Community discussions

MikroTik App

Search found 36 matches

by nevolex
Fri Jul 03, 2020 11:19 am
Forum: General
Topic: Loop detected
Replies: 0
Views: 324

Loop detected

Hi guys I got a Mikrotik router and a QNAP NAs Nas has 1 SFP+ 10Gb port that works fine with Mikrotik SFP port and I wanted to add additional 1Gb copper link as a backup link Obviously It has to be some sort of STP configuration I set: Past cost 5 for SFP Past cost 10 for Copper Unfortunately, they ...
by nevolex
Sat Jun 06, 2020 2:25 pm
Forum: RouterOS v7 BETA
Topic: v7.0beta8 [development] is released!
Replies: 153
Views: 46958

Re: v7.0beta8 [development] is released!

Amazing what a fresh kernel, hi wireguard!

Thanks guys
by nevolex
Wed Jun 03, 2020 1:52 am
Forum: Wireless Networking
Topic: Mikrotik Audience Download speed is 2x slower than upload [SOLVED]
Replies: 6
Views: 1205

Re: Mikrotik Audience Download speed is 2x slower than upload [SOLVED]

Thank you all, here is my current config: [admin@MikroTik_Audience] > export compact hide-sensitive # jun/03/2020 10:47:48 by RouterOS 6.46.6 # software id = M0L0-MR8G # # model = RBD25G-5HPacQD2HPnD # serial number = B6BE:xx:xx:xx /interface bridge add arp=reply-only name=bridge-guest add name=brid...
by nevolex
Tue Jun 02, 2020 3:03 pm
Forum: Wireless Networking
Topic: Mikrotik Audience Download speed is 2x slower than upload [SOLVED]
Replies: 6
Views: 1205

Mikrotik Audience Download speed is 2x slower than upload [SOLVED]

Hi guys I am pretty happy with my Mikrotik Audience, but the download speeds are 2x slower than upload. I get around 300-350Mbs upload and about 150Mbs download The channels are not crowded. The coverage is good between 45-55 dBm , I am using only one AC band (1733Mbs) Can somebody please advise wha...
by nevolex
Thu May 28, 2020 11:34 am
Forum: General
Topic: Port forwarding to External OpneVPN Server [SOLVED]
Replies: 4
Views: 858

Re: Port forwarding to External OpneVPN Server [SOLVED]

Would that rule work? /ip firewall nat add action=dst-nat chain=dstnat dst-port=33445 in-interface-list=WAN protocol=udp to-addresses=10.0.0.6 to-ports=33445 Add it just before or just after any already existing rules in chain=dstnat - it is for a particular port, so it is unlikely to get shadowed ...
by nevolex
Thu May 28, 2020 8:31 am
Forum: General
Topic: Port forwarding to External OpneVPN Server [SOLVED]
Replies: 4
Views: 858

Re: Port forwarding to External OpneVPN Server [SOLVED]

Would that rule work?

/ip firewall nat
add action=dst-nat chain=dstnat dst-port=33445 in-interface-list=WAN protocol=udp to-addresses=10.0.0.6 to-ports=33445
by nevolex
Thu May 28, 2020 7:06 am
Forum: General
Topic: Port forwarding to External OpneVPN Server [SOLVED]
Replies: 4
Views: 858

Port forwarding to External OpneVPN Server [SOLVED]

Hi all. I have an Open Vpn server (on a raspberry pi in my lan) It has an ip of 10.0.0.6 and port 33445 Can somebody please advise how to do port forwarding to that port 33445 (UDP only) External port is also 33445 (I have a static public IP) These are my current rules: /ip firewall filter add actio...
by nevolex
Wed May 27, 2020 11:47 am
Forum: General
Topic: L2TP VPN doesn't work over WAN [SOLVED]
Replies: 4
Views: 539

Re: L2TP VPN doesn't work over WAN [SOLVED]

I have added those 2 lines, however, it didn't do any difference, in the firewall window (Winbox), I don't see any additional rules, then what I had before Sorry, the match protocol=icmp doesn't work this way. You have to do it the following way: /ip firewall filter add place-before=[find chain=inp...
by nevolex
Wed May 27, 2020 11:25 am
Forum: General
Topic: L2TP VPN doesn't work over WAN [SOLVED]
Replies: 4
Views: 539

Re: L2TP VPN doesn't work over WAN [SOLVED]

thought additional rules will be created automatically if it's done via Winbox ? Nope. Can somebody please advise /ip firewall filter add place-before=[find chain=input protocol=icmp] chain=input protocol=udp dst-port=500,4500 in-interface-list=WAN action=accept add place-before=[find chain=input p...
by nevolex
Wed May 27, 2020 11:05 am
Forum: General
Topic: L2TP VPN doesn't work over WAN [SOLVED]
Replies: 4
Views: 539

L2TP VPN doesn't work over WAN [SOLVED]

Hi guys, I created a L2TP connection in Winbox, my LAN clients can connect to it just fine, however, I cannot connect to VPN over Wan I guess it will be the firewall rules, I thought additional rules will be created automatically if it's done via Winbox ? These are my current rules: /ip firewall fil...
by nevolex
Tue May 26, 2020 2:11 pm
Forum: General
Topic: RB4011iGS No Internet available to hosts [SOLVED]
Replies: 7
Views: 1033

Re: RB4011iGS No Internet available to hosts [SOLVED]

HI Sindy, thank you for being so helpful, I did specify my router as dns server, allowed remote connections in DNS I am using these default rules would that be enough to drop any dns requests from wan?: /ip firewall filter add action=accept chain=input comment="defconf: accept established,related,un...
by nevolex
Tue May 26, 2020 11:23 am
Forum: General
Topic: RB4011iGS No Internet available to hosts [SOLVED]
Replies: 7
Views: 1033

Re: RB4011iGS No Internet available to hosts [SOLVED]

Is it a bug or work as intended? It may be both but the latter is more likely. If allow-remote-requests under /ip dns is set to no , the DNS server doesn't respond to any DNS queries coming from outside the router, including from the LAN clients. It is only safe to change this setting to yes if you...
by nevolex
Tue May 26, 2020 8:03 am
Forum: General
Topic: RB4011iGS No Internet available to hosts [SOLVED]
Replies: 7
Views: 1033

Re: RB4011iGS No Internet available to hosts [SOLVED]

I got it resolved by adding a vlan interface (my internet is on vlan10) Under Interface List" Add: vlan10 ISP subinterface to "WAN", because in NAT Policies, the interfaces have now been combined to LAN and WAN in newer firmware However I have an issue with DNS, when I go to DNS settings of the DHCP...
by nevolex
Tue May 26, 2020 7:02 am
Forum: General
Topic: RB4011iGS No Internet available to hosts [SOLVED]
Replies: 7
Views: 1033

RB4011iGS No Internet available to hosts [SOLVED]

Hi guys, I just purchased a RB4011iGS and having issues connect the hosts to the internet The connection type that my IPS is using is IPoE Vlan10 I used a quicky setup and created a DHCP server, NAT, Public IP is "Automatic". Created a VLAN interface, assigned it to DCHP Client Everything works from...
by nevolex
Mon May 25, 2020 2:45 pm
Forum: General
Topic: DHCP override [SOLVED]
Replies: 8
Views: 987

Re: DHCP override [SOLVED]

Ah, right, something like this?

/ip dhcp-server network server=my_dhcp address=10.0.0.18/32 netmask=24 gateway=10.0.0.2
by nevolex
Mon May 25, 2020 1:46 pm
Forum: General
Topic: DHCP override [SOLVED]
Replies: 8
Views: 987

Re: DHCP override [SOLVED]

sorry just to confirm as I am very new to Mikrotik. Would that work:

/ip dhcp-server server my_dhcp network 10.0.0.18/32 gateway 10.0.0.2

Where the specific client is 10.0.0.18, second gateway 10.0.0.2

Thank you
by nevolex
Mon May 25, 2020 1:11 pm
Forum: General
Topic: DHCP override [SOLVED]
Replies: 8
Views: 987

Re: DHCP override [SOLVED]

Thanks Jotne and Sindy!
by nevolex
Mon May 25, 2020 7:34 am
Forum: General
Topic: DHCP override [SOLVED]
Replies: 8
Views: 987

DHCP override [SOLVED]

Hi everyone,

is it possible to override a dchp gateway for 1 client.

Let's say a getaway for my network is 192.168.1.1, can I change it for 1 client only for 192.168.1.2 (I have another gateway with such ip on the network )?

Thank you all :)

Alex
by nevolex
Fri May 22, 2020 1:39 pm
Forum: General
Topic: Mikrotik Audience Poe IN [SOLVED]
Replies: 1
Views: 515

Mikrotik Audience Poe IN [SOLVED]

Hi all,

I haven't tested it yet, but is there any setting in Ros to enable Poe in or will it work by default?


Haven't received an injector yet to test it


Thank you
by nevolex
Wed May 20, 2020 1:46 pm
Forum: General
Topic: Winbox saved passwords [SOLVED]
Replies: 2
Views: 494

Winbox saved passwords [SOLVED]

Hi everyone, I have 2 Mikrotik devices, for some reason, Winbox only saves one password at a time, so when I try to connect to the second device the password is incorrect so I need to reenter one. Once Winbox knows the pass for the second device I cannot connect to the 1st one as the pass in incorre...
by nevolex
Sun May 10, 2020 12:29 am
Forum: Wireless Networking
Topic: Audience and hap 2 ac wireless bridge [SOLVED]
Replies: 8
Views: 1442

Re: Audience and hap 2 ac wireless bridge [SOLVED]

Thank you for explanation

what I ended up doing is removing all the ports from the bridge and adding them individually, so I can control the ports one by one and not as in only one "all" interface

I adjust the cost path and all worked as expected
by nevolex
Sat May 09, 2020 11:59 pm
Forum: Wireless Networking
Topic: Audience and hap 2 ac wireless bridge [SOLVED]
Replies: 8
Views: 1442

Re: Audience and hap 2 ac wireless bridge [SOLVED]

ap bridge --> station bridge

I created a bridge and then in ports clicked on "+" and added "all" all interfaces have been added at once

Image
by nevolex
Sat May 09, 2020 5:07 pm
Forum: Wireless Networking
Topic: Audience and hap 2 ac wireless bridge [SOLVED]
Replies: 8
Views: 1442

Re: Audience and hap 2 ac wireless bridge [SOLVED]

yes, but the ports are dynamic, I cannot adjust cost path for any dynamic port in the bridge.

Sorry if I am very new to mikrotik, just been having it for a few days:)
by nevolex
Sat May 09, 2020 4:11 pm
Forum: Wireless Networking
Topic: Audience and hap 2 ac wireless bridge [SOLVED]
Replies: 8
Views: 1442

Re: Audience and hap 2 ac wireless bridge [SOLVED]

It's bridged, so 2 simultanious connections won't work at the same time. Bridge spanning tree will decide which one to temporarly disconnect. (based on port STP path-cost) thank you bpwl, however I do I change the priority? you are right, 2.4 is the root, 5 is alternate, but both are greyed out? Th...
by nevolex
Sat May 09, 2020 3:06 pm
Forum: Wireless Networking
Topic: Audience and hap 2 ac wireless bridge [SOLVED]
Replies: 8
Views: 1442

Audience and hap 2 ac wireless bridge [SOLVED]

hi all, I have the main access point (Audience) and it is connected to hap 2 ac wirelessly (station-bridge mode), so hap 2 can provide connectivity to the wired-only devices I am connected to both networks 2.4 and 5, unfortunately, 2.4 network is always prefered, is there a way the hap 2 can use the...
by nevolex
Sat May 09, 2020 7:25 am
Forum: Wireless Networking
Topic: Band steering Mikrotik Audience and other aps [SOLVED]
Replies: 2
Views: 692

Band steering Mikrotik Audience and other aps [SOLVED]

Hi guys I know it has been a very requested feature, has anyone heard anything from Mikrotik yet, shell we hope for ROS 7? I use "no authenticate" and access lists to manually allow some devices to stay in 2.4 WLAN however I guess in big networks it is not a good idea, even in my environment with ab...
by nevolex
Thu May 07, 2020 1:15 am
Forum: Wireless Networking
Topic: Peculiar setup [SOLVED]
Replies: 3
Views: 1018

Peculiar setup [SOLVED]

Hi guys, I have a Mikrotik Audience, set up in such way: It is connected to a non mikrotik router, all interfaces (physical wireless and physical nonwireless are bridged in bridge 1) There is DHCP client and bridge 1 is assigned to it (network 10.0.0.0/24) There are 3 wireless networks of physical w...
by nevolex
Sat May 02, 2020 11:23 am
Forum: Wireless Networking
Topic: mikrotik Audience placement [SOLVED]
Replies: 1
Views: 900

mikrotik Audience placement [SOLVED]

Hi all,

I'm planning to buy one, it is meant to be standing on the desk, however, if I put it closer to the ceiling (leave it on the small shelf made for it) will that improve the coverage in general or there is no point?

Thank you
by nevolex
Fri May 01, 2020 9:48 am
Forum: General
Topic: One power supply for 2 devices [SOLVED]
Replies: 9
Views: 1463

One power supply for 2 devices [SOLVED]

Hi guys, I am planning to buy a RB4011iGS+RM it has a Max power consumption without attachments of 18 W and an Audience it has a Max power consumption without attachments of 28 W I would like to use one power brick for both devices, connecting it to the RB4011iGS and using POE out for the Audience. ...
by nevolex
Wed Apr 22, 2020 12:24 pm
Forum: Wireless Networking
Topic: Audience features [SOLVED]
Replies: 7
Views: 1904

Re: Audience features [SOLVED]

Thank you, I was meant to say that the frequencies of the 3rd band are slightly different, not in terms of channels but rather GHz :) 5.18 - 5.3 GHz for clients for by default 5.5 - 5.85 GHz for meshing by default 5.5 - 5.85 GHz is it a standard band or some sort of proprietory for Mikrotik audience...
by nevolex
Wed Apr 22, 2020 11:55 am
Forum: Wireless Networking
Topic: Audience features [SOLVED]
Replies: 7
Views: 1904

Re: Audience features [SOLVED]

Thank you for your advice, in terms of frequencies for the 3rd band which I slightly higher than standard 5Ghz, would the clients be able to see that network?
by nevolex
Wed Apr 22, 2020 11:15 am
Forum: Wireless Networking
Topic: Audience features [SOLVED]
Replies: 7
Views: 1904

Audience features [SOLVED]

Hi guys,

I am planning to replace my Aruba Instant-On with Audience. It is a 3band Ap, however, can the 3rd 1733 Mbit/s band be assigned to clients or it is only for mesh between Aps?

Thank you
by nevolex
Tue Apr 21, 2020 4:03 pm
Forum: Wireless Networking
Topic: DHCP lease over wireless bridge does not work for Ethernet clients [SOLVED]
Replies: 4
Views: 1593

Re: DHCP lease over wireless bridge does not work for Ethernet clients [SOLVED]

Hi millenium7, thank you so much for your advice, it was indeed the access point which doesn't allow multiple DHCP request to be assigned to clients. I tested with the other 2 access points and got no issues at all. It is an Aruba instant On, sort of semi-enterprise one, not sure what I can do about...
by nevolex
Tue Apr 21, 2020 7:47 am
Forum: Wireless Networking
Topic: DHCP lease over wireless bridge does not work for Ethernet clients [SOLVED]
Replies: 4
Views: 1593

Re: DHCP lease over wireless bridge does not work for Ethernet clients [SOLVED]

Hi, At this moment the only device that is connected to mikrotik is a PC. I can manually assign an IP to the connected pc and it will work. However what about the devices that don't support that. This is so strange that such a simple thing that a $20 dollar extender can do is so difficult to impleme...
by nevolex
Tue Apr 21, 2020 1:48 am
Forum: Wireless Networking
Topic: DHCP lease over wireless bridge does not work for Ethernet clients [SOLVED]
Replies: 4
Views: 1593

DHCP lease over wireless bridge does not work for Ethernet clients [SOLVED]

Hi guys I'm very new to Mikrotik (bought my first one yesterday) and intend to use is as Wireless Bridge to the main router to provide connectivity to a few clients which don't have wifi capabilities. Main Router ))))~~~((((( Mikrotik Router ------->PC Mikrotik is connected to the main router WIFI v...
by nevolex
Mon Apr 20, 2020 1:22 pm
Forum: General
Topic: DHCP client on bridge does not work?
Replies: 17
Views: 12008

Re: DHCP client on bridge does not work?

HI guys, I'm having the same issue, my Mikrotik is connected to the main router via wifi (wireless bridge (pseudobridge mode). Wlan and all ethernet ports are moved to the bridge. I do see a lease in the client section of the ros for the brdige, there is internet available for the router - I can pin...