Hi Folks, I'd like to accomplish what I described on the subject. Get an email from the Mikrotik each time the traffic of 1 interface (or IP) drops or goes below (let's say) 5Mb (but here's the tricky part for me) over a certain period of time , like for instance: 1minute. Using traffic monitor is r...
It was the SNMP the culprit, on an RB1100AHx2
My problem started to happen when I disabled dude, for many problems was causing with the Radius...
Once SNMP was disabled, management went to 0
Right after I re enabled SNMP and management stayed 0
Weĺl see next reboot
April 2014 it's being almost a year since this bug started, or probably earlier than that.
And since version 5.4 at least, and still the bug is present in 6.10 version.
We're having exactly the same issue as efaden described with a RB2011 UAS-2HnD.
ANd we tried on 3 different devices so far with same results
Is this a known hardware issue that we should be aware?
Mikrotik ????
On the web interface of the UM, active users are not being showed, actually the count is 0 (zero), when we know, and we can see 24 active users connected through winbox.
Images attach, this captures where taken at the same moment.
Try WPA2-TKIP instead of WPA2-AES. Also, try WPA instead of WPA2. Some clients are picky, and Mikrotik has a long history of wireless disconnects like this... just search the forum. Thanks jandafields, I tried both ...and same issue, it didn't resolve my problem And considering what you say, is it ...
Hi all, I'm getting this error (unicast key exchange timeout) when i trying to associate a windows (W7) client to my RB133 5.11 with an Atheros AR5212. If I disable the security WPA2 i can connect perfectly fine.. I saw this kind of errors as a common BUG with the version 3.X I was assuming it got s...
Alright ! wasn't very helpful... but thanks anyway. I think everybody checks on the wiki before post a Q here... Here's is the answer if anybody else ran into the same "problem" The wlan1 (receiving) has to be configured as a "pseudobridge station" otherwise it wont work ..then t...
Hi Folks. I'd like to have the following setup: 1 RB with two wireless cards [wlan1 receiving the wireless signal....wlan2 re transmitting the signal to clients] extending the current wireless network. nothing else connected to the RB Ideally ...without wds, (if possible) in router mode to give clie...
Hi all, I just set up an X86 with a RB, installed a demo license, the RouterOS, and I'm only able to see the the Ethernet interface belonging to the PC. none of the 4 of the routerboard :( Question: is this a limitation of the demo license, which will go away when I buy the level 4? Or should I be a...
Thanks pal, my problem seems to be resolved when I just enter the IP address and click on apply, it fills automatically the network and broadcast fields.
Ahmed, I really appreciate your time. I read the topic, but seems to be related with another problem, and couldn't get something out of it....sorry... another ideas about this?, i was reading the forums looking for something similar, but it looks like i'm the only one with this issue? any help pleas...
We have the rules that you mentioned already working from the beginning, but...we still can't connect (+ than 1).
the masquerade is established for any outgoing traffic from WAN in MT1, and more than 1 connection is allowed in MT2 for pptp...
ahmedsaffar thanks for your quick reply! Let's see, you're right, there are two RB153 involved in this. See the picture attach. Only A is allowed to connect from A;B and C. But if some one else want to connect from a different location to MT2, could do it without problems. Question: what should I do...
Thanks ahmedsaffar, But let me give you more details about this we have a MT router supporting the pptp as a server, and we connect to that MT using the PPTP client installed on Win XP, and we don't have any problems if the connection, no matter how many, are from different IPs. let's say i'm in IP ...
Hi everybody! I was trying to connect more than 1 client from the same IP using pptp to a differents MT (all of them 2.9.50) but i failed everytime... I just want to know: 1. is that possible? 2. what should I do , in order to do this? pptp is enabled in ports. the pptp server is working fine with m...