. Other switch now have 10 days and 19 hours up time and all devices connected on it have some up time. For now I am satisfied wi...
by npero
Tue Sep 09, 2014 8:22 pm
Forum: SwOS
Topic: RB260GSP POE Calibrate
Replies: 1
Views: 3246

Re: RB260GSP POE Calibrate

From support ask some question.
The "calibr" allows to manually force the
recalibration, it will ask to disconnect cable and return to auto mode after
webpage refreshing. It is not necessary to use it when the PoE works properly.
by npero
Sun Sep 07, 2014 8:12 am
Forum: General
Topic: IP Cloud
Replies: 112
Views: 86158

Re: IP Cloud

Hi buzz!

Can you show us the screenshot or configuration of the schedule for Cloud IP?

I think my cloud IP is not updating.
Here is it screen shoot.
by npero
Wed Sep 03, 2014 6:15 pm
Forum: General
Topic: after update router, OVPN can't access router
Replies: 5
Views: 1973

Re: after update router, OVPN can't access router

Yes, problem is solved before couple version. If I remember in version 6.16.
by npero
Fri Aug 29, 2014 9:59 am
Forum: General
Topic: Newsletter 61
Replies: 32
Views: 27774

Re: Newsletter 61

Janis is right it is nice power for home use, I have 951G and first thing I do when is install is to lower power to 12dB is quite enough to covert couple rooms in flat. I don't understand why people want high power device in they living or working rooms :shock:. Just thing using high power device gi...
by npero
Fri Aug 29, 2014 9:46 am
Forum: General
Topic: RB2011 + CyberpowerUPS via USB
Replies: 8
Views: 2953

Re: RB2011 + CyberpowerUPS via USB

I use on all my places APC ups and Mikrotik UPS package to monitoring. Usually it is APC CS 650 connected to USB port on 750UP, 411U or 433GL on some places use APC Smart UPS 750 but connected to USB to serial converter because not have serial port on that location and directly connected ups on USB ...
by npero
Wed Aug 27, 2014 5:28 pm
Forum: SwOS
Topic: New version rc
Replies: 4
Views: 2917

Re: New version rc

Contact support for 1.14rc test version if you expertise problem, but I thing final version will be release very soon.
by npero
Wed Aug 27, 2014 12:52 pm
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

I also have two 260GSP updated to 1.14rc2 first one now have up time 8 days and 20 hours not losing power on port 2 also on port 4, second switch some up time but lost power on port 2 before 5 days, 3 days after update. For now I satisfied with result before never have up time 8 days on port 2 also ...
by npero
Fri Aug 15, 2014 1:18 pm
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

if you are interested in trying out possible fix for the issue please write to support@mikrotik.com referring to this post/thread/issue. We will give you access to test firmware for RB260GSP I all ready receive from you 1.14beta2 Ticket#2014081466000195 I will test tomorrow morning and send you scr...
by npero
Thu Aug 14, 2014 3:41 pm
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

Yes some problem I have on two 260GSP, port 2 also on my two RB260GSP, I write port 1 thing first POE port but on case and web it is port 2, some time on port 4 in my case lost power.
by npero
Thu Aug 14, 2014 2:05 pm
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

we are working on the issue. Hopefully working solution will be ready soon.
Thanks for answer. I will wait sometime don't send back to RMA. If you need to test something I have two 260GSP in real network with this issue.
by npero
Thu Aug 14, 2014 11:14 am
Forum: General
Topic: IP Cloud
Replies: 112
Views: 86158

Re: IP Cloud

Thanks very much.

If you need more information I send it you supout.rif before almost two weeks 30.6 with that problem Ticket#2014073066000442.
by npero
Thu Aug 14, 2014 10:05 am
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33449

Re: RB260GSP ready for prime time?

ItsMe some problem here buy two 260GPS they or loosing power usually on port 1. Iswitch port 1 to on not auto its little help but today again lose power on port1 and need to off that on and power working again. My switch have report maximal load per port 130mA and much worst because by default port ...
by npero
Thu Aug 14, 2014 8:46 am
Forum: General
Topic: IP Cloud
Replies: 112
Views: 86158

Re: IP Cloud

Or use normal dynamic dns service that works reliably as you want... Of course but what is reliably today, no-ip before couple weeks not working almost one week, other service what I am using not have possibility to change TTL, IP cloud is almost perfect scheduler resolve bug :D. Recommendation for...
by npero
Thu Aug 14, 2014 8:31 am
Forum: General
Topic: IP Cloud
Replies: 112
Views: 86158

Re: IP Cloud

Buzz your are right IP Cloud have bug if you behind NAT not update IP address because not see address is changed, I all ready write support but no answer they say update every minutes but it is not true they update on change but if router behind NAT not see change and not update must click force upd...
by npero
Wed Aug 06, 2014 7:18 am
Forum: Wireless Networking
Topic: BE AWARE! BUG; wireless-fp package fail on rb411
Replies: 2
Views: 1316

Re: BE AWARE! BUG; wireless-fp package fail on rb411

I am using wireless-fp on 3 411AH, 2 411U, one 411 and one 411A from version 6.13 now is updated to 6.18 no problem at all in older version have some time reboot because of kernel failure but after I thing 6.16 that bug is resolved. Card is R52n, R52nM and Compex WLM54G.
by npero
Wed Jul 30, 2014 7:39 pm
Forum: General
Topic: RB912UAG-2HPND DEAD AFTER V6.17 UPDATE
Replies: 11
Views: 2774

Re: RB912UAG-2HPND DEAD AFTER V6.17 UPDATE

Do you try what I write ? Do you try with other computer with Windows XP ?
by npero
Wed Jul 30, 2014 4:33 pm
Forum: General
Topic: RB912UAG-2HPND DEAD AFTER V6.17 UPDATE
Replies: 11
Views: 2774

Re: RB912UAG-2HPND DEAD AFTER V6.17 UPDATE

If you hear beep it is live :). Try different computer usually for netinstall I prefer Windows XP. Open netinstall enable net boot and enter ip for example 192.168.88.1 you MUST enter static adress in LAN card example 192.168.88.2 also disconect from wireless, pppoe all other connection, disable fir...
by npero
Tue Jul 29, 2014 1:39 pm
Forum: General
Topic: ip cloud rule broblem
Replies: 11
Views: 6609

Re: ip cloud rule broblem

Paste your firewall rules in input chain, that rules tested on five router and working.

Whet disable your input rules in filter it is working ?
by npero
Tue Jul 29, 2014 12:45 pm
Forum: General
Topic: ip cloud rule broblem
Replies: 11
Views: 6609

Re: ip cloud rule broblem

add chain=input comment=Cloud in-interface=WAN_interface protocol=udp src-port=15252
My rule for Cloud, also Normis send me name of server if you want to open all port to cloud server.
by npero
Tue Jul 22, 2014 7:09 am
Forum: General
Topic: IP Cloud
Replies: 112
Views: 86158

Re: IP Cloud


what ros version this IP cloud features?

thanks
I thing from version 6.13 but use latest version 6.17 if your router don't have public address, because in 6.16/6.17 can use external address for update.
by npero
Tue Jul 22, 2014 7:04 am
Forum: General
Topic: ATTENTION, DISASTER! V.6.17
Replies: 57
Views: 21198

Re: ATTENTION, DISASTER! V.6.17

I my network all devices is updated to 6.16 main router to 6.17. It is RB411AH, RB411, RB411U, RB433AH, RB433GL, Groove, SXTLite and main router x86, for now uptime is between 2 and 3 day I don't see any problem in my configuration. OpenVPN bug is solved I have open ticket for months for that bug no...
by npero
Thu Jul 17, 2014 7:41 am
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 75497

Re: CAPs Manager

I have two (separate) implementation: I reduced cpu timing and everything worked well for 4 hours. One of the RB411AR did not survive this experiment . I changed it for Metal and Metal works very good. I tried also RB333 and this unit also was restarting again and again Everything on software 6.15 ...
by npero
Wed Jul 16, 2014 8:27 pm
Forum: RouterBOARD hardware
Topic: RB 433 LD501-LD504 Permanently On
Replies: 5
Views: 1810

Re: RB 433 LD501-LD504 Permanently On

I have couple of device with similar symptoms, if button not help to load backup boot loader usually processor is broken.
by npero
Sat Jul 12, 2014 6:33 pm
Forum: General
Topic: v6.16 RC test release now includes 802.11ac support
Replies: 52
Views: 27399

Re: v6.16 RC test release now includes 802.11ac support

Go to System Package mark wireless-fp and click on button enable. After that must go to System Reboot and after reboot package is active.
It was installed wireless-fp package.

How do it use Wireless-fp package?
by npero
Mon Jul 07, 2014 2:40 pm
Forum: RouterBOARD hardware
Topic: RB750UP temeperature problem
Replies: 20
Views: 5182

Re: RB750UP temeperature problem

I have couple 750UP hottest have 72 other around 55 but today is very hot day usually temperature is lower. I thing on that with high temperature something is wrong with temperature sensor because from first day have higher temperature compare to other and on that is connected one 433AH and SXTlite....
by npero
Sun Jul 06, 2014 4:49 pm
Forum: Wireless Networking
Topic: sxt tx power
Replies: 8
Views: 3727

Re: sxt tx power

Yes it is ok.
by npero
Fri Jul 04, 2014 6:30 pm
Forum: Wireless Networking
Topic: sxt tx power
Replies: 8
Views: 3727

Re: sxt tx power

Check in wireless registration table signal strength change power to have signal between -50 to -60.
I thing on new devices like yours must use all rates fixed for settings tx power not default card rate but effect of this setting is visible on registration table.
by npero
Fri Jul 04, 2014 11:14 am
Forum: Wireless Networking
Topic: sxt tx power
Replies: 8
Views: 3727

Re: sxt tx power

Thanks alot I change tx power from default to card rate = 8 Is this true ? And another question is about link configuration I setup one sxt as bridge and another one as station bridge But in some document says set on side as bridge and another Side station wds Could you plz whats difrence between t...
by npero
Fri Jul 04, 2014 10:37 am
Forum: Wireless Networking
Topic: sxt tx power
Replies: 8
Views: 3727

Re: sxt tx power

hi everybody i have two sxt 5phnd and configured as point to point link but distance between two sxt is about 80 or 90 m should i decrease TX power ? and please advice me anythings that i should do thanks very much Yes it very short range decrease tx power to have signal between -50 and -60 in regi...
by npero
Wed Jun 18, 2014 7:50 am
Forum: General
Topic: mikrotik sxt g-2hnd
Replies: 1
Views: 1079

Re: mikrotik sxt g-2hnd

Reset device to default if it is not new, plug in LAN cable go to http://192.168.88.1 use Quick set feature
http://wiki.mikrotik.com/wiki/Manual:Quickset
by npero
Thu Jun 12, 2014 6:29 pm
Forum: General
Topic: v6.15 released
Replies: 302
Views: 133338

Re: v6.15 released

What is new in RouterBOOT 3.16 ?
Before couple minutes update one 951G for test and also firmware.
by npero
Tue Jun 10, 2014 9:02 am
Forum: General
Topic: v6.14 released
Replies: 114
Views: 37770

Re: v6.14 released

x86 UPS package not working, also try to uninstall UPS package and install again now log say package exist but I not see in package list, and in 6.14 on x86 don't have monitoring UPS now on 750UP is working. Also OpenVPN bridge bug not resolved. EDIT: Install fresh from CD image in Virtual Machine U...
by npero
Mon Jun 09, 2014 7:48 pm
Forum: General
Topic: v6.14 released
Replies: 114
Views: 37770

Re: v6.14 released

Why upgrading device with all package just use upgrade package http://download2.mikrotik.com/routeros/6.14/routeros-mipsbe-6.14.npk download upgrade and you can find regular end fp wireless package. I can't seem to find the "wireless-fp" package - am I missing something here? downloaded al...
by npero
Fri Jun 06, 2014 8:18 am
Forum: General
Topic: Connecting to serial devices with a USB FTDI TTL-232 cable
Replies: 3
Views: 3745

Re: Connecting to serial devices with a USB FTDI TTL-232 cab

I use USB to serial adapter to connect serial UPS to RouterBoard. One place use FTDI usb to serial on other Prolific convert both working for connecting UPS for now not try anything else.
by npero
Fri Jun 06, 2014 6:29 am
Forum: Wireless Networking
Topic: [Please Help ] Ask About AP-WDS vs WDS Slave
Replies: 4
Views: 2024

Re: [Please Help ] Ask About AP-WDS vs WDS Slave

Hello, I was implementation about this scenario : AP ( WDS ) --- AP ( WDS ) = Option 1 AP ( WDS ) --- Wds Slave = Option 2 This option have different function, I think speed is the some. AP (WDS) Option 1 allow client to connect to both AP, both AP must be at some channel. Wds slave allow to connec...
by npero
Thu May 29, 2014 5:19 pm
Forum: General
Topic: after update router, OVPN can't access router
Replies: 5
Views: 1973

Re: after update router, OVPN can't access router

Look here http://forum.mikrotik.com/viewtopic.php?f=2&t=85222 I thing you have some bug problem like as.
by npero
Thu May 29, 2014 10:30 am
Forum: General
Topic: Cannot ping gateway when using OpenVPN TAP + bridging
Replies: 5
Views: 3275

Re: Cannot ping gateway when using OpenVPN TAP + bridging

I have same problem, contact support 24.3.2014. for now no answer on my ticket. Other thread about problem http://forum.mikrotik.com/viewtopic.php?f=2&t=85090
by npero
Fri May 16, 2014 2:27 pm
Forum: General
Topic: OVPN bridging
Replies: 18
Views: 11132

Re: v6.13 released!

Ulypka there is no such feature! It is not a bug! Windows doesn't support any tunnel bridging, it is RouterOS-to-RouterOS feature But in older version works :), also windows to windows work, also in my case only problem is MT device where is server other devices in bridged network work. Problem is ...
by npero
Fri May 16, 2014 12:25 pm
Forum: General
Topic: OVPN bridging
Replies: 18
Views: 11132

Re: v6.13 released!

rextended, I will check for the issue, and try to find out why it is not fixed yet.
And we will try to fix it at 6.14 version.

Check Ticket#2014032466000827 you have explanation how to try.
by npero
Fri May 16, 2014 12:22 pm
Forum: General
Topic: OVPN bridging
Replies: 18
Views: 11132

Re: v6.13 released!

Ulypka there is no such feature! It is not a bug! Windows doesn't support any tunnel bridging, it is RouterOS-to-RouterOS feature But in older version works :), also windows to windows work, also in my case only problem is MT device where is server other devices in bridged network work. Problem is ...
by npero
Fri May 16, 2014 12:10 pm
Forum: General
Topic: OVPN bridging
Replies: 18
Views: 11132

Re: v6.13 released!

Ovpn in the bridge is still not working :( interface ovpn-server server set mode=ethernet ppp profile set 0 bridge=bridge1 ROS in <6.8 works in ROS 6.8 6.9 6.10 6.11 6.12 6.13 not working Not tested in 6.13 but can confirm in older version bug is you can access to every device in network but not on...
by npero
Mon May 12, 2014 9:20 am
Forum: RouterBOARD hardware
Topic: 750UP hardware switch problem
Replies: 0
Views: 895

750UP hardware switch problem

Is anyone have problem with hardware switch in 750UP. Configuration is simple 750UP on eth1 is routing other port are in switch group eth2 is master. Network configuration x86 -- LAN switch--- SxLite <<<>>>> Sxlite--eth2 750UP eth3 RH433AH(eth1) R52nM <<>>>>> x86 From x86 to x86 running UDP bandwidt...
by npero
Mon Apr 28, 2014 11:08 am
Forum: General
Topic: Issue Updating My GROOVE 52HPn
Replies: 3
Views: 2793

Re: Issue Updating My GROOVE 52HPn

Download file from http://download2.mikrotik.com/routeros/ ... e-6.12.npk open WinBox open files and copy paste this file, after that restart device wait to upgrade if not then open log from winbox and take screen shoot attach here to see what happend.
by npero
Mon Apr 28, 2014 9:22 am
Forum: General
Topic: Issue Updating My GROOVE 52HPn
Replies: 3
Views: 2793

Re: Issue Updating My GROOVE 52HPn

When copy 6.xx package and reset device look the log, paste log output here or screen shoot of log window from winbox.
by npero
Tue Apr 22, 2014 12:57 pm
Forum: General
Topic: v6.12 released
Replies: 236
Views: 81565

Re: v6.12 released

Normis what about Ticket#2014032466000827 almost one month pass no answer.
by npero
Mon Apr 21, 2014 9:19 pm
Forum: RouterBOARD hardware
Topic: RB433 not boot hardware problem any solution ?
Replies: 3
Views: 2009

Re: RB433 not boot hardware problem any solution ?

No beep, no boot, no console output.
Hardware problem is someone have some experience with this type of failure what can be problem ?
by npero
Mon Apr 21, 2014 9:52 am
Forum: RouterBOARD hardware
Topic: RB433 not boot hardware problem any solution ?
Replies: 3
Views: 2009

RB433 not boot hardware problem any solution ?

I have two boards with similar symptoms. First blue led shine led501-504 is also on but no boot, no console output. Second blue and green led on led501-504 on but no boot, no console output. It is hardware problem is anyone try to resolve similar failure what can be problem broken processor, ram, na...
by npero
Wed Apr 16, 2014 8:20 am
Forum: General
Topic: v6.12 released
Replies: 236
Views: 81565

Re: v6.12 released

Ticket#2014032466000827 not fixed, it is not working in last couple version, also other user on forum confirm bug.
When it will be fixed ?
by npero
Thu Mar 27, 2014 11:42 am
Forum: Wireless Networking
Topic: 18km PtP wireless link issue
Replies: 21
Views: 7471

Re: 18km PtP wireless link issue

Yes 6.11 but need to install separate wireless package look on download page http://www.mikrotik.com/download, also this is beta package installing disable regular wireless package but be careful switch back an do disabling this new package and must enable regular package to wireless work again also...
by npero
Thu Mar 27, 2014 10:22 am
Forum: Wireless Networking
Topic: 18km PtP wireless link issue
Replies: 21
Views: 7471

Re: 18km PtP wireless link issue

Try to set hw. retries to 15 usually can help in this situation, also for nstreme can try different framer policy and framer limit or switch to nv2 work more stable on N wireless interface. Also you can try new wireless package but is beta for now I try on 23km p2p for now experience is very good if...
by npero
Wed Mar 26, 2014 8:35 am
Forum: General
Topic: v6.11 released
Replies: 260
Views: 112358

Re: v6.11 released

Anyone can confirm this bug: 1. Not very important, upgrade to 6.11 Groove, SxLite, RB711, lost default LED indication for wireless signal strength. On RB411 try to add new LED, LED appears as unknown closing, open again new led windows in WinBox help to back to normal. 2. Before last couple version...
by npero
Fri Mar 21, 2014 7:54 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 112358

Re: v6.11 released

Some problem but no rule some RB working some not, 433AH working, 433GL no, one Groove is ok other not. Solution: Winbox 1. Open clock 2. Select time zone manual click apply 3. Select back your time zone click apply 4. Click OK (must click ok ) Log time is now ok. Log shows events with GMT time, not...
by npero
Thu Mar 06, 2014 8:16 am
Forum: General
Topic: v6.10 released
Replies: 248
Views: 108962

Re: v6.10 released

May i use ROS 6.10 in RB750 ?
Yes I used it on RB750 basic configuration no problem. For now up time is 15 days.
by npero
Mon Mar 03, 2014 10:33 pm
Forum: RouterBOARD hardware
Topic: RB750UP hardware switch problem
Replies: 2
Views: 1580

Re: RB750UP hardware switch problem

Will try, thanks. But RB750UP is brand new upgraded to 6.10 and configured.
by npero
Sat Mar 01, 2014 10:04 pm
Forum: RouterBOARD hardware
Topic: RB750UP hardware switch problem
Replies: 2
Views: 1580

RB750UP hardware switch problem

Network configuration x86 -- LAN switch--- SxLite <<<400m nv2>>>> Sxlite--eth2 750UP eth3 RH433AH(eth1) R52nM <<1km>>> x86 RB750UP eht2 master port 3,4,5 slaves Running bandwidth test UDP from one to another x86 when reach more that 90Mbps eth3 on RB750 where is 433 connected go down test of course ...
by npero
Tue Feb 18, 2014 3:53 pm
Forum: RouterBOARD hardware
Topic: groove A-52HPn
Replies: 3
Views: 2165

Re: groove A-52HPn

Check power supply, POE injector and UTP cable.
by npero
Thu Feb 13, 2014 7:09 pm
Forum: RouterBOARD hardware
Topic: R52Hn compatibility with R52H
Replies: 2
Views: 1610

Re: R52Hn compatibility with R52H

Not comptabile if you are using 40Mhz mode on R52H. R52Hn not see signal 40Mhz mode on R52H, on other direction is working but using 20Mhz.
by npero
Mon Feb 10, 2014 9:34 am
Forum: General
Topic: 6.9 released!
Replies: 222
Views: 103733

Re: 6.9 released!

I also don't have problem with 6.9. Simple configuration routing mark work, OpenVPN server, PPTP server work, PPPOE server with radius work. No problem for now, all network now running 6.9, x86, sxlite, groove, Rb433, Rb433AH, RB750, RB711. In upgrade process lost one x86 after upgrade log is full s...
by npero
Sun Feb 02, 2014 10:53 am
Forum: General
Topic: 6.9 released!
Replies: 222
Views: 103733

Re: 6.9 released!

Any successful upgrades of the x86. I guess ROS 6.9 has issues understanding the hard disk. I upgrade x86 on them PPPOE server around 80 active PPPOE connection, radius authentication, NAT, OSPF, MPLS, VPLS not very complicated setup so far no problem. Up time: 21 hours for now Software 6.9 for The...
by npero
Sat Feb 01, 2014 7:23 pm
Forum: General
Topic: 6.9 released!
Replies: 222
Views: 103733

Re: 6.9 released!

I tried another RB as a client... All RB from our corporate network cann't connect to RB with OS 6.9 installed
I try to connect for one Rb750 to x86 OpenVPN both 6.9.
Yes disconnect your are right.

Solution select on OpenVPN client chipper and authenticate different from any then working.
by npero
Sat Feb 01, 2014 6:20 pm
Forum: General
Topic: 6.9 released!
Replies: 222
Views: 103733

Re: 6.9 released!

OpenVPN server doesn't work! Clients log off immediately after connection establishing. Downgrade to 6.7. I try to connect to OpenVPN on x86 after upgrade to 6.9 no problem. Using OpenVPN client in windows version 2.3.1. Also this x86 machine is PPPOE server with radius authentication and around 80...
by npero
Fri Jan 31, 2014 9:06 am
Forum: Wireless Networking
Topic: Internet access or network down customer notification
Replies: 9
Views: 4177

Re: Internet access or network down customer notification

Do you try Reset HTML in web proxy? This option will create default html. Form wiki Customizing error pages To customize the page web proxy shows on error: [admin@MikroTik] > /ip proxy reset-html Current html pages will be lost! Reset anyway? [y/N] Answer 'y'. Now HTML files are accessible for editi...
by npero
Thu Jan 30, 2014 10:35 am
Forum: General
Topic: v6.8 pre-release (RC)
Replies: 44
Views: 9147

Re: v 6.8 released

And what about strange OmniTik behavior, when device can boot up only if i try to reset it ???????
if you use the Reset button to power on (the button loads backup RouterBOOT).
Using reset button load backup bootloader.
by npero
Sat Jan 25, 2014 4:30 pm
Forum: Wireless Networking
Topic: Turbo Mode on 5GHz-A link
Replies: 14
Views: 9533

Re: Turbo Mode on 5GHz-A link

Must change framer policy and framer limit to have stable link.
Try with framer limit 3200 and try all framer polices, not have universal solution must try different setting for framer policy and framer limit to have stable link.
by npero
Sat Jan 25, 2014 10:34 am
Forum: Wireless Networking
Topic: Turbo Mode on 5GHz-A link
Replies: 14
Views: 9533

Re: Turbo Mode on 5GHz-A link

Also you can try to use protocol nstreme some time I have better result on 802.11a links using nstreme. On client side for protocol set any, on AP side change to nstreme and in nstreme tab set framer policy and framer limit try this and test maybe you have better result. Framer policy: Extract size ...
by npero
Thu Jan 23, 2014 10:15 am
Forum: Wireless Networking
Topic: Turbo Mode on 5GHz-A link
Replies: 14
Views: 9533

Re: Turbo Mode on 5GHz-A link

Do this add default and also frequency using on AP like this on picture.
Then try to switch to 40MHz.
scan.png
by npero
Thu Jan 23, 2014 8:32 am
Forum: General
Topic: OS upgrade
Replies: 3
Views: 1222

Re: OS upgrade

Yes you can upgrade to v6. Because you using factory version of software don't show upgradable first time when you upgrade this will be show.
If you upgrade to 6.xx after that in upgradable field will be to v8.x.
by npero
Wed Jan 22, 2014 10:56 pm
Forum: Wireless Networking
Topic: Turbo Mode on 5GHz-A link
Replies: 14
Views: 9533

Re: Turbo Mode on 5GHz-A link

Check what client say in log. Go to system logging and add topic wireless after change to 40Mhz mode see log, in log you will see what client say usually that help to see what is problem. I do same thing do many link change from 20 to 40 usually problem is scan list or only need to change frequency ...
by npero
Wed Jan 22, 2014 6:55 pm
Forum: Wireless Networking
Topic: Turbo Mode on 5GHz-A link
Replies: 14
Views: 9533

Re: Turbo Mode on 5GHz-A link

Do you try to change channel ? When you do scan on client do you see signal from AP ?
by npero
Tue Jan 21, 2014 8:31 am
Forum: Wireless Networking
Topic: Turbo Mode on 5GHz-A link
Replies: 14
Views: 9533

Re: Turbo Mode on 5GHz-A link

Check the scan list on station. Station will scan only channels in the scan list. Scan list in depend of frequency mode and selected country, superchannel mode allow you to use all frequencies in scan list. If you click on frequency field in WinBox on station you will see bold default scanning frequ...
by npero
Fri Jan 17, 2014 1:44 pm
Forum: Wireless Networking
Topic: Wireless interface - Slave
Replies: 12
Views: 20177

Re: Wireless interface - Slave

Yes because you are using v6.x.
by npero
Fri Jan 17, 2014 10:33 am
Forum: Wireless Networking
Topic: Wireless interface - Slave
Replies: 12
Views: 20177

Re: Wireless interface - Slave

yes if the protocol mode is in rstp
Why need to to use rstp ? On all my devices protocol is none and also have S in bridge interface, of course we are talking about version 6.x ? In older version is different.
by npero
Fri Jan 17, 2014 9:09 am
Forum: Wireless Networking
Topic: Wireless interface - Slave
Replies: 12
Views: 20177

Re: Wireless interface - Slave

I have the same question/problem. My wireless card is set to ap-bridge mode ( no wds...etc.) But when i check my interface it says "RS" (R-running, S-slave) Dont understand why my Wireless is marked as slave. RouterOS V6.7, RB751U-2HND Thanks Because your interfaces is in bridge, that's m...
by npero
Wed Jan 15, 2014 11:09 pm
Forum: General
Topic: Update to new license format old Mikrotik
Replies: 1
Views: 1058

Re: Update to new license format old Mikrotik

Contact Mikrotik support http://www.mikrotik.com/aboutus with serial number of device and soft-id only they can help you, your device lost licence.
by npero
Fri Dec 27, 2013 1:30 pm
Forum: Wireless Networking
Topic: SXT Signal Strength Indicator
Replies: 7
Views: 11164

Re: SXT Signal Strength Indicator

Check /system led look my picture.
by npero
Fri Nov 29, 2013 8:11 pm
Forum: General
Topic: Log is flooded with "system, info address changed"
Replies: 5
Views: 2918

Re: Log is flooded with "system, info address changed"

Try to remove this topic system,debug from logging.
by npero
Sat Nov 23, 2013 11:45 pm
Forum: Wireless Networking
Topic: Mikrotik 6.6 Atheros WiFi Drivers
Replies: 13
Views: 11909

Re: Mikrotik 6.6 Atheros WiFi Drivers

Here is picture, this TP-Link in my router working.
Image

Image

Image
by npero
Thu Nov 21, 2013 1:17 pm
Forum: Wireless Networking
Topic: Mikrotik 6.6 Atheros WiFi Drivers
Replies: 13
Views: 11909

Re: Mikrotik 6.6 Atheros WiFi Drivers

I must check that x86 possible in Saturday when have access to that machine. I will send picture from card label.
by npero
Thu Nov 21, 2013 10:16 am
Forum: Wireless Networking
Topic: Mikrotik 6.6 Atheros WiFi Drivers
Replies: 13
Views: 11909

Re: Mikrotik 6.6 Atheros WiFi Drivers

I have in one x86 Tp-Link TL-WN851N but don't know what version of card on some x86 TP-link miniPCI 802.11n card both work like R52n card witout any problem. I have only problem with TP-Link PCI-E card TL-WN881ND is work unstable. If if you need when I been on the field can open x86 and make photo o...
by npero
Tue Nov 19, 2013 7:45 pm
Forum: Wireless Networking
Topic: Can i say "Welcome" on my Wifi ??
Replies: 5
Views: 4811

Re: Can i say "Welcome" on my Wifi ??

You can use address list and web proxy for that purpose. In is little complicate but it work on my network, make two rules first to pass IP in address list and other to redirect to web proxy. Make page on web server setup web proxy to redirect everything to your page and also on page create link to ...
by npero
Tue Nov 12, 2013 6:01 pm
Forum: General
Topic: OVPN in ROS 6.6
Replies: 5
Views: 2057

Re: OVPN in ROS 6.6

Add in logging OpenVpn to see what happens. I use OpenVPN between two MT 6.6 and working also use from Windows client to MT 6.6 is working. Some time happens OpenVPN server just stop working, client don't what to connect reboot router work again. Try to reset router where is OpenVPN server, I have t...
by npero
Sat Nov 09, 2013 7:16 pm
Forum: General
Topic: RouterOS v6.6 released
Replies: 164
Views: 88048

Re: RouterOS v6.6 released

Nice release for killing x86 for now 3 router is dead and counting. One come back after 5 minutes reboot without proper shutdown and now working, two need to remove hdd reinstall and now working. Both x86 failed to update have some chipset on mainboard nForce 3, for that reason I replace one with I...
by npero
Sat Nov 09, 2013 1:56 pm
Forum: General
Topic: RouterOS v6.6 released
Replies: 164
Views: 88048

Re: RouterOS v6.6 released

Nice release for killing x86 for now 3 router is dead and counting.
by npero
Tue Oct 29, 2013 10:25 am
Forum: General
Topic: RouterBoard run out of memory
Replies: 33
Views: 20785

Re: RouterBoard run out of memory

I don't exactly calculate my board have 128MB ram, I see OS use around 25MB put 80000 and any time I have around 20MB memory free and not have problem with memory watchdog.
Maybe try with some small values and rise it to see when watchdog is triggered if you have some RB easy accessible.
by npero
Tue Oct 29, 2013 8:28 am
Forum: General
Topic: RouterBoard run out of memory
Replies: 33
Views: 20785

Re: RouterBoard run out of memory

I don't have experience with that boards I can't recommend settings sorry. I thing is problem related to watchdog memory limit and memory limit for proxy. On x86 never seen to happen this with unlimited work perfectly, by on RB make problem. Like I say before limit on 80000 on 951 never again see re...
by npero
Mon Oct 28, 2013 7:48 pm
Forum: General
Topic: RouterBoard run out of memory
Replies: 33
Views: 20785

Re: RouterBoard run out of memory

florinbro max-cache-size=unlimited for ip proxy should allow to use available RAM resources, but it should not lead to out of memory problem. Please send support output file to support (support@mikrotik.com) with current configuration (of if it possible with low amount of RAM left), we will investi...
by npero
Mon Oct 28, 2013 2:24 pm
Forum: General
Topic: RouterBoard run out of memory
Replies: 33
Views: 20785

Re: RouterBoard run out of memory

Limit memory usage in Web proxy this happen because web proxy use memory and trigger watch dog.
Don't use unlimited enter some value and problem is gone :) .
by npero
Sat Oct 26, 2013 9:22 am
Forum: Wireless Networking
Topic: How do I separate 2 DHCP ?
Replies: 1
Views: 1524

Re: How do I separate 2 DHCP ?

On AP or client just drop udp port 67-68 you can do that in bridge filter.
/interface bridge filter 
chain=forward action=drop in-interface=ether1 mac-protocol=ip dst-port=68 ip-protocol=udp 
chain=forward out-interface=ether1 action=drop mac-protocol=ip dst-port=68 ip-protocol=udp 
by npero
Thu Oct 17, 2013 6:42 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 87477

Re: 6.5 released!

Is any solution to make 6.5 client connect without chipper I not need to secure line? You can set cipher and auth =none on client. In 6.4 is none upgrade 6.5 don't connect with none say auth and chipper not supported. Problem is related with bridge and chipper try to connect from 6.5 to 5.xx withou...
by npero
Thu Oct 17, 2013 5:57 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 87477

Re: 6.5 released!

Have problem with OpenVPN. I upgraded OpenVPN MT client to 6.5 and after change auth and chiper connect to 6.4 server but work slow and very strange. I can open web page on my server on other side, but WinBox try to connect and waiting after that disconnect. Can ping devices on other side, also can ...
by npero
Mon Oct 07, 2013 8:46 pm
Forum: Wireless Networking
Topic: I can not access my sextant through my rb 433
Replies: 2
Views: 1537

Re: I can not access my sextant through my rb 433

How you configure you RB433 and Sextant ? You have devices in different subnet please post routing table all address on all interfaces. Little strange you use external address for Sextant not local but ok.
Much more detail about configuration if you what someone to help you.
by npero
Wed Oct 02, 2013 3:44 pm
Forum: Wireless Networking
Topic: TPLINK WN851ND
Replies: 8
Views: 5272

Re: TPLINK WN851ND

I have TP-Link TL-WN851N work fine on one of mine sites. Now running 6.4 on x86.
I don't know what is difference between N and ND version.

When I have been on site can check hardware revision of PCI card.
by npero
Mon Sep 23, 2013 8:33 pm
Forum: Wireless Networking
Topic: AR9287 problems and results
Replies: 6
Views: 3348

Re: AR9287 problems and results

This is PCI-e x1 card not mini I used in x86 mainboard.
Try in some old board with nForce 4 chipset and also in mainboard with Intel chipset P35 some thing.
by npero
Mon Sep 23, 2013 5:42 pm
Forum: Wireless Networking
Topic: AR9287 problems and results
Replies: 6
Views: 3348

Re: AR9287 problems and results

In version 5.xx don't supported don't appear in interface list.
Try on the field work in AP mode if you not do scan.

6.3 some issues like 6.1 don't try for how in 6.4.
by npero
Fri Sep 13, 2013 12:08 am
Forum: General
Topic: v6.4 released
Replies: 170
Views: 77591

Re: v6.4 released

*) ovpn - allow to specify server via dns name;

thanks! :D
Also thanks :D
by npero
Fri Sep 06, 2013 3:04 pm
Forum: General
Topic: 6.3 Released
Replies: 95
Views: 28962

Re: 6.3 Released

*) pptp, l2tp, sstp - allow to specify server via dns name;
Please add OpenVPN to that list. Seriously, that's just unfair for users.
pptp - insecure.
sstp - supported only in windows.
l2tp - requires ipsec+l2tp combo, hard to configure by user.
+1
+1
by npero
Sat Aug 03, 2013 2:14 pm
Forum: General
Topic: v6.2 released
Replies: 247
Views: 111647

Re: v6.2 released

Proxy, access list if you define source address don't working any more.
I have couple rules based on source address with deny redirect I been very surprised :( when some IP just passed without redirecting or deny.
by npero
Sun Jul 28, 2013 8:32 am
Forum: Wireless Networking
Topic: AR9287 problems and results
Replies: 6
Views: 3348

AR9287 problems and results

If anyone try to use PCI-e card with AR9287 chipset please share your results. I buy TP-Link TL-WN881ND to test. First have very annoying bugs: 1. Do scan, scan couple signals and after that interface not working, solution restart router or change protocol from something to nv2 and not need to resta...
by npero
Mon Apr 29, 2013 7:15 pm
Forum: General
Topic: v5.25 released
Replies: 52
Views: 21879

Re: v5.25 released

Thanks Mikrotik update KILL my RB750.

RES button not working pushing it but LED not blink, ready for trash.
by npero
Mon Aug 06, 2012 7:07 am
Forum: General
Topic: web proxy Low speeds and High ping. RB750/751
Replies: 8
Views: 4875

Re: web proxy Low speeds and High ping. RB750/751

Try to disable cache on disk, also Max cache size to none.
System NAND is for operating system not for proxy cache and it is slow, try with this settings.

Why you need proxy ?
by npero
Sun Apr 29, 2012 7:59 am
Forum: General
Topic: v5.15 released!
Replies: 150
Views: 40939

Re: v5.15 released!

Wireless card AP mode stoppes after some hours. same with RB433 three wireless card ap stopped working i have to reboot. same RB411AR, RB433AH, RB411R and RB493G. I HAVE TO DOWNGRADE ALL OF THIS BOARDS Same situation, after a day or two stops traffic to users. I had to go back to v5.14 and everythi...
by npero
Mon Feb 06, 2012 7:46 am
Forum: Wireless Networking
Topic: 802.11n real test and work on my network
Replies: 12
Views: 6008

Re: 802.11n real test and work on my network

Me looks like this is the dish is using in picture

http://www.voltplus.co.rs/Antene/P-seri ... 524P2.html
by npero
Sat Dec 03, 2011 9:10 pm
Forum: Beginner Basics
Topic: Where to obtain demo license ?
Replies: 3
Views: 1711

Re: Where to obtain demo license ?

Go to http://www.mikrotik.com/ and create account after create account you can obtain free licence.
by npero
Fri Aug 05, 2011 8:54 pm
Forum: General
Topic: v5.6 released
Replies: 91
Views: 28038

Re: v5.6 released

Mirror bug, in registration table P throughput for N link is calculated wrong.
by npero
Mon Mar 14, 2011 3:37 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 21665

Re: v5rc11 is out!

Now I upgrade one x86 router from rc9 to rc11. First impression complete disaster, I have two link using nstreme and wds mode link connect and after couple seconds disconnect with extensive data lost before one of the links have 20day uptime now don't work. Also on AP interface client con't connect...
by npero
Sat Mar 05, 2011 7:42 am
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 21665

Re: v5rc11 is out!

Now I upgrade one x86 router from rc9 to rc11. First impression complete disaster, I have two link using nstreme and wds mode link connect and after couple seconds disconnect with extensive data lost before one of the links have 20day uptime now don't work. Also on AP interface client con't connect ...
by npero
Sun Feb 27, 2011 9:25 am
Forum: General
Topic: MT help us with NV2 for PTMP Please.
Replies: 62
Views: 17169

Re: MT help us with NV2 for PTMP Please.

Write mail to support and they usually give test version to try.
Every time when ask they give me test version, sometime you don't need to ask they send you link if you complain before for some problems.
by npero
Tue Nov 02, 2010 3:36 pm
Forum: Wireless Networking
Topic: Clock runs 10x fast with v3.28 wireless test package on x86
Replies: 12
Views: 4390

Re: Clock runs 10x fast with v3.28 wireless test package on

Where were you before? You told us this now when the clock is working fine with 4.13 :lol:
I don't discover this.
I read this on forum long time ago and use on my x86 routers form first couple 4.xx version. Now in 5.0rc no more problem with clock :D .
by npero
Tue Nov 02, 2010 2:07 pm
Forum: Wireless Networking
Topic: Clock runs 10x fast with v3.28 wireless test package on x86
Replies: 12
Views: 4390

Re: Clock runs 10x fast with v3.28 wireless test package on

Usually on 3.xx with wireless test and 4.xx setting multi-cpu to yes resolve problem with nstreme and clock on single core x86.

On 5.0rc this problem is resolved you can set multi-cpu to no or yes not problem, some old 5.0beta version have been some problem with nstreme and multicpu options.
by npero
Fri Sep 17, 2010 11:42 am
Forum: General
Topic: New wireless protocol: Nv2 in v5.0beta5
Replies: 217
Views: 99710

Re: New wireless protocol: Nv2 in v5.0beta5

Hi, please where can I download the RC1?
Thank you, also tests P2MP.
Contact support and ask for test version.
by npero
Fri Sep 10, 2010 6:44 pm
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 30357

Re: RouterOS v5 beta 6

next version will be out next week Please first resolve bug with restart on x86 with bridge filter. I send you now supout.rif form last non public version. Bridge Filter is not working on v5 really? I upgrade a lot of RBs and the bridge filter is not working... On x86 working in beta 6 in some non ...
by npero
Fri Sep 10, 2010 4:03 pm
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 30357

Re: RouterOS v5 beta 6

next version will be out next week
Please first resolve bug with restart on x86 with bridge filter.

I send you now supout.rif form last non public version.
by npero
Sun Jul 25, 2010 9:55 am
Forum: General
Topic: New wireless protocol: Nv2 in v5.0beta5
Replies: 217
Views: 99710

Re: New wireless protocol: Nv2 in v5.0beta5

Anyone have tested on x86 on 802.11n link ?
I can't get it work properly have low speed and disconnect, on some link WDS+nstreme work ok.
Also after changing some parameter on wireless interface router restart.
by npero
Sat Jul 24, 2010 9:10 am
Forum: General
Topic: New wireless protocol: Nv2 in v5.0beta5
Replies: 217
Views: 99710

Re: New wireless protocol: Nv2 in v5.0beta5

Now tested is horrible :( . WDS nstreme work very well with one chain switch to station and MPLS work little slower, but when go to Nv2 is disaster TX/Rx rate don't want to go more that 54/54Mbps and when traffic go link disconnected. Also without traffic ping is 5-6ms with traffic don't know discon...
by npero
Sat Jul 24, 2010 8:20 am
Forum: General
Topic: RouterOS 5 beta 5
Replies: 22
Views: 8944

Re: RouterOS 5 beta 5

Upgraded couple minutes ago and question.
When do wireless scan only have button start, where is stop button gone ?

Usually I do quick scan press stop and look results now I don't have any more stop :( scan is running until close scan window.
by npero
Wed Jun 30, 2010 10:43 pm
Forum: Wireless Networking
Topic: Does Ubiquity SR71-12 supported????
Replies: 4
Views: 1658

Re: Does Ubiquity SR71-12 supported????

If you don't see card in resource pci then is hardware problem, try to change minipci slot.
Even is card don't supported by driver is always see in pci resource if properly inserted in slot and not broken.
by npero
Sat May 29, 2010 11:00 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407960

Re: 802.11n

I also tested 802.11n this mooning. On production link simple replace UB5 on both side with R5nH and pigtail cable use some setting like before nstreme enabled, WDS static other side station WDS, adaptive noise immunity ap and client mode all like before on 5Ghz turbo link. Both side 4.9 Mode 5Ghz-a...
by npero
Sat May 08, 2010 8:01 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 57383

Re: MikroTik RouterOS version 5.0beta2 released!

All user using nstreme on x86 what to upgrade to 5.0beta2 big WARNING. If you before have problem with 4.x enable nstreme and clock go faster and resolve this problem with set multi-cpu option to yes DO NOT UPGRADE your router hung up when traffic go to the link with nstreme. Before upgrade set mult...
by npero
Sun May 02, 2010 2:17 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 57383

Re: MikroTik RouterOS version 5.0beta2 released!

One side 3.30 other side 5.0beta2 both side R52 cards 5Ghz turbo mode x86 routers, one side ap bridge other station wds. Enable nstreme on 5.0beta2 when other side connected router hang up, need to disconnect power to work again. Combination R52 card, x86 router and nstreme don't work :( . Without n...
by npero
Mon Apr 26, 2010 6:48 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407960

Re: 802.11n

Is someone try to test speed using only one chain, single polarity antenna ? If someone try please post result.

Thanks.
by npero
Tue Feb 16, 2010 9:54 am
Forum: General
Topic: RouterOS v4.5 released
Replies: 92
Views: 28416

Re: RouterOS v4.5 released

Disconnected happen couple time of day don't have any particular rule, strange thing is longer link where I disconnect every couple days how working much stable but shorter have this problem before upgrade on one shorter link have up time 30 days. Now I creating supout.rif from both upgraded box and...
by npero
Tue Feb 16, 2010 9:47 am
Forum: General
Topic: RouterOS v4.5 released
Replies: 92
Views: 28416

Re: RouterOS v4.5 released

I upgrade two of my Mikrotik box from 3.30 to 4.5 with couple nstreme links. One link have constantly disconnect data lost change hardware retries and now working better that 3.30 more stable better uptime, but other link with nstreme has been perfectly stable in 3.30 uptime on link usualy more that...
by npero
Sun Feb 14, 2010 7:43 am
Forum: General
Topic: Crazy numbers
Replies: 1
Views: 919

Crazy numbers

First time I see something like this :D Mikrotik 3.30

Image


I last couple of days l have changed firewall rules and today I have this strange numbers.
Restart usually help. Maybe upgrade.
by npero
Thu Jan 28, 2010 2:53 pm
Forum: Wireless Networking
Topic: help too much timeouts??
Replies: 3
Views: 1283

Re: help too much timeouts??

Upgrade to version 3.30 or 4.xx. Version 3.xx work much better on wireless I have tested on couple installation replace 2.9xx with 3.30 have much better throughput and ping. Recommended to upgrade 4.5 and have support from Mikrotik.
by npero
Tue Dec 29, 2009 7:08 am
Forum: Wireless Networking
Topic: R2N 802.11n not connect (after 802.11n guide)
Replies: 6
Views: 2743

Re: R2N 802.11n not connect (after 802.11n guide)

Something is wrong with you configuration.
Try to lower card power to get signal around -60, also check band you need 2,4Ghz only G, set preamble mode to long.
Also try to change frequency maybe you have strong interference to this channel try some other.
by npero
Sun Dec 20, 2009 8:45 pm
Forum: Wireless Networking
Topic: in local ACL,accept But not connected
Replies: 10
Views: 4023

Re: in local ACL,accept But not connected

Upgrade to 2.9.51 it is free. Resolve many bugs. If you license allowed go to 3.xx wireless work much better.
by npero
Sat Dec 19, 2009 4:32 pm
Forum: Wireless Networking
Topic: in local ACL,accept But not connected
Replies: 10
Views: 4023

Re: in local ACL,accept But not connected

Update to 2.9.51 it is free of charge not cost anything but resolve many bugs and add new feature or if your license allowed update to 3.30.

3 version have many many improvements in the wireless, wireless perform much better :) . You are using very old version.
by npero
Sat Dec 19, 2009 7:44 am
Forum: Wireless Networking
Topic: R2N 802.11n not connect (after 802.11n guide)
Replies: 6
Views: 2743

Re: R2N 802.11n not connect (after 802.11n guide)

-88 is very low signal, try to get signal around -60. Align antenna check cable.
by npero
Thu Dec 03, 2009 3:49 pm
Forum: Wireless Networking
Topic: Superchannel free from v4.3
Replies: 12
Views: 3676

Re: Superchannel free from v4.3

Thanks Mikrotik.
Don't need to buy more superchannel license. :D
by npero
Thu Nov 19, 2009 8:51 am
Forum: General
Topic: CPU Load 100%
Replies: 2
Views: 1074

Re: CPU Load 100%

This is very very old version upgrade to 2.9.51 it is free or if you license allow to 3.30 also upgrade from 3.xx to 4.xx is free.
Version 3.xx have many improvements and support new hardware.
by npero
Sat Nov 07, 2009 1:34 am
Forum: Wireless Networking
Topic: compatibility AP with xr5 and station r52 or cm9
Replies: 7
Views: 1887

Re: compatibility AP with xr5 and station r52 or cm9

wical please explain. I use one side R52 other side AR5213 Tp-link card signal -60 5Ghz turbo nstreme on UDP test 77Mbps / 66 Mbps slower result on other side is some old x86 router 500Mhz. Tx/Rx CCQ is always 100%/100%. Try to load the link but noting happens Mikrotik is 3.30. Also I use some old 5...
by npero
Mon Nov 02, 2009 7:40 am
Forum: Wireless Networking
Topic: long distance link keeps dropping
Replies: 5
Views: 1825

Re: long distance link keeps dropping

If you hardware retries set to 4 try to change hardware retries to 15 or maybe litter higher. I also have link 25km signal -80, with connect disconnect every couple minutes after changing hardware retries to 15 have up time couple of days. From manual: * hw-retries (number 0..15; default value: 15) ...
by npero
Wed Oct 21, 2009 12:02 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407960

Re: 802.11n

Thanks all for answer. I think maybe using one chain can get little more bandwidth compare to 5Ghz turbo nstreme. Add one more antenna is little complicated need more space, stronger tower more cables is not option for now on that place. Also dual polarity antenna is usually solid parabolic antenna ...
by npero
Wed Oct 21, 2009 10:29 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407960

Re: 802.11n

Is anyone try to replace 5Ghz turbo link with 802.11n link using only one chain, antenna ?

Can I get more bandwidth simple replacing miniPCI card ?

Good 5Ghz turbo nstreme link in bandwidth test get 75Mbit in one way UDP test, can be faster only replacing miniPCI card ?

Thanks...
by npero
Sun Oct 11, 2009 8:11 am
Forum: General
Topic: What are the Country limitations set to?
Replies: 2
Views: 1479

Re: What are the Country limitations set to?

* frequency-mode (one of regulatory-domain, manual-txpower or superchannel) : o regulatory-domain - Limit available channels and maximum transmit power for each channel according to the value of country o manual-txpower - Same as above, but do not limit maximum transmit power. o superchannel - Allo...
by npero
Sun Aug 23, 2009 10:30 pm
Forum: Wireless Networking
Topic: RB-11 & R5H
Replies: 1
Views: 905

Re: RB-11 & R5H

For me is work. R5H in RB11 work ok couple months in nForce 2 chip set main board with Athlon XP with full six PCI slots, in other slots are standard mini PCI card R52, CM9 some cheap no name atheros.
by npero
Tue Aug 04, 2009 1:01 pm
Forum: General
Topic: openvpn 3.27
Replies: 5
Views: 2566

Re: openvpn 3.27

I am also try to using OpenVPN from but not very success. My problem is after some time server just stop working client cannot connect in log I see connect disconnect. After disable enable server in setting server is stop logging anything only reboot router help to work again. I send couple supout.r...
by npero
Tue Jul 21, 2009 9:30 am
Forum: Wireless Networking
Topic: Solving 20km wireless link issues
Replies: 147
Views: 220423

Re: New 20km link, weird interference.

I also have 25km link with similar behavior. Night sometime signal goes to -69 usually is -80 but sometime goes to -90 and drop. But I possible have problem with fresnel zone one of antenna is not very high. If you find what cause this please write here. First setup I use R52 card and latter replace...
by npero
Fri Jul 03, 2009 9:34 am
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 385
Views: 278002

Re: NOT TO DO. Weird instalations?

Yes AC over ethernet :shock: :shock: :shock:
Try to crimp cable when is on. :D
by npero
Sat May 23, 2009 6:59 am
Forum: Wireless Networking
Topic: R52n & R2n
Replies: 30
Views: 16935

Re: R52n & R2n

Also I am interesting if I simple replace R52 with R52n using only one antenna what bandwidth I can aspect ?
If someone try this please share result. Thanks.
by npero
Thu Apr 23, 2009 9:04 am
Forum: Wireless Networking
Topic: Hello everyone... Major Wifi Project and help needed..
Replies: 15
Views: 5427

Re: Hello everyone... Major Wifi Project and help needed..

Best solution is some kind of CPE for that clients if you don't have much interference, good LOS, not very much cable between pci card and antena that work without CPE. I prefer another solution if i have couple of client in log distance talk with some of client and on his place create point to poin...
by npero
Wed Apr 22, 2009 12:08 pm
Forum: Wireless Networking
Topic: Hello everyone... Major Wifi Project and help needed..
Replies: 15
Views: 5427

Re: Hello everyone... Major Wifi Project and help needed..

4W amplifier :shock: :shock: We use R52 60mW for 25km ptp link. 4W crazy with this power you can cook something :lol: Sold amplifier for that money buy couple cheat omnidirectional and directional antena also couple routerboard and miniPCI card use low power and dislocate antenna to be closer to cli...
by npero
Sat Mar 07, 2009 7:13 am
Forum: Wireless Networking
Topic: 5GHz wds mode doesn't work
Replies: 4
Views: 1882

Re: 5GHz wds mode doesn't work

You use wds-mode=static you need to create WDS interface on AP side entering MAC address of wds client or change WDS to dynamic.
by npero
Wed Mar 04, 2009 5:12 pm
Forum: Wireless Networking
Topic: wireless link bridge-wds in one way slow
Replies: 1
Views: 1087

Re: wireless link bridge-wds in one way slow

Try to change freq. they usually help.
by npero
Wed Jan 28, 2009 5:16 pm
Forum: General
Topic: *) allow to use ip firewall for encapsulated PPPoE packets;
Replies: 6
Views: 2248

Re: *) allow to use ip firewall for encapsulated PPPoE packets;

Yes you can do anything like regular traffic passing bridge when enabled bridge ip firewall. See my post http://forum.mikrotik.com/viewtopic.php?f=2&t=29256 very good feature but if you have before configured firewall for regular traffic have lot problem like me in 3.19 now I can disable this fe...
by npero
Thu Jan 22, 2009 7:30 pm
Forum: General
Topic: Feature or bug in 3.19 PPPOE packets IP filter
Replies: 0
Views: 1053

Feature or bug in 3.19 PPPOE packets IP filter

In 3.19 we have new feature or bug when select use IP firewall in brigde setting if you use PPPOE the PPPOE packets also can filtrate when pass to bridge you can use IP firewall. This is mayor change a don't see this new feature in change log. If any way to disable this is very usful but have lots o...
by npero
Wed Jan 21, 2009 1:19 pm
Forum: General
Topic: 3.19
Replies: 26
Views: 5168

Re: 3.19

if in bridge you have set use-ip-firewall=yes then it will filter bridged packets as an indication you can disable these rules and see if traffic on port 80 starts to pass through the router. But how filter inside PPPOE packet ? Noting change in configuration downgrade to 3.17 and work again. Now I...
by npero
Wed Jan 21, 2009 12:16 pm
Forum: General
Topic: 3.19
Replies: 26
Views: 5168

Re: 3.19

check your nat and firewall, are there any rules that involve port 80 if some pages work, then check if mss rules are correct and you can send big packets over your pppoe links Yes I have lots of rules someone with port 80 but this is PPPOE packets layer 2 how IP filter can do something with PPPOE ...
by npero
Wed Jan 21, 2009 11:38 am
Forum: General
Topic: 3.19
Replies: 26
Views: 5168

Re: 3.19

I have very big problem in 3.19. Bridge network use PPPOE all PPPOE packets with destination port 80 don't pass to server. I don't know how or what but something filtrate all PPPOE packet with destination port 80. Simple people connect to PPPOE server is on another Mikrotik and PPPOE packets pass br...
by npero
Wed Dec 31, 2008 10:01 am
Forum: Wireless Networking
Topic: wireless 5km p-t-p, why results are horrible?
Replies: 19
Views: 3770

Re: OH..MY.....GOD!!!! what is happening?

Try to change antenna a to anntena b.
  • 1
  • 2