at+reset is is sent if you have chosen specific bands as the module needs to be reset to allo to use only specific LTE band.My SXTR & r11e-LTE6 in 56s uptime do a at+reset by himself, and other person give confirmation that is done by ROS itself.
This is like a "build-in feature".
R11e-4G module supports Band31 and Band43 alreadyLTE band 31
upvote band 43
All depends on the demand and the requirements.Uldis,
What are the other LTE bands are plan? timeframe ? ,
We'd buy some band 40 (2.3Ghz) now....
We will have built-in EPC on the base station but you can also use some external one. Maybe someone here on the forum can suggest some open source or commercial EPC.what epc would have to use to deploy my network?
Please contact firstname.lastname@example.org and we will provide you with a test firmware for the LTE module that should fix this problem.Confirmed. I have been facing the same problem with SXT LTE kit on BAND 3. 6.43.4
What exact features are required for your M2M communication?I am looking for M2M (machine to machine) compatible devices for mikrotiks.
Does the ltap mini LTE or the WAP LTE Kits are compatible?
If not does anyone have some more experience with such a product?
Thank you in advance
What is your AP - also RouterOS or some other equipment?I have hap lite /smips/ with 6.41.2 . With 6.42 in station mode and WEP security /40bit/not work - can not connect. I downgrade to bugfix 6.40.7 and everything is fine - the routrboard is connected !
band=5ghz-a/n channel-width=20/40mhz-Ce un TDMA - 2mIn BAND - N? Channel width? 40Mhz? TDMA = 2ms or AUTO? More info about config please...In the setup we had a R11e-5HnD as AP and Clients was SXTsq Lite5
All the changes are on the AP side so you need to upgrade the AP. Client version can stay the same.Regarding nv2.
Do we update clients and ap or just ap?
We will try to make sure that all our future LTE product will work work with the Passthrough option.Please ensure that Passthrough mode is supported in your future LTE products! Why does this work only with those crappy usb sticks and not with your own LTE hardware?
SXT LTE doesn't have pass-though support.need working passthrough on a SXT LTE (rOS 6.41.2 stable)
More than 100 CAPs.How many CAP interfaces are we talking about?Version 6.42rc5 has been released.
*) capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
Which problem exactly you have?It seems I have similar problems. Did you find a solution?
It is possible to lock to specific tower with specific AT command. You can email to email@example.com and we will provide you with more info on the command.I get an A on all networks.
Is there nothing available to lock it to a specific network or tower? Or set a priority for specific towers?
We tested and it worked - the passthrough client got the 192.168.8.100 IP address.Why it is not possible when using RB951G with Huawei E3372 modem?it is possible do using the passthrough option:
https://wiki.mikrotik.com/wiki/Manual:I ... assthrough
Could you provide more detailed info what exactly is not working?Having the same problem very disappointing I was expecting big things from this product, did you find a solution?
Thank you for the report, just added that:uldis, thank you very much, its working.
But why that option is not documented on the wiki or anywhere else?
Thanks again !
What version you had before on your router where it was working ok?With v6.41rc31 my LTE connection was very slow, max. 7-10mbit/s and high pings >200ms. Also the E3372 LTE modem (still) loses connection when downloading larger amounts of data (via Steam for example) so you have to reboot the RB.
Here is the discussion about that option:Any use cases for this option?
/interface bridge port add bridge=Bridge-vlans interface=ether1 /interface vlan add interface=ether1 name="vlan99-Management" vlan-id=99