I can see that you specified 5170, 5260 and 5500 MHz and then in configuration you specified to skip all DFS channels. But 5260 MHz (CH52) and 5500 MHz (CH100) are DFS channels. I don't know if that is the problem here but you could try to set for eg. to 5180 MHz (CH36) Also you should scan your ar...

Can you post your config ? Are you using default config ? What your log says when device disconnects ? Indeed. This is the error i got when a device disconnects (typically Android phones): https://i.imgur.com/LBKTQZW.png And this is my custom wifi config: /interface wifiwave2 channel add disabled=n...

I did all the suggested steps, tried also with beta and stable and i'm still suffering random disconnections in 5Ghz.

This beta has a lot of bugs in ac2. Is there any way to downgrade to 6.48 but keeping configuration?

/ip firewall nat add action=dst-nat chain=dstnat dst-address=your_public_IP to-addresses=192.168.1.60

And with it the hairpin rule:

/ip firewall nat add action=src-nat chain=srcnat dst-address=192.168.1.60 src-address=192.168.1.0/24 to-addresses=192.168.1.1

Tried and doesn't work :(

Yesterday i saw some posts about "hairpin nat" and tried to implement, but still doesn't work (currently are not implemented as you can see in the FW rules). How exactly did you try to implement hairpin nat? As your public IP is not assigned to your mikrotik but to the ISP router, you sho...

/ip address add address=192.168.1.1/24 interface= ether2 network=192.168.1.0 should be /ip address add address=192.168.1.1/24 interface= bridge1 network=192.168.1.0 For Hairpin NAT /ip firewall nat add action=masquerade chain=srcnat source-address=192.168.1.0/24 destination-address=192.168.1.0/24 a...

If you post your entire config I will have a look /export hide-sensitive file=anynameyouwish Sure: /interface bridge add name=bridge1 /interface wireless set [ find default-name=wlan1 ] band=2ghz-g/n country=spain disabled=no \ frequency=auto installation=indoor mode=ap-bridge ssid=1 \ wireless-pro...

Search for "hairpin nat". And as you are behind an ISP router, you should probably implement it there, not on mikrotik. Yesterday i saw some posts about "hairpin nat" and tried to implement, but still doesn't work (currently are not implemented as you can see in the FW rules). I...

Hi, I have the next setup: ISP router (192.168.0.1) -> Hap AC2 (192.168.0.2 for the ISP router - 192.168.1.1 for the LAN) -> devices And i have the next problem: if i try to access to my internal services, i only can via private IPs. If i try to access from the same LAN to one of my services like we...