Community discussions

MikroTik App

Search found 82 matches

by mushmx
Mon Apr 20, 2020 9:26 pm
Forum: General
Topic: PPTP VPN Drop Connection issue [SOLVED]
Replies: 6
Views: 5924

Re: PPTP VPN Drop Connection issue [SOLVED]

Hi

Thanks for all your suggests, Finally It works.

I had to call the ISP to check the INET Configuration with them and they reset something on his side and the VPN Works.

Thanks and regards.
by mushmx
Sat Apr 18, 2020 10:06 pm
Forum: General
Topic: PPTP VPN Drop Connection issue [SOLVED]
Replies: 6
Views: 5924

PPTP VPN Drop Connection issue [SOLVED]

Hi Recently I doing a VPN PPTP site to site and the connection stablished and I can do Ping between LAN(Server) to LAN(Remote) and I can get access via SSH to Remote MKT but the issue it when I try to Connect to vía WinBox to Remote MKT the ping looses and the tunnel goes down and the same happends ...
by mushmx
Thu May 18, 2017 6:27 am
Forum: General
Topic: Enable multicast to print with Airprint
Replies: 4
Views: 5413

Enable multicast to print with Airprint

Hi

I want to print vía Airprint and I was searching in google and I found that Airprint need Multicast. Actually I loaded the multicast package and enable PIM but I can't print from my Ipad.

Does anybody know, what else I need to configure to permit the multicast on the interface bridge?

Thanks
by mushmx
Mon Aug 17, 2009 8:30 pm
Forum: Beginner Basics
Topic: Mikrotik as cisco VPN client
Replies: 28
Views: 56860

Re: Mikrotik as cisco VPN client

i think you are referring to XAUTH, which is afaik not supported on mikrotik ros.
so at least at the moment your only choice is a plain ipsec-connection.
Ok. Actually I have a plain IPSec connection.

Thanks. 8)
by mushmx
Mon Aug 17, 2009 6:48 am
Forum: Beginner Basics
Topic: Mikrotik as cisco VPN client
Replies: 28
Views: 56860

Re: Mikrotik as cisco VPN client

Hi About 1 month ago I tried to configure the MKT like VPN Client but I couldn't do because Cisco ASA use other options like (group, user and password) so I couldn't found how to do it?. When I do only the IPSec connection (MKT to ASA) works fine but the trouble begins when ASA uses (group, user and...
by mushmx
Tue May 26, 2009 7:08 pm
Forum: General
Topic: strange IP segments into my hotspot pool...
Replies: 2
Views: 991

Re: strange IP segments into my hotspot pool...

Thanks for the tip

I add the next rule in IP Binding

add address=10.5.50.0/24 disabled=no server=hotspot1
add address=0.0.0.0/0 disabled=no server=hotspot1 type=blocked

I hope that help me.

Thanks again
by mushmx
Tue May 26, 2009 7:20 am
Forum: General
Topic: strange IP segments into my hotspot pool...
Replies: 2
Views: 991

strange IP segments into my hotspot pool...

Hi guys I have a strange case with my Hotspot the last days, Into the section "IP/Hostpot/Host" many IPs with diferent segments that my pool don't have, some like this: My pool (10.5.50.2-10.5.50.254) Example: # MAC-ADDRESS ADDRESS TO-ADDRESS SERVER IDLE-TIMEOUT 0 P ;;; Biblioteca 00:0C:42...
by mushmx
Wed Apr 22, 2009 4:59 pm
Forum: General
Topic: Newsletter #17
Replies: 23
Views: 7104

Re: Newsletter #17

Yeah, I have the V3.23 and the same don't appear the tool WOL :? . But anyway it a great news :D
by mushmx
Wed Apr 22, 2009 4:53 pm
Forum: Beginner Basics
Topic: mikrotik wake on lan!
Replies: 11
Views: 5437

Re: mikrotik wake on lan!

Hi

I'm reading that Mikrotik finally has decided include the Wake On Lan into RouterOS.

Thanks Mikrotik Team :D

Best regard.
by mushmx
Thu Mar 12, 2009 6:04 am
Forum: Beginner Basics
Topic: mikrotik wake on lan!
Replies: 11
Views: 5437

Re: mikrotik wake on lan!

What you're describing is not Wake on Lan option. With WOL enabled PC can be turned on by sending a special packet to its ethernet port. What you're talking about is BIOS setting which tells PC what to do when power "returns". In both cases RouterOS has got nothing to do with it. ok, I go...
by mushmx
Thu Mar 12, 2009 5:35 am
Forum: Beginner Basics
Topic: mikrotik wake on lan!
Replies: 11
Views: 5437

Re: mikrotik wake on lan!

Althrough I support your request as usable, I would suggest to use PC motherboard that has BIOS option to turn on automaticaly on power. If BIOS does not have such option, you may also make some simple hardware to make it turn on when power comes (simulate power on button pressed), but that hardwar...
by mushmx
Wed Mar 11, 2009 5:31 pm
Forum: Beginner Basics
Topic: mikrotik wake on lan!
Replies: 11
Views: 5437

Re: mikrotik wake on lan!

no. what kind of router is this, that is offline most of the time? also - i think that is the feature of BIOS (motherboard), not RouterOS. Well I am disagree because I have installed RouterOS over PC. For example, sometime the power electric is off for long time and the battery backup is discharged...
by mushmx
Wed Feb 25, 2009 6:43 pm
Forum: General
Topic: Mesh HWMP + WebProxy
Replies: 0
Views: 606

Mesh HWMP + WebProxy

Hi guys

I'm testing the MESH HWMP setting in my Network but the Webproxy not working. In the NAT section of firewall the rule don't account Bytes & Packets.

Someone has done something similar? :?

Best regard.
by mushmx
Sun Feb 08, 2009 11:03 pm
Forum: General
Topic: What I need to use 4.9Ghz in RouterOS???
Replies: 5
Views: 2147

Re: What I need to use 4.9Ghz in RouterOS???

change the local regulation of the other country is illegal and unethical. Buy a Superchannel license :D very low cost! regards pd: save money to spend on expensive 4.9 cards Thanks for the reply, but I must use 4.9Ghz because is the license to police deparment; so I just need know if with the leve...
by mushmx
Fri Feb 06, 2009 5:28 am
Forum: General
Topic: What I need to use 4.9Ghz in RouterOS???
Replies: 5
Views: 2147

Re: What I need to use 4.9Ghz in RouterOS???

change the local regulation of the other country is illegal and unethical. Buy a Superchannel license :D very low cost! regards pd: save money to spend on expensive 4.9 cards Thanks for the reply, but I must use 4.9Ghz because is the license to police deparment; so I just need know if with the leve...
by mushmx
Thu Feb 05, 2009 12:53 am
Forum: General
Topic: What I need to use 4.9Ghz in RouterOS???
Replies: 5
Views: 2147

What I need to use 4.9Ghz in RouterOS???

Hi

I will start a project and we must use the 4.9Ghz frecuency but I have a doubt about if I need upgrade the license Level 4 or the RouterOS will recognize the card by default.

plz, any suggestions will help me :D

Thanks

Best regard.
by mushmx
Tue Jan 13, 2009 11:56 pm
Forum: General
Topic: Transparent proxy in MKT V3.14 "Solved"
Replies: 10
Views: 2765

Re: Transparent proxy in MKT V3.14 "Solved"

Dont forget in V3 you have to go to the bridge settings and tell it to use the firewall, perhaps that is why nothing appears to be passing through the firewall? Cheers Justin Hi JwTPN Thanks for the reply, finally the proxy are workign :D I just enabled in Bridge setting "USE IP Firewall"...
by mushmx
Tue Jan 13, 2009 9:53 pm
Forum: General
Topic: Transparent proxy in MKT V3.14 "Solved"
Replies: 10
Views: 2765

Re: Transparent proxy in MKT V3.14

This is an example about I want to do. When I configured a Hotspot into MKT all work fine but if I want do without Hotspot like the picture then the proxy not work. :(

Thanks for all.
by mushmx
Tue Jan 13, 2009 5:30 pm
Forum: General
Topic: Transparent proxy in MKT V3.14 "Solved"
Replies: 10
Views: 2765

Re: Transparent proxy in MKT V3.14

hmmm... you don't use bridge, do you?..
Yes I'm using a bridge (Ether1, Ether2 and WLan1). In the Ether1 is connected the cable to Modem "2wire", the Ether2 and WLAN1 are my client network.

Thanks
by mushmx
Tue Jan 13, 2009 4:56 pm
Forum: General
Topic: Transparent proxy in MKT V3.14 "Solved"
Replies: 10
Views: 2765

Re: Transparent proxy in MKT V3.14

if you set your web browser to use proxy, does it work? Hi If I change the setting in my browse it work fine but I don't want do this with all clients; I need that the proxy are transparent without any modification in the client browser; like in the other version V2.9.51 Best regard. :D Thanks for ...
by mushmx
Tue Jan 13, 2009 4:41 pm
Forum: General
Topic: Transparent proxy in MKT V3.14 "Solved"
Replies: 10
Views: 2765

Re: Transparent proxy in MKT V3.14

the next rule not working in mkt V3.14 ip firewall nat> add chain=dstnat protocol=tcp dst-port=80 action=redirect to-ports=8000 what do you mean saying 'not working'? do it count packets, or not? Hi The rule not count packets and the proxy not block the website and not save any cache. So I tried wi...
by mushmx
Tue Jan 13, 2009 1:25 am
Forum: General
Topic: Transparent proxy in MKT V3.14 "Solved"
Replies: 10
Views: 2765

Transparent proxy in MKT V3.14 "Solved"

Hi

I need a transparent proxy to my lan 192.168.1.x/24 but the next rule not working in mkt V3.14
ip firewall nat> add chain=dstnat protocol=tcp dst-port=80 action=redirect to-ports=8000
In other mikrotik v2.9.51 the last rule work fine, has changed the rule to v3.X?

Thanks

Best regard.
by mushmx
Sat Jan 10, 2009 4:48 am
Forum: Beginner Basics
Topic: Share printer to Hotspot User
Replies: 5
Views: 5280

Share printer to Hotspot User

Hi I have a little trouble with one printer, well the printer are connected via USB to one PC and this PC1 are sharing the printer to hotspot network but the others pc can't print without login before to the hotspot. So, I need that all can print, no matter this or no logged in. I tried with IP Bind...
by mushmx
Sun Aug 31, 2008 8:57 pm
Forum: Beginner Basics
Topic: Point to Multipoint
Replies: 2
Views: 1979

Re: Point to Multipoint

Hi well is possible do that but plz say me. what kind of antenna will you use? kind of traffic "data, video & voip? the traffic that you pass throught the link is constant? I have some links point to multi points with 532 working, but if you can post more information for help you. best rega...
by mushmx
Wed Aug 27, 2008 6:34 am
Forum: General
Topic: bloking video streaming???
Replies: 4
Views: 1871

Re: bloking video streaming???

Thank's for the reply

Yeah is very difficult block all streaming traffic :( anyway I'm blocking some popular sites (youtube, video.google, etc) and :D for now the streaming traffic is less

Best regard
by mushmx
Wed Aug 27, 2008 6:26 am
Forum: General
Topic: Info byte and packet bug in ROS 3.13
Replies: 4
Views: 1472

Re: Info byte and packet bug in ROS 3.13

connection-limit=100,32
means 'redirect requests to proxy only if there are more than 100 requests from that user' =) remove all limits from the rule =)
Thank's for the reply :D
by mushmx
Wed Aug 20, 2008 6:58 pm
Forum: General
Topic: Info byte and packet bug in ROS 3.13
Replies: 4
Views: 1472

Re: Info byte and packet bug in ROS 3.13

post your /ip fi nat export This is my setting NAT /ip firewall nat add action=passthrough chain=unused-hs-chain comment=\ "place hotspot rules here" disabled=yes add action=redirect chain=dstnat comment="PROXY LAN-AKIWIFI" \ connection-limit=100,32 disabled=no dst-limit=1,5,dst...
by mushmx
Wed Aug 20, 2008 5:53 pm
Forum: General
Topic: Info byte and packet bug in ROS 3.13
Replies: 4
Views: 1472

Info byte and packet bug in ROS 3.13

Hi I have install ROS V3.13 and I don't know what happening because in the NAT section I put a rule redirect proxy to port 8080 and the byte and packet info not increment :? the happend same into the filter rules not increment. It is a bug? Or I need change something to view the byte and packet incr...
by mushmx
Sat Aug 16, 2008 5:17 am
Forum: General
Topic: bloking video streaming???
Replies: 4
Views: 1871

bloking video streaming???

Hi

Is possible block all video streaming with only one rule? , because in the present I have some rules (web-proxy) to block specific sites like youtube, video.google. video.aol, etc... But every day I found a new traffic of video streaming :(

Best regard.
by mushmx
Fri Aug 15, 2008 6:20 am
Forum: Wireless Networking
Topic: Next gen wireless card poll
Replies: 57
Views: 29573

Re: Next gen wireless card poll

mmcx :D the best option
by mushmx
Fri Aug 15, 2008 6:07 am
Forum: Beginner Basics
Topic: how to stop any p2p
Replies: 12
Views: 9719

Re: how to stop any p2p

Tengo problem pero es con un trafico muy extraño y segun lo que he leido es p2p y se genera en el puerto 0 he probado con esta regal que colocas aca y no funciona y trato de marcar el oaqueta y no se deja, pongo dropear el puerto 0 y tampoco deja si lo coloco dropea todo el trafico que puedo hacer ...
by mushmx
Fri Aug 15, 2008 6:05 am
Forum: Beginner Basics
Topic: how to stop any p2p
Replies: 12
Views: 9719

Re: how to stop any p2p

Si tengo la version 3.9 en un mikrotik RB133. Probe creando unas dos reglas en Mangle y otras dos en Queues... segun indica un PDF que encontre en el siguiente link. http://www.michigan.com.br/downloads/mikrotik/Limitacao_de_banda_para_P2P-Mikrotik.pdf. Por favor, chequea ese PDF, y si puedes corre...
by mushmx
Wed Aug 13, 2008 6:46 am
Forum: Beginner Basics
Topic: problem with route
Replies: 6
Views: 1727

Re: problem with route

any?
Hi maybe need add a route rule like

Destination: 192.168.1.0/24
Gateway:192.168.2.1

try with this and I hope help you.
by mushmx
Wed Aug 13, 2008 6:23 am
Forum: Beginner Basics
Topic: how to stop any p2p
Replies: 12
Views: 9719

Re: how to stop any p2p

mushmx... veo que eres de Mexico... ya hice lo que dijiste, pero no se bloquea el p2p... puedes ayudarme... por favor...
Claro con gusto te ayudo

¿Has realizado alguna prueba?
¿Que version de RouterOS usas?

saludos.
by mushmx
Fri Aug 08, 2008 6:49 pm
Forum: Wireless Networking
Topic: point - multipoint link WDS trouble
Replies: 6
Views: 2492

Re: point - multipoint link WDS trouble

Thanks for the reply

The solution with splitter is working!!! so now I hope the project is approved.

Best regard
by mushmx
Sun Aug 03, 2008 7:37 am
Forum: Wireless Networking
Topic: point - multipoint link WDS trouble
Replies: 6
Views: 2492

Re: point - multipoint link WDS trouble

Thanks again :D The terrain in cancun over level sea and no exist mountain only jungle and sea but the link not cross the sea. The control center has a tower of 85mts high and the mkt 532 is mounted at 80mts high and the mkt 522 are mounted over light pole about 8 or 11mts high. We used the option s...
by mushmx
Sat Aug 02, 2008 1:14 am
Forum: Wireless Networking
Topic: point - multipoint link WDS trouble
Replies: 6
Views: 2492

Re: point - multipoint link WDS trouble

Thank's for the reply I can't use a dual radio because the budget is limited, but I think divide the link connection of the sector1 with only 3 mkt522 and the sector2 add a splitter 5.8ghz and add a sector3 90° with direction to point A and B. sector1 c)1 mkt 522 (3km distance) and connect to sector...
by mushmx
Fri Aug 01, 2008 1:09 am
Forum: Wireless Networking
Topic: point - multipoint link WDS trouble
Replies: 6
Views: 2492

point - multipoint link WDS trouble

Hi My case is that I have a point to multipoint link with WDS for 6 IP Camara and I have the next equipment: Control Center 1 MKT 532 like AP Bridge with 2 sectors 5.8ghz (sector1 with 90° and 14dbis) and (sector2 with 90° and 14dbis) Remote Point Client "Camara IP Street" a)1 mkt 522 (13k...
by mushmx
Wed Jul 30, 2008 5:42 am
Forum: General
Topic: L2TP Tunnel without IPSec troubles!!!
Replies: 1
Views: 1327

Re: L2TP Tunnel without IPSec troubles!!!

:( no idea?

mmmm is possible that the problem is the adsl modem 2wire?
by mushmx
Mon Jul 28, 2008 7:02 am
Forum: General
Topic: L2TP Tunnel without IPSec troubles!!!
Replies: 1
Views: 1327

L2TP Tunnel without IPSec troubles!!!

Hi I have a PPTP-Server in my office and all work fine :lol: but now I want change to L2TP-Server without IPSec and my clients to L2TP-Client so I do a tested with 2 mikrotik (server and client L2TP) and one modem adsl 2wire. The mikrotik l2tp-server is a DMS-Plus into the modem adsl and I follow th...
by mushmx
Wed Jul 16, 2008 6:14 am
Forum: General
Topic: How to do a routing between pptp client???? (Resolved)
Replies: 14
Views: 6032

Re: How to do a routing between pptp client???? (Resolved)

Hello Solution My Home IP LAN HOME: 192.168.0.X/24 DNS:192.168.0.254 pptp-client ip: 10.210.0.2/24 Route list DA 0.0.0.0/0 <-------------------->192.168.0.254<------>ETHE1 SA 10.210.0.0/24 <-----------> 10.210.0.1<------------>PPTP-OUT DA 10.210.0.1<--------------------------------------------------...
by mushmx
Sat Jul 12, 2008 8:23 am
Forum: General
Topic: VLAN Question
Replies: 3
Views: 1134

Re: VLAN Question

Hello

Check this Link http://www.mikrotik.com/testdocs/ros/2. ... e/vlan.php

Maybe this help you.
by mushmx
Fri Jul 11, 2008 11:35 pm
Forum: General
Topic: How to do a routing between pptp client???? (Resolved)
Replies: 14
Views: 6032

Re: How to do a routing between pptp client???? (Resolved)

Finally I resolved the trouble.

Just had add some routing rules and now it's working!!!


Thanks!!!
by mushmx
Fri Jul 11, 2008 4:27 am
Forum: General
Topic: How to do a routing between pptp client???? (Resolved)
Replies: 14
Views: 6032

Re: How to do a routing between pptp client????

So you want to sit at home and be able to remote desktop/whatever to another user that has established a PPTP VPN session to the network? Thank's hilton I only want connect it via Winbox to the other pptp-clients for monitoring the MKT 511, I enabled the ARP-Proxy in the bridge server but not worki...
by mushmx
Thu Jul 10, 2008 5:27 am
Forum: General
Topic: How to do a routing between pptp client???? (Resolved)
Replies: 14
Views: 6032

Re: How to do a routing between pptp client????

Thanks for the reply Exactly where I need enable the APR-Proxy? In both pptp-client or only in the pptp-server? Because I tried enable the ARP-Proxy only in the server but not worked for me :( and the target of that is can access from my home (ppt-client1) to all pptp-clients using the private ip of...
by mushmx
Wed Jul 09, 2008 7:01 am
Forum: General
Topic: How to do a routing between pptp client???? (Resolved)
Replies: 14
Views: 6032

How to do a routing between pptp client???? (Resolved)

Hi I've a pptp server and 2 pptp client and I want comunicate the both pptp client but I can't. These are the IP pptp server pool pptp : 10.210.0.2-10.210.0.254 local ip: 10.210.0.1 route list: DAC 0.0.0.0/0 x.x.x.x ethe1 DAC 10.210.0.0/24 ethe1 10.210.0.1 DAC 10.210.0.2 <pptp-client2> 10.210.0.1 DA...
by mushmx
Sat Jun 07, 2008 8:56 pm
Forum: Beginner Basics
Topic: Error port 80 in Winbox
Replies: 2
Views: 3237

Re: Error port 80 in Winbox

Thank's for the reply Alway I'm connecting to the lan with IP static and I use the same subnet that the MK 511 IP: 192.168.1.200/24 GW. 192.168.1.254 well I have 3 Mikrotik 511, 2 MK (lobby and suite) are at the same place the third MK 511 (spa) is connected via fibre optic. So the lobby and suite I...
by mushmx
Sat Jun 07, 2008 6:59 am
Forum: General
Topic: blocking some websites how to
Replies: 2
Views: 1140

Re: blocking some websites how to

Use the hotspot with webproxy, first enable the proxy and after in the NAT section put the next rule to redirect all TCP Traffic from port 80 to 8080 "webproxy" / ip firewall nat add chain=dstnat protocol=tcp dst-port=80 action=redirect to-port=8080 Something very import is select the opti...
by mushmx
Sat Jun 07, 2008 6:20 am
Forum: Beginner Basics
Topic: how to stop any p2p
Replies: 12
Views: 9719

Re: how to stop any p2p

Well is very complicate stop all p2p but you can controll the most p2p connection with this rule

open a terminal from the winbox and writedown the next
/ip firewall filter
add chain=forward p2p=all-p2p action=drop
with this rule must block the p2p connection.
by mushmx
Sat Jun 07, 2008 5:48 am
Forum: Beginner Basics
Topic: Error port 80 in Winbox
Replies: 2
Views: 3237

Error port 80 in Winbox

Hi
I have a trouble when I try connecting to MK 511 with winbox appear the next message ERROR WITH PORT 80 and I can't access with the IP of the MK but if I write the MAC ADDRESS, I can access but is very inestable.

So How can fix this trouble?

Thanks
by mushmx
Tue May 06, 2008 6:29 am
Forum: Wireless Networking
Topic: RIC522 max link distance
Replies: 7
Views: 2011

Re: RIC522 max link distance

Yes, I have perfect LOS. Now I want to try this link (15 -17 - 19 km - with R52 and with R52H) Bye - oveda Hi again The 522 is perfect to 15km but more, if you need do a link up 15km you should use a routerboard 532 "wireless card R52H" with antenna heavy duty like 28dbi. Best Regard.
by mushmx
Sat Apr 26, 2008 5:00 am
Forum: Wireless Networking
Topic: Link for 25 Km with maximal performance.
Replies: 2
Views: 1443

Re: Link for 25 Km with maximal performance.

Also I ask to answer, what will be a delay in departure of packages thus 4 hops and this distance... Considering use 4 pcs of RB411A ? Hi Developer why not use a router ric/522? is the best option to that you want to do and this equipment include the router and integral antenna and you can reach 15...
by mushmx
Sat Apr 26, 2008 12:04 am
Forum: Wireless Networking
Topic: RB333 and CCQ problem ptp link 22 km
Replies: 7
Views: 1930

Re: RB333 and CCQ problem ptp link 22 km

I have two RB333 (ROS 3.7) + R52H + antennas grid 28 db on 5 ghz - 22 km link point to point. The alignment antenna is good, LOS is perfect. :D Better TX/RX CCQ is 14/89. (?? :? ??) Signal strenght various between -83 and -89. With Btest (send or receive) I have 6 Mbps on UDP and 3 Mbps on TCP. :( ...
by mushmx
Wed Apr 23, 2008 4:59 pm
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8453

Re: Trouble with link point to point 64km

Hi everybody

Thank's for all reply, I continue with this link :shock: and I read all the post but i have a doubt about what model, kind and mark of antenna i need buy? no matter if is european or american product.


Thanks, best regard. :lol:
by mushmx
Tue Apr 22, 2008 6:04 am
Forum: Beginner Basics
Topic: Winbox setup
Replies: 1
Views: 2459

Re: Winbox setup

Hi, check this site.

http://wiki.mikrotik.com/wiki/Main_Page

I hope this help you.
by mushmx
Tue Apr 22, 2008 5:54 am
Forum: Beginner Basics
Topic: queue tree setup help!
Replies: 2
Views: 1629

Re: queue tree setup help!

I recommend you do some change the diagram like connect the gateway2 to the Ether2 of the MKT and only connect the MKT and the Computers to switch. this help you to get a best controll from the mikrotik because you can redirect the traffic to the correct gateway and do the rules like queues, bandwit...
by mushmx
Tue Apr 22, 2008 5:38 am
Forum: Beginner Basics
Topic: Winbox on Linux?
Replies: 47
Views: 167902

Re: Winbox on Linux?

If you use Debian install with:
# apt-get install wine
In my case I copied the windows fonts to get a nice interfaces.
by mushmx
Mon Feb 18, 2008 6:04 am
Forum: Wireless Networking
Topic: VLANs and Virtual AP's
Replies: 30
Views: 48031

Re: VLANs and Virtual AP's

I have a need for both tagged and untagged virtual AP's. All interfaces need to be bridged out the ether1 port with tags intact. Here is the history of what i have tried. 1. Bridging the vlan interfaces and the nontagged virtual ap interfaces to the ether1 port. Failure: The vlan interfaces failed ...
by mushmx
Sat Feb 09, 2008 5:15 pm
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8453

Re: Trouble with link point to point 64km

How I can increase over the TX POWER?[/color] You are supposed to use default power. You can burn your device and get poor performance if you mess with the power settings. Thanks for the reply. So if I can't increase the TX POWER, I need use other antenna with more DBI? The distance is 64km and I'v...
by mushmx
Sat Feb 09, 2008 7:55 am
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8453

Re: Trouble with link point to point 64km

Finally I did the link point to point, well I used 2 card XtremeRange of 600Mw into my routerboard 532 mikrotik, but something rare happened when I increased the TX POWER of AP BRIDGE, the router began reboot until that I connected via telnet mac to reset it. In the side of STATION WDS I can increas...
by mushmx
Thu Feb 07, 2008 7:17 am
Forum: Beginner Basics
Topic: HotSpot on RouterOS v2.9
Replies: 3
Views: 1767

Re: HotSpot on RouterOS v2.9

Here's my MikroTik setup: [admin@MikroTik] interface> print Flags: X - disabled, D - dynamic, R - running # NAME TYPE RX-RATE TX-RATE MTU 0 R eth ether 0 0 1500 1 wlan wlan 0 0 1500 [admin@MikroTik] ip address> print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFAC...
by mushmx
Mon Jan 21, 2008 12:27 am
Forum: Beginner Basics
Topic: Hotspot Walled garden access msn and winbox
Replies: 3
Views: 4892

Re: Hotspot Walled garden access msn and winbox

i have access to internal resources (printer, mail server, ftp) with walled garden and walled garden ip Probe ports 443 1863 8291 but dont work msn and winbox is not an option enable the transparent proxy in mikrotik hotspot Sorry my English Perdon por mi Ingles Ok, veo que hablas español creo que ...
by mushmx
Mon Jan 21, 2008 12:16 am
Forum: Beginner Basics
Topic: how block connection of p2p?
Replies: 6
Views: 2435

Re: how block connection of p2p?

Do the next....

IP -> FIREWALL

add a new rule with this parameter:

1.- P2P : ALL
2.- PANEL ACTION: DROP

This rule must block all p2p connection
by mushmx
Mon Jan 21, 2008 12:08 am
Forum: Beginner Basics
Topic: pc need to acces other pc
Replies: 4
Views: 1612

Re: pc need to acces other pc

Try with the Bridge Opcion.

Add a bridge and after add the port Ether1 and Ether2.
by mushmx
Sun Dec 23, 2007 6:59 am
Forum: Beginner Basics
Topic: need help as soon as possible plzzzzzzzzzzzzzz
Replies: 3
Views: 1631

Re: need help as soon as possible plzzzzzzzzzzzzzz

what version of RouterOS do u have????
by mushmx
Tue Nov 20, 2007 4:53 am
Forum: Beginner Basics
Topic: can this configuration work?
Replies: 3
Views: 1822

Re: can this configuration work?

600MW are to much, I will recommend you try with 2 antenna RB 522.
by mushmx
Tue Nov 20, 2007 4:47 am
Forum: Beginner Basics
Topic: Solution:Release Cache Memory
Replies: 1
Views: 4772

Re: Solution:Release Cache Memory

well done DjStraw :lol: I hope that experience will encourage you to learn more about MKT
====================
Bien hecho :) ojala eso te anime para aprender más de MKT.
by mushmx
Mon Nov 19, 2007 2:47 am
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8453

Re: Trouble with link point to point 64km

Hello George The link not crooss over the sea or lagoon is just jungle. And sorry for the bad information of the wlan card, actually i'm using the wlan card RB52H (350mW) and is very rare because I have a link point to point with the same feacture over the sea (Playa del carmen to Cozumel Island) an...
by mushmx
Sun Nov 18, 2007 8:53 pm
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8453

Re: Trouble with link point to point 64km

Thank you for your pots. The situation is very rare because we changed all one by one and we tested in every change in both towers and currently are new. The last weekend the weather was raining and fast wind but this week the weather was sunny and not wind. We did the next changes in this order: 1....
by mushmx
Sun Nov 18, 2007 7:13 pm
Forum: Beginner Basics
Topic: Help please
Replies: 3
Views: 1900

Re: Help please

Hi don't worry, this is normal when you Wlan card not found a DHCP, Windows have a system called APIPA (Automatic Private Internet Addressing) and APIPA assigned you only the IP and Mask. Search in WIKIPEDIA ABOUT THIS....... :D ================================================= Share connection Yeah...
by mushmx
Sun Nov 18, 2007 3:11 am
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8453

Trouble with link point to point 64km

Hi, well i had a trouble with my link point to point of 64km, I using 2 Router 532 with Wlan card higher again 2 heavy duty 28dbi 2 Tower of 60mts high. When i do the link TX/RX : 72/77 and TX/RX: 24/36mb for 5 or 10 minute work very well, but the next day my link is very intermittent and the TX/RX ...
by mushmx
Sun Nov 18, 2007 2:50 am
Forum: Beginner Basics
Topic: WinBox issues
Replies: 8
Views: 3346

Re: WinBox issues

well some times this happend when you use the winbox turn off the wlan of ur notebook and connect directly with the RJ45 cable is more stable.
by mushmx
Sat Nov 17, 2007 8:53 pm
Forum: Beginner Basics
Topic: Big newbie over here
Replies: 1
Views: 1517

Re: Big newbie over here

mmmm :? I don't be sure but i suppose you can't login to WinBOX BY default the MKT login is User: Admin And Password: Blanck but firt you need select the router on the Connect To with this you can login. If you continue with this trouble :p reset the router from your MKT directly press the bottom RE...
by mushmx
Sat Nov 17, 2007 8:43 pm
Forum: Beginner Basics
Topic: setting tx power at rb333 w/v3.0rc9 by xr5
Replies: 1
Views: 1763

Re: setting tx power at rb333 w/v3.0rc9 by xr5

Yeah you right, if you see in the TX Power 28 this is the current power but you are force your card, and i recommend you try with DEFAULT and make a test if this work then let it else try increment the TX Power to 20, 24, 26. When you uses the Max power reduce the time life of your card. Best regard
by mushmx
Sat Nov 17, 2007 8:35 pm
Forum: Beginner Basics
Topic: Help please
Replies: 3
Views: 1900

Re: Help please

1.- Connect the cable from you modem to MKT Ether1 2.- Add a DHCP-Client to Ether1 to get a IP from your Modem 3.- Add a Brigde and add the port Ether1 and Wlan, with this both interface are of the same network. 4.- Enable the Wlan interface and configure the SSID, Mode: AP Brigde and the Band = 2.4...
by mushmx
Sat Nov 17, 2007 8:26 pm
Forum: Beginner Basics
Topic: How to block all IP, only 4 of them for Port 80 (http).
Replies: 2
Views: 1509

Re: How to block all IP, only 4 of them for Port 80 (http).

Try this rules. ========================= Traffic: Forward Source: 192.168.13.0/X Destination: 0.0.0.0/0 Protocol: tcp Port: all Action : Drop This block all IP of the range 192.168.13.X/X =============================== Traffic: Forward Source: 192.168.13.3/X (IP Client) Destination: 0.0.0.0/0 Prot...
by mushmx
Sat Nov 17, 2007 4:59 am
Forum: Beginner Basics
Topic: Finally i can use winbox in debian :D
Replies: 1
Views: 4773

Finally i can use winbox in debian :D

I really happy, finally i can use Winbox from Debian Linux with only install the WINE. ----------------------------------------------------------------------------------- Feliz de poder usar Winbox desde Debian :D abajo dejo el link de como hacer eso posible http://www.winehq.org/ http://wiki.mikrot...
by mushmx
Wed Sep 19, 2007 5:34 pm
Forum: Beginner Basics
Topic: WIFI Certified
Replies: 1
Views: 1095

WIFI Certified

Hi I've a doubt, is Mikrotik a WIFI CERTIFIED PRODUCT ? because in the website don't have the logo WIFI Certified.
by mushmx
Tue Sep 11, 2007 7:01 am
Forum: Wireless Networking
Topic: Plz security 128bit wep
Replies: 5
Views: 1357

Re: Plz security 128bit wep

Thank very much for you help!!! :D

Best regard.
by mushmx
Sat Sep 08, 2007 7:26 am
Forum: Wireless Networking
Topic: Plz security 128bit wep
Replies: 5
Views: 1357

Re: Plz security 128bit wep

Thank you... :D for you help...but i've doubt respect about the hexadecimal and decimal password.....In this case i need a hexadecimal password to my AP. I selected a 104 bits WEP but my password must be a hexadecimal password. how to write a hexadecimal password? I'm confused because i view 0X befo...
by mushmx
Thu Sep 06, 2007 9:58 pm
Forum: Wireless Networking
Topic: Plz security 128bit wep
Replies: 5
Views: 1357

Plz security 128bit wep

8) Hi....i need configure the AP with 128 Bit WEP security....but I only view 104bit and 40bit....plz help if someone know....how to do...


Best Regard.......... :)
by mushmx
Sun Aug 05, 2007 9:04 pm
Forum: Beginner Basics
Topic: How to Block MSN Messenger
Replies: 1
Views: 2448

How to Block MSN Messenger

Hi, I'm new in the theme "security network" and i have a troubles to block the MSN especially with the port 80 and 443, when I block the port 80, i can't open any page and with the port 443, I can't start session with some webmail like hotmail, yahoo, gmail. If someone know how to block th...