MikroTik

logo

Thanks for all of your help

I installed it

thanks again
vincent

logo

any one can help with this

logo

Hi

if used this hope it help

http://www.cyberbajt.com/cyber.php?get= ... 353,90,355

vincent

logo

hi all

if got router that license is as follow

vincent@VERMAAK KOP] system license> print
software-id: "6R34-3TT"
upgradable-to: v3.x
nlevel: 4
features:

Put can not upgrade to soft 3 what am i doing wrong or can this not bee upgraded

thanks vincent

logo

hi ashish

What do you mean

vincent

logo

Hi all The setup that i have is 2 ether ports ver 2.9.46 ether 1 ip 192.168.0.1/25 PC a connected to ether 1 192.168.0.2/24 Ether 2 Ip 192.168.0.129/25 PC b connected to ether 2 192.168.0.130/25 Arp= Proxy-arp ether 1 and 2 Can ping pc a to b and b to a but can not see pc in workgroup any ideas plea...

logo

hi

if got 500 series board

4 x radio card sr2

4 x 18ah alarm battery's
8 x 1.5 amp solar panels

and i get 59h out of it

vincent

logo

hi
did try it but it did not work if i switch off the power of the adslrouter then it works

any but the power will be on the router the hole time it is the asdl line that drops a way

so any other idees

logo

hi

thanks that wil do

i understand thanks for jour help

vincent

logo

hi

just want to know is that opther WDS that is aded on unit A , is that WDS also added to the bridge

vincent

logo

hi ok so both adsl router ar on one network so how do i route the gateways for one wil be 192.168.1.1 router A 192.168.1.2 router be and mikrotik wil be 192.168.1.3 wil the gateway be 192.168.1.3 0.0.0.0/0 gateway 192.168.1.3 if this is write how do i know where what is going on with adsl router tha...

logo

HI Martín. this is the setup at moment Router A ISP> < ADSL ROUTER WITH CONNETION PASWORD ON IT gateway ip 192.168.1.1> < MIKROTIK 0.0.0.0/0 Gateway 192.168.1.1 Router B ISP> < ADSL ROUTER WITH CONNETION PASWORD ON IT gateway ip 192.168.0.1> < MIKROTIK 0.0.0.0/0 Gateway 192.168.0.1 Thees two one mik...

logo

Hi all if got two adsl lines that i am using for supplying internet my qusteion is : the router on line one is set up with my ppoe conection to my isp the second router as wel ( difrent isp ) on the mikrotik pc ther is a manual route pute in to route inter net to route A when i pute in manual router...

logo

Hi Me again k the set up at my cleint home/office is af follow home wlan ip 10.10.10.88 lanip 192.168.100.1 work Wlan ip 10.10.10.87 lan ip 192.168.101.1 iptunnel to high site client router the iptunnel is bridge to lan, the client the dails a ppoe conetion to get internet the info is kept on the he...

logo

hi did the eoip thing with router that i have at home . when i tunnel from one to other. then i can see the other computer on router 1 side and when from router 2 can see computer on router 1 side so it must be double but i can't get it to work from router 1 to router 3 router , router2 is my high s...

logo

hi me again

k at the moment i am runing the system on wds and the clinet connect bothe to the high site.
need to let the client connect to his home computer so if he pres on my home network his works pc wil be sowing PLEASE HELP I AM LOST > And reverse aswell?

Vincent

logo

Hi All
Need help if got a client that has wireless internet at home and work that I supply thru a high site.
Now the client wants me to set it up that if he pres on net work explorer that he will be able to see works computer and the ip address must be the same.
Is this doable

Thanks vincent

logo

hi all

want to finde out if got two client that connect using ppoe conection the connect is to the same board. the two client want to connect to each other pc . if poseble how to do this.

thanks

logo

Hi me again Basic what I want is to know how to setup a 133c router boarded so that the client can connect thru it using the ethe1 but the account holder is on wireless link on other site using the wireless connection of laptop work great cannot get ether1 link with wlan1 that is basically what I wa...

logo

Hi all Need help with following problem my clients connect using pppoe connection from their pc to router that is then connected wireless to my ap-bridge that is a 500rb that’s got nstreme from there to the main machine running mikrotikos, the 500rb is just bridge between nstreme and ap-bridge , so ...

logo

may i have this to
bigbrother@webmail.co.za

logo

whel it is line of sight when i use panoculers you can see the antenas on the hige site i have tride difrent feq as wel runing on 2.4 in south afica

any idee

logo

Hi All This is what at the hige site 16dbi sector http://www.poynting.co.za/productdisplay.php?id=31&cat_id=3 and at the client 23 dbi grid each site have 100mw radio card hige site 500 series and client 333 the clint is 2.4 km from high site signal at hige site -80 and client -82 what i want to...

logo

Try installing it with os CD

had same problem then made os cd and worked

logo

hi

is there a scrip to reset n router to its default software

thanks

vincent

logo

thanks for reply

logo

hi

what is the longest cable run one can do with lmr400?

thanks

logo

hi all

need help have setup my proxy on my pc with ver 2.9.46
the packet are send to the web proxy but if i go to the web page again then it go and fetch it on the net and not from the web proxy

can some one help me

thanks

logo

IS it poseble to give me an idee how to do this

Thanks

logo

That is It

Thanks

will this set up work?
http://www.cyberbajt.com/cyber.php?get= ... 353,90,355

logo

hi all

Want to know if it is possible to route let say port 2000 to this gateway "y" and port 20001 to gateway "z"

without to change the gateway

thanks
vincent

logo

hi all want to know if you can help me i want to make a connection to main site but need to have one set TX sending the info and a norther set RX any one with simulator set up or info how to do this . and one more thing i know this is a thing that every one is struggling with is 2 or more gateways t...

logo

Need help If got client that have microtik board at their premises that connect to a router 500 series on mountain. The client uses pppeo connection to connect but if got router os on a pc at my office where the internet are and this pc with os connect to the net. Now what I want to know is it possi...

Search found 33 matches

Re: DO I NEED TO BY NEW LICENS

Re: pc need to acces other pc

Re: NStreme2 config questions

DO I NEED TO BY NEW LICENS

Re: pc need to acces other pc

pc need to acces other pc

Re: What do you recommend for back up electricity?

Re: 2 adsl lines need to switch

Re: 2 adsl lines need to switch

Re: Cannot get bridge working

Re: 2 adsl lines need to switch

Re: 2 adsl lines need to switch

2 adsl lines need to switch

Re: ip adress on one networke

Re: ip adress on one networke

Re: ip adress on one networke

ip adress on one networke

how to link two ppoe conections

Re: ap-bridge

ap-bridge

Re: CPE-Antenna alignment via customer / Application available?

Re: Signal Strenght

Signal Strenght

Re: install problems with pc

reset router to default

Re: lmr400

lmr400

help with proxy

Re: how to route port

Re: one set of antenas rx other set tx

how to route port

one set of antenas rx other set tx

pppoe conections