Community discussions

## Search found 183 matches

Thu Aug 13, 2020 11:54 am
Forum: Wireless Networking
Topic: CAPsMAN - CAPs are re-connecting in different intervals and timeout during re-connect with CAPsMAN [SOLVED]
Replies: 3
Views: 3105

### Re: CAPsMAN - CAPs are re-connecting in different intervals and timeout during re-connect with CAPsMAN[SOLVED]

Can you elaborate exacly what you did?
on hAP ac2 bridge the setting is the following and the wlan is assigned to that bridge

Thu Aug 13, 2020 12:35 am
Forum: Beginner Basics
Topic: Can hEX S power up hAP ac^2 with POE?
Replies: 10
Views: 1493

### Re: Can hEX S power up hAP ac^2 with POE?

Is there any distance limitation?
Thu Aug 13, 2020 12:26 am
Forum: Beginner Basics
Topic: Can hEX S power up hAP ac^2 with POE?
Replies: 10
Views: 1493

### Re: Can hEX S power up hAP ac^2 with POE?

What if i buy RBGPOE to power up the hap ac2 with his own power supply it wont work?
Wed Aug 12, 2020 11:42 pm
Forum: Beginner Basics
Topic: Can hEX S power up hAP ac^2 with POE?
Replies: 10
Views: 1493

### Re: Can hEX S power up hAP ac^2 with POE?

Which 48v to 24v converter is recommended?

So the flow will be 48v to 24v convertor powering with the converter you mentioned earlier one comes to the hex and second to rbgpoe to power up ac2?
Wed Aug 12, 2020 11:16 pm
Forum: Beginner Basics
Topic: Can hEX S power up hAP ac^2 with POE?
Replies: 10
Views: 1493

### Re: Can hEX S power up hAP ac^2 with POE?

So i need to purchase 48V additional power supply to power up the hEX s and RBGPOE injector + 48v dc to dc converter. How should i connect the RBGPOE with the converter?
Wed Aug 12, 2020 7:16 pm
Forum: Beginner Basics
Topic: Can hEX S power up hAP ac^2 with POE?
Replies: 10
Views: 1493

### Can hEX S power up hAP ac^2 with POE?

following the spec hEX can supply 500ma while ac2 requires 800ma
so it means that it won't work?
Fri Aug 07, 2020 10:53 pm
Forum: Wireless Networking
Topic: Devices not getting full 802.11ac speed on cAP ac
Replies: 19
Views: 3990

### Re: Devices not getting full 802.11ac speed on cAP ac

Who can give some rates configuration example? Here is mine https://uploads.tapatalk-cdn.com/20200807/4efea3b036d92e723a0bff56818e5322.jpg Sent from my SM-A705FN using Tapatalk Hope one of the images will be good enough https://uploads.tapatalk-cdn.com/20200807/b9f0518ed138108953677798739f98ed.jpg
Fri Aug 07, 2020 10:48 pm
Forum: Wireless Networking
Topic: Devices not getting full 802.11ac speed on cAP ac
Replies: 19
Views: 3990

### Re: Devices not getting full 802.11ac speed on cAP ac

Who can give some rates configuration example? Here is mine https://uploads.tapatalk-cdn.com/20200807/4efea3b036d92e723a0bff56818e5322.jpg Sent from my SM-A705FN using Tapatalk Hope one of the images will be good enough https://uploads.tapatalk-cdn.com/20200807/b9f0518ed138108953677798739f98ed.jpg
Fri Aug 07, 2020 5:02 pm
Forum: Wireless Networking
Topic: CAPsMAN Wi-Fi Channel width question
Replies: 15
Views: 2953

### Re: CAPsMAN Wi-Fi Channel width question

Which rates settings are recommended?
Fri Aug 07, 2020 5:01 pm
Forum: Wireless Networking
Topic: Devices not getting full 802.11ac speed on cAP ac
Replies: 19
Views: 3990

### Re: Devices not getting full 802.11ac speed on cAP ac

What would be the rates set recommended for CAPsMAN with ac^2?
Fri Aug 07, 2020 12:45 pm
Forum: Wireless Networking
Topic: Bad performance on hAP ac^2 vs CAPsMAN AP behind hEX s as AP
Replies: 7
Views: 1511

### Re: Bad performance on hAP ac^2 vs CAPsMAN AP behind hEX s as AP

But ac2 is connected via ether1 poe to the capsman (hex s)

Sent from my SM-A705FN using Tapatalk

Thu Aug 06, 2020 12:07 pm
Forum: Wireless Networking
Topic: Bad performance on hAP ac^2 vs CAPsMAN AP behind hEX s as AP
Replies: 7
Views: 1511

### Re: Bad performance on hAP ac^2 vs CAPsMAN AP behind hEX s as AP

Hi i found on https://bgp.guru/2020/01/19/centrally-managed-wifi-with-mikrotik-capsman/ that it claims that It needs to configure adaptive-nosie-immunity could it be the case? /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode set [ find default-name=wlan2...
Thu Aug 06, 2020 7:29 am
Forum: Wireless Networking
Topic: Bad performance on hAP ac^2 vs CAPsMAN AP behind hEX s as AP
Replies: 7
Views: 1511

### Re: Bad performance on hAP ac^2 vs CAPsMAN AP behind hEX s as AP

Its enabled on datapath1

Sent from my SM-A705FN using Tapatalk

Wed Aug 05, 2020 6:52 pm
Forum: Wireless Networking
Topic: Bad performance/lag using CAPsMAN - AP in standalone mode fine
Replies: 12
Views: 2631

### Re: Bad performance/lag using CAPsMAN - AP in standalone mode fine

If your data is on local forwarding then it is going across the bridges on the LAN between the CAP and your main router, so check the bridge config on both, could be related to STP settings, also make sure bridges have an admin-mac set. Well i "played" as well with my caps configuration and i found...
Wed Aug 05, 2020 3:57 pm
Forum: Wireless Networking
Topic: Bad performance on hAP ac^2 vs CAPsMAN AP behind hEX s as AP
Replies: 7
Views: 1511

### Bad performance on hAP ac^2 vs CAPsMAN AP behind hEX s as AP

Hi following another thread that was closed already I am reopening this case because my issue wasn't solved yet. I have hEX s as CAPsMAN and hAP ac^2 as AP I have few lost of connectivity's and losing pings during some time to time - losing pings for 6-7 and once its back I see it reach 2000ms Captu...
Wed Aug 05, 2020 12:26 am
Forum: Wireless Networking
Topic: CAPsMAN Wi-Fi Channel width question
Replies: 15
Views: 2953

### Re: CAPsMAN Wi-Fi Channel width question

Ceee means 5GHz (as 2.4GHz allows Ce at max). Here is (part of) my config: /caps-man channel add band=2ghz-g/n control-channel-width=20mhz extension-channel=disabled frequency=2462 name=f-2462 tx-power=9 add band=5ghz-a/n/ac control-channel-width=20mhz extension-channel=Ceee frequency=5500 name=f-5...
Tue Aug 04, 2020 10:47 pm
Forum: Wireless Networking
Topic: Bad performance/lag using CAPsMAN - AP in standalone mode fine
Replies: 12
Views: 2631

### Re: Bad performance/lag using CAPsMAN - AP in standalone mode fine

Well i "played" as well with my caps configuration and i found that sometime i get some of loss connection even if the laptop stays in the same spot. I lose some pings (5-6) then the ping rasies to 3000ms and ~2000ms and gets back to normal. When having few zoom calls it just freeze. It didnt happen...
Tue Aug 04, 2020 7:27 am
Forum: Wireless Networking
Topic: Mikrotik ROS and support for AC wave2 MU-MIMO﻿?
Replies: 28
Views: 6037

### Re: Mikrotik ROS and support for AC wave2 MU-MIMO﻿?

I'm currently using OpenWRT on my AC2 with ath10k ct smallbuffers driver, much better coverage than ROS (higher TX power I guess) and MU-MIMO is also enabled. The port still needs some additional work till it gets into mainline branch https://github.com/openwrt/openwrt/pull/3037 but it's more promi...
Mon Aug 03, 2020 11:19 pm
Forum: Wireless Networking
Topic: Bad performance/lag using CAPsMAN - AP in standalone mode fine
Replies: 12
Views: 2631

### Re: Bad performance/lag using CAPsMAN - AP in standalone mode fine

So for better performance it should be disabled?
Mon Aug 03, 2020 10:34 pm
Forum: Wireless Networking
Topic: Bad performance/lag using CAPsMAN - AP in standalone mode fine
Replies: 12
Views: 2631

### Re: Bad performance/lag using CAPsMAN - AP in standalone mode fine

ok good to know - you just fixed my slower speeds issues I had thanks erlinden!
what is client to client forwarding?
Mon Aug 03, 2020 7:04 pm
Forum: Wireless Networking
Topic: Bad performance/lag using CAPsMAN - AP in standalone mode fine
Replies: 12
Views: 2631

### Re: Bad performance/lag using CAPsMAN - AP in standalone mode fine

how does enable local forwarding helps?
I am facing quite the same issues over wifi with hEX s (CAPsMAN) + hAP ac^2 (ap)
Sun Aug 02, 2020 11:05 pm
Forum: Wireless Networking
Topic: CAPsMAN Wi-Fi Channel width question
Replies: 15
Views: 2953

### Re: CAPsMAN Wi-Fi Channel width question

tx-power numbers are in dBm, so higher numbers mean higher Tx power. Maximum is either device capability or country-specific limit, whichever lower. And don't forget that to calculate actual Tx power output from wireless chip one has to substract antenna gain from set values (antenna gain for built...
Sat Aug 01, 2020 9:25 pm
Forum: Wireless Networking
Topic: CAPsMAN Wi-Fi Channel width question
Replies: 15
Views: 2953

### Re: CAPsMAN Wi-Fi Channel width question

Tnx for the explanation!
Sat Aug 01, 2020 7:24 pm
Forum: Wireless Networking
Topic: CAPsMAN Wi-Fi Channel width question
Replies: 15
Views: 2953

### Re: CAPsMAN Wi-Fi Channel width question

Ceee means 5GHz (as 2.4GHz allows Ce at max). Here is (part of) my config: /caps-man channel add band=2ghz-g/n control-channel-width=20mhz extension-channel=disabled frequency=2462 name=f-2462 tx-power=9 add band=5ghz-a/n/ac control-channel-width=20mhz extension-channel=Ceee frequency=5500 name=f-5...
Sat Aug 01, 2020 1:39 pm
Forum: Wireless Networking
Topic: CAPsMAN Wi-Fi Channel width question
Replies: 15
Views: 2953

### Re: CAPsMAN Wi-Fi Channel width question

how do you make it? can you share an example? i am facing some raspberry pi3 that can't connect to the wifi since the change of the width to 20mhz with Ceee how do i allow 2.4? found it /caps-man configuration add channel=channel24 datapath=datapath1 installation=indoor mode=ap name=cfg24 security=...
Sat Aug 01, 2020 11:01 am
Forum: Wireless Networking
Topic: CAPsMAN Wi-Fi Channel width question
Replies: 15
Views: 2953

### Re: CAPsMAN Wi-Fi Channel width question

how do you make it? can you share an example?
i am facing some raspberry pi3 that can't connect to the wifi since the change of the width to 20mhz with Ceee
how do i allow 2.4?
Fri Jul 31, 2020 5:41 pm
Forum: Wireless Networking
Topic: CAPsMAN Wi-Fi Channel width question
Replies: 15
Views: 2953

### Re: CAPsMAN Wi-Fi Channel width question

Can i do the 2.4 and 5 on the same cfg?
Fri Jul 31, 2020 7:26 am
Forum: Wireless Networking
Topic: CAPsMAN Wi-Fi Channel width question
Replies: 15
Views: 2953

### CAPsMAN Wi-Fi Channel width question

Hello
Does the hAP ac^2 could support 160Mhz or just up to 80Mhz?
WISP AP.PNG
How can I configure the following on the caps channel setting?
caps2.PNG
also if on my Capsman setting I dont have defined any channels how does it pick it?
hapac2interfaces.PNG

thank you
Thu Jul 30, 2020 11:30 pm
Forum: Wireless Networking
Topic: Create Mesh in CapsMan
Replies: 2
Views: 728

### Re: Create Mesh in CapsMan

Thu Jul 30, 2020 11:25 pm
Forum: Wireless Networking
Topic: Capsman on hEX S with hAP ac^2  [SOLVED]
Replies: 6
Views: 1372

### Re: Capsman on hEX S with hAP ac^2[SOLVED]

Tnx i did it.
Thu Jul 30, 2020 10:14 pm
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

Yes indeed, that's how i do it now
Thu Jul 30, 2020 8:25 pm
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

Tnx again!
I would also like to know since wisp ap has a more features way to use the ap as an ap and also as a router is it possible to connect the hAP ac^2 with usb lte and use it as another wan access?
Thu Jul 30, 2020 6:30 pm
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

For now capsman is stable since the bridge fix.

Tnx all
Also who can explain what is the differenxe between bridge and router mode on wisp ap?
Thu Jul 30, 2020 4:30 pm
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

I understand, so it just meters if i want to manage the wifi via caps or via dedicated device. I am looking what will be the best way to configure the wirless setings (like to avoid using b mode and to increase the 5ghz power) how do i do so in CapsMan
Thu Jul 30, 2020 3:11 pm
Forum: Beginner Basics
Topic: HEX s as DNS [SOLVED]
Replies: 7
Views: 1363

### Re: HEX s as DNS[SOLVED]

totally, thats what I did...
Thu Jul 30, 2020 2:58 pm
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

Basically it didnt fix the way to change on wisp ap to bridge (it was just changed to cap) which i am not sure that i know what is the difference. Is there any guideness to find out more about WISP ap mode? I assume that to set cap for one device currently is less inportant now, when i will add mor...
Thu Jul 30, 2020 2:57 pm
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

Stop using quickset and start configuring the devices by hand.
Especially if you want to "study" something.
Ok so how do i switch between the modes?
Thu Jul 30, 2020 2:23 pm
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

You don't need "wisp ap mode" you need "cap mode". If you want to find differences: reset to no config, try first, export, reset to no config, try second, export - you will have two configs that you can study in any text redactor. Most likely loops are the result of adding cap interfaces to bridges...
Thu Jul 30, 2020 1:37 pm
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

Basically it didnt fix the way to change on wisp ap to bridge (it was just changed to cap) which i am not sure that i know what is the difference. Is there any guideness to find out more about WISP ap mode? I assume that to set cap for one device currently is less inportant now, when i will add more...
Thu Jul 30, 2020 1:04 am
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

I don't know if it has anything to do with these bridges, but FYI: quickset can be used only for initial setup . After you used it once or configured router manually you can never touch it again. I mean literally NEVER . And a piece of advice: better don't use it at all. ok now i understood what it...
Thu Jul 30, 2020 12:40 am
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

the dhcp works on the bridge, when I use the webfig to change it to be using bridge on WISP AP it changes automatically to router and adds the ip of ether1
Thu Jul 30, 2020 12:36 am
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

Why so many bridges? Why this: /ip dhcp-client add disabled=no interface=bridge coexist with this: /ip address add address=192.168.88.224/24 interface=ether1 network=192.168.88.0 and this: /interface bridge filter add action=drop chain=input dst-port=68 in-interface=ether1 ip-protocol=udp \ mac-pro...
Thu Jul 30, 2020 12:21 am
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

Thu Jul 30, 2020 12:15 am
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### Re: hAP ac2 as WISP AP cannot change to bridge

@Shy, read answers to your other topics. The information can be found easily (in the optional configuration step): https://forum.mikrotik.com/viewtopic.php?f=13&t=163767&p=808123#p808144 thank you found what was missing on my bridge on hap ac2 On bridge, change to protocol-mode=none. The default is...
Wed Jul 29, 2020 11:19 pm
Forum: Beginner Basics
Topic: hAP ac2 as WISP AP cannot change to bridge
Replies: 26
Views: 3817

### hAP ac2 as WISP AP cannot change to bridge

Hello i have hEX s with bridge on all ports 2-5 having on the ether5 connected hAP ac2 with bridge as well on all ports (poe in on ether1) i tried to setup a dhcp on the bridge1 interface but it doesn't get an IP on the interface. i could access hAP ac2 with webfix only once I have ip on ether1 what...
Wed Jul 29, 2020 10:14 pm
Forum: Beginner Basics
Topic: HEX s as DNS [SOLVED]
Replies: 7
Views: 1363

### Re: HEX s as DNS[SOLVED]

See attached # jul/29/2020 22:16:14 by RouterOS 6.47 /ip firewall filter add action=accept chain=input comment="Allow LAN DNS queries-UDP" dst-port=53 \ in-interface-list=LAN protocol=udp add action=accept chain=input comment="Allow LAN DNS queries - TCP" dst-port=\ 53 in-interface-list=LAN protocol...
Wed Jul 29, 2020 10:09 pm
Forum: Beginner Basics
Topic: HEX s as DNS [SOLVED]
Replies: 7
Views: 1363

### Re: HEX s as DNS[SOLVED]

I have checked the dns queries from wan which isnt working so probably it looks ok.
Wed Jul 29, 2020 9:26 pm
Forum: Beginner Basics
Topic: HEX s as DNS [SOLVED]
Replies: 7
Views: 1363

### Re: HEX s as DNS[SOLVED]

I also needed to allow DNS in firewall [admin@MikroTik] /ip firewall filter> add action=accept chain=input comment="Allow LAN DNS queries-UDP" dst-port=53 \ \... in-interface-list=LAN protocol=udp [admin@MikroTik] /ip firewall filter> add action=accept chain=input comment="Allow LAN DNS queries - TC...
Wed Jul 29, 2020 7:02 pm
Forum: Beginner Basics
Topic: HEX s as DNS [SOLVED]
Replies: 7
Views: 1363

### Re: HEX s as DNS[SOLVED]

found the solution I think:)
In Winbox under IP -> DNS ensure that Allow Remote Request Box is checked, that should be the first step. Then under IP -> DHCP Server -> Networks and the configurations that the DNS server is set to the IP of the router board, also specify a Domain suffix (eg Home.local).
Wed Jul 29, 2020 6:52 pm
Forum: Beginner Basics
Topic: HEX s as DNS [SOLVED]
Replies: 7
Views: 1363

### HEX s as DNS[SOLVED]

Hey
I am facing some issues to use the hexs as dns. Suddenly it stopped to work... what can be the issue?
Tue Jul 28, 2020 10:24 am
Forum: Beginner Basics
Topic: LTE backup plan [SOLVED]
Replies: 15
Views: 2427

### Re: LTE backup plan[SOLVED]

That's a great feature needed. I don't monitor that and i would love to.

Sent from my SM-A705FN using Tapatalk

Tue Jul 28, 2020 10:08 am
Forum: Wireless Networking
Topic: Capsman on hEX S with hAP ac^2  [SOLVED]
Replies: 6
Views: 1372

### Re: Capsman on hEX S with hAP ac^2[SOLVED]

I thought to use the hEX s as the capsman manager and if i would add more cAP ac or 2nd hAP ac^2 it will fit it.
doesn't it make any sense?
Mon Jul 27, 2020 9:41 pm
Forum: Beginner Basics
Topic: hAP ac2 and hEX S configuration/setup problems
Replies: 9
Views: 1560

### Re: hAP ac2 and hEX S configuration/setup problems

Hi I think tou might have some overlapping configuration. If the hAP ac^2 is connected to the ether1 with PoE init means that it has to be inside a bridge. If both network devices that had 192.168.88.0/0 and the second has the same IPs it will break the connection. Please give a better diagram with ...
Mon Jul 27, 2020 9:34 pm
Forum: Wireless Networking
Topic: Capsman on hEX S with hAP ac^2  [SOLVED]
Replies: 6
Views: 1372

### Capsman on hEX S with hAP ac^2 [SOLVED]

Hi Should i prepare the hAP ac2 to be controlled by CapsMan on hEX s ? I am ordering cAP ac. I reviewed several youtubes that claims that capsman configuration takes 5 min. I am missing some parts of the setup. Do i config the cap interface on the capsman or on the cap device? Can capsman could be w...
Mon Jul 27, 2020 12:17 pm
Forum: Beginner Basics
Topic: MikroTik Mobile app “Connection Refused”
Replies: 3
Views: 523

### Re: MikroTik Mobile app “Connection Refused”

Hi
I am facing the same issues
When reaching via mac sometimes it doesnt work as expected with the tik app. I couldnt find the root cause.the winbox is opened without specified IPs.
Fri Jul 24, 2020 2:56 pm
Forum: Wireless Networking
Topic: How to get more than 54Mbps speed with 2.4Ghz band in hAP Ac? [SOLVED]
Replies: 7
Views: 1135

### Re: How to get more than 54Mbps speed with 2.4Ghz band in hAP Ac?[SOLVED]

20/40MHz eC ?

Thank you for the recommendations

Sent from my SM-A705FN using Tapatalk

Wed Jul 22, 2020 10:10 pm
Forum: Beginner Basics
Topic: hAP ac^2 behind hEX s router [SOLVED]
Replies: 13
Views: 2452

### Re: hAP ac^2 behind hEX s router[SOLVED]

Only use CAPsMAN if you have like 3 or more accesspoints. Regarding the config: Reset the device without default configuration and start from there. If you want an accesspoint: Required create a bridge add all interfaces (LAN and WLAN) to the bridge (here your device will be unavailable for a short...
Wed Jul 22, 2020 10:03 pm
Forum: Beginner Basics
Topic: hAP ac^2 behind hEX s router [SOLVED]
Replies: 13
Views: 2452

### Re: hAP ac^2 behind hEX s router[SOLVED]

Wed Jul 22, 2020 8:39 pm
Forum: Beginner Basics
Topic: hAP ac^2 behind hEX s router [SOLVED]
Replies: 13
Views: 2452

### Re: hAP ac^2 behind hEX s router[SOLVED]

i have enabled winbox and http accesss to the lan network and then it started to work.. pretty weird... before there was nothing written and I could reach from TikApp using MAC address and IP only from that mobile.
Wed Jul 22, 2020 8:03 pm
Forum: Beginner Basics
Topic: hAP ac^2 behind hEX s router [SOLVED]
Replies: 13
Views: 2452

### Re: hAP ac^2 behind hEX s router[SOLVED]

You need to follow the steps mentioned here: viewtopic.php?f=13&t=164020#p807279
Thats what i did
Can i export the config?

Sent from my SM-A705FN using Tapatalk

Wed Jul 22, 2020 7:49 pm
Forum: Beginner Basics
Topic: hAP ac^2 behind hEX s router [SOLVED]
Replies: 13
Views: 2452

### Re: hAP ac^2 behind hEX s router[SOLVED]

Right...
How do i allow access? Its ether1 connected as the uplink. Probably because its assigned as wan?
How do i configure bridge properly?
Wed Jul 22, 2020 6:34 pm
Forum: Beginner Basics
Topic: hAP ac^2 behind hEX s router [SOLVED]
Replies: 13
Views: 2452

### Re: hAP ac^2 behind hEX s router[SOLVED]

Thats what i did... but this bridge ip is available only from my mobile . I can't understand why

Sent from my SM-A705FN using Tapatalk

Wed Jul 22, 2020 5:55 pm
Forum: Beginner Basics
Topic: hAP ac^2 behind hEX s router [SOLVED]
Replies: 13
Views: 2452

### Re: hAP ac^2 behind hEX s router[SOLVED]

I do want the hap ac2 to be available on webconfig within the lan.
Also i wanted to have cspsman to manage the wifi but then i realized that it has to be cap only.

Sent from my SM-A705FN using Tapatalk

Wed Jul 22, 2020 4:47 pm
Forum: Beginner Basics
Topic: hAP ac^2 behind hEX s router [SOLVED]
Replies: 13
Views: 2452

### hAP ac^2 behind hEX s router[SOLVED]

hello i am just completing the setup of using hAP ac^2 as an AP for now its configured as Home AP dual and I have configured all ports to be as a bridge, configrued an ip for the Bridge. hAP ac^2 is connected on the ether1 with PoE port on port 5 on hEX s first I would like to know how that is the h...
Tue Jul 21, 2020 11:54 am
Forum: Beginner Basics
Topic: hAP ac^2 as AP [SOLVED]
Replies: 8
Views: 1406

### Re: hAP ac^2 as AP[SOLVED]

Don't use the app, use Winbox for configuration. Reset the device without default configuration and start from there. If you want an accesspoint: Required create a bridge add all interfaces (LAN and WLAN) to the bridge (here your device will be unavailable for a short period) configure WLAN setting...
Mon Jul 20, 2020 11:39 pm
Forum: Beginner Basics
Topic: hAP ac^2 as AP [SOLVED]
Replies: 8
Views: 1406

### Re: hAP ac^2 as AP[SOLVED]

Also found that ineeded to change to wisp mode.
What is the y to do so on the app and not via webfig?

Who can explain and give some details about what will be the best conf for wifi and how to configure with capsman ( to be preapared for additional cAP)
Mon Jul 20, 2020 10:24 pm
Forum: Beginner Basics
Topic: hAP ac^2 as AP [SOLVED]
Replies: 8
Views: 1406

### Re: hAP ac^2 as AP[SOLVED]

Finally i could make it work wheb webconfig was accessible on the bridge ip.
What would be the best wifi configuration for my position i tried to play with the configuration but its not sos table.
Mon Jul 20, 2020 10:00 pm
Forum: Beginner Basics
Topic: hAP ac^2 as AP [SOLVED]
Replies: 8
Views: 1406

### Re: hAP ac^2 as AP[SOLVED]

Thanks !
How can i reset the caps man?
Mon Jul 20, 2020 9:59 pm
Forum: Beginner Basics
Topic: hAP ac^2 as AP [SOLVED]
Replies: 8
Views: 1406

### Re: hAP ac^2 as AP[SOLVED]

Thanks !
How can i reset the caps man?
Mon Jul 20, 2020 8:46 pm
Forum: Beginner Basics
Topic: hAP ac^2 as AP [SOLVED]
Replies: 8
Views: 1406

### hAP ac^2 as AP[SOLVED]

Hi Please help me understand what i am doing wrong... Having hEX S as my router i wanted to connect hAP ac^2 as Access point manages by CapsMan For the first step i just wanted to power up the ac^2 with the PoE. When i am connected to the hAP ac^2 i don't have internet. Used the TikApp to configure ...
Thu Jul 16, 2020 9:32 am
Forum: General
Topic: [SOLVED] HAIRPIN NAT not working
Replies: 27
Views: 23685

### Re: [SOLVED] HAIRPIN NAT not working

FWIW, I had been wrestling with this issue for years and finally got it thanks to this thread. For completeness, here is an actual working hairpin nat with port forwarding configuration: The first src-nat is the local-to-internet masquerade. Second src-nat is local-to-local masquerade. The dst-nat ...
Thu Jul 16, 2020 9:30 am
Forum: Beginner Basics
Topic: Hairpin NAT [SOLVED]
Replies: 8
Views: 1532

### Re: Hairpin NAT[SOLVED]

Found the solution - thanks to @jhgorse
viewtopic.php?t=107851#p547024
thank you
Mon Jul 13, 2020 6:22 pm
Forum: Beginner Basics
Topic: winbox / webfig access broken [SOLVED]
Replies: 3
Views: 834

### Re: winbox / webfig access broken[SOLVED]

You should open port 8291
I would recommend open it with Port knock

Sent from my SM-A705FN using Tapatalk

Sun Jul 12, 2020 8:38 pm
Forum: Beginner Basics
Topic: Hairpin NAT [SOLVED]
Replies: 8
Views: 1532

### Re: Hairpin NAT[SOLVED]

Who can help?
Sun Jul 12, 2020 6:10 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

I already have "Sticky ISP" Mangle rules so the server is accessible outside through the right WAN
but I wonder if its better to let the "whole" route from that machine through the 2nd ISP link
Sun Jul 12, 2020 6:08 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

if course if the LTE would be able to act as a "modem" only it would be preffered but I assume its possibly only on E3372 and not E8732
Sun Jul 12, 2020 5:39 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

It has traffic monitor rule to move to lte once fiber is loaded (if...)

e.g.
who can help me to understand how mangle ports are doing a port forward from external ips when firewall rules do not "block" them by default?
Sun Jul 12, 2020 5:04 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

external wan IP?
its not defined no where
the dongle is on 192.168.8.x

Updated: I configured dst address as none and incoming interface as lte1 and it worked!
now I just need to make sure that this host is routing through the lte1 as default...
Sun Jul 12, 2020 4:56 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

Its opened as dmz already so it sbould be ok from the dongle side.
What i dont understand how that mikrotik will know fixedwanip belongs to lte interface
Sun Jul 12, 2020 4:41 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

+---------------------------------------+ | +-----> Fiber (CAT6) ether1 (external IP ISP) | Mikrotik hEX s | | | | +-----> USB dongle E8732 (GW 192.168.8.1) | | 192.168.8.100 +--------------------+------------------+ | 192.168.88.1 | | | | | +--------------->+-------------------------------+ | | | ...
Sun Jul 12, 2020 4:19 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

You are contradicting yourself........ " I do have Huwaei E8732 that is doing NAT ," " I am not behind NAT, that's why I mentioned fix ip " In any case, if the modem is getting a public IP and you have the MT setup on the MODEM as forwarding everything (all ports) to the MT, then treat the MT fixed...
Sun Jul 12, 2020 4:18 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

Do you have a public IP at the LTE modem.

In the US... You don't unless you paid extra for a static IP.
I pay more for that
Sun Jul 12, 2020 4:15 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

Let me explain it please, The LTE external IP has fix public ip. The Dongle itself is doing NAT on 192.168.8.0/24 and the Mikrotik gets 192.168.8.100 , on the dongle device 192.168.8.100 is configured as DMZ. I want the external IP of the LTE to do port forward from Ext ip x.x.x.x 》》 192.168.8.100 [...
Sun Jul 12, 2020 3:08 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Re: Port forward on LTE

I am not behind NAT, that's why I mentioned fix ip
since the lte interface doesn't familier with its external IP how do I make the right rule for that?
Sun Jul 12, 2020 12:40 pm
Forum: Beginner Basics
Topic: Port forward on LTE
Replies: 21
Views: 3801

### Port forward on LTE

hi
I do have Huwaei E8732 that is doing NAT, I've configured the Mikrotik as DMZ on it and it should be published with its external IP (fix ip).
how do I config the port forward for the LTE interface with the external IP on the Mikrotik side ?

Sat Jul 11, 2020 9:06 am
Forum: Beginner Basics
Topic: CRS312 Slow LAN Transfer Speed
Replies: 3
Views: 679

### Re: CRS312 Slow LAN Transfer Speed

Could you export the config hide sensitive data?

Sent from my SM-A705FN using Tapatalk

Fri Jul 10, 2020 11:14 am
Forum: Beginner Basics
Topic: Dual WAN with LTE
Replies: 5
Views: 832

### Re: Dual WAN with LTE

I will take a look
Thanks
Fri Jul 10, 2020 8:56 am
Forum: Beginner Basics
Topic: Dual WAN with LTE
Replies: 5
Views: 832

### Re: Dual WAN with LTE

Ok o have tried what tomas suggested i could see in logs that the traffic minitor chabges to isp2 but the traffic isnt going there. How can i run a debug for mangle rules?
Thu Jul 09, 2020 11:30 am
Forum: Beginner Basics
Topic: Dual WAN with LTE
Replies: 5
Views: 832

### Re: Dual WAN with LTE

I really recommended to learn and do this one HowTo who have got the best way to use many WAN's at ones. Next you can use any method netwatch/script/pcc etc to just flow the outgoing - then this is small stuff. Bandwidth-based load-balancing with failover. This presentation also covers Mangle. This...
Wed Jul 08, 2020 3:10 pm
Forum: Beginner Basics
Topic: Hairpin NAT [SOLVED]
Replies: 8
Views: 1532

### Re: Hairpin NAT[SOLVED]

Not even close.
Unless you know what you are actually putting down in the config, probably best to read and learn more prior to doing so.
Yes I did, what is wrong in what I wrote?
Wed Jul 08, 2020 3:08 pm
Forum: Beginner Basics
Topic: Hairpin NAT [SOLVED]
Replies: 8
Views: 1532

### Re: Hairpin NAT[SOLVED]

If you have 2 servers which both serve web services on the same port then there is no way for router to decide what server send incoming connection traffic to. Harpin just lets to access local resource via external IP from LAN but the problem is the same: which server should receive packets send to...
Wed Jul 08, 2020 3:03 pm
Forum: Beginner Basics
Topic: Dual WAN with LTE
Replies: 5
Views: 832

### Dual WAN with LTE

Hi I have configured LTE with distance 1 as my primary ether1 wan access. both are currently working and once the ether1 is down its running to LTE. I wanted to have a specific route throught the LTE (and also have port forward from LTE to one of the clients) when I tried to configure specific route...
Wed Jul 08, 2020 11:41 am
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

You are basically right, the reason to have hEX s is because i dont have too much space so i do have hEX S for the sfp part and poe out i will add hAP ac^2 to the setup.
Probably another ac^2 in the future for switch capabilities.

Sent from my SM-A705FN using Tapatalk

Tue Jul 07, 2020 11:24 pm
Forum: Beginner Basics
Topic: Hairpin NAT [SOLVED]
Replies: 8
Views: 1532

### Re: Hairpin NAT[SOLVED]

Tue Jul 07, 2020 11:21 pm
Forum: Beginner Basics
Replies: 6
Views: 1166

port knock is the thing, works flawlessly

How do i allow access to the box from lan without needs to port knock?
tnx
Tue Jul 07, 2020 5:59 pm
Forum: Beginner Basics
Topic: LTE backup plan [SOLVED]
Replies: 15
Views: 2427

### Re: LTE backup plan[SOLVED]

Yes thats the reason i did a mistake by configured the route.

Sent from my SM-A705FN using Tapatalk

Tue Jul 07, 2020 4:22 pm
Forum: Beginner Basics
Replies: 6
Views: 1166

found the info for port knocking > https://wiki.mikrotik.com/wiki/Port_Knocking

And how do i make the ipsec setup?
Tue Jul 07, 2020 3:24 pm
Forum: Beginner Basics
Topic: Hairpin NAT [SOLVED]
Replies: 8
Views: 1532

### Hairpin NAT[SOLVED]

hello I do have 2 web services that I would like to be avaialble locally with the external IP i read that its possible by running the following procedure https://wiki.mikrotik.com/wiki/Hairpin_NAT I do have dynamic IP on the WAN interface, what should be the right firewall nat rules that I should as...
Tue Jul 07, 2020 3:20 pm
Forum: Beginner Basics
Replies: 6
Views: 1166

Hello guys
I know that most of you are not a fan of opening access to the MT devices over WAN, I use the Mikrotik app very often on Wifi and I would like to have the ability to do so remotely as well

How can I open access from WAN for several IPs?
Tue Jul 07, 2020 11:50 am
Forum: Beginner Basics
Topic: LTE backup plan [SOLVED]
Replies: 15
Views: 2427

### Re: LTE backup plan[SOLVED]

I managed to solve it
there was a bad route configured.
now all works!
for those who intrested see the how to

https://blog.ligos.net/2018-03-01/Mikro ... lover.html

e.g. I did a mass cleanup of the uncesessary NAT rules that I had in the lab.
so thanks @anav for the followup
Tue Jul 07, 2020 1:06 am
Forum: Beginner Basics
Topic: LTE backup plan [SOLVED]
Replies: 15
Views: 2427

### Re: LTE backup plan[SOLVED]

Hi The ip mentioned was just a test to see if i could reach over 4G using TikApp. Its not a static rule. The APN itself is PUB and is written in the WAN interfaces. The Nat rules you see were tested with some hairpin nat rules for some testing purposes. This device is holding some lab environment so...
Mon Jul 06, 2020 8:33 pm
Forum: Beginner Basics
Topic: LTE backup plan [SOLVED]
Replies: 15
Views: 2427

### Re: LTE backup plan[SOLVED]

.
Mon Jul 06, 2020 7:13 pm
Forum: Beginner Basics
Topic: LTE backup plan [SOLVED]
Replies: 15
Views: 2427

### Re: LTE backup plan[SOLVED]

How do i export?
Mon Jul 06, 2020 4:32 pm
Forum: Beginner Basics
Topic: LTE backup plan [SOLVED]
Replies: 15
Views: 2427

### Re: LTE backup plan[SOLVED]

I found this but I couldn't make it work https://blog.ligos.net/2018-03-01/Mikrotik-And-LTE-via-USB-and-Failover.html configured route to the lte1 gateway with distance of 2 (Changed for the test to be 1) but it didn't work on NAT table I could see a rule that reflects to WAN access but I couldn't a...
Sun Jul 05, 2020 1:31 pm
Forum: Beginner Basics
Topic: LTE backup plan [SOLVED]
Replies: 15
Views: 2427

### LTE backup plan[SOLVED]

Hi I have hEX S with fibre connection, I would like to add LTE backup for the connectivity. connected HUWAEI USB dongle which I could see that the GW was added automatically once plugged in- I changed the APN and the check gateway to ping, I changed the metric to 2 and unplugged the Fibre connectivi...
Thu Jul 02, 2020 11:39 pm
Forum: Beginner Basics
Topic: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance? [SOLVED]
Replies: 13
Views: 1855

### Re: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance?[SOLVED]

Did factory reset
Reconfigured my relevant rules

Everything is perfect.
Thu Jul 02, 2020 11:16 pm
Forum: Beginner Basics
Topic: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance? [SOLVED]
Replies: 13
Views: 1855

### Re: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance?[SOLVED]

well, I didnt config it manually
i believe it was there from the begining...
what do you recommend?
Thu Jul 02, 2020 11:08 pm
Forum: Beginner Basics
Topic: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance? [SOLVED]
Replies: 13
Views: 1855

### Re: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance?[SOLVED]

What do you mean enabled fastrack?
I thought it was enabled as part of the default forward filter rules?
Correct, It was.
Thu Jul 02, 2020 11:07 pm
Forum: Beginner Basics
Topic: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance? [SOLVED]
Replies: 13
Views: 1855

### Re: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance?[SOLVED]

Two things (1) Disable this rule as its functionality from what I have read as yet to be fully explored and may cause issues...... /interface detect-internet set detect-interface-list=all (2) The most discernible issue is that you are using the bridge but your IP address refers to ether2 so you nee...
Thu Jul 02, 2020 10:58 pm
Forum: General
Topic: Bandwidth test program on MacBook
Replies: 5
Views: 3799

### Re: Bandwidth test program on MacBook

is it possible to get the link?
its down
Thu Jul 02, 2020 10:56 pm
Forum: Beginner Basics
Topic: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance? [SOLVED]
Replies: 13
Views: 1855

### Re: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance?[SOLVED]

currently on 6.46.3
notticed that there is an upgrade to 6.47
should I run that?

also tried to enable fast track
Thu Jul 02, 2020 10:15 pm
Forum: Beginner Basics
Topic: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance? [SOLVED]
Replies: 13
Views: 1855

### Re: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance?[SOLVED]

Thu Jul 02, 2020 9:49 pm
Forum: Beginner Basics
Topic: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance? [SOLVED]
Replies: 13
Views: 1855

### Re: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance?[SOLVED]

Throughput is 200mbit down 200 mbit up
Connected directly with cat6 to the hex s on port 1.

I am connected on p2p fiber so i get CAT6 to my apartment.
Thu Jul 02, 2020 9:22 pm
Forum: Beginner Basics
Topic: Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance? [SOLVED]
Replies: 13
Views: 1855

### Got my 1st Mikrotik device = hEX s 》》 How do I improve it's performance?[SOLVED]

Hello
Finally i got my hEX s device, just connected i could see that speed performance is less good than my ISP router (200mbit dropped to 170mb max)
What would be the best practice configuration for better performance?

10q in asvance
Wed Jul 01, 2020 10:27 pm
Forum: RouterBOARD hardware
Topic: HAP AC2 best option for home use
Replies: 8
Views: 1576

### Re: HAP AC2 best option for home use

I had the same concern, I have a fiber 200mbit symetric, waiting for the hAP ac^2 to arrive, I will keep you updated one i will recieve it and make some tests.
Mon Jun 29, 2020 8:33 pm
Forum: Announcements
Topic: MUM EUROPE AND OTHER UPCOMING EVENTS - POSTPONED!
Replies: 43
Views: 73081

### Re: MUM EUROPE AND OTHER UPCOMING EVENTS - POSTPONED!

What will be the next products of hap ac^2 ??
Sat Jun 27, 2020 1:57 pm
Forum: General
Topic: hAP ac^2 Ram 128/256MB??
Replies: 16
Views: 3005

### Re: hAP ac^2 Ram 128/256MB??

Tnx again xvo for the info
Sat Jun 27, 2020 10:56 am
Forum: General
Topic: hAP ac^2 Ram 128/256MB??
Replies: 16
Views: 3005

### Re: hAP ac^2 Ram 128/256MB??

So it was temporary and that's it?? Why?
What does it mean?
Sat Jun 27, 2020 6:42 am
Forum: General
Topic: hAP ac^2 Ram 128/256MB??
Replies: 16
Views: 3005

### Re: hAP ac^2 Ram 128/256MB??

And how can i order from that batch ?
Sat Jun 27, 2020 5:31 am
Forum: General
Topic: hAP ac^2 Ram 128/256MB??
Replies: 16
Views: 3005

### Re: hAP ac^2 Ram 128/256MB??

Sat Jun 27, 2020 5:06 am
Forum: General
Topic: hAP ac^2 Ram 128/256MB??
Replies: 16
Views: 3005

### Re: hAP ac^2 Ram 128/256MB??

From the product page:
Size of RAM 128 MB
Storage size 16 MB

So not sure where you are getting other information??
viewtopic.php?t=132051
Sat Jun 27, 2020 3:28 am
Forum: General
Topic: hAP ac^2 Ram 128/256MB??
Replies: 16
Views: 3005

### hAP ac^2 Ram 128/256MB??

Hi
I saw that on the specs page that hAP ac^2 is declared to be with 128MB ram.
On the other hand some people who claims thar they got a device with 256MB.
How can i make sure that my order will be with 256MB?
Fri Jun 26, 2020 6:12 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

I mentioned 500mb as the wan link speed. 500/500 (currently its 200mbit up /200mbit down. If the hEX s could manage that i though to connect two hAP ac^2 (one in the main room and second in one of the rooms with the PoE of the heEX s. If it could make 400mb out of the 500mb in wifi it will be great....
Fri Jun 26, 2020 5:39 pm
Forum: RouterBOARD hardware
Topic: HAP AC2 or Hex for home use
Replies: 9
Views: 3624

### Re: HAP AC2 or Hex for home use

Ac seems to be with more features like PoE and SFP but ac^2 has better CPU (quad vs single in AC Model)
Fri Jun 26, 2020 5:12 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

:-) No i don't have the hAP ac, I just wanted to understand if it worth to buy it in 2020 since I know this model runs for 4 years already. I have ordered hEX s so I could have the mikrotik experience and I wanted to add APs so I ask what would be better for best performance with low budget. regards...
Fri Jun 26, 2020 4:43 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

I dont have hAP ac.
I will have hEX s only. So to sum it up its better to put tplink than cAP ac or hAP ac. Right?

The only cons in this setup is that i cannot have the AP controlled centraly by mikrotik.
Fri Jun 26, 2020 2:48 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

I have replaced a CAPAC in one location with a TPLink eap245 and so far it seems more stable. However I was also having issues with my router at the time, that may have been the root cause. However, I still have another capac working in the house and will probably put my spare capac in another loca...
Fri Jun 26, 2020 2:43 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Ok lets focus my question,
Which mikrotik ap will be strong as hAP ac?
Audience, wifi version of 4011.
Unortanetly Audience and 4011 are ~\$160
Which is out of my budget..
Fri Jun 26, 2020 2:22 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Ok lets focus my question,
Which mikrotik ap will be strong as hAP ac?
Fri Jun 26, 2020 12:52 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

By the way which recommended APs like strenght of hAP ac?
Fri Jun 26, 2020 1:03 am
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Thank you
Thu Jun 25, 2020 10:41 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

With 2x2 and 80MHz width they both show around 400-450-500 in tests, that means in real life with walls, etc. you will have around 300. In case you have a 3x3 device, you can benefit from hAP ac, but not in the sense that you will get 900 (because of CPU bottleneck), but rather in sense that you wi...
Thu Jun 25, 2020 8:46 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

So hapac still rocks even as AP, but not sure if it worth the money now and what will hapen in 1 year from now.
Unfortunately ac^3 is out of scope.
Thu Jun 25, 2020 8:39 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Thank you xvo
So do we have a challenge for getting 1 gb on hEX s?
Thu Jun 25, 2020 7:14 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Next question,
cAP AP will be similar by Ac speed as hAP ac does?
Thu Jun 25, 2020 6:01 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Thank you so much for that answers that really covers everthing. Its the first time that someone really says: hAP ac is too old. hAP ac^2 is not the best wifi solution so i should stick with another AP solution. hEX s will be good as the router. Regards the 1 gig i must say that for now i am on 200/...
Thu Jun 25, 2020 5:34 pm
Forum: Wireless Networking
Topic: Mikrotik ROS and support for AC wave2 MU-MIMO﻿?
Replies: 28
Views: 6037

### Re: Mikrotik ROS and support for AC wave2 MU-MIMO﻿?

From my understanding its not supported on OS
Thu Jun 25, 2020 5:10 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

so I can make it as the follow:

ISP > hEX s > hAP ac

or i still need ac^2?

so

ISP > ac^2 > hAP ac

or

ISP > hAP ac

or

ISP > ac^2 > ac^2 (which won't give the best wifi solution)
Thu Jun 25, 2020 4:59 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Thanks for the diagrams, did you mention hEX s or hEX ? I talked about hEX s (RB760iGS) why do I need two uplinks between the hex s to the hAP AC^2? so I will be able to make 1 Gb through it? so on the other hand I could just make hAP ac^2 as a router gateway (if I will need sfp i will just need OLT...
Thu Jun 25, 2020 4:20 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Good idea
Tnx!
Thu Jun 25, 2020 4:13 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

I understand your point, and the reason I am asking so so much time is that Mikrotik support told me that hAP ac and hAP ac^2 will be working properly with 200mb /500mb with no problems, they recommended the hAP ac as they claim that its stronger (wifi and in general) - what makes me wonder how is i...
Thu Jun 25, 2020 3:26 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

HeX s as gateway + hAP ac won't be good? For 200 or 500 mbit?
Wed Jun 24, 2020 10:35 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

I am waiting for hEX s to arrive, supposed to be as main router. Should i add hAP ac^2 to that or hAP ac?

Should i sell it and take hAP ac^2 as the main router and add another hAP ac^2 as another AP or hAP ac?

The RB4011 is over the budget for me.
Wed Jun 24, 2020 10:27 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

I really appreciate your answer, and I understand that i am going to need two units. I will try to make a diagram of how it looks like, its 100^2 sqr meter. All rooms will have ethernet socket near the Tv, Since the main router is going to be in a closet near the entrance and the main room will be w...
Wed Jun 24, 2020 7:53 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

And hap ac? Will it go anyhow up to 867?
So... which should go for? Ac2 or ac??? Final vote

Or hex s plus hap ac as ap?
Wed Jun 24, 2020 7:27 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

Sorry i missed that part ac^2 will do up to 887mb on wifi??
Wed Jun 24, 2020 6:16 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

how do you check basically which card do i have on my mbair ?
Wed Jun 24, 2020 4:32 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

the ac2 doesn't have 3x3 only ac has.
Wed Jun 24, 2020 3:12 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

Isnt it the reason to take hap ac?
Wed Jun 24, 2020 1:22 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

Hi, I can confirm that the hAP AC connects with 3 chans to a newer MacBookPro on 1G+ Thruput tested with iperf3 from this MBP to a server on the wired part of my local network On 1GB wire I get approx 960Mbit/s On 5GHz wifi I get approx 530Mbit/s This 530Mbit/s seems about the max because the hAP A...
Wed Jun 24, 2020 1:20 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

thank you so much
Wed Jun 24, 2020 12:22 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Anav,
What will be the max throughput hAP ac could handle?
Over wifi and lan
Wed Jun 24, 2020 9:33 am
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

so it's hap ac vs ac2.
hap ac2 is cheaper, i think, and has faster processor. but if wifi is not good, you're better off with ac.
check around and report, which one has a better wifi

I need to choose
But i dont know which will give better performance in long term
Wed Jun 24, 2020 9:29 am
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

I was thinking the same and router should stay as a router and ap for wifi. Thats the reason i took hEX s. I just thinking if the sfp is a must or maybe i should take two units of ac^2 one as a gw and second as ap. It will be quite the same price of taking one hap ac. I must say that i am willing to...
Wed Jun 24, 2020 9:21 am
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

Yes i prefer to have switch available
But i think that hap ac has a bottleneck cpu...
Wed Jun 24, 2020 9:10 am
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

So hap ac2 is the killer but with the less features
Tue Jun 23, 2020 11:44 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

If hap ac is the most expensive unit it means that its the best?
Hap ac and wap ac has 3 chain....
Tue Jun 23, 2020 11:15 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

Thanks looka! I will check between them.
Tue Jun 23, 2020 10:28 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

Audience is high budget for me
Tue Jun 23, 2020 9:39 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

hEX s + hAP ac or hEX s + hAP ac^2?
Tue Jun 23, 2020 9:04 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

I wonder if i should take hAP ac^2 to be added to hEX s or jusr wait for wifi6.
Does the hEX s is stronger from ac^2 as a gateway?

Does it still worth to buy hAP ac this days?
Tue Jun 23, 2020 8:22 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Can some1 confirm If on wifi hAP ac gives max of 500mb and hAP ac^2 is up to 300mb ?
Also overal load hAP ac could manage?
Tue Jun 23, 2020 8:16 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Thats a nice stuff!! I am low on budget so i prefer to buy exactly what is needed to my setup. I want to thank you all for that thread even though i was just shocked earlier. I will update once i will get the hex s i hope that he will do the magic and will handle the traffic on 200/200 easily. About...
Tue Jun 23, 2020 7:34 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

I'd be looking into Audience + hex s combo.
I don't see any improvements on my hap ac, which i use as ap. perhaps minor in range through walls, with the dynamic noise adaptation setting.
Tue Jun 23, 2020 5:51 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Wow.
Tue Jun 23, 2020 4:03 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

hAP ac with it's tripple-chain wireless radios can give 50% higher throughput ... with clients that support (at least) 3 chains. Many (possibly most) clients support 2 chains and in this case hAP ac in optimal radio conditions doesn't gain anything (compared to hAP ac2). In sub-optimal radio condit...
Tue Jun 23, 2020 2:51 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Ok and what about having better wifi with hAP ac? Will it be better with hAP ac with combination of hEX s?
Tue Jun 23, 2020 10:20 am
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Are you sure that the heX s won't handle 1000/100? I have seen people gets it on screenshot on amazon.

Also here
https://www.reddit.com/r/mikrotik/comme ... on/fros1td
Mon Jun 22, 2020 11:56 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Well since sfp was of my needs at the first place i was looking on hAP ac instead of using OLT device,
When I understood that hAP ac is out of the game
i was thinking of using hEX s with cAP ac or hAP ac^2 for better flexibility...so here i am asking for ideas from people who knows
Mon Jun 22, 2020 11:21 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Mon Jun 22, 2020 11:19 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

See from that review about the hEX S
Speed rate
https://www.amazon.com/review/reviews-l ... B07F7HDRKX
Mon Jun 22, 2020 11:09 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

hEX s not hEX What will be the ac speed of hAP ac compared to hAP ac^2? I am talking of 100 m^2 square apartment with standard walls. What is the layout of the apartment and where will the device be located and where are there other wired outlets? NOTE: in terms of processor and testing, hex and he...
Mon Jun 22, 2020 11:01 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Because i have hex s on delivery already...
Mon Jun 22, 2020 10:48 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

So routing plus wireless
hAP ac + hEX S (RB760iGS) ?
Or hEX s + ac^2?
I have to pick up with something because as it looks for now i will need to send back the hEX s ....
Mon Jun 22, 2020 10:35 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

I must say that everytime i get different answers From mikrotik support i was told that hAP ac will be more solid for wifi and overal performance and hAP ac^2 will be good for most of the wifi coverage situation. Now i understand the oposite that hAP ac is too old to be usable for 1000/100 or even t...
Mon Jun 22, 2020 10:27 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Oh.. so i should get hAP Ac^2 for best performance?

Will the hEX s handle 200/200?
Mon Jun 22, 2020 9:50 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Its just in the center of the apartment
Most of the wifi devices are in the radius within 10 to 20 meters from the router.
I had a feeling that hEX s is the mosr powerfull of the 3 compared to hAP ac and hAP ac^2 isn't it?
Mon Jun 22, 2020 8:45 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

hEX s not hEX

What will be the ac speed of hAP ac compared to hAP ac^2?
I am talking of 100 m^2 square apartment with standard walls.
Mon Jun 22, 2020 8:12 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### Re: hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Hello Thanks for your answers I will give some brief of my current setup and what i am willing to achieve. I have fiber 200/200 connection which is configured with meraki device model MR33. Soon i will probably upgrade the link to 500/100 or 1000/100 . Currently my MR33 can be reachable on ac speed ...
Mon Jun 22, 2020 5:54 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 in 2020
Replies: 3
Views: 769

### Re: hAP ac or hAP ac^2 in 2020

Thanks for all of that info being shared. I got hex s because i was told that it will achieve 1gb wan to lan. Regards the wifi for now i have Meraki mr33 that the link speed is 867mb. I wanted to have mikrotik device that will be handle as close to 1gig as it can. Since i know that hAP ac should be ...
Mon Jun 22, 2020 12:48 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 moderator please do not delete this post [SOLVED]
Replies: 77
Views: 10661

### hAP ac or hAP ac^2 moderator please do not delete this post[SOLVED]

Hi guys
I need your help to decide which hAP device i should take that will be able to achieve 1000/100 link over Wifi with AC1750 as hAP ac claims to do
Will it be a real difference between hAP ac^2 to hAP ac?
Sun Jun 21, 2020 11:16 pm
Forum: Wireless Networking
Topic: hAP ac or hAP ac^2 in 2020
Replies: 3
Views: 769

### hAP ac or hAP ac^2 in 2020

Hello I just made an order of hEX s for my fiber 200/200 (will be upgraded to 1000/100) Considering my wifi device , currently i have Meraki mr33 and on my MB i could get 867mb. I wonder if i change to Mikrotik decide for Wifi Is there any different to choose hAP ac over hAP ac^2 considering the dif...
Sun Jun 21, 2020 6:41 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 14222

### Re: hAP ac 5GHz max speed

I am considering buying hAP ac is there any improvement on the wifi on 5g speed? Currently in my list is hEX S as a router.