Community discussions

MUM Europe 2020

Search found 138 matches

by sdrenner
Wed Feb 03, 2016 7:09 pm
Forum: Wireless Networking
Topic: Howto? mAP Lite repeater mode?
Replies: 6
Views: 5304

Howto? mAP Lite repeater mode?

Has anyone gotten a mAP Lite working in repeater mode?
I have upgraded to 6.35rc3 and installed the wireless-rep package.

When i go to /interface wireless setup-repeater
I get this: no such item (4)

If anyone has successfully made this work please share you config
by sdrenner
Wed Oct 21, 2015 5:12 pm
Forum: Forwarding Protocols
Topic: Port Forward SNMP
Replies: 5
Views: 3796

Re: Port Forward SNMP

From the outside means: not local, from a remote connection.
The device we are tying to pull snmp info from is not set to only request from x.x.x.x networks it is open.
by sdrenner
Wed Oct 21, 2015 5:04 pm
Forum: Forwarding Protocols
Topic: Port Forward SNMP
Replies: 5
Views: 3796

Re: Port Forward SNMP

Plugged in locally i can do an SNMP walk and it works.
When trying to do so from the outside the SNMP walk timesout.
Any other thoughts?
by sdrenner
Tue Oct 20, 2015 12:04 am
Forum: Forwarding Protocols
Topic: Port Forward SNMP
Replies: 5
Views: 3796

Port Forward SNMP

I need to create a port forward to get to a device i need to pull SNMP from on the local side.
I took and created this, but it didn't work:
chain=dstnat action=dst-nat to-addresses=192.168.x.x to-ports=161 protocol=udp
dst-address=xxx.xxx.xxx.xxx dst-port=161
by sdrenner
Tue Nov 18, 2014 11:27 pm
Forum: General
Topic: CSR125-25G Not Loading Previous Sessions
Replies: 6
Views: 1101

Re: CSR125-25G Not Loading Previous Sessions

This is the first MT device i have that doesn't work correctly.
I have:
9 RB100
2 RB1200
10 RB133
6 RB2011
tons of RB411 and 411ah
Tons of RB433 and 433 AH
13 RB450
20 RB493

They all work just fine
by sdrenner
Tue Nov 18, 2014 10:32 pm
Forum: General
Topic: CSR125-25G Not Loading Previous Sessions
Replies: 6
Views: 1101

Re: CSR125-25G Not Loading Previous Sessions

Sorry, I am on v6.22
by sdrenner
Tue Nov 18, 2014 10:30 pm
Forum: General
Topic: CSR125-25G Not Loading Previous Sessions
Replies: 6
Views: 1101

CSR125-25G Not Loading Previous Sessions

My CSR125-24G doesn't reload with Previous Session settings.
For example if I take and put along the top of the screen: Uptime, Memory, CPU, Date, Time
and i then exit or X out, next time i log in they do not come back up.
This goes for any screens.
by sdrenner
Thu Jun 05, 2014 6:09 pm
Forum: General
Topic: Create disclaimer page like hotspot page to authenticate ?
Replies: 13
Views: 2679

Re: Create disclaimer page like hotspot page to authenticate

I am working on hotspot terms page have changed "OK" with Accept Terms.
Hid us and pw
I have this working but it only allows 1 login with the hidden Username.
How do i allow multiple login's with only 1 username in the system?
by sdrenner
Wed Nov 28, 2012 10:05 pm
Forum: RouterBOARD hardware
Topic: RB2011 switch port groups
Replies: 38
Views: 49108

Re: RB2011 switch port groups

Hi. does anybody knows if ports can be grouped on RB2011 to act like a simple switch ? The goal is to achieve wire speed switching on some ports. If it's possible which ports can be joined to a switch? Did you ever find a way to put all ports into 1 switch? I am wanting to do this on RB493g and RB2...
by sdrenner
Wed Jul 27, 2011 10:01 pm
Forum: Forwarding Protocols
Topic: OSPF version upgrade
Replies: 1
Views: 588

OSPF version upgrade

Has anyone upgraded from 3.x up to 5.x when running OSPF or from 4.x to 5.x
I have some MT's I am using as an OSPF router and haven't upgraded them, but would like to.
by sdrenner
Mon Aug 30, 2010 4:27 pm
Forum: General
Topic: Will this UPS work with the UPS package? ....Last 3 didn't
Replies: 11
Views: 1889

Re: Will this UPS work with the UPS package? ....Last 3 didn

Any UPS will work, but if you want to monitor status within RouterOS - ONLY APC SMART UPS WILL WORK What does anyone know about the NEW models of APC Smart-ups. I just bought a couple and they have a usb and rj45. The rj45 has a cable that converts to rs232. I can't seem to get any readings from it...
by sdrenner
Tue Aug 24, 2010 9:33 pm
Forum: General
Topic: ups !!!!!!!!!!!!!!!!
Replies: 30
Views: 7845

Re: ups !!!!!!!!!!!!!!!!

use any UPS you want, but Monitoring ability you will get only with SmartUPS Does anyone know if the new line of Smart UPS's by apc with work? I have used the older units and can see the stats from the ups. But I just got one of the new models in and I can't seem to see stats from the ups Using SMT...
by sdrenner
Wed Aug 18, 2010 11:46 pm
Forum: The Dude
Topic: The Dude v4.0 beta 2 released
Replies: 46
Views: 17278

Re: The Dude v4.0 beta 2 released

After installing the new Dude package, you should connect to it with the Dude 4.0beta2 windows client. Did you do that, or you used the browser to connect?

I tried connecting with both client 3.6 and 4.0beta2
by sdrenner
Tue Aug 17, 2010 3:53 pm
Forum: The Dude
Topic: The Dude v4.0 beta 2 released
Replies: 46
Views: 17278

Re: The Dude v4.0 beta 2 released

I tried connecting with both client 3.6 and 4.0beta2
by sdrenner
Tue Aug 17, 2010 3:43 pm
Forum: The Dude
Topic: The Dude v4.0 beta 2 released
Replies: 46
Views: 17278

Re: The Dude v4.0 beta 2 released

I uploaded the the dude 4.0beta 2 file for the RB1000 on to my RB1000 which is running 4.8 OS. Rebooted and the rb1000 came back up, but the dude never did. I tried logging into the dude with the with and without passwords. I gave it 45 minutes and during that time the cpu on the RB1000 never got ab...
by sdrenner
Mon Aug 16, 2010 11:33 pm
Forum: The Dude
Topic: The Dude 4 (beta)
Replies: 98
Views: 26447

Re: The Dude 4 (beta)

I just tried upgrading from 3.6 to 4.0beta2 on my RB1000.
I gave it 45 minutes and the dude never came back up. I am running 4.8 on my rb1000.
I am going to try and put 3.6 back on.

Any thoughts as to why?
by sdrenner
Fri Aug 13, 2010 5:04 pm
Forum: The Dude
Topic: The Dude v4.0 beta 2 released
Replies: 46
Views: 17278

Re: The Dude v4.0 beta 2 released

I just tried upgrading from 3.6 to 4.0beta2 on my RB1000.
I gave it 45 minutes and the dude never came back up. I am running 4.8 on my rb1000.
I am going to try and put 3.6 back on.

Any thoughts as to why?
by sdrenner
Mon Aug 09, 2010 3:56 pm
Forum: The Dude
Topic: PC temperature in Dude
Replies: 9
Views: 5044

Re: PC temperature in Dude

Thanks for this info. Were does this code go: Code: concatenate( if(ups_output_load() > 0, concatenate("load: ", ups_output_load() , "% "), ""), if(ups_charge()>0, concatenate("capacity: ", ups_charge(), "% "), ""), if(ups_output_load()>0, concatenate("time: ", ups_minutes(), " "), ""), if(ups_tempe...
by sdrenner
Fri Aug 06, 2010 11:14 pm
Forum: The Dude
Topic: PC temperature in Dude
Replies: 9
Views: 5044

Re: PC temperature in Dude

p.s. if anyone intrested in ups snmp, i can share it.
Can you share your snmp setting for ups?
by sdrenner
Wed May 26, 2010 2:37 pm
Forum: General
Topic: winbox for windows mobile - minBox
Replies: 29
Views: 14597

Re: winbox for windows mobile - minBox

How about a version for the Android?
by sdrenner
Mon Mar 22, 2010 4:36 pm
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7147

Re: Dude + CompactFlash + RB1000

into the CF?
by sdrenner
Fri Mar 19, 2010 10:33 pm
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7147

Re: Dude + CompactFlash + RB1000

Hey upgrade quesiton?
I installed dude on my rb1000 long time ago.
I just can't remember how I did it. And now i would like to upgrade to 3.5
Can someone give me some steps to upgrade?
Thanks
by sdrenner
Sun Mar 07, 2010 4:11 am
Forum: General
Topic: window7 and winbox
Replies: 8
Views: 1889

Re: window7 and winbox

Well, I figured out my issue. I have Sun VirtualBox installed, to run other operating systems. And it installs a virtual NIC, once I disabled it. Everything started working right again.
Thanks
by sdrenner
Tue Mar 02, 2010 4:02 am
Forum: General
Topic: window7 and winbox
Replies: 8
Views: 1889

window7 and winbox

I just upgraded to windows 7 and winbox's three dots (browse for mac) don't work.
tried winbox 2.2.11, 2.2.14 and 2.2.15

any thoughts.
by sdrenner
Wed Jul 01, 2009 3:46 pm
Forum: Scripting
Topic: Auto Backup and email
Replies: 2
Views: 2013

Re: Auto Backup and email

Manual works fine, I have 93% free space.
by sdrenner
Tue Jun 30, 2009 4:21 pm
Forum: Scripting
Topic: Auto Backup and email
Replies: 2
Views: 2013

Auto Backup and email

I have this script and it been working great for over a year and different RB's I also had this running great on RB433AH's until I upgraded to 3.25 now most are still working but on about 6 RB433ah's it would run. If I take and paste in "new terminal" I get this error: Saving system configuration Fa...
by sdrenner
Thu May 28, 2009 3:47 pm
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7147

Re: Dude + CompactFlash + RB1000

K, thanks
by sdrenner
Wed May 27, 2009 6:48 pm
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7147

Re: Dude + CompactFlash + RB1000

right now Store can be used for User Manager and Webproxy, Dude support will be added soon

Soon! This was last said back in December.
Any ETA on soon?
by sdrenner
Tue Apr 07, 2009 12:29 am
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7147

Re: Dude + CompactFlash + RB1000

So you are running dude on your rb1000 and the CF?
by sdrenner
Fri Apr 03, 2009 6:41 pm
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7147

Re: Dude + CompactFlash + RB1000

Any update as to when? It's been what 4 - 5 months since you said soon.
by sdrenner
Wed Jan 14, 2009 11:54 pm
Forum: General
Topic: Routing Subnets Help
Replies: 7
Views: 830

Re: Routing Subnets Help

I believe you cannot ping a port if it is not connected to anything. The ether port may be enable and an ip asigned but not active if it is not plugged into anything, and therefore not pingable
by sdrenner
Wed Jan 14, 2009 11:51 pm
Forum: General
Topic: Mikrotik-Rate-Limit Attribute
Replies: 17
Views: 18550

Re: Mikrotik-Rate-Limit Attribute

try
128000/256000
by sdrenner
Wed Jan 07, 2009 9:59 pm
Forum: General
Topic: PPPoe Attributes Question
Replies: 4
Views: 1187

Re: PPPoe Attributes Question

How can you set the priority for a pppoe connection default is 8.
I have an issue when I try to do some QOS within mangle and simple queues. That when any pppoe connections happens it show up below the qos simple queues and the bandwidth limits from the pppoe connect have no effect the are unlimited.
by sdrenner
Tue Jan 06, 2009 8:31 pm
Forum: Beginner Basics
Topic: Simple QOS, No Limitation
Replies: 20
Views: 5588

Re: Simple QOS, No Limitation

Why is it that you have the same chains listed more then once?
by sdrenner
Fri Dec 12, 2008 6:02 pm
Forum: The Dude
Topic: Not getting down email notifications with Dude 3.0
Replies: 5
Views: 1023

Re: Not getting down email notifications with Dude 3.0

Seeing how no one knows out to explain this I will try: If you want to receive notice that something is down you need to look first at how the Dude looks at the status of a device. Here is the order of things 1st 2nd 3rd Up -> unstable -> down So if you want notification when it's unstable put a che...
by sdrenner
Thu Dec 11, 2008 5:41 pm
Forum: The Dude
Topic: Not getting down email notifications with Dude 3.0
Replies: 5
Views: 1023

Re: Not getting down email notifications with Dude 3.0

I have the same issue with not getting down only up.
If I add unstable>down I get email within a minute, I don't want unstable>down
I want down after 5 minutes.
which is how I have it set up for.
by sdrenner
Mon Dec 08, 2008 9:18 pm
Forum: General
Topic: hotspot MAC by Radius Auth
Replies: 8
Views: 7832

Re: hotspot MAC by Radius Auth

For the HotSpot user profile, the following attribute should be used, Mikrotik-Group - Router local user group name (defines in /user group) for local users. HotSpot default profile for HotSpot users I got the bursting to work. I am having issues with the profile. Can someone put in an example for ...
by sdrenner
Fri Dec 05, 2008 12:15 am
Forum: General
Topic: hotspot MAC by Radius Auth
Replies: 8
Views: 7832

Re: hotspot MAC by Radius Auth

With your MAC Auth: how do you tell the MT from your Radius to use different user profiles for different speeds?

Also can you set bursting?
by sdrenner
Thu Nov 20, 2008 3:45 am
Forum: General
Topic: How to make a 16 or 24 port MT L-3 Switch
Replies: 10
Views: 1800

Re: How to make a 16 or 24 port MT L-3 Switch

That is what I am trying to find.
Any Thoughts?
by sdrenner
Thu Nov 20, 2008 12:49 am
Forum: General
Topic: How to make a 16 or 24 port MT L-3 Switch
Replies: 10
Views: 1800

Re: How to make a 16 or 24 port MT L-3 Switch

Not what I am looking for.
Thanks
by sdrenner
Mon Nov 17, 2008 6:27 pm
Forum: General
Topic: How to make a 16 or 24 port MT L-3 Switch
Replies: 10
Views: 1800

How to make a 16 or 24 port MT L-3 Switch

I am wanting to find a 16 or 24 port Hardware device that I can load MT onto to be a L3 switch/router
The biggest routerboard has is the RB493

Anybody done this or know where to find such hardware?

Thanks
Steve
by sdrenner
Wed Nov 12, 2008 10:11 pm
Forum: General
Topic: PPPoe Passthrough
Replies: 2
Views: 925

PPPoe Passthrough

I have pppoe working now. MT is PPPoe server > CPE is set up as bridge > customers router or PC does pppoe to log them in. My question is: Can I set the CPE (MT) up to do the pppoe-login and pass the ip to the customers router or PC? MT > (MT)CPE in bridge mode with PPPoe-client > pass pppoed ip to ...
by sdrenner
Tue Nov 04, 2008 6:01 pm
Forum: General
Topic: LCD Package
Replies: 12
Views: 4855

Re: LCD Package

Thanks, I got it working before you replied.
However are the arrows and enter or esc. buttons supposed to work?
by sdrenner
Mon Nov 03, 2008 7:33 pm
Forum: General
Topic: LCD Package
Replies: 12
Views: 4855

Re: LCD Package

What do the settings need to be set to for portwells?
by sdrenner
Wed Oct 29, 2008 4:10 pm
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7147

Re: Dude + CompactFlash + RB1000

ETA?
or
When?
by sdrenner
Tue Oct 28, 2008 4:26 pm
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7147

Re: Dude + CompactFlash + RB1000

Does anybody know?
by sdrenner
Sat Oct 25, 2008 12:04 am
Forum: The Dude
Topic: Probe Thread
Replies: 324
Views: 226983

Re: Probe Thread

Are these SNMP oid's via MT or straight to the APC ups?
by sdrenner
Thu Oct 23, 2008 8:30 pm
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7147

Re: Dude + CompactFlash + RB1000

Boss just ordered me an RB1000 to use for our office router/firewall and to put dude on.
When will we be able to use CF for the Dude??
by sdrenner
Tue Oct 21, 2008 6:51 pm
Forum: General
Topic: LCD Package
Replies: 12
Views: 4855

Re: LCD Package

What all can be seen via the LCD?
by sdrenner
Sat Oct 18, 2008 12:11 am
Forum: Wireless Networking
Topic: RB500 and 3.14 = 100% CPU
Replies: 1
Views: 822

Re: RB500 and 3.14 = 100% CPU

Have you upgraded the rb532 bios? That might fix it.
by sdrenner
Sat Oct 18, 2008 12:01 am
Forum: General
Topic: 5400 Channel
Replies: 2
Views: 722

Re: 5400 Channel

You need extra-channels license..
by sdrenner
Fri Oct 17, 2008 5:09 pm
Forum: General
Topic: BUG in 3.15 when having a APC smart UPS connected
Replies: 0
Views: 515

BUG in 3.15 when having a APC smart UPS connected

I had a 532A on top of a Grain Elevator (257 Steps up) That needed up graded. I was on a older OS. So I waited till after 9pm to upgrade because there are many business off of this Sector. So I upgraded to 3.15 and this radio never came back up. So I needed to roll, got up top and my ups was beeping...
by sdrenner
Tue Oct 14, 2008 8:16 pm
Forum: The Dude
Topic: OID question?
Replies: 4
Views: 1219

Re: OID question?

Thanks,

Now how about an OID or command for displaying if a UPS is on Battery or Power?
That would be great to have displayed on my DUDE!
by sdrenner
Fri Oct 10, 2008 9:02 pm
Forum: The Dude
Topic: OID question?
Replies: 4
Views: 1219

OID question?

Is there an OID for displaying what board is being used?
On 3.x os when winboxed in at the top of the screen it shows OS version and what RB or x86 is being used.
I would like to be able to poll that with an OID to my DUDE.

Thanks
by sdrenner
Sat Aug 23, 2008 12:29 am
Forum: General
Topic: 1:1 Nat issue in 3.12 and 3.13
Replies: 5
Views: 2546

Re: 1:1 Nat issue in 3.12 and 3.13

I was told awhile back that this rule: /ip firewall nat add chain=dstnat dst-address=x.x.x.x action=dst-nat to-addresses=192.168.107.12 to-ports=0 would block or not allow traffic to any ports then open up the ports that I wanted open like this: /ip firewall nat add chain=dstnat dst-address=x.x.x.x ...
by sdrenner
Sat Aug 23, 2008 12:11 am
Forum: General
Topic: 1:1 Nat issue in 3.12 and 3.13
Replies: 5
Views: 2546

Re: 1:1 Nat issue in 3.12 and 3.13

If I exclude to-ports=0 will the MT block all ports?
by sdrenner
Fri Aug 22, 2008 11:53 pm
Forum: General
Topic: 1:1 Nat issue in 3.12 and 3.13
Replies: 5
Views: 2546

1:1 Nat issue in 3.12 and 3.13

I had this working in 3.10 don't know about 3.11 Not working in 3.12 or 3.13 I had add these lines to 1:1 nat and block all ports except those I opened. Issue is with the first line MT won't let me add this line. I get "failure: to-ports valid only for tcp/udp" How can I do this now? #Generator /ip ...
by sdrenner
Thu Aug 21, 2008 11:24 pm
Forum: General
Topic: WiMax 802.16e Support! When?
Replies: 5
Views: 1235

Re: WiMax 802.16e Support! When?

normis

Can you contact us off the forum about this.
We have a very interest customer.
Shoot me an email off line and I can get you phone number..

Thanks
Steve
by sdrenner
Wed Aug 20, 2008 9:47 pm
Forum: General
Topic: WiMax 802.16e Support! When?
Replies: 5
Views: 1235

WiMax 802.16e Support! When?

When will MT start to support WiMax and 802.16e?
Does anyone know who makes an 802.16e mini-pci card?

We have a really big need for this, with sales of around 5000 units a month.
by sdrenner
Mon Jul 14, 2008 8:44 pm
Forum: Scripting
Topic: Script help for simple queue
Replies: 2
Views: 1267

Re: Script help for simple queue

Is there a place to get a list of all possible script options?
by sdrenner
Fri Jul 11, 2008 10:37 pm
Forum: Scripting
Topic: Script help for simple queue
Replies: 2
Views: 1267

Script help for simple queue

I used to use this script in 2.9 to pre-add simple queues for a group of IP's. Now it don't work in 3.0 Help. #New Script To Auto Create Simple Queues For A Subnet: #Enter the First 3 Octets of your Subnet Here! :local subnet "10.10.10." #The Interface on which you wish to apply the Queues :local in...
by sdrenner
Fri Mar 21, 2008 11:18 pm
Forum: Wireless Networking
Topic: VLAN help with pppoe
Replies: 0
Views: 707

VLAN help with pppoe

I have a network running just fine. I am trying to come up with a way to upgrade client radios. My thought is with vlans. I have all my client radios on private IP's the customers pppoe in and get handed an ip and sets a simple queue. Now I can mac telnet a client radio from the AP. I also have in t...
by sdrenner
Thu Mar 13, 2008 4:15 pm
Forum: General
Topic: Simple gateway failover Question
Replies: 0
Views: 464

Simple gateway failover Question

I am trying to set up a simple 2 gateway failover. My question is, can this be done when the 2 different sources are not static IP’s. 1 is pppoe and the other is DHCP.
by sdrenner
Wed Nov 07, 2007 10:21 pm
Forum: General
Topic: Queue on ether1 not working
Replies: 2
Views: 535

Re: Queue on ether1 not working

2.9.48
by sdrenner
Mon Nov 05, 2007 9:52 pm
Forum: General
Topic: Customers DHCP not passing
Replies: 2
Views: 501

Re: Customers DHCP not passing

Anyone?
by sdrenner
Fri Oct 26, 2007 12:44 am
Forum: General
Topic: Customers DHCP not passing
Replies: 2
Views: 501

Customers DHCP not passing

I have an AP setup for a client the system is setup as follows: Customer Router: sonicwall then MT AP set up as bridge with 2 5.3-5.8 sectors. Again all bridged with customers router doing DHCP. On sector 1 there is 3 client radios, client radios have LS5's in them. Sector 2 there is 5 client radios...
by sdrenner
Fri Oct 26, 2007 12:41 am
Forum: General
Topic: Queue on ether1 not working
Replies: 2
Views: 535

Queue on ether1 not working

I have an AP setup for a client the system is setup as follows: Customer Router: sonicwall then MT AP set up as bridge with 2 5.3-5.8 sectors. Again all bridged with customers router doing DHCP. On sector 1 there is 3 client radios, client radios have LS5's in them. Sector 2 there is 5 client radios...
by sdrenner
Tue Oct 23, 2007 6:55 pm
Forum: General
Topic: 1 Mikrotik with 2 DHCP servers 1 on ether1 the other on ethe
Replies: 3
Views: 906

1 Mikrotik with 2 DHCP servers 1 on ether1 the other on ethe

I have 1 Mikrotik with 2 DHCP servers 1 on ether1 the other on ether2.
Working fine, my question is, how can I block traffic so each of these networks can't ping or see each other?
The MT is a client radio doing pppoe and then as the 2 networks off of it.
by sdrenner
Thu Oct 11, 2007 5:37 pm
Forum: General
Topic: 2.9 upgrade to ROS v3 RC2 broke hotspot
Replies: 11
Views: 3180

Re: 2.9 upgrade to ROS v3 RC2 broke hotspot

So who is going to pay for a new key?
I have 2 units that have this issue.

I don't feel that we as the customer should have to pay for a new key for an issue with an upgrade that should have worked.

Steve
by sdrenner
Tue Oct 09, 2007 5:32 pm
Forum: Wireless Networking
Topic: allignment beeper
Replies: 1
Views: 646

allignment beeper

How does one get the allignment beeper to work? On say a RB133c
by sdrenner
Wed Sep 26, 2007 6:22 pm
Forum: General
Topic: WDS issue with 3.0 rc5
Replies: 1
Views: 1028

WDS issue with 3.0 rc5

I have many AP's running 2.9.x running WDS dynamic. None of these AP's see other AP's. I just set up 2 AP's running 3.0 rc5 running WDS dynamic and these see and add WDS links to other AP's not on the same SSID. All of my WDS's are set to "NO wds ingore ssid" I am thinkin this is a bug in 3.0 that i...
by sdrenner
Wed Sep 26, 2007 6:09 pm
Forum: Wireless Networking
Topic: WDS default cost and cost range?
Replies: 3
Views: 4392

WDS default cost and cost range?

What are these settings used for?
WDS Default Cost:

Cost Range:
by sdrenner
Thu Sep 06, 2007 10:42 pm
Forum: General
Topic: Layer 3 switch
Replies: 2
Views: 801

Layer 3 switch

Can we take and use Routeros as a layer 3 switch?
Yes I know that routeros can do OSPF, but say I took a 532 board with daughter card so I had like 9 ether ports. and wanted to use it as a switch with vlans and ospf. Make it run like a Full Layer 3 switch?
by sdrenner
Fri Jul 27, 2007 5:31 pm
Forum: General
Topic: 2 bridge links on the left side of the winbox?
Replies: 3
Views: 1255

Re: 2 bridge links on the left side of the winbox?

Did that and still seeing 2 bridge links
by sdrenner
Fri Jul 27, 2007 5:22 pm
Forum: General
Topic: 2 bridge links on the left side of the winbox?
Replies: 3
Views: 1255

2 bridge links on the left side of the winbox?

Why is there 2 bridge links on the left side of winbox?
I have seen this on 3.0.9 and the new 3.rc.1
by sdrenner
Wed Jul 25, 2007 4:56 pm
Forum: Wireless Networking
Topic: Has anyone used an XR5 in 5.4ghz
Replies: 2
Views: 538

Has anyone used an XR5 in 5.4ghz

I am testing in my lab os2.9.44 with superchannel and trying to use 5.4 range. I can't seem to get a link. If I turn on DFS it will link up but on channel 5180.

Any ideas as to what might be the issue.

Thanks
Steve
by sdrenner
Tue Jul 17, 2007 8:22 pm
Forum: General
Topic: API docs
Replies: 32
Views: 10882

Re: API docs

How do you connect to initiate TCP connection to the API port of the router
by sdrenner
Fri Jul 13, 2007 8:15 pm
Forum: Wireless Networking
Topic: XR2 / RB11 - Crashes, Lockups, Reboots
Replies: 17
Views: 3383

Re: XR2 / RB11 - Crashes, Lockups, Reboots

I have also tried XR5 in an RB11 and it didn't work yet I also tried not only 1 but 2 XR5's in an RB14 and it worked just fine.
by sdrenner
Fri Jun 15, 2007 12:26 am
Forum: General
Topic: MAC: authentication question
Replies: 4
Views: 1596

MAC: authentication question

I love this new feature. My question is will this be able to work with the Rate-Limit attibute? So I can set clients up to burst. I do this now with pppoe. And would love to move over to this new feature. I am playing with it right now authenticating via Vircom Radius and Rodopi. I can set an Ascend...
by sdrenner
Fri May 25, 2007 7:14 pm
Forum: The Dude
Topic: How graph signal strength
Replies: 9
Views: 4890

Re: How graph signal strength

Did you figure out how to graph signal strength?
by sdrenner
Fri May 25, 2007 4:22 pm
Forum: The Dude
Topic: Feature request
Replies: 5
Views: 1567

Re: Feature request

Could someone please give me some help on how to do this?

Thanks
by sdrenner
Thu May 24, 2007 11:01 pm
Forum: The Dude
Topic: Feature request
Replies: 5
Views: 1567

How about also adding a graph for signal levels. There are graphs for ping times and cpu level. But I really think signal levels would be great.
by sdrenner
Tue May 15, 2007 7:56 pm
Forum: Wireless Networking
Topic: How big is a Normal 2.4GHz Channel
Replies: 4
Views: 924

What is G mode?
by sdrenner
Tue May 15, 2007 6:52 pm
Forum: Wireless Networking
Topic: How big is a Normal 2.4GHz Channel
Replies: 4
Views: 924

How big is a Normal 2.4GHz Channel

How big is each channel
2.4GHz-B
2.4GHz-b/g
2.4Ghz-b-turbo

I know what
2.4GHz-5Mhz is
by sdrenner
Tue May 15, 2007 6:39 pm
Forum: Wireless Networking
Topic: PtP Link 65 km and at least 48 mb/s
Replies: 73
Views: 11941

What radios? Channels? Freq? etc..
by sdrenner
Fri May 04, 2007 5:21 pm
Forum: Wireless Networking
Topic: PtP Link 65 km and at least 48 mb/s
Replies: 73
Views: 11941

Still very cool.
Can you tell use what kind of PC you are using with this link? (CPU, Ram, motherboard) What Radio card? (SR5, CM9) Etc..

Thanks a bunch.
by sdrenner
Thu May 03, 2007 8:16 pm
Forum: Wireless Networking
Topic: PtP Link 65 km and at least 48 mb/s
Replies: 73
Views: 11941

i can provide you with this thing: http://img211.imageshack.us/img211/2025/bazapcnu4.jpg it's PC based solution, fully outdoor, powered from 24V DC source CPU is 1000MHz with heat on 25W level (there's option with 677MHz procesor with 15W TDP) The performance is: http://img206.imageshack.us/img206/...
by sdrenner
Wed Mar 07, 2007 4:29 am
Forum: General
Topic: DNS logs not showing customers IP they show the IP of the MT
Replies: 1
Views: 736

DNS logs not showing customers IP they show the IP of the MT

DNS logs are not showing the customers IP, they are showing the ip of the MT. On customers DNS logs my customer is concerned because the logs for all customers behind an MT AP show the ip of the MT and not the customers IP itself. So the customer feels that this is a huge issue with Calea because th...
by sdrenner
Fri Mar 02, 2007 10:00 pm
Forum: General
Topic: DHCP Option 82
Replies: 0
Views: 701

DHCP Option 82

Why is it that MT does not support Option 82?
Or does it and I just don't see it?
by sdrenner
Thu Mar 01, 2007 11:23 pm
Forum: General
Topic: DHCP relay
Replies: 0
Views: 495

DHCP relay

Is anyone using ISC Dynamic Host Configuration Protocol (DHCP) for the DHCP server when using DHCP relay?

I am trying to setup a MT to relay to a DHCP server running ISC's DHCP server.
by sdrenner
Thu Aug 24, 2006 11:59 pm
Forum: General
Topic: PPPoe and Static Ip's
Replies: 2
Views: 1038

PPPoe and Static Ip's

I have my MT doing pppoe-public and pppoe-private. What I would like to do now is be able to do pppoe-public and static ip for those customers that need a static ip. I am doing this with my billing and radius server telling the MT that the customer is either public or private via radius attributes. ...
by sdrenner
Wed Aug 23, 2006 12:40 am
Forum: General
Topic: I want to have each user get 256k bust to 512k
Replies: 1
Views: 875

I want to have each user get 256k bust to 512k

I want to have each user get 256k bust to 512k. I want every ip that gets DHCP'd out to get its own queue of 256k bust to 512k. This is set up as a router, doing DHCP nat. No auth or hotspot. I see how to put everyone in one queue and share 256k bust 512k but I want everyone to get there own. Help. ...
by sdrenner
Wed Aug 02, 2006 8:16 pm
Forum: Wireless Networking
Topic: SR5 Ubiquiti ETSI Compliant
Replies: 3
Views: 974

Is the Power output the same for 5.3 and 5.8?
by sdrenner
Fri Jun 09, 2006 4:23 pm
Forum: General
Topic: Ubiquiti SR9 support
Replies: 50
Views: 21384

which more channels do you want? we already support all channels that card can give you. beta of 2.10 is planned for end of summer Well how about the ablity to select any of the channels not just 4. Here are just a few thoughts. 900 901 902 5Mhz Ch 903 904 905 10MHz Ch 906 907 Now 908 5Mhz Ch 909 2...
by sdrenner
Tue Jun 06, 2006 9:57 pm
Forum: General
Topic: Ubiquiti SR9 support
Replies: 50
Views: 21384

Any ETA on 2.10? or at least a Beta?

Also when it comes out will there be more channels to use?
by sdrenner
Thu Jun 01, 2006 11:01 pm
Forum: General
Topic: Ubiquiti SR9 support
Replies: 50
Views: 21384

I thought you said that after 2.9.10 you would select 900 channels
by sdrenner
Tue May 16, 2006 6:22 pm
Forum: General
Topic: Basic Client Config
Replies: 1
Views: 608

Basic Client Config

I have never set up Mikrotik to be a client radio (CPE)
Is there a how to some where?
by sdrenner
Fri May 05, 2006 7:27 pm
Forum: General
Topic: Hotspot Profile
Replies: 0
Views: 497

Hotspot Profile

Under Hotspot Profile, there is a Rate-Limit: Would this rate-limit take place if no other Rate-limit is set from Radius login. I have rate-limits being set via radius, my question is if there was no command from radius would this become a default rate-limit. Or does it over-ride the radius rate-lim...
by sdrenner
Fri Mar 03, 2006 11:34 pm
Forum: General
Topic: ssh
Replies: 3
Views: 829

ssh

How can I stop all of these: login failure for user xxx from xxx.xxx.xxx.xxx via ssh
and
via ftp
by sdrenner
Sat Feb 04, 2006 12:36 am
Forum: General
Topic: Pocket PC
Replies: 9
Views: 1476

Pocket PC

How about a winbox that can run on a pocket PC.
by sdrenner
Thu Dec 22, 2005 10:32 pm
Forum: General
Topic: dictionary.mikrotik, Rate-Limit Attribute, FreeRadius
Replies: 5
Views: 2136

Yes Im using Rate-Limit with Radius with success.

Mine looks more like this:
64k/64k 256k/256k 128k/128k 10/10

For a 64k line with 10s burst.

If it works , you should find the Rate Limit in Winbox->Queues
What radius server are you using? I am using Vicom VopRadius
by sdrenner
Wed Nov 30, 2005 4:54 pm
Forum: General
Topic: Virtual AP
Replies: 5
Views: 1339

I found in the manual that you can have up to 7 VAP's

Does anyone have more than 2 VAP's running.

I am trying to add a 3rd VAP and when I do, all my registered users go away.
by sdrenner
Tue Nov 29, 2005 10:55 pm
Forum: General
Topic: Virtual AP
Replies: 5
Views: 1339

Virtual AP

How many Virtual AP's can you have?

I have a AP that has 2 V-AP's and when I add a 3rd I lose all my clients on all other AP's

Using on this unit CM9 and 2.8.27
by sdrenner
Thu Nov 03, 2005 5:56 pm
Forum: General
Topic: Src-mac-address Mangle question
Replies: 2
Views: 854

Thanks That worked great.
Steve
by sdrenner
Wed Nov 02, 2005 7:40 pm
Forum: General
Topic: Src-mac-address Mangle question
Replies: 2
Views: 854

Src-mac-address Mangle question

I have this working now in 2.8.27 it allows this mac address to pass by the hotspot page and customer gets online without login. src-mac-address=00:40:05:22:A7:F8 action=accept mark-flow=hs-auth Question is how do I do same thing in 2.9.6 I have done what it says in the manual. But I couldn't get it...
by sdrenner
Mon Oct 31, 2005 4:41 pm
Forum: General
Topic: Strip Domain on PPPoe
Replies: 0
Views: 573

Strip Domain on PPPoe

Is there a way to have mikrotik strip the domain from a customers username when they have the domain as part of the username before the mikrotik sends the request off to a radius server?

username@domain.com strips it down to just username


Thanks
by sdrenner
Wed Sep 14, 2005 11:46 pm
Forum: General
Topic: 2.9.2 hotspot setup
Replies: 2
Views: 866

thats how I set it up, just like I used to do in under the older versions.
by sdrenner
Wed Sep 14, 2005 10:51 pm
Forum: General
Topic: 2.9.2 hotspot setup
Replies: 2
Views: 866

2.9.2 hotspot setup

What is the setup for hotspot via winbox? I am trying to setup a new ap I can't figure out all the settings in 2.9.2 Also I have questions: 1) Under Hotspot, Servers, profiles - then under Radius what is "nas port type"? I started out by having a working ap running 2.8.27 and upgraded it to 2.9.2 an...
by sdrenner
Fri Aug 19, 2005 4:55 pm
Forum: General
Topic: PPPoE Keeps droping HELP
Replies: 2
Views: 786

I have my MTU set at 1460 and my MRU at 1440

Haven't had any issues with these settings
by sdrenner
Thu Aug 04, 2005 4:48 pm
Forum: General
Topic: Multiple PPPoe clients behind one Client Radio
Replies: 13
Views: 2088

How would I set this up on both the AP and Client?

Does the AP need to be running WDS?
If so does this affect the other clients out there?
by sdrenner
Thu Aug 04, 2005 4:24 pm
Forum: General
Topic: web server not running
Replies: 7
Views: 1336

Still not working with :80 at the end
by sdrenner
Thu Aug 04, 2005 4:06 pm
Forum: General
Topic: Multiple PPPoe clients behind one Client Radio
Replies: 13
Views: 2088

What client radio would work for this?
by sdrenner
Thu Aug 04, 2005 12:28 am
Forum: General
Topic: Multiple PPPoe clients behind one Client Radio
Replies: 13
Views: 2088

CB3 Seno board
by sdrenner
Wed Aug 03, 2005 4:46 pm
Forum: General
Topic: web server not running
Replies: 7
Views: 1336

It is set to port 80 default it is not disabled or invalid
by sdrenner
Wed Aug 03, 2005 4:16 pm
Forum: General
Topic: web server not running
Replies: 7
Views: 1336

Ver: 2.8.28
I can hyperterminal
What is the correct setting to have web server turned on?
I have never had to turn it on before.
by sdrenner
Wed Aug 03, 2005 12:39 am
Forum: General
Topic: web server not running
Replies: 7
Views: 1336

web server not running

Okay, I have done this tons of times and worked fine.

I am doing a new config, so I did a system/reset, then I put in an IP and winbox in to config it. But this time I am getting connection refused web server is not running!

What gives?
by sdrenner
Tue Aug 02, 2005 5:54 pm
Forum: General
Topic: Multiple PPPoe clients behind one Client Radio
Replies: 13
Views: 2088

"only one" is not checked. however what is "Change TCP MSS"

Thanks
by sdrenner
Tue Aug 02, 2005 5:31 pm
Forum: General
Topic: Multiple PPPoe clients behind one Client Radio
Replies: 13
Views: 2088

No I did not turn that on. And I double checked to make sure it was not on.

Thanks
by sdrenner
Mon Aug 01, 2005 11:35 pm
Forum: General
Topic: Multiple PPPoe clients behind one Client Radio
Replies: 13
Views: 2088

Multiple PPPoe clients behind one Client Radio

I have 1 client radio on an office building with multiple customers. I have the radio plugged into a hub then from the hub it goes to each customers router and the routers are using PPPoe to auth. This was working fine when I had only 1 customer using pppoe and 1 using hotspot to login, I added a 3r...
by sdrenner
Mon Jun 13, 2005 6:48 pm
Forum: General
Topic: Framed-ip-address question
Replies: 6
Views: 2271

Re: Framed-ip-address question

I have been trying "framed-ip-address" from my billing software (rodopi) to pass this through my radius (vircom) on to the mikrotik. This is not working customers always get ip form the pppoe-public pool. You may have missconfiguration somewere ... I am using freearadius with mikrotik pppoe server ...
by sdrenner
Thu Jun 09, 2005 8:22 pm
Forum: Scripting
Topic: Watchdog Timer
Replies: 1
Views: 1308

Watchdog Timer

How do you set a Watchdog Timer, I don't find it in the manual?

Say to have it reboot every x amount of hours.
by sdrenner
Tue Jun 07, 2005 5:15 pm
Forum: General
Topic: Mac Computer not seeing Hotspot SSID
Replies: 2
Views: 827

Mac Computer not seeing Hotspot SSID

I have a customer with a pc and mac. The pc can see the hotspot and get dhcp'ed an ip but the mac does not even see the hotspot.

What can or do I need to do or tell the customer to do.

I don't know a thing about mac's.
by sdrenner
Wed Jun 01, 2005 10:58 pm
Forum: General
Topic: Framed-ip-address question
Replies: 6
Views: 2271

Well I had to do some stuff in my billing server first: Create some radius attributes: Framed-pool with a value of what the pppoe-pools name is form the mikrotik example mine is pppoe-public or pppoe-private Then in my plan for the customers account they are set to a pppoe plan for either public or ...
by sdrenner
Wed Jun 01, 2005 10:25 pm
Forum: General
Topic: Framed-ip-address question
Replies: 6
Views: 2271

Framed-ip-address question

I have my Mikrotiks running both Hotspot and PPPoe. I have a dhcp-pool for hotspot customers. I have pppoe-private and pppoe-public pools as well. The in my billing program I have attributes set for pppoe customers that tell the mikrotik which pppoe-pool to put them in "private or public" this is wo...
by sdrenner
Wed Jun 01, 2005 7:22 pm
Forum: General
Topic: Mikrotik and Vircom Vopradius
Replies: 4
Views: 1142

PPP User Remote AAA Submenu level: /ppp aaa Property Description accounting (yes | no; default: yes) - specifies whether to use RADIUS accounting interim-update (time; default: 0s) - Interim-Update time interval use-radius (yes | no; default: no) - specifies whether to consult user database on a RAD...
by sdrenner
Fri May 27, 2005 7:33 pm
Forum: General
Topic: Mikrotik and Vircom Vopradius
Replies: 4
Views: 1142

I have it doing radius attributes setting bandwith.

The main thing I see is if the mikrotik gets rebooted and customers loses there connection and try to relogin they get username already used. So vopradius doesn't snmp very well with the mikrotik to check for online users.
by sdrenner
Wed May 25, 2005 4:44 pm
Forum: General
Topic: Mikrotik and Vircom Vopradius
Replies: 4
Views: 1142

Mikrotik and Vircom Vopradius

Is anyone out there using vircom vopradius with mikrotik for the radius server? If so are you seeing any issues? If so what are they?
by sdrenner
Mon May 23, 2005 7:28 pm
Forum: General
Topic: Help with cpe
Replies: 4
Views: 1138

I have been using brand X cpe; it will pass a pppoe request to the mikrotik os from a laptop requesting a pppoe session, but will not pass the request from a linksys or d-link (cheap customer priced router). Now brand x cpe is a high power radio 200mW to 250mW Is there any other cpe high power radio...
by sdrenner
Mon May 23, 2005 6:00 pm
Forum: General
Topic: Help with cpe
Replies: 4
Views: 1138

Hmmmm ;) Do you have "some" more information - you won't get much help with just this post...
Yes I do, however when I ask the question in its full form, the admin deleted the question, and said it had nothing to do with mikrotik router os.
by sdrenner
Mon May 23, 2005 5:50 pm
Forum: General
Topic: Help with cpe
Replies: 4
Views: 1138

Help with cpe

I have some cpe's that won't talk with the MIKROTIK ROUTER OS via pppoe.

Help
by sdrenner
Thu Apr 07, 2005 10:56 pm
Forum: General
Topic: Virtual AP using Prism b only card
Replies: 3
Views: 999

Were did you find out this info from? any documention? or just tring it out?
by sdrenner
Thu Apr 07, 2005 1:10 am
Forum: General
Topic: Virtual AP using Prism b only card
Replies: 3
Views: 999

Virtual AP using Prism b only card

I cann't seem to get VirtualAP to work using the Prism card. I have it working using Artheros AR5212.

Has anyone else see this or have it working.

Help!
by sdrenner
Sat Apr 02, 2005 1:43 am
Forum: General
Topic: profile on radius
Replies: 3
Views: 800

Give us some more info, as to what you are tring to do. Are you whating to set up diff relms as to what type of IP public or private or bandwitdh
by sdrenner
Fri Mar 11, 2005 4:59 pm
Forum: General
Topic: PPPoe Radius Rate-limit
Replies: 5
Views: 1228

How do I set them to work as Reply Attributes?

Thanks for you help.
by sdrenner
Fri Mar 11, 2005 4:40 pm
Forum: General
Topic: PPPoe Radius Rate-limit
Replies: 5
Views: 1228

More info on what I am tring to do.

Have a look at the docs in the AAA/RADIUS section ( http://www.mikrotik.com/docs/ros/2.8/guide/aaa , end of the document). You have to use the parameters Ascend-Data-Rate or Rate-Limit . This is all great and all but let me explain a little bit more: 1) I can use "Ascend-Data-Rate" it set the max r...
by sdrenner
Fri Mar 11, 2005 12:02 am
Forum: General
Topic: PPPoe Radius Rate-limit
Replies: 5
Views: 1228

PPPoe Radius Rate-limit

I am tring to get my biling server via my radius server to set customers Datarate. I have this working on Hotspot, but can't seem to get it working with PPPoe. I have add all the attributes to my radius-dictionary.txt file. I have gone in and add Radius attributes to my biling server and configured....
by sdrenner
Wed Mar 09, 2005 9:58 pm
Forum: General
Topic: Hotspot status page
Replies: 0
Views: 514

Hotspot status page

Is there a way to get the Rate to show on the status page.

ON my Hotspot I am going to offer different packages 64, 128, 256 etc...
But when a customer logs in on the status page I would like for it to tell the customer that they are connected at X speed

Thanks