Please make sure fasttrack is disabled I now have a problem that the mangle tag does not work on ROS 7.7. Please help me check # Identify HTTP/3 and Google's QUIC add chain=prerouting action=mark-connection connection-state=new new-connection-mark=QUIC port=80,443 protocol=udp passthrough=yes commen...
I think bad bufferbloat could also be due to poor ISP, but I may be wrong. Maybe reading a bit more about it will help you understand what happens and what you can do about it? https://en.wikipedia.org/wiki/Bufferbloat Its very strange. I change the queue types to fifo small and sfq and i have not ...
Hey there.... i just replaced my unifi USG with a rb5009 and now closely followed this thread about implementation of a QoS. So far it works really great, all connections and packages are marked by the mangle rules and applied to my queues. But there is also some strange stuff going on when running...
@kswong Hello friend, I have been working with your QoS and I have modified it, I would like you to review it and improve it before sharing it: D Mmm....sorry, not correct! no need to use JUMP at all. Below is my updated QOS code for ROS7. Usually only "MANGLE FORWARD" is used. "MANG...
Nat Masquerade 192.168.88.0/24 to 192.168.88.0/24 this works for every services at once. do not specify interfaces or port. internal port must be the same as the external port.
I've done some testing with a closer server. Four cases considered: baseline, QOS2020, QOS2020-Optimised (my recommended changes), mikroCAKE (pseudo-CAKE implementation). Graphs of the bandwidth vs latency, and a latency distribution plot. All tests were Perth to Sydney, 30 seconds of baseline eith...
I have change my crappy router with an Huawei ONT HG8012h For that i have change my serialnumber + password Serial 5054494E91194A08 (PTIN91194A08) Password: " " ascii / "20" in hex Configured WAN using RJ45 to SFP 1gb with VLAN 12 (settings for FTTH Meo Provider in Portugal) and...
ODI said bridge mode is not allowed by ZTE's warrant. Sorry. ... Well, I bought DFP-34G-2C2 from here and its web interface allows to choose between router and bridge: 1.png But the problem is the SN is not editable in web interface: 2.png Though it can be change via telnet commands: flash set GPON...