MikroTik

hecatae

I upgraded mine with a EM12-G

hecatae

I'd recommend the second option

hecatae

@dazmatic

Do you have the firmware that Fibocom provided you, as I have this modem and would like to see if I have the same issue.

hecatae

Are you using Winbox, and connecting via mac address?

hecatae

if you disable the LCD display, does the speed increase?

hecatae

Mine is arriving Monday.

hecatae

@t0mm13b please delete your Software ID from all of your posts, it's your RouterOS license:
https://wiki.mikrotik.com/wiki/Manual:License

hecatae

Can you confirm the RouterOS version, are you on the latest stable or testing?

hecatae

Hi,

Are you aiming to wire them together or connect them over WiFi?

hecatae

https://halberdbastion.com/intelligence ... io-telecom

2x2 MIMO and 64QAM, according to Cellmapper, bands 3,7 and 20 are available:
https://www.cellmapper.net/map?MCC=636&MNC=1

At a minimum I would choose an LTE6 device, LTE12 if the budget allows.

hecatae

With the release of versions 7.7, but also with version 7.8, the wifi signal strength dropped dramatically by approximately 15-20% compared to version 7.6, both for the 2.4 band and for the 5Ghz band. I use hap ax2. Can I recommend you move to the testing branch for your ax2, it'll require a little...

hecatae

Chateau LTE12 RBD53G-5HacD2HnD No go, same as 7.7 Can I have some more details please, my Chateau LTE12 is running 7.8rc3 testing without issues, what issues have you seen on 7.7 and 7.8 stable? Are you updating Routerboard as well as RouterOS, kernel failure usually means your Routerboard version ...

hecatae

If you disable the LCD display, things speed up.

hecatae

@granjow thank you for the photos, the only other close ups of the board are on the Openwrt wiki.

hecatae

I was not aware until reading up that they had done this, which is why I'm currently querying the Chateau LTE18 ax as if it has a m.2 slot, I can upgrade my Chateau 5G by moving the R11mL modem across.

hecatae

Chateau 5G ax is also have ethernet issues, this is looking like a hardware issue for the IPQ-6010

hecatae

This has also been posted on Reddit, can MikroTik support please comment as seeing as these are being provided to LMT as CPE surely this issue has been flagged elsewhere?

hecatae

https://mikrotik.com/product/chateaulte18_ax

Could someone confirm if the Chateau LTE18 ax has an m.2 slot or is the modem soldered to the circuit board?

hecatae

The M.2 slot houses the R11mL-EG18-EA modem, as on the Chateau 5G, the M.2 slot house the R11mL-RG502Q-EA

hecatae

After upgrading Chateau LTE12 (RBD53G-5HacD2HnD) and Chateau 5G devices from 7.8beta2 to 7.8beta3 the LEDs indicating modem signal strength stop working (no LEDs for signal strength 1-5 are working, other LEDs are working as expected), rebooting device doesn't fix the issue. I am unable to recreate...

hecatae

I'm curious what you are using as a power supply, I have a hAP Lite running on 7.8beta2 working fine.

hecatae

I would recommend a netinstall:
https://help.mikrotik.com/docs/display/ROS/Netinstall

hecatae

But the question I pose when reading this: performance ? 10/100 Ethernet ports so it's going to be slow, but technically PWR-LINE is USB to Ethernet, just really expensive as you require 2 of them and another Tik at the other end. The OP may be better off with a mAP-2nd and a switch or a hAP ac Lite

hecatae

Hey so i wantd SMB on my hAP lite TC but i didnt se usb port. Is there a way to plug usb to ethernet adapter and it whould work? Im noobie. You can swap the power supply for a PWR-LINE: https://mikrotik.com/products/group/data-over-powerlines You would then need a compatible MikroTik at the other e...

hecatae

Chateau LTE12 updated without issue.

hecatae

Is that support for the Fibocom L850?

I've got one here I'm just curious about the fixed dialing mentioned

hecatae

LHG LTE died after the update...

Netinstall
https://help.mikrotik.com/docs/display/ROS/Netinstall

hecatae

@denissMT thank you for the confirmation.

hecatae

Which modem firmware are you using?

hecatae

any port of what?

hecatae

I'm very happy with the WiFi of the LTE12, as I'm in the United Kingdom, I set the 2.4 at 20mhz channel 13, and the 5 is at 80mhz channel 149.

Due to most residential UK isps using American configured WiFi equipment, there's never anyone using these channels in my apartment block.

hecatae

Would it be worth fitting a eg18 in a chateau LTE12 or should I get a chateau ax lte18 instead?

hecatae

Here's all the details you are after, there are 8 antennas:

https://confusedbird.com/thread-119-post-1151.html

hecatae

Any news on that? I also have an upgraded to R..13... Chateau 5g and it can see the 5g network but it won't connect I've had no update from MikroTik, I'm still running the Beta modem firmware they gave me at the start of October. The Quectel forums are also quiet with Quectel recommending that peop...

hecatae

The EC25 while lovely compared to a r11e-lte, doesn't support carrier aggregation.

What phone are you using to get five times the throughput?

hecatae

I wonder. The new generation has more RAM, and more storage. At what point will be more easy, and cost effective, to just ship one BIND version? I know, i know. Huge. Extremely feature rich. Bloated. But... I just looked up. My OpenSuse desktop says it needs about 790KiB to install BIND9. i know, I...

hecatae

Hi,

Can you confirm country and mobile network provider?

hecatae

I'd pick up the Audience and wait for 6e or 7.

hecatae

@denissMT

Why then does Getic sell them with and without the LR8?

https://www.getic.com/product/mikrotik-knot-lr8-kit

https://www.getic.com/product/mikrotik-knot

The knot that is not the LR8 kit should have a spare mini pcie slot?

hecatae

Hi,

I see you have a response on reddit from meritez:
https://www.reddit.com/r/mikrotik/comme ... th_2_sxts/

I would advise the same as what they have replied.

hecatae

@ralliart, you are probably best creating a new thread, the LHG with an EM12G is nothing like a Chateau LTE12 with an EG12 soldered to the motherboard.

hecatae

You are right! It´s an omnidirectional antenna. Anyway, it seems to be much better than the built in ones and it certainly helped in my case.

I have two of the mANT-LTE-5o connected to a Chateau LTE12, makes a big difference compared to the internal antenna.

hecatae

The MikroTik Pro App would be best for remote testing: https://apps.apple.com/us/app/mikrotik/id1323064830 https://play.google.com/store/apps/details?id=com.mikrotik.android.tikapp Regarding antennas, if you look at @Seán's teardown https://confusedbird.com/thread-119.html You may need to rewire the...

hecatae

Got the FM350, it happily turns up on Ubuntu 22.10.
Correctly registered, driver etc all working.
Nothing on RouterOS7 though

hecatae

Looks like Mikrotik Hap Lite is running out of free space to install further updates. What could be improved here apart from buying new hardware? It only has 32Mb of RAM, what do you expect ? It has been announced already by MT staff ROS7 is not intented for those devices (even if it may work). You...

hecatae

Sorry I missed something, why does a bridge need a 100 IP DHCP range?

hecatae

Yes, just, tight fit though, my em12-g barely fits.

Ep06 fits without issues.

hecatae

Hi, a youtuber talked just in passing that he used (mikrotik) to cover his house with wifi access. I assumed (maybe wrongly) that he could move from different part of the house without having to log on to a different repeater as you do with the repeater that I have tested so far. So if my assumptio...

hecatae

Audience owner here, does the new CapMAN implementation allow my 2 Audiences to still mesh together, or is it going to horribly break things and best be left alone?

hecatae

I'm totally new to the LTE stuff but have been using Mikrotik products for years and I love them. I have a hard time trying to understand what device I need by looking at the product list. My situation: I live in a big city in a high story building (there are lots of them around my location) I cann...

hecatae

I can confirm it is possible to have 3CA with 2x2 MIMO using a EM12-G in a LHG.

hecatae

Thank you for the update

hecatae

Well, in general I would hope that MikroTik put more priority in finishing the v6->v7 migration even when that reduces the priority on working on new features in v7. We now are in the situation where many routers cannot be upgraded from v6 to v7 and that is not good, neither for the customer nor fo...

hecatae

I see this on my Chateau LTE12 sometimes when I factory reset it.

hecatae

what mikrotik router are you using?

hecatae

if you change:

band=2ghz-b/g/n

to

band=2ghz-g/n

does the throughput improve?

hecatae

Beta4 successfully installed on a Chateau LTE12.

hecatae

The chipset is capable, does your mobile network support 4x4 mimo yet?
According to documentation LHG LTE18 have 2x2 mimo only.
4x4 mimo is for new ATL device..

That's bizarre as the Chateau LTE12 has 4x4 mimo, yet it's missing in the more advanced chipset.

hecatae

Can you combine B3+B7? https://cacombos.com/device/RBD53G-5HacD2HnD-TC-EG18-EA The chipset is capable, does your mobile network support 4x4 mimo yet? https://halberdbastion.com/intelligence/mobile-networks/a1-hrvatska-vipnet < may have old information, as they do not list b7, but they state a1 only ...

hecatae

You should consider the hAP lite and hAP mini basically as toys. […] correction: all SMIPS models (if there are other models) At this point any mikrotik with 32mb ram should be considered dead, for example I have 2 x rb750up, lovely devices for powering passive Poe to other stuff but basically dead...

hecatae

Hi, I have used a bunch of MT PL7400 (PWR-LINE EU) plugs with HAP mini and MAP lite. I guess HAP lite will work the same. I have use 6.48.x and 6.49.x ROS, they all worked stable on the software side. Beware however out of the 6 PWR-LINE EU plugs I have used, 3 are constantly going down and up. Tha...

hecatae

Found over on reddit:

FCC TV7L41GXD

Looks to be WiFI 2.4ax only, USB-C powered, direct replacement for hAP Lite.

hecatae

LTE12 only supports 2CA with 4x4 mimo. I'm looking up 4x4 MIMO LTE antennas and from what I can tell, they all come with 4 cables. Chateau LTE12 has just two external antenna connectors. Correct me if I'm wrong, but if your statement is true, then what sense does a device with LTE cat 12 and only t...

hecatae

Thank you very much. I will have a look and test.

Let us know, mikrotik use the socketed version for the sxt LTE us kit:
https://mikrotik.com/product/sxt_lte6_kit_us

hecatae

Hello kamild1996, Maybe your network operator does not allow carrier aggregation for those 3 bands. I also read that some network operator disable CA when there is no traffic, and only reactivates it when they detect traffic again. I have Movistar in Spain, with firmware: EG12EAPAR01A12M4G and rout...

hecatae

LTE12 only supports 2CA with 4x4 mimo.

hecatae

I get the same 192.0.0.2 address.

hecatae

updated hex from 7.2 to 7.6 but version remains the same

Hi,

You've updated RouterOS but not Routerboard, please follow https://www.youtube.com/watch?v=WPW3mHlEzn4

hecatae

Hi,

Which carrier?
Are you using internal antenna, external antenna, 4x4 MIMO, 2x2 MIMO?

hecatae

In most cases issue is solved by downgrading to the previous working ROS firmware. Then upgrade the LTE modem. Then upgrade again to the latest ROS firmware Wouldn't doing a hard reset using the reset button downgrade to the previous working ROS firmware? The reason I ask is I just did another hard...

hecatae

When I do a LTE Firmware Check I get this: EP06ALAR02A08M4G_01.003.01.003 I'll check and see what the firmware is on the new one coming in. Just an FYI, I am really unfamiliar with the forum, support, and such. I usually just google things to find my way around the Mikrotik equipment I have. This o...

hecatae

iPhone 12 is CAT20 or 5CA
R11e-LTE6 is CAT6 or 2CA

iPhone has the same modem as the MikroTik Chateau 5G.

hecatae

Hi. Just wanting to know if there was any outcome/resolution to this issue? I only randomly get the LTE interface back after many reboots but then disappears if the device reboots for any reason.

Have you upgraded to the latest modem firmware?

hecatae

Both of my Chateau LTE12 do not exhibit this issue, have you tried making the simcard thicker than usual so that the eject mechanism holds onto the simcard securely?

hecatae

what firmware version is on the lte1 interface?

Support can help with the FOTA file required to downgrade the modem.

hecatae

Ok
Please help me why I have slowly speed on my ax2 router...

Please can you disable 2.4ghz wifi, your 270 speed test sound like your iphone is choosing the 2.4ghz ax instead of the 5ghz ax

hecatae

I would put the LHG LTE into passthrough mode, and use the Primary Audience as the CAPSMAN controller, router and firewall.

hecatae

Sounds similar to the issue I had on 3 UK, I could see the 5g n78 signal on the new r13a firmware but was unable to connect to it.
I would recommend raising a SUP ticket with support, noting that it's affecting connecting to n41.

hecatae

I am looking for information on a compatible minipcie LTE modem Catergory 6 Mimo 4x4 that will operate in the LTAP LTE KIT? Any suggestions what I can use? Thanks in advance https://help.mikrotik.com/docs/display/ROS/Peripherals Quectel EP06 best I can find from this: https://halberdbastion.com/int...

hecatae

Hi,

Which modem firmware are you using?
viewtopic.php?p=960260&hilit=chateau#p960286

The above may help, I'm currently testing a beta modem firmware for support

hecatae

The Chateau LTE12 will do 4x4 mimo but only in 2ca.

Is this any help?

hecatae

Hi Unfortunatelly it is a requirement of the carrier that we need to connect with cat6 4x4 mimo to their Fixed LTE service. We do not have a choice.

Regards

Which country?

hecatae

Are you using the internal antenna or external?
Does the same issue happen on 7.6rc2 on testing branch?

hecatae

If you are willing to sacrifice eth1 for PoE, this would do the job:
https://mikrotik.com/product/mqs

Power the mqs via powerbank, power the hap ac2 from mqs.

hecatae

I had a similar issue on EE in the United Kingdom, I had to change the APN type from auto to ipv4 to get internet access on my business sim.

hecatae

rc2 working fine on rb2011 and rb750gr3 in typical office environments.

hecatae

Working fine on a Chateau LTE12

hecatae

They are for LTE.

Internal photos can be found here:
https://mikrotikon.pl/mikrotik-chateau- ... uteros-v7/

hecatae

No news, atleast for me. is there a possible way to downgrade the firmaware? some could share how to do it Email support@mikrotik.com Detail RouterOS and Routerboard version Mobile Operator and the 5g bands the modem can see but is refusing to connect to enable lte debug logging and send MikroTik t...

hecatae

Hi,

You will need to be on the latest stable release for any support to be offered. RouterOS7.2.3 is too old to offer help with

hecatae

is the ip address ipv4 or ipv6?

hecatae

It was running something much older 6.3x I would like to say. I just got if off someone used. It was working fine. I needed to eventually flash it with 7.5 (or at least to get it to work with new CAPSMAN) I tried all the reset via a button. There is something on the board that looks like one of tho...

hecatae

what RouterOS version was it running before you tried to update it?

hecatae

any news on that? I haven't upgraded to that firmware yet. Although I am "bugged" to do so Do you want to upgrade to R11A07? /interface/lte/firmware-upgrade lte1 upgrade=yes firmware-file="http://79.161.156.252/RG502QEAAAR11A06M4G-RG502QEAAAR11A07M4G.zip" Mikrotik only went to R...

hecatae

any news on that?
I haven't upgraded to that firmware yet.
Although I am "bugged" to do so

No news, but there's a definite Quectel fault, and they are blaming Qualcomm for changing the baseline.

hecatae

Hi, I do not think you are after the EG18, as that's a socket modem, not m.2 slot, possibly looking for the EM18? I've documented my LHG-LTE6 to EM12G upgrade over here: https://www.ispreview.co.uk/talk/threads/upgrading-mikrotik-lte-modems.38196/ I required: M.2 Key B to Mini PCiE Adapter IPX4 to I...

hecatae

Grab a usb stick:
in terminal:

/interface/lte/firmware-upgrade lte1 upgrade=yes file=/disk1/EG12EAPAR01A12M4G_01.001.01.001.zip

Response already on latest firmware.

But still stuck on EG12EAPAR01A11

hecatae

Hi,

What LTE firmware version are you using, and why are you not on the latest stable release 7.5?

hecatae

Not sure what has changed but had to reset my Chateau LTE12 after upgrading to beta8, the LTE interface would not initialize.
*) lte - added periodic IPv6 RS to trigger IPv6 adress acquisition for non-MBIM modems;

EE UK Connection, both ipv6 and ipv4 available.

hecatae

Same issue, 3 UK here, new firmware RG502QEAAAR13A02M4G 5G no longer found. Raised a support ticket with Mikrotik, I need a DFOTA to downgrade, or I take the Chateau apart and find a usb to m2 adapter. Same issue here, PL here! I just bought my Chateau 5G with qupanel 5G mimo 4x4.In the instruction...

hecatae

Did you manage to resolve this?
Refreshing this question. Did someone manage to fix the issue with 5G? on the Chateau 5G? (funny thing I just bought a router which should support 5G but doesn't have it - it's annoying)

Support had to downgrade mine to R11a06.

hecatae

*) lte - disabled RPLMN on Chateau 5G; RG502QEAAAR11A07M4G_01.001.01.001 Solved the problem that AT+QNWCFG="clr_rplmn" could not clear RPLMN when you used certain SIM cards Hi MikroTik, is the above fix, solving a problem that has already been resolved by Quectel on the latest R11A07 firmw...

hecatae

Support ticket raised, 7.6beta runs fine on my Chateau LTE12 while I await a response.

hecatae

I tried a downgrade with: /interface lte firmware-upgrade lte1 upgrade=yes firmware-file="http://10.0.0.3/RG502QEAAAR11A07M4G_01.001.01.001.zip" I know the file is available on my local webserver, but the upgrade always fails with: status: download failed: std failure: timeout (13) Not su...

hecatae

I seem to have lost 5G on this beta and the latest RG502QEAAAR13A02M4G modem firmware on my Chateau 5G.

hecatae

Same issue, 3 UK here, new firmware RG502QEAAAR13A02M4G 5G no longer found.

Raised a support ticket with Mikrotik, I need a DFOTA to downgrade, or I take the Chateau apart and find a usb to m2 adapter.

hecatae

Hi MikroTik, The Snapdragon X55 in the Chateau 5G does not support 2CC-5G CA or NR CA. But the Fibocom FM350-GL: https://www.fibocom.com/en/products/5G-FM350-GL.html Has the Mediatek M80 5G https://www.mediatek.com/technology/5g/5g-modem Which is the basis of the Dimensity 700 which does support 2CC...

hecatae

Hello. CubeG-5ac60ay with 7.5 as client = kernel failure every minute.
After downgrade to 7.4.1 = everything OK

ticket: SUP-91404

I take it this was both RouterOS and Routerboard updated to 7.5?

hecatae

Hap AC Lite upgraded without issues.
Anyone upgraded a RB2011 or RB3011 yet?

hecatae

Already tried a power injector to power sxt ?
I'm not sure hap can provide enough.

The ac2 can't provide poe out at all.

hecatae

Now I thought that I should be able to run: /interface/lte/firmware-upgrade lte1 upgrade=yes firmware-file="http://192.168.88.254/EG12EAPAR01A12M4G_01.001.01.001.zip" to update as this release is from 22nd July, but it will not take, any ideas? First, on v6, you could use a local file nam...

hecatae

Any update on this, what distance is this going to be?

hecatae

Mikrotik RBD53GR-5HacD2HnD, updated to latest modem firmware first (Router firmware was 6.49.4).
Then upgraded router to 7.4.1.
Now LTE not working.
Thinking of Netinstall to 6.49.6...
Modem is appearing for a seconds, then disappear.

Did you upgrade routerboard firmware as well as RouterOS?

hecatae

I'd be netinstall the latest stable release 7.4.1

https://help.mikrotik.com/docs/display/ROS/Netinstall

hecatae

Running absolutely fine on a Chateau LTE12. Off to create a new topic, Quectel are offering the latest EG12 firmware for download from their support forums: https://forums.quectel.com/t/dear-quectel-team-do-you-have-beta-version-12-for-eg12-ea-modem-in-mikrotik-chateau-lte12-device/16272 EG12EAPAR01...

hecatae

did you solve the issue and how?
command /interface lte at-chat lte1 input="AT&F 0" doesnt help to me.

Have you got any further?

hecatae

Upgrade to V034 since 13 days : No CA since the upgrade (RBLHGGR)

Reboot, upgrade to lastest ROS 7.4.1: no CA. No problem with CA with the previous version, of course.

If you upgrade to 7.5beta11 testing does it come back?

hecatae

Glad to hear it's fixed, upgrading the modem firmware was going to be my first suggestion.

hecatae

We have recently installed 5 Mikrotik LTE external antennas on our property. They are all working fine at the moment, but as the IT person, I would like to be able to connect to each Mikrotik antenna separately remotely. Idea being that if I am not onsite at the property, I can still help troublesh...

hecatae

Dear MikroTik, Can we have some clarity, apparently you do not recommend running v7 on mAP Lite: https://help.mikrotik.com/docs/display/ROS/Software+Specifications Note: We do not recommend running v7 on RB411l, RB411u, or RBmAPL-2nD. Is cAP Lite also affected as both devices are almost identical sa...

hecatae

shame the Chateau LTE18 ax modem is not removable, would have been a cheap upgrade for an existing Chateau 5G owner as you could have just replaced the modem in the chassis.

hecatae

Chateau 5G successfully updated to 7.5beta5

hecatae

anyone found the product page yet?

hecatae

https://www.quectel.com/product/5g-rm520n-gl

Hi Mikrotik, should the rm520n-gl work in my Chateau 5G, or would you require some information from it?

I can get hold of one, it's a Snapdragon x62, compared to the X55 that's on the rm502.

hecatae

Would you be willing to take one of the wAP LTE to 7.5beta4to see it the latest os and firmware sees the cards?

hecatae

rb2011il-rm updated without issue

hecatae

Nor do we, that's why rextended is asking for clarity.

hecatae

forward public ip:

Interfaces > LTE > LTE APNs
Passthrough Interface: ether1

https://damianmac.pl/2020/03/25/mikroti ... ugh-howto/

That will not work for the SXTLTE3-7 which is what this discussion is about, the original SXTLTE

hecatae

Can you connect to B3+B3?

hecatae

Is possible to have more detail about « fixed Netinstall procedure for ARM devices », please? Why would I want to know? To prevent any problems with previous stable versions, until stable 7.5.x is available. Thanks and good work. Here's hoping we get a detailed reply, I'm not updating a single ARM ...

hecatae

What happens if you netinstall 7.4 ? Just curious ...
It just works :)
Netinstalled 8 of those without any issue.

Yes netinstall just works, anyway where's the new testing release?

hecatae

Same here with a hap ac2 from 7.2.3 to 7.4.

Had to netinstall 7.2.3
What happens if you netinstall 7.4 ? Just curious ...

I'm going to test on two other ac2 and report back.

hecatae

Upgraded my RB5009 from 7.2.3 to 7.4 and looks like it's bricked. Can't even get it to show up in Netinstall.

Same here with a hap ac2 from 7.2.3 to 7.4.

Had to netinstall 7.2.3

hecatae

i have upgraded hap ac2 , and the router just die, that is second time last time was on 7.3.1

come over to testing, at least you know that you may have to netinstall.

hecatae

Hi MikroTik,

This runs fine on my Chateau 5G for home use, is there a new rc soon?

hecatae

Has anyone already tested cAP ac with RouterOS v7.4rc and did wireless single/multiclient benchmarks both with 2.4 and 5.0 GHz radio and compared the results to the results with OpenWrt v22.03rc5 ( https://firmware-selector.openwrt.org/?version=22.03.0-rc5&target=ipq40xx%2Fmikrotik&id=mikro...

hecatae

After upgrade from 7.3.1 to 7.4rc2 SXT-LTE6 died. I will have to reinstall it with netboot :(

Did netinstall fix this?

hecatae

Some links ;) ? https://openwrt.org/toh/mikrotik/rb941-2nd It is possible to change device boot loader from the OpenWrt, e.g. to downgrade it for enabling serial access. There are 2 bootloaders in the board: routerboot2 (main loader) and routerboot (backup loader, on the beginning on the flash). I ...

hecatae

OSPF: I've seen that on previous ROS 7 installs coming from ROS6. Probably you will not see that if you use netinstall on that device. CPU: Some (older) devices are not really suited for ROS7. You can always file a ticket, they should respond. Thanks holvoetn! I went straight back to 6.49.6. W I'm ...

hecatae

https://mikrotik.com/product/chateau_5g

Hi Mikrotik,

Are these:

Just these:

https://mikrotik.com/product/hgo_lte_w

But in black?

hecatae

Nothing mentioned about fixing the container issue with new mounts directories not being created.. I guess we need to wait for 7.4beta6 for more container fixes then?

This is 7.4rc, you can not go back to beta, maybe rc2 if enough broken stuff is reported.

hecatae

@nicobar can I recommend this:

viewtopic.php?p=943239

hecatae

Same error on my hap ac2 that is a wireless bridge.

hecatae

Well no, as the roof mounted antenna is pointing to the closest cell tower with the best signal strength. Which is why the latest scans show only B3... Ok, just looking at how you can benefit from your cat20 modem compared to the cat6 in your mr600. Are you running stable or testing routeros7? Have...

hecatae

Have you tried connecting to B28?

hecatae

I am based in the UK and have a 5G EE router supplied by EE(BT). This gives me speeds above 180MB download. The router is locked however and I cannot change the DNS, firewall settings or set up anything useful. So I thought to buy the Mikrotik Chateau 5G. I managed to get this working but then noti...

hecatae

Is your fiber internet provided via SFP or ONT?
Any reason you are using RouterOS 6.45.6?

hecatae

What brand is the external antenna?

hecatae

Chateau 5G comfortably running 7.4beta5

hecatae

ac2 upgraded to 7.4beta5.

hecatae

What operation mode is the d-link in?

hecatae

Is this an SXTLTE3-7?

hecatae

Have you seen this?

https://mikrotik.com/product/chateau_lte6_us

hecatae

winbox or cli,
interfaces, lte, modem, choose external antenna.

Default is none, you can choose auto, both, div or none

hecatae

Weird,

In default configuration using quickset, the ether1 port is a LAN port on the LTAP Mini.
Both Ether1 and WLAN1 need to be in a Bridge, with LTE as the default WAN.

hecatae

also something strange. I wanted to beef up the 4019's single-chain wifi with ww2 package on a cube60 pro ac, so i installed ww2 on it - and i lost access to w60 interfaces. presumably this is expected so, as installing/enabling ww2 disables the 'default' wireless package, which also has the driver...

hecatae

The LHGG has a 4G LTE6 modem installed as standard. You would need to replace this with a 5G modem. As I'm not familiar with US networks, I'm unable to recommend a 5G modem.

hecatae

https://mikrotik.com/products/compare/C ... eG-5ac60ay

Storage size 60G 16 MB 60Pro 64 MB
60Pro is 60ay wireless
60G is 60ad wireless

Cannot see anything else different

hecatae

DoQ - DNS over Dedicated QUIC Connections The actual RFC 9250 has been released. Seeing as it's basically an extension to DoH , it would make sense to implement this as well. Adguard already support it: https://adguard.com/en/blog/dns-over-quic-official-standard.html url is quic://dns-unfiltered.ad...

hecatae

Here's a few solutions: 1. Email support at mikrotik and ask for the modem firmware, support can offer a particular RouterOS7 version that allows modem firmware update from files. 2. Make a backup of your current configuration and export it. As soon as you have the exported configuration, reset the ...

hecatae

hap lite, hap ac2, chateau lte12 upgraded without issue.

hecatae

I'll try it soon, now I'm trying to log the problem

Okay, keep us updated

hecatae

can you provide smaller packages for wifi2, this will increase the number of people that can test it and provide more feedback, my mikrotik does have 256m ram but 16m hd There's quite a few Chateau owners who would happily test a wifiwave2 driver bundled with the main .npk instead of the usual WiFi...

hecatae

Do you have the same issue on 7.4beta2?

hecatae

reading https://wx.comake.online/doc/d8clf27cnes2-SSD20X/customer/development/software/Px/en/4G/EC200T%204G.html It only supports ppp, ecm and rndis. example AT commands below: ## 4. microcom /dev/ttyUSB AT+QCFG="usbnet",1 OK at+cpin? +CPIN: READY OK at+csq +CSQ: 31,99 OK at+qicsgp=1,1,&qu...

hecatae

Since 7.2.2 my Chateau 5G was losing LTE connection few hours after reboot. Same problem with 7.2.3. Locking cells, selecting bands or network didn't change the outcome. With 7.3 the issue is getting worse: without cell lock I noticed a frantic LTE cells switch during operation and again the freque...

hecatae

Seems dongrade is possible. But how I could get a firmware version of EG12EAPAR01A10M4G ? I checked the forum, but no firmware but complaints only. Update_EG12EAPAR01A09-R01A06.zip is over here: https://forum.ixbt.com/topic.cgi?id=14:66288-53 I'm not sure using firmware from strange sources is reco...

hecatae

Chateau updated without issue.
Is DNS over TLS supported yet?

hecatae

hAP Lite took 4 minutes to update from 7.3

hecatae

Updated hAP Lite TC (RB941-2nd TC) successfully.

hecatae

Starlink Power brick is Passive PoE: https://hackaday.com/2021/05/24/starlin ... ome-hacks/
https://gist.github.com/darconeous/8c78 ... 3be55066ee

non-standard PoE(The orange and green pairs are positive, the blue and brown pairs are negative)

hecatae

7.3rc2 running fine on Chateau and hAP Lite

hecatae

Could it be an extension of the mobile app?

TP-Link offer TP-Link Tether, which connects into various devices using api username and password.

hecatae

Please may we have a Modem Firmware changelog for all LTE products

hecatae

Updated Chateau LTE12 and hap lite.

Chateau advised new modem firmware after updating to the rc, this wasn't mentioned in the changelog...

Any chance of a rundown of what the new eg12-ea firmware does and do I need to upgrade?

hecatae

I suspect the problem is firmware. But how I can downgrade it to test? RouterOS v7.2.3 Chateau LTE12 It's possible to downgrade, but you would need to host the modem firmware on a public http server or be using a version of RouterOS that allows firmware upgrade from file. /interface/lte/firmware-up...

hecatae

is ww2 working on the 7.3rc1?

hecatae

Have you tried net installing the latest V6 release?

hecatae

What's powering the RB960PGS?

hecatae

Are you using WifiWave2 on the Audience?

hecatae

Hi,

Are you using SIM slot up or down aka a or b?

hecatae

Quickset Bridge Mode is broken. It removes Bridge from inteface-list=LAN and adds each of the individual Interfaces to this list. That is an incorrect configuration because the individual Interfaces are slaved to the Bridge in Bridge Mode. I have reported this behavior to support to no avail. On wh...

hecatae

Hi, So if we start from Quick Setup and the default configuration: If you need Wi-Fi in a huge building with all kinds of obstacles, simply add more Audience devices to your network – with a press of a button they will sync seamlessly and create a single Wi-Fi network to cover the whole premises. Th...

hecatae

I was wondering when someone would post this, AliExpress is full of these on offer for not much money. Modem manager has recently added support for the T99W175: https://github.com/freedesktop/ModemManager/blob/master/NEWS Do you currently have a mikrotik you can put it in to see if it's recognised b...

hecatae

Hi there. I'm working on a project for which either hAP or mAP would be a perfect match were they to feature a connector for an external antenna. The reason for needing an external antenna is the AP will sit hidden inside a grounded electrical cabinet -- which I can't imagine will result in good Wi...

hecatae

7.3beta40 is available, why is it buried in this thread.

Hap lite updated.

hecatae

I'm not using T-Mobile, I'm using 3 UK, and my Chateau 5G is running 7.2.3.

Just trying to help with using the same modem.

hecatae

This issue has nothing to do with the RB960, if you're seeing 950/950 wired.

Sadly I don't use Asus since purchasing a dud from them, the Asus VDSL modem showed 80/20 sync, but the throughput within the router was a 10th of the sync.

hecatae

Hi Mikrotik,

Any more 7.3beta or are you looking at 7.4beta?

Happy to test whatever you are currently looking to pass to Stable so that Stable users do not cry.

hecatae

Did you get this resolved?

hecatae

Ah I think I now understand and correct me if I'm wrong - I need to buy a mikrotik router WITHOUT a modem then install one that has that channel. Correct?

Yes, a purchase an SXT/LDF/LHG R device without modem and then choose a suitable modem that is supported.

hecatae

Glad to hear you have fixed it.

hecatae

Only to be opened with the sole purpose of inserting a sim.
There is a special lid for that purpose.

Open the case further, and your warranty is void.
Logic.

So how would you insert the modem then?

hecatae

Here's my hap lite config if it helps: # may/09/2022 21:07:55 by RouterOS 7.2.3 # software id = # # model = RB941-2nD # serial number = /interface bridge add name=bridge1 protocol-mode=none /interface wireless security-profiles set [ find default=yes ] authentication-types=wpa2-psk eap-methods="...

hecatae

If you purchased a LHG R, SXT R, LTAP Mini R, etc, and if opening it would void your warranty, I'd be quite annoyed.

hecatae

Hi,

Which mobile network are you using, you may need to add additional sma pigtails.

Photos of the internals can be found here:
https://mikrotikon.pl/mikrotik-chateau- ... uteros-v7/

hecatae

What information from my Chateau 5G would be beneficial?

hecatae

Hello. Just purchased the wAP LTE kit US The mikrotik has a hard-coded ip address of 192.168.88.1 but my local wireless and wired network is 192.168.50.0/24. I know how to access the mikrotik via direct connection to laptop but doing so requires me to drop my routable 192.168.50.xx ip address so I ...

hecatae

/system leds
# using RSRP, modem-signal-threshold ignored
set 0 disabled=no interface=lte1 leds=led1,led2,led3,led4,led5 modem-signal-threshold=-91 type=modem-signal
/system leds settings
set all-leds-off=never

That's all I see on an export verbose

hecatae

Just noticed - MPLS subsystem is removed from RB941-2nD
Out of the window goes your plan to use the RB941-2nD as the preferred routing platform for your enterprise!

Strange omission though seeing as MPLS is still available on 7.3beta for the rb941

Search found 356 matches